| cItpSpVariant |
.1.3.6.1.4.1.9.9.232.1.1.1 |
|
The SS7 variant implemented in this SP.
|
| cItpSpCLLICode |
.1.3.6.1.4.1.9.9.232.1.1.2 |
|
Common Language Location Codes (CLLI Codes).
|
| cItpSpDisplayName |
.1.3.6.1.4.1.9.9.232.1.1.3 |
|
A short identifier for the Signalling point.
This value can be set by system administrator
or defaults to the local point code formatted
as an ASCII string.
|
| cItpSpDescription |
.1.3.6.1.4.1.9.9.232.1.1.4 |
|
A textual description for the Signalling point.
|
| cItpSpMtp2T01 |
.1.3.6.1.4.1.9.9.232.1.1.5 |
|
Alignment ready timer.
|
| cItpSpMtp2T02 |
.1.3.6.1.4.1.9.9.232.1.1.6 |
|
Not aligned timer.
|
| cItpSpMtp2T03 |
.1.3.6.1.4.1.9.9.232.1.1.7 |
|
Aligned timer.
|
| cItpSpMtp2T04E |
.1.3.6.1.4.1.9.9.232.1.1.8 |
|
Proving period timer emergency timer.
|
| cItpSpMtp2T04N |
.1.3.6.1.4.1.9.9.232.1.1.9 |
|
Proving period timer normal timer.
|
| cItpSpMtp2T05 |
.1.3.6.1.4.1.9.9.232.1.1.10 |
|
Sending SIB timer.
|
| cItpSpMtp2T06 |
.1.3.6.1.4.1.9.9.232.1.1.11 |
|
Remote congestion timer.
|
| cItpSpMtp2T07 |
.1.3.6.1.4.1.9.9.232.1.1.12 |
|
Excessive delay of acknowledgement timer.
|
| cItpSpMtp3T01 |
.1.3.6.1.4.1.9.9.232.1.1.13 |
|
Delay to avoid message mis-sequencing on changeover.
|
| cItpSpMtp3T02 |
.1.3.6.1.4.1.9.9.232.1.1.14 |
|
Waiting for changeover acknowledgement.
|
| cItpSpMtp3T03 |
.1.3.6.1.4.1.9.9.232.1.1.15 |
|
Time controlled diversion-delay to avoid
mis-sequencing on change back.
|
| cItpSpMtp3T04 |
.1.3.6.1.4.1.9.9.232.1.1.16 |
|
Waiting for change back acknowledgement (first
attempt).
|
| cItpSpMtp3T05 |
.1.3.6.1.4.1.9.9.232.1.1.17 |
|
Waiting for change back acknowledgement (second
attempt).
|
| cItpSpMtp3T06 |
.1.3.6.1.4.1.9.9.232.1.1.18 |
|
Delay to avoid message mis-sequencing on controlled
rerouting.
|
| cItpSpMtp3T07 |
.1.3.6.1.4.1.9.9.232.1.1.19 |
|
Waiting for Signalling data link connection
acknowledgement.
|
| cItpSpMtp3T08 |
.1.3.6.1.4.1.9.9.232.1.1.20 |
|
Transfer prohibited inhibition timer (transient
solution).
|
| cItpSpMtp3T10 |
.1.3.6.1.4.1.9.9.232.1.1.21 |
|
Waiting to repeat Signalling routeset test message.
|
| cItpSpMtp3T11 |
.1.3.6.1.4.1.9.9.232.1.1.22 |
|
Transfer restricted timer. (This is one way of
implementing the function described in 13.4/Q.704 and
mainly intended to simplify SPs.).
|
| cItpSpMtp3T12 |
.1.3.6.1.4.1.9.9.232.1.1.23 |
|
Waiting for uninhibit acknowledgement.
|
| cItpSpMtp3T13 |
.1.3.6.1.4.1.9.9.232.1.1.24 |
|
Waiting for force uninhibit.
|
| cItpSpMtp3T14 |
.1.3.6.1.4.1.9.9.232.1.1.25 |
|
Waiting for inhibition acknowledgement.
|
| cItpSpMtp3T15 |
.1.3.6.1.4.1.9.9.232.1.1.26 |
|
Waiting to start Signalling routeset congestion
test.
|
| cItpSpMtp3T16 |
.1.3.6.1.4.1.9.9.232.1.1.27 |
|
Waiting for routeset congestion status update.
|
| cItpSpMtp3T17 |
.1.3.6.1.4.1.9.9.232.1.1.28 |
|
Delay to avoid oscillation of initial alignment
failure and link restart.
|
| cItpSpMtp3T18 |
.1.3.6.1.4.1.9.9.232.1.1.29 |
|
This timers servers different function based on the
variant.
ANSI: Repeat TFR once by response method
ITU: MTP restart link supervision
|
| cItpSpMtp3T19 |
.1.3.6.1.4.1.9.9.232.1.1.30 |
|
This timers servers different function based on the
variant.
ANSI: failed craft timer referral timer
ITU: supervision timer during MTP restart
|
| cItpSpMtp3T20 |
.1.3.6.1.4.1.9.9.232.1.1.31 |
|
This timers servers different function based on the
variant.
ANSI: waiting to repeat local inhibit test
ITU: MTP restart timer at the Signalling point
|
| cItpSpMtp3T21 |
.1.3.6.1.4.1.9.9.232.1.1.32 |
|
This timers servers different function based on the
variant.
ANSI: waiting to repeat remote inhibit test)
ITU: MTP restart timer at adjacent Signalling point
|
| cItpSpMtp3T22 |
.1.3.6.1.4.1.9.9.232.1.1.33 |
|
This timers servers different function based on the
variant.
ANSI: restarting SP waiting for Signalling links avail
ITU: local inhibit test timer
|
| cItpSpMtp3T23 |
.1.3.6.1.4.1.9.9.232.1.1.34 |
|
This timers servers different function based on the
variant.
ANSI: restarting SP waiting to receive all TRA msgs
ITU: remote inhibit test timer
|
| cItpSpMtp3T24 |
.1.3.6.1.4.1.9.9.232.1.1.35 |
|
This timers servers different function based on the
variant.
ANSI: restarting SP waiting to broadcast all TRA msgs
ITU: stabilizing timer after local processor outage
|
| cItpSpMtp3T25 |
.1.3.6.1.4.1.9.9.232.1.1.36 |
|
Timer at Signalling point (SP) adjacent to restarting
SP, waiting for traffic restart allowed message.
|
| cItpSpMtp3T26 |
.1.3.6.1.4.1.9.9.232.1.1.37 |
|
Timer at restarting SP waiting to repeat traffic
restart waiting message.
|
| cItpSpMtp3T27 |
.1.3.6.1.4.1.9.9.232.1.1.38 |
|
Minimum duration of unavailability for full restart.
|
| cItpSpMtp3T28 |
.1.3.6.1.4.1.9.9.232.1.1.39 |
|
Timer at SP adjacent to restarting SP waiting for
traffic restart waiting message.
|
| cItpSpMtp3T29 |
.1.3.6.1.4.1.9.9.232.1.1.40 |
|
Timer started when TRA sent in response to unexpected
TRA or TRW.
|
| cItpSpMtp3T30 |
.1.3.6.1.4.1.9.9.232.1.1.41 |
|
Timer to limit sending of TFPs and TFRs in response
to unexpected TRA or TRW.
|
| cItpSpMtp3T31 |
.1.3.6.1.4.1.9.9.232.1.1.42 |
|
False link congestion detection timer.
|
| cItpSpMtp3T32 |
.1.3.6.1.4.1.9.9.232.1.1.43 |
|
Link oscillation timer - Procedure A.
|
| cItpSpMtp3T33 |
.1.3.6.1.4.1.9.9.232.1.1.44 |
|
Probation timer for link oscillation - Procedure B.
|
| cItpSpMtp3T34 |
.1.3.6.1.4.1.9.9.232.1.1.45 |
|
Suspension timer for link oscillation - Procedure B.
|
| cItpSpTimerLinkTest |
.1.3.6.1.4.1.9.9.232.1.1.46 |
|
Signalling Link test acknowledgement timer.
|
| cItpSpTimerLinkMessage |
.1.3.6.1.4.1.9.9.232.1.1.47 |
|
Interval timer for sending test messages.
|
| cItpSpTimerLinkActRetry |
.1.3.6.1.4.1.9.9.232.1.1.48 |
|
Link activation retry timer.
|
| cItpSpTFR |
.1.3.6.1.4.1.9.9.232.1.1.49 |
|
Allow transfer restricted messages.
'true' TFR are allowed.
'false' TFR are disabled.
|
| cItpSpCongestionsLevels |
.1.3.6.1.4.1.9.9.232.1.1.50 |
|
Allow multiple congestion levels.
'true' multiple congestion levels are allowed.
'false' multiple congestion levels are disabled.
|
| cItpSpFastRestart |
.1.3.6.1.4.1.9.9.232.1.1.51 |
|
The support for fast restarts as follows.
'true' fast restart is enabled.
'false' fast restart is disabled.
|
| cItpSpDistSccpUnseq |
.1.3.6.1.4.1.9.9.232.1.1.52 |
|
Evenly distribute Class 0 SCCP messages as follows.
'true' Evenly distribute 0 SCCP messages is enabled.
'false' Evenly distribute 0 SCCP messages is disabled.
|
| cItpSpSummaryRoutingException |
.1.3.6.1.4.1.9.9.232.1.1.53 |
|
This object is used to control the usage of the summary
route when both a summary route (or ANSI cluster route)
and a full point-code route (within that summary) are
configured. The object is used to indicate whether
the summary route is to be used when the full
point-code destination is inaccessible as follows.
'true' Use summary routing.
'false' Do not use summary routing.
|
| cItpSpUtilSampleInterval |
.1.3.6.1.4.1.9.9.232.1.1.54 |
|
This object specifies the time interval used to monitor
the utilization of SS7 links. This object in combination
with cItpSpUtilThreshold, cItpSpLinkPlanCapacitySent and
cItpSpLinkPlanCapacityRcvd will be used to calculate
utilization of SS7 links. Changes to the polling interval
will take effect after the completion of the current
sample interval.
|
| cItpSpUtilThreshold |
.1.3.6.1.4.1.9.9.232.1.1.55 |
|
This object specifies the threshold of usage for all
SS7 links in SP. This object is used to determine when
to generate the cItpSpLinkRcvdUtilChange or
cItpSpLinkSentUtilChange notifications.
A value of zero indicates that no default threshold
is specified. Therefore, only links with non-zero
values for cItpSpLinkUtilThresholdRcvd or
cItpSpLinkUtilThresholdSent will generate notifications
based on link utilization.
Changes to the utilization threshold will take effect
at the end of the current interval.
|
| cItpSpUtilAbateDelta |
.1.3.6.1.4.1.9.9.232.1.1.56 |
|
This object allows the falling threshold to be lower
than the rising theshold when calculating whether to
generate the cItpSpLinkUtilThresholdRcvd or
cItpSpLinkUtilThresholdSent notifications. This is done
to prevent generating notifications for slight changes
in traffic.
|
| cItpSpPointCodeTableEntry |
.1.3.6.1.4.1.9.9.232.1.2.1.1 |
|
A list of SP attributes.
|
| cItpSpLinksetTableEntry |
.1.3.6.1.4.1.9.9.232.1.3.1.1 |
|
A list of SP linkset attributes for a particular SP
entity.
|
| cItpSpLinkTableEntry |
.1.3.6.1.4.1.9.9.232.1.4.1.1 |
|
A list of SP link attributes.
|
| cItpSpLsStateChangeNotifEnabled |
.1.3.6.1.4.1.9.9.232.1.5.1 |
|
The SP linkset notification truth value.
'true' Indicates that cItpSpLinksetStateChange
notification is to be generated when the state
changes. That is, the notification generation
is enabled.
'false' Indicates that cItpSpLinksetStateChange
notification generation is disabled.
|
| cItpSpLnkStateChangeNotifEnabled |
.1.3.6.1.4.1.9.9.232.1.5.2 |
|
The SP link notification truth value.
'true' Indicates that cItpSpLinkStateChange
notification is to be generated when the state
changes. That is, the notification generation
is enabled.
'false' Indicates that cItpSpLinkStateChange
notification generation is disabled.
|
| cItpSpCongestionNotifEnabled |
.1.3.6.1.4.1.9.9.232.1.5.3 |
|
The SP Congestion notification truth value.
'true' Indicates that cItpSpCongestionChange
notification is to be generated when the state
changes. That is, the notification generation
is enabled.
'false' Indicates that cItpSpCongestionChange
notification generation is disabled.
|
| cItpSpLinkUtilNotifEnabled |
.1.3.6.1.4.1.9.9.232.1.5.4 |
|
The SP link utilization notification truth value.
'true' Indicates that the notification of link
utilization has been enabled. That is,
the notification generation is enabled.
'false' Indicates that the notification link
utilization has been disabled.
|
| cItpSpPointCodeNi |
.1.3.6.1.4.1.9.9.232.1.2.1.1.1 |
|
The network Indicator for this pointcode.
|
| cItpSpPointCodeBin |
.1.3.6.1.4.1.9.9.232.1.2.1.1.2 |
|
The point code for this SP.
|
| cItpSpPointCodeType |
.1.3.6.1.4.1.9.9.232.1.2.1.1.3 |
|
The function of this point code
|
| cItpSpPointCodeDisplay |
.1.3.6.1.4.1.9.9.232.1.2.1.1.4 |
|
The point code for this SP.
|
| cItpSpPointCodeRowStatus |
.1.3.6.1.4.1.9.9.232.1.2.1.1.5 |
|
The object is used by a management station to
create or delete the row entry in cItpSpPointCodeTable
following the RowStatus textual convention.
|
| cItpSpLinksetName |
.1.3.6.1.4.1.9.9.232.1.3.1.1.1 |
|
The name of the linkset.
|
| cItpSpLinksetSourcePointCode |
.1.3.6.1.4.1.9.9.232.1.3.1.1.2 |
|
The point code to which this linkset is connected.
|
| cItpSpLinksetSourceDisplayPC |
.1.3.6.1.4.1.9.9.232.1.3.1.1.3 |
|
The point code to which this linkset is connected.
|
| cItpSpLinksetAdjacentPointCode |
.1.3.6.1.4.1.9.9.232.1.3.1.1.4 |
|
The point code to which this linkset is connected.
|
| cItpSpLinksetAdjacentDisplayPC |
.1.3.6.1.4.1.9.9.232.1.3.1.1.5 |
|
The point code to which this linkset is connected.
|
| cItpSpLinksetState |
.1.3.6.1.4.1.9.9.232.1.3.1.1.6 |
|
The list of possible linkset states.
'available' : Traffic may flow over this linkset
'shutdown' : This linkset has been forced to an
unavailable state by an administrative
action.
'unavailable': The linkset is currently unable to support
traffic. Activation of this linkset will
occur as required by protocol.
|
| cItpSpLinksetInboundAcl |
.1.3.6.1.4.1.9.9.232.1.3.1.1.7 |
|
Packets are filtered against this access control list
before they are passed to the routing function. A
value of zero indicates that no access control list
is present.
|
| cItpSpLinksetOutboundAcl |
.1.3.6.1.4.1.9.9.232.1.3.1.1.8 |
|
Packets are filtered against this access control list
after they have passed through the routing function.
A value of zero indicates that no access control list
is present.
|
| cItpSpLinksetSnmmRTN |
.1.3.6.1.4.1.9.9.232.1.3.1.1.9 |
|
The routing table for Signalling network management
messages.
|
| cItpSpLinksetSntmRTN |
.1.3.6.1.4.1.9.9.232.1.3.1.1.10 |
|
The routing table for Signalling network test and
maintenance messages.
|
| cItpSpLinksetSpare2RTN |
.1.3.6.1.4.1.9.9.232.1.3.1.1.11 |
|
This routing table has been defined as a spare
routing table by the standards committee.
|
| cItpSpLinksetSccpRTN |
.1.3.6.1.4.1.9.9.232.1.3.1.1.12 |
|
The routing table for SS7 Signalling Connection
Control Part(SCCP) messages.
|
| cItpSpLinksetTupRTN |
.1.3.6.1.4.1.9.9.232.1.3.1.1.13 |
|
The routing table for Telephone User Part(TUP)
messages.
|
| cItpSpLinksetIsupRTN |
.1.3.6.1.4.1.9.9.232.1.3.1.1.14 |
|
The routing table for ISDN User Part messages.
|
| cItpSpLinksetDupcRTN |
.1.3.6.1.4.1.9.9.232.1.3.1.1.15 |
|
The routing table for Data User Part (call and
circuit-related messages).
|
| cItpSpLinksetDupfRTN |
.1.3.6.1.4.1.9.9.232.1.3.1.1.16 |
|
The routing table for Data User Part (facility
registration and cancellation messages).
|
| cItpSpLinksetMtupRTN |
.1.3.6.1.4.1.9.9.232.1.3.1.1.17 |
|
The routing table for MTP Testing User Part
messages.
|
| cItpSpLinksetBisupRTN |
.1.3.6.1.4.1.9.9.232.1.3.1.1.18 |
|
The routing table for Broadband ISDN User Part(BISUP)
messages.
|
| cItpSpLinksetSisupRTN |
.1.3.6.1.4.1.9.9.232.1.3.1.1.19 |
|
The routing table for Satellite ISDN User Part(SISUP)
messages.
|
| cItpSpLinksetSpare11RTN |
.1.3.6.1.4.1.9.9.232.1.3.1.1.20 |
|
This routing table has been defined as a spare
routing table by the standards committee.
|
| cItpSpLinksetSpare12RTN |
.1.3.6.1.4.1.9.9.232.1.3.1.1.21 |
|
This routing table has been defined as a spare
routing table by the standards committee.
|
| cItpSpLinksetSpare13RTN |
.1.3.6.1.4.1.9.9.232.1.3.1.1.22 |
|
This routing table has been defined as a spare
routing table by the standards committee.
|
| cItpSpLinksetSpare14RTN |
.1.3.6.1.4.1.9.9.232.1.3.1.1.23 |
|
This routing table has been defined as a spare
routing table by the standards committee.
|
| cItpSpLinksetSpare15RTN |
.1.3.6.1.4.1.9.9.232.1.3.1.1.24 |
|
This routing table has been defined as a spare
routing table by the standards committee.
|
| cItpSpLinksetAccountingEnabled |
.1.3.6.1.4.1.9.9.232.1.3.1.1.25 |
|
This indicates if accounting for this linkset is
enabled.
'true' Indicates that the accounting function is
enabled for this linkset and is being
accumulated in cItpSpAccountingTable.
'false' Indicates that the accounting function is
disabled.
|
| cItpSpLinksetNumLinks |
.1.3.6.1.4.1.9.9.232.1.3.1.1.26 |
|
The number of links in this linkset.
|
| cItpSpLinksetDurationInService |
.1.3.6.1.4.1.9.9.232.1.3.1.1.27 |
|
Time linkset was providing service related to
Q752/Table 4.2.
|
| cItpSpLinksetDurationOutService |
.1.3.6.1.4.1.9.9.232.1.3.1.1.28 |
|
Time linkset was Out-of-Service as required for
Q752/Table 4.2.
|
| cItpSpLinksetMtp2T01 |
.1.3.6.1.4.1.9.9.232.1.3.1.1.29 |
|
Alignment ready timer.
|
| cItpSpLinksetMtp2T02 |
.1.3.6.1.4.1.9.9.232.1.3.1.1.30 |
|
Not aligned timer.
|
| cItpSpLinksetMtp2T03 |
.1.3.6.1.4.1.9.9.232.1.3.1.1.31 |
|
Aligned timer.
|
| cItpSpLinksetMtp2T04E |
.1.3.6.1.4.1.9.9.232.1.3.1.1.32 |
|
Proving period timer emergency timer.
|
| cItpSpLinksetMtp2T04N |
.1.3.6.1.4.1.9.9.232.1.3.1.1.33 |
|
Proving period timer normal timer.
|
| cItpSpLinksetMtp2T05 |
.1.3.6.1.4.1.9.9.232.1.3.1.1.34 |
|
Sending SIB timer.
|
| cItpSpLinksetMtp2T06 |
.1.3.6.1.4.1.9.9.232.1.3.1.1.35 |
|
Remote congestion timer.
|
| cItpSpLinksetMtp2T07 |
.1.3.6.1.4.1.9.9.232.1.3.1.1.36 |
|
Excessive delay of acknowledgement timer.
|
| cItpSpLinksetMtp3T01 |
.1.3.6.1.4.1.9.9.232.1.3.1.1.37 |
|
Delay to avoid message mis-sequencing on changeover.
|
| cItpSpLinksetMtp3T02 |
.1.3.6.1.4.1.9.9.232.1.3.1.1.38 |
|
Waiting for changeover acknowledgement.
|
| cItpSpLinksetMtp3T03 |
.1.3.6.1.4.1.9.9.232.1.3.1.1.39 |
|
Time controlled diversion-delay to avoid
mis-sequencing on change back.
|
| cItpSpLinksetMtp3T04 |
.1.3.6.1.4.1.9.9.232.1.3.1.1.40 |
|
Waiting for change back acknowledgement (first
attempt).
|
| cItpSpLinksetMtp3T05 |
.1.3.6.1.4.1.9.9.232.1.3.1.1.41 |
|
Waiting for change back acknowledgement (second
attempt).
|
| cItpSpLinksetMtp3T06 |
.1.3.6.1.4.1.9.9.232.1.3.1.1.42 |
|
Delay to avoid message mis-sequencing on controlled
rerouting.
|
| cItpSpLinksetMtp3T07 |
.1.3.6.1.4.1.9.9.232.1.3.1.1.43 |
|
Waiting for Signalling data link connection
acknowledgement.
|
| cItpSpLinksetMtp3T08 |
.1.3.6.1.4.1.9.9.232.1.3.1.1.44 |
|
Transfer prohibited inhibition timer (transient
solution).
|
| cItpSpLinksetMtp3T10 |
.1.3.6.1.4.1.9.9.232.1.3.1.1.45 |
|
Waiting to repeat Signalling routeset test message.
|
| cItpSpLinksetMtp3T11 |
.1.3.6.1.4.1.9.9.232.1.3.1.1.46 |
|
Transfer restricted timer. (This is one way of
implementing the function described in 13.4/Q.704 and
mainly intended to simplify SPs.).
|
| cItpSpLinksetMtp3T12 |
.1.3.6.1.4.1.9.9.232.1.3.1.1.47 |
|
Waiting for uninhibit acknowledgement.
|
| cItpSpLinksetMtp3T13 |
.1.3.6.1.4.1.9.9.232.1.3.1.1.48 |
|
Waiting for force uninhibit.
|
| cItpSpLinksetMtp3T14 |
.1.3.6.1.4.1.9.9.232.1.3.1.1.49 |
|
Waiting for inhibition acknowledgement.
|
| cItpSpLinksetMtp3T15 |
.1.3.6.1.4.1.9.9.232.1.3.1.1.50 |
|
Waiting to start Signalling routeset congestion
test.
|
| cItpSpLinksetMtp3T16 |
.1.3.6.1.4.1.9.9.232.1.3.1.1.51 |
|
Waiting for routeset congestion status update.
|
| cItpSpLinksetMtp3T17 |
.1.3.6.1.4.1.9.9.232.1.3.1.1.52 |
|
Delay to avoid oscillation of initial alignment
failure and link restart.
|
| cItpSpLinksetMtp3T18 |
.1.3.6.1.4.1.9.9.232.1.3.1.1.53 |
|
This timers servers different function based on the
variant.
ANSI: Repeat TFR once by response method
ITU: MTP restart link supervision
|
| cItpSpLinksetMtp3T19 |
.1.3.6.1.4.1.9.9.232.1.3.1.1.54 |
|
This timers servers different function based on the
variant.
ANSI: failed craft timer referral timer
ITU: supervision timer during MTP restart
|
| cItpSpLinksetMtp3T20 |
.1.3.6.1.4.1.9.9.232.1.3.1.1.55 |
|
This timers servers different function based on the
variant.
ANSI: waiting to repeat local inhibit test
ITU: MTP restart timer at the Signalling point
|
| cItpSpLinksetMtp3T21 |
.1.3.6.1.4.1.9.9.232.1.3.1.1.56 |
|
This timers servers different function based on the
variant.
ANSI: waiting to repeat remote inhibit test)
ITU: MTP restart timer at adjacent Signalling point
|
| cItpSpLinksetMtp3T22 |
.1.3.6.1.4.1.9.9.232.1.3.1.1.57 |
|
This timers servers different function based on the
variant.
ANSI: restarting SP waiting for Signalling links avail
ITU: local inhibit test timer
|
| cItpSpLinksetMtp3T23 |
.1.3.6.1.4.1.9.9.232.1.3.1.1.58 |
|
This timers servers different function based on the
variant.
ANSI: restarting SP waiting to receive all TRA msgs
ITU: remote inhibit test timer
|
| cItpSpLinksetMtp3T24 |
.1.3.6.1.4.1.9.9.232.1.3.1.1.59 |
|
This timers servers different function based on the
variant.
ANSI: restarting SP waiting to broadcast all TRA msgs
ITU: stabilizing timer after local processor outage
|
| cItpSpLinksetMtp3T25 |
.1.3.6.1.4.1.9.9.232.1.3.1.1.60 |
|
Timer at Signalling Point (SP) adjacent to restarting
SP, waiting for traffic restart allowed message.
|
| cItpSpLinksetMtp3T26 |
.1.3.6.1.4.1.9.9.232.1.3.1.1.61 |
|
Timer at restarting SP waiting to repeat traffic
restart waiting message.
|
| cItpSpLinksetMtp3T27 |
.1.3.6.1.4.1.9.9.232.1.3.1.1.62 |
|
Minimum duration of unavailability for full restart.
|
| cItpSpLinksetMtp3T28 |
.1.3.6.1.4.1.9.9.232.1.3.1.1.63 |
|
Timer at SP adjacent to restarting SP waiting for
traffic restart waiting message.
|
| cItpSpLinksetMtp3T29 |
.1.3.6.1.4.1.9.9.232.1.3.1.1.64 |
|
Timer started when TRA sent in response to unexpected
TRA or TRW.
|
| cItpSpLinksetMtp3T30 |
.1.3.6.1.4.1.9.9.232.1.3.1.1.65 |
|
Timer to limit sending of TFPs and TFRs in response
to unexpected TRA or TRW.
|
| cItpSpLinksetMtp3T31 |
.1.3.6.1.4.1.9.9.232.1.3.1.1.66 |
|
False link congestion detection timer.
|
| cItpSpLinksetMtp3T32 |
.1.3.6.1.4.1.9.9.232.1.3.1.1.67 |
|
Link oscillation timer - Procedure A.
|
| cItpSpLinksetMtp3T33 |
.1.3.6.1.4.1.9.9.232.1.3.1.1.68 |
|
Probation timer for link oscillation - Procedure B.
|
| cItpSpLinksetMtp3T34 |
.1.3.6.1.4.1.9.9.232.1.3.1.1.69 |
|
Suspension timer for link oscillation - Procedure B.
|
| cItpSpLinksetTimerLinkTest |
.1.3.6.1.4.1.9.9.232.1.3.1.1.70 |
|
Signalling Link test acknowledgement timer.
|
| cItpSpLinksetTimerLinkMessage |
.1.3.6.1.4.1.9.9.232.1.3.1.1.71 |
|
Interval timer for sending test messages.
|
| cItpSpLinksetTimerLinkActRetry |
.1.3.6.1.4.1.9.9.232.1.3.1.1.72 |
|
Link activation retry timer.
|
| cItpSpLinksetPlanCapacity |
.1.3.6.1.4.1.9.9.232.1.3.1.1.73 |
|
An estimate of the number of bits per second that is
expected to be transmitted over a linkset. This
attribute will be used by network management stations
to generate traps and maintain statistics on linksets
based on Stream Control Transmission Protocol.
The information for this attribute is specified via
CLI by the system administrator. A value of zero
for this object indicates that a planning capacity
has not been specified.
This objects has been deprecated and replaced by
cItpSpLinkPlanCapacityRcvd and
cItpSpLinkPlanCapacitySent objects.
|
| cItpSpLinksetActPriority |
.1.3.6.1.4.1.9.9.232.1.3.1.1.74 |
|
Defines the activation priority for linksets. Each
linkset can be defined a priority. The linkset with
the lowest values will be activated first. If two
linksets share the same values they will be
activated in the order they were defined.
|
| cItpSpLinksetType |
.1.3.6.1.4.1.9.9.232.1.3.1.1.75 |
|
The list of possible Signalling link types. All links
in the same linkset will be of the same type.
'A-link' : Access link
'B-link' : Bridge link
'C-link' : Cross link
'D-link' : Diagonal link
'E-link' : Fully associated link
|
| cItpSpLinksetRowStatus |
.1.3.6.1.4.1.9.9.232.1.3.1.1.76 |
|
The object is used by a management station to
create or delete the row entry in cItpSpLinksetTable
following the RowStatus textual convention.
|
| cItpSpLinksetNi |
.1.3.6.1.4.1.9.9.232.1.3.1.1.77 |
|
The Network Indicator in which the Linkset resides.
|
| cItpSpLinksetDisplayName |
.1.3.6.1.4.1.9.9.232.1.3.1.1.78 |
|
A short identifier for each linkset.
This value can be set by system administrator
or defaults to the linkset name.
|
| cItpSpLinksetDescription |
.1.3.6.1.4.1.9.9.232.1.3.1.1.79 |
|
A textual description for the Signalling point.
|
| cItpSpLinksetVariant |
.1.3.6.1.4.1.9.9.232.1.3.1.1.80 |
|
The SS7 variant used to format data transmitted
on this linkset.
|
| cItpSpLinkSlc |
.1.3.6.1.4.1.9.9.232.1.4.1.1.1 |
|
The Signalling Link Code for this link.
|
| cItpSpLinkDescription |
.1.3.6.1.4.1.9.9.232.1.4.1.1.2 |
|
A textual description for this link.
|
| cItpSpLinkState |
.1.3.6.1.4.1.9.9.232.1.4.1.1.3 |
|
The list of possible links states.
'available' : Traffic may flow over this linkset
'failed' : Traffic management has detected a failure
that prevents activating this linkset.
'shutdown' : This linkset has been forced to an
unavailable state by an administrative
action.
'unavailable': The linkset is currently unable to support
traffic. Activation of this linkset will
occur as required by protocol.
|
| cItpSpLinkType |
.1.3.6.1.4.1.9.9.232.1.4.1.1.4 |
|
The link type.
|
| cItpSpLinkifIndex |
.1.3.6.1.4.1.9.9.232.1.4.1.1.5 |
|
If the link type specified by cItpSpLinkType is serial
or hsl, this is the ifIndex specified in IF-MIB,
otherwise no significance is to be placed on this value.
|
| cItpSpLinkSctpAssociation |
.1.3.6.1.4.1.9.9.232.1.4.1.1.6 |
|
If the link type specified by cItpSpLinkType is 'sctpIp',
this is the association identifier defined in the
Stream Control Transmission Protocol(SCTP) MIB.
Where value greater than zero indicates
a valid association and zero one indicates an
invalid association. This value will always be set to
zero one when cItpSpLinkType is not equal to the
'sctpIp' value.
|
| cItpSpLinkMtp3PacketsRcvd |
.1.3.6.1.4.1.9.9.232.1.4.1.1.7 |
|
The number of MTP3 packets received by this link.
This measurement is specified in Q752/3.5
|
| cItpSpLinkMtp3PacketsSent |
.1.3.6.1.4.1.9.9.232.1.4.1.1.8 |
|
The number of MTP3 packets sent by this link.
This measurement is specified in Q752/3.3
|
| cItpSpLinkMtp3BytesRcvd |
.1.3.6.1.4.1.9.9.232.1.4.1.1.9 |
|
The number of MTP3 bytes received by this link.
This measurement is specified in Q752/3.4
|
| cItpSpLinkMtp3BytesSent |
.1.3.6.1.4.1.9.9.232.1.4.1.1.10 |
|
The number of MTP3 bytes sent by this link.
This measurement is specified in Q752/3.1
|
| cItpSpLinkMtp2T01 |
.1.3.6.1.4.1.9.9.232.1.4.1.1.11 |
|
Alignment ready timer.
|
| cItpSpLinkMtp2T02 |
.1.3.6.1.4.1.9.9.232.1.4.1.1.12 |
|
Not aligned timer.
|
| cItpSpLinkMtp2T03 |
.1.3.6.1.4.1.9.9.232.1.4.1.1.13 |
|
Aligned timer.
|
| cItpSpLinkMtp2T04E |
.1.3.6.1.4.1.9.9.232.1.4.1.1.14 |
|
Proving period timer emergency timer.
|
| cItpSpLinkMtp2T04N |
.1.3.6.1.4.1.9.9.232.1.4.1.1.15 |
|
Proving period timer normal timer.
|
| cItpSpLinkMtp2T05 |
.1.3.6.1.4.1.9.9.232.1.4.1.1.16 |
|
Sending SIB timer.
|
| cItpSpLinkMtp2T06 |
.1.3.6.1.4.1.9.9.232.1.4.1.1.17 |
|
Remote congestion timer.
|
| cItpSpLinkMtp2T07 |
.1.3.6.1.4.1.9.9.232.1.4.1.1.18 |
|
Excessive delay of acknowledgement timer.
|
| cItpSpLinkMtp3T01 |
.1.3.6.1.4.1.9.9.232.1.4.1.1.19 |
|
Delay to avoid message mis-sequencing on changeover.
|
| cItpSpLinkMtp3T02 |
.1.3.6.1.4.1.9.9.232.1.4.1.1.20 |
|
Waiting for changeover acknowledgement.
|
| cItpSpLinkMtp3T03 |
.1.3.6.1.4.1.9.9.232.1.4.1.1.21 |
|
Time controlled diversion-delay to avoid
mis-sequencing on change back.
|
| cItpSpLinkMtp3T04 |
.1.3.6.1.4.1.9.9.232.1.4.1.1.22 |
|
Waiting for change back acknowledgement (first
attempt).
|
| cItpSpLinkMtp3T05 |
.1.3.6.1.4.1.9.9.232.1.4.1.1.23 |
|
Waiting for change back acknowledgement (second
attempt).
|
| cItpSpLinkMtp3T06 |
.1.3.6.1.4.1.9.9.232.1.4.1.1.24 |
|
Delay to avoid message mis-sequencing on controlled
rerouting.
|
| cItpSpLinkMtp3T07 |
.1.3.6.1.4.1.9.9.232.1.4.1.1.25 |
|
Waiting for Signalling data link connection
acknowledgement.
|
| cItpSpLinkMtp3T08 |
.1.3.6.1.4.1.9.9.232.1.4.1.1.26 |
|
Transfer prohibited inhibition timer (transient
solution).
|
| cItpSpLinkMtp3T10 |
.1.3.6.1.4.1.9.9.232.1.4.1.1.27 |
|
Waiting to repeat Signalling routeset test message.
|
| cItpSpLinkMtp3T11 |
.1.3.6.1.4.1.9.9.232.1.4.1.1.28 |
|
Transfer restricted timer. (This is one way of
implementing the function described in 13.4/Q.704 and
mainly intended to simplify SPs.).
|
| cItpSpLinkMtp3T12 |
.1.3.6.1.4.1.9.9.232.1.4.1.1.29 |
|
Waiting for uninhibit acknowledgement.
|
| cItpSpLinkMtp3T13 |
.1.3.6.1.4.1.9.9.232.1.4.1.1.30 |
|
Waiting for force uninhibit.
|
| cItpSpLinkMtp3T14 |
.1.3.6.1.4.1.9.9.232.1.4.1.1.31 |
|
Waiting for inhibition acknowledgement.
|
| cItpSpLinkMtp3T15 |
.1.3.6.1.4.1.9.9.232.1.4.1.1.32 |
|
Waiting to start Signalling routeset congestion
test.
|
| cItpSpLinkMtp3T16 |
.1.3.6.1.4.1.9.9.232.1.4.1.1.33 |
|
Waiting for routeset congestion status update.
|
| cItpSpLinkMtp3T17 |
.1.3.6.1.4.1.9.9.232.1.4.1.1.34 |
|
Delay to avoid oscillation of initial alignment
failure and link restart.
|
| cItpSpLinkMtp3T18 |
.1.3.6.1.4.1.9.9.232.1.4.1.1.35 |
|
This timers servers different function based on the
variant.
ANSI: Repeat TFR once by response method
ITU: MTP restart link supervision
|
| cItpSpLinkMtp3T19 |
.1.3.6.1.4.1.9.9.232.1.4.1.1.36 |
|
This timers servers different function based on the
variant.
ANSI: failed craft timer referral timer
ITU: supervision timer during MTP restart
|
| cItpSpLinkMtp3T20 |
.1.3.6.1.4.1.9.9.232.1.4.1.1.37 |
|
This timers servers different function based on the
variant.
ANSI: waiting to repeat local inhibit test
ITU: MTP restart timer at the Signalling point
|
| cItpSpLinkMtp3T21 |
.1.3.6.1.4.1.9.9.232.1.4.1.1.38 |
|
This timers servers different function based on the
variant.
ANSI: waiting to repeat remote inhibit test)
ITU: MTP restart timer at adjacent Signalling point
|
| cItpSpLinkMtp3T22 |
.1.3.6.1.4.1.9.9.232.1.4.1.1.39 |
|
This timers servers different function based on the
variant.
ANSI: restarting SP waiting for Signalling links avail
ITU: local inhibit test timer
|
| cItpSpLinkMtp3T23 |
.1.3.6.1.4.1.9.9.232.1.4.1.1.40 |
|
This timers servers different function based on the
variant.
ANSI: restarting SP waiting to receive all TRA msgs
ITU: remote inhibit test timer
|
| cItpSpLinkMtp3T24 |
.1.3.6.1.4.1.9.9.232.1.4.1.1.41 |
|
This timers servers different function based on the
variant.
ANSI: restarting SP waiting to broadcast all TRA msgs
ITU: stabilizing timer after local processor outage
|
| cItpSpLinkMtp3T25 |
.1.3.6.1.4.1.9.9.232.1.4.1.1.42 |
|
Timer at Signalling Point (SP) adjacent to restarting
SP, waiting for traffic restart allowed message.
|
| cItpSpLinkMtp3T26 |
.1.3.6.1.4.1.9.9.232.1.4.1.1.43 |
|
Timer at restarting SP waiting to repeat traffic
restart waiting message.
|
| cItpSpLinkMtp3T27 |
.1.3.6.1.4.1.9.9.232.1.4.1.1.44 |
|
Minimum duration of unavailability for full restart.
|
| cItpSpLinkMtp3T28 |
.1.3.6.1.4.1.9.9.232.1.4.1.1.45 |
|
Timer at SP adjacent to restarting SP waiting for
traffic restart waiting message.
|
| cItpSpLinkMtp3T29 |
.1.3.6.1.4.1.9.9.232.1.4.1.1.46 |
|
Timer started when TRA sent in response to unexpected
TRA or TRW.
|
| cItpSpLinkMtp3T30 |
.1.3.6.1.4.1.9.9.232.1.4.1.1.47 |
|
Timer to limit sending of TFPs and TFRs in response
to unexpected TRA or TRW.
|
| cItpSpLinkMtp3T31 |
.1.3.6.1.4.1.9.9.232.1.4.1.1.48 |
|
False link congestion detection timer.
|
| cItpSpLinkMtp3T32 |
.1.3.6.1.4.1.9.9.232.1.4.1.1.49 |
|
Link oscillation timer - Procedure A.
|
| cItpSpLinkMtp3T33 |
.1.3.6.1.4.1.9.9.232.1.4.1.1.50 |
|
Probation timer for link oscillation - Procedure B.
|
| cItpSpLinkMtp3T34 |
.1.3.6.1.4.1.9.9.232.1.4.1.1.51 |
|
Suspension timer for link oscillation - Procedure B.
|
| cItpSpLinkTimerLinkTest |
.1.3.6.1.4.1.9.9.232.1.4.1.1.52 |
|
Signalling Link test acknowledgement timer.
|
| cItpSpLinkTimerLinkMessage |
.1.3.6.1.4.1.9.9.232.1.4.1.1.53 |
|
Interval timer for sending test messages.
|
| cItpSpLinkTimerLinkActRetry |
.1.3.6.1.4.1.9.9.232.1.4.1.1.54 |
|
Link activation retry timer.
|
| cItpSpLinkXmitQueueDepth |
.1.3.6.1.4.1.9.9.232.1.4.1.1.55 |
|
Number of packets waiting to be sent over this link.
|
| cItpSpLinkXmitQueueDepthHigh |
.1.3.6.1.4.1.9.9.232.1.4.1.1.56 |
|
This is the maximum number of packets waiting
to be sent over this link since the last time this
value was reset as indicated by
cItpSpLinkXmitQueueDepthHighReset.
Resetting this object is achieved by setting this
object to 0. Attempting to set this object to any
other value will result in a wrongValue error.
|
| cItpSpLinkXmitQueueDepthHighRT |
.1.3.6.1.4.1.9.9.232.1.4.1.1.57 |
|
This indicates when cItpSpLinkXmitQueueDepthHigh
was set to 0.
|
| cItpSpLinkCongestionState |
.1.3.6.1.4.1.9.9.232.1.4.1.1.58 |
|
The Signalling link congestion status of this link. 0
is the least congestion level, 3 is the highest
congestion level.
|
| cItpSpLinkCongestionAbate1 |
.1.3.6.1.4.1.9.9.232.1.4.1.1.59 |
|
Threshold used to abate congestion level 1.
|
| cItpSpLinkCongestionAbate2 |
.1.3.6.1.4.1.9.9.232.1.4.1.1.60 |
|
Threshold used to abate congestion level 2.
|
| cItpSpLinkCongestionAbate3 |
.1.3.6.1.4.1.9.9.232.1.4.1.1.61 |
|
Threshold used to abate congestion level 3.
|
| cItpSpLinkCongestionOnset1 |
.1.3.6.1.4.1.9.9.232.1.4.1.1.62 |
|
Threshold used to mark onset of congestion level 1.
|
| cItpSpLinkCongestionOnset2 |
.1.3.6.1.4.1.9.9.232.1.4.1.1.63 |
|
Threshold used to mark onset of congestion level 2.
|
| cItpSpLinkCongestionOnset3 |
.1.3.6.1.4.1.9.9.232.1.4.1.1.64 |
|
Threshold used to mark onset of congestion level 3.
|
| cItpSpLinkSigLinkTest |
.1.3.6.1.4.1.9.9.232.1.4.1.1.65 |
|
Indicated if Signalling link test is enabled on this
link.
true : Signalling link test is enabled.
false : Signalling link test not enabled.
|
| cItpSpLinkQ752T1E1 |
.1.3.6.1.4.1.9.9.232.1.4.1.1.66 |
|
Duration of link in the In-Service state Q752/1.1.
|
| cItpSpLinkQ752T1E2 |
.1.3.6.1.4.1.9.9.232.1.4.1.1.67 |
|
Count of Signalling Link failures - All reasons Q752/1.2.
|
| cItpSpLinkQ752T1E3 |
.1.3.6.1.4.1.9.9.232.1.4.1.1.68 |
|
Count of Signalling Link failures - Abnormal FIBR/BSNR
Q752/1.3.
|
| cItpSpLinkQ752T1E4 |
.1.3.6.1.4.1.9.9.232.1.4.1.1.69 |
|
Count of Signalling Link failures - Excessive delay of
acknowledgement Q752/1.4.
|
| cItpSpLinkQ752T1E5 |
.1.3.6.1.4.1.9.9.232.1.4.1.1.70 |
|
Count of Signalling Link failures - Excessive error rate
Q752/1.5.
|
| cItpSpLinkQ752T1E6 |
.1.3.6.1.4.1.9.9.232.1.4.1.1.71 |
|
Count of Signalling Link failures - Excessive duration
of congestion Q752/1.6.
|
| cItpSpLinkQ752T1E7 |
.1.3.6.1.4.1.9.9.232.1.4.1.1.72 |
|
Count of alignment or proving errors Q752/1.7.
|
| cItpSpLinkQ752T1E8 |
.1.3.6.1.4.1.9.9.232.1.4.1.1.73 |
|
Count of signal units received in error Q752/1.8.
|
| cItpSpLinkQ752T1E9 |
.1.3.6.1.4.1.9.9.232.1.4.1.1.74 |
|
Count of negative acknowledgements received Q752/1.9.
|
| cItpSpLinkQ752T1E10 |
.1.3.6.1.4.1.9.9.232.1.4.1.1.75 |
|
Count of 'local automatic changeover' events
Q752/1.10.
|
| cItpSpLinkQ752T1E11 |
.1.3.6.1.4.1.9.9.232.1.4.1.1.76 |
|
Count of 'local automatic changeback' events Q752/1.11.
|
| cItpSpLinkQ752T2E1 |
.1.3.6.1.4.1.9.9.232.1.4.1.1.77 |
|
Duration of Signalling Link unavailable(for any reason)
Q752/2.1.
|
| cItpSpLinkQ752T2E5 |
.1.3.6.1.4.1.9.9.232.1.4.1.1.78 |
|
Duration of Signalling Link unavailable due to local
management actions Q752/2.5.
|
| cItpSpLinkQ752T2E6 |
.1.3.6.1.4.1.9.9.232.1.4.1.1.79 |
|
Duration of Signalling Link unavailable due to remote
management actions Q752/2.6.
|
| cItpSpLinkQ752T2E7 |
.1.3.6.1.4.1.9.9.232.1.4.1.1.80 |
|
Duration of Signalling Link unavailable due to link
failure Q752/2.7.
|
| cItpSpLinkQ752T2E9 |
.1.3.6.1.4.1.9.9.232.1.4.1.1.81 |
|
Duration of Signalling Link unavailable due to remote
processor outage Q752/2.9.
|
| cItpSpLinkQ752T2E10 |
.1.3.6.1.4.1.9.9.232.1.4.1.1.82 |
|
Count of 'remote processor outage' events Q752/2.10 and
Q752/2.11. The standard only requires that events are
issued. The entries have been combined into a single
entry to track all occurrences of these event types.
|
| cItpSpLinkQ752T2E15 |
.1.3.6.1.4.1.9.9.232.1.4.1.1.83 |
|
Duration of local busy Q752/2.15.
|
| cItpSpLinkQ752T2E16 |
.1.3.6.1.4.1.9.9.232.1.4.1.1.84 |
|
Count of local inhibition Q752/2.16 and Q752/2.17.
The standard only requires that events are issued.
The entries have been combined into a single
entry to track all occurrences of these event types.
|
| cItpSpLinkQ752T2E18 |
.1.3.6.1.4.1.9.9.232.1.4.1.1.85 |
|
Count of remote inhibition Q752/2.18 and Q752/2.19.
The standard only requires that events are issued.
The entries have been combined into a single
entry to track all occurrences of these event types.
|
| cItpSpLinkMtp3PacketsRetrans |
.1.3.6.1.4.1.9.9.232.1.4.1.1.86 |
|
The number of MTP3 packets retransmitted on this link.
This measurement is specified in Q752/3.2
|
| cItpSpLinkMtp3BytesRetrans |
.1.3.6.1.4.1.9.9.232.1.4.1.1.87 |
|
The number of MTP3 bytes retransmitted on this link.
This measurement is specified in Q752/3.2
|
| cItpSpLinkQ752T3E6 |
.1.3.6.1.4.1.9.9.232.1.4.1.1.88 |
|
The number times this Signalling link was marked
congested. This measurement is specified in Q752/3.6
|
| cItpSpLinkQ752T3E7 |
.1.3.6.1.4.1.9.9.232.1.4.1.1.89 |
|
Cumulative duration of Signalling link congestion
Q752/3.7.
|
| cItpSpLinkQ752T3E10L1 |
.1.3.6.1.4.1.9.9.232.1.4.1.1.90 |
|
The number of packets(MSUs) discarded due to Signalling
link level 1 congestion Q752/3.10
|
| cItpSpLinkQ752T3E10L2 |
.1.3.6.1.4.1.9.9.232.1.4.1.1.91 |
|
The number of packets(MSUs) discard due to Signalling
link level 2 congestion Q752/3.10
|
| cItpSpLinkQ752T3E10L3 |
.1.3.6.1.4.1.9.9.232.1.4.1.1.92 |
|
The number of packets(MSUs) discard due to Signalling
link level 3 congestion Q752/3.10
|
| cItpSpLinkQ752T3E11L1 |
.1.3.6.1.4.1.9.9.232.1.4.1.1.93 |
|
The number times this Signalling link entered congestion
level 1 and packets were discarded. This measurement is
specified in Q752/3.11
|
| cItpSpLinkQ752T3E11L2 |
.1.3.6.1.4.1.9.9.232.1.4.1.1.94 |
|
The number times this Signalling link entered congestion
level 2 and packets were discarded. This measurement is
specified in Q752/3.11
|
| cItpSpLinkQ752T3E11L3 |
.1.3.6.1.4.1.9.9.232.1.4.1.1.95 |
|
The number times this Signalling link entered congestion
level 3 and packets were discarded. This measurement is
specified in Q752/3.11
|
| cItpSpLinkIPType1 |
.1.3.6.1.4.1.9.9.232.1.4.1.1.96 |
|
When cItpSpLinkType is set to sctpIp then this object
contains the type of the first of four possible local
IP addresses used to create the association supporting
this link. When cItpSpLinkType is not set to sctpIp
then no significance is to be placed on this value.
|
| cItpSpLinkIPType2 |
.1.3.6.1.4.1.9.9.232.1.4.1.1.97 |
|
When cItpSpLinkType is set to sctpIp then this object
contains the type of the second of four possible local
IP addresses used to create the association supporting
this link. When cItpSpLinkType is not set to sctpIp
then no significance is to be placed on this value.
|
| cItpSpLinkIPType3 |
.1.3.6.1.4.1.9.9.232.1.4.1.1.98 |
|
When cItpSpLinkType is set to sctpIp then this object
contains the type of the third of four possible local
IP addresses used to create the association supporting
this link. When cItpSpLinkType is not set to sctpIp
then no significance is to be placed on this value.
|
| cItpSpLinkIPType4 |
.1.3.6.1.4.1.9.9.232.1.4.1.1.99 |
|
When cItpSpLinkType is set to sctpIp then this object
contains the type of the fourth of four possible local
IP addresses used to create the association supporting
this link. When cItpSpLinkType is not set to sctpIp
then no significance is to be placed on this value.
|
| cItpSpLinkIPAddr1 |
.1.3.6.1.4.1.9.9.232.1.4.1.1.100 |
|
When cItpSpLinkType is set to sctpIp then this object
contains the first of four possible local IP addresses
used to create the association supporting this link.
When cItpSpLinkType is not set to sctpIp then no
significance is to be placed on this value.
|
| cItpSpLinkIPAddr2 |
.1.3.6.1.4.1.9.9.232.1.4.1.1.101 |
|
When cItpSpLinkType is set to sctpIp then this object
contains the second of four possible local IP addresses
used to create the association supporting this link.
When cItpSpLinkType is not set to sctpIp then no
significance is to be placed on this value.
|
| cItpSpLinkIPAddr3 |
.1.3.6.1.4.1.9.9.232.1.4.1.1.102 |
|
When cItpSpLinkType is set to sctpIp then this object
contains the third of four possible local IP addresses
used to create the association supporting this link.
When cItpSpLinkType is not set to sctpIp then no
significance is to be placed on this value.
|
| cItpSpLinkIPAddr4 |
.1.3.6.1.4.1.9.9.232.1.4.1.1.103 |
|
When cItpSpLinkType is set to sctpIp then this object
contains the fourth of four possible local IP addresses
used to create the association supporting this link.
When cItpSpLinkType is not set to sctpIp then no
significance is to be placed on this value.
|
| cItpSpLinkLocalPort |
.1.3.6.1.4.1.9.9.232.1.4.1.1.104 |
|
When cItpSpLinkType is set to sctpIp then this object
contains the local port number used to create the
association supporting this link.
When cItpSpLinkType is not set to sctpIp then no
significance is to be placed on this value.
|
| cItpSpLinkRemotePort |
.1.3.6.1.4.1.9.9.232.1.4.1.1.105 |
|
When cItpSpLinkType is set to sctpIp then this object
contains the remote port number used to create the
association supporting this link.
When cItpSpLinkType is not set to sctpIp then no
significance is to be placed on this value.
|
| cItpSpLinkQosClass |
.1.3.6.1.4.1.9.9.232.1.4.1.1.106 |
|
When cItpSpLinkType is set to sctpIp then this object
contains the quality of service class to be assigned
to packets sent on this association.
When cItpSpLinkType is not set to sctpIp then no
significance is to be placed on this value.
|
| cItpSpLinkRowStatus |
.1.3.6.1.4.1.9.9.232.1.4.1.1.107 |
|
The object is used by a management station to
create or delete the row entry in cItpSpLinkTable
following the RowStatus textual convention.
|
| cItpSpLinkStateReason |
.1.3.6.1.4.1.9.9.232.1.4.1.1.108 |
|
This object provides additional information
on the state of a link as follows.
'localInhibit' : Link has been inhibited by a local
management operation.
'remoteInhibit' : LInk has been inhibited by a remote
management operation.
'blocked' : Link is blocked because of a remote
processor outage.
|
| cItpSpLinkDisplayName |
.1.3.6.1.4.1.9.9.232.1.4.1.1.109 |
|
A short identifier for each link linkset.
This value can be set by system administrator
or defaults to the linkset name and SLC
formatted as an ASCII string.
|
| cItpSpLinkDroppedPkts |
.1.3.6.1.4.1.9.9.232.1.4.1.1.110 |
|
The number of packets that were dropped by this link.
|
| cItpSpLinkTransmittedLssu |
.1.3.6.1.4.1.9.9.232.1.4.1.1.111 |
|
The number of Link Status Signal Units sent on this
link.
|
| cItpSpLinkReceivedLssu |
.1.3.6.1.4.1.9.9.232.1.4.1.1.112 |
|
The number of Link Status Signal Units received on this
link.
|
| cItpSpLinkProtocolDetails |
.1.3.6.1.4.1.9.9.232.1.4.1.1.113 |
|
This object provide details on the protocol states
for this link as follows.
Changeback control(TCBC)
'tcbcBuffering': Changeback control is buffering data
on this link.
Changeover control(TCOC)
'tcocBuffering': Changeover control is buffering data
on this link
Link availability control(TLAC)
'tlacAdjacentSpRestarting': Adjacent Signalling point
is restarting.
'tlacEmergencyCoInProgress': Emergency changeover is in
progress on this link.
'tlacChangebackInProgress': Changeback is in progress
on this link.
'tlacChangeoverInProgress': Changeover is in progress
on this link.
'tlacChangeoverFailed': The last changeover operation
failed on this link.
'tlacInhibitRetry': Inhibit command will be retried.
'tlacManagementRequest': Management request in progress
for this link.
'tlacSpRestarting': Signalling point is in the process
of a restart.
Signalling routing control(TSRC)
'tsrcChangeOverComplete': Changeove request is complete.
'tsrcAdjacentSpRestart': Adjacent Signalling Point is
restarting.
|
| cItpSpLinkLsacState |
.1.3.6.1.4.1.9.9.232.1.4.1.1.114 |
|
Signalling link activity control state:
'undefined(1)' - link is an undefined state
'inactive(2)' - A Signalling link that is not in
operation.
'active(3)' - A Signalling link that is in
operation.
'activatingRestoring(4)' - A Signalling that is not operational
and is being activated or restored.
'failed(5)' - A Signalling link which is available
(not blocked) is marked by level 3 as
failed when a changeover order is
received.
'actT17wait(6)' - Link activation has failed. Link is
placed into this state to wait for timer
T17 to expire in order to avoid the
oscillation of initial alignment failure
and link restart.
'actAnsiWaitDeloaded(7) - Waiting for change back
acknowledgement (second attempt).
'actItuWaitStmReady(8)' Wait for Signalling Traffic
Management ready event.
|
| cItpSpLinkTsrcState |
.1.3.6.1.4.1.9.9.232.1.4.1.1.115 |
|
Signalling traffic management routing control state:
'undefined(1)' - link is an undefined state
'idle(2)' - traffic mangement is idle
'wait5(3)' - traffic management is active and
in the sending status phase
|
| cItpSpLinkTcocState |
.1.3.6.1.4.1.9.9.232.1.4.1.1.116 |
|
Changeover control State:
'undefined(1)' - Link is an undefined state.
'idle(2)' - Link is available and idle.
'wait2(3)' - Wait for MTP2 to initialize link.
'waitForAck(4)' - Waiting for changeover
acknowledgement.
'retrieving(5)' - Packets are being retrieved from
link.
'wait5(6)' - Wait state when transitioning from
idle state.
'wait7(7)' - Delay to avoid message mis-sequencing
on changeover
'wait8(8)' - Wait state prior to processing
changeover order or emergency
changeover order events.
|
| cItpSpLinkTcocLocalBSNT |
.1.3.6.1.4.1.9.9.232.1.4.1.1.117 |
|
The local backward sequence number to be transmitted.
|
| cItpSpLinkTcocRemoteBSNT |
.1.3.6.1.4.1.9.9.232.1.4.1.1.118 |
|
The remote backward sequence number to be transmitted.
|
| cItpSpLinkTcbcState |
.1.3.6.1.4.1.9.9.232.1.4.1.1.119 |
|
Changeback control State:
'undefined(1)' - link is an undefined state.
'idle(2)' - Link is available and idle.
'firstAttempt(3)' - First attempt at changeback.
'secondAttempt(4)' - Second attempt at changeback
'timeControlledDiversion(5)' - Changeback using
time controlled Diversion.
|
| cItpSpLinkReceivedSIB |
.1.3.6.1.4.1.9.9.232.1.4.1.1.120 |
|
The number of status indicator 'busy' link status signal
units received on this link. The SIB indicates that
level two is congested at the transmitting Signalling
point.
|
| cItpSpLinkTransmittedSIB |
.1.3.6.1.4.1.9.9.232.1.4.1.1.121 |
|
The number of status indicator 'busy' link status signal
units transmitted on this link. The SIB indicates that
level two is congested at the transmitting Signalling
point.
|
| cItpSpLinkMtp2ExpiredT01 |
.1.3.6.1.4.1.9.9.232.1.4.1.1.122 |
|
The number of times the alignment ready timer has
expired on this link.
|
| cItpSpLinkMtp2ExpiredT02 |
.1.3.6.1.4.1.9.9.232.1.4.1.1.123 |
|
The number of times the not alignment ready timer has
expired on this link.
|
| cItpSpLinkMtp2ExpiredT03 |
.1.3.6.1.4.1.9.9.232.1.4.1.1.124 |
|
The number of times the aligned timer has
expired on this link.
|
| cItpSpLinkMtp2ExpiredT04 |
.1.3.6.1.4.1.9.9.232.1.4.1.1.125 |
|
The number of times the proving period timer
has expired on this link.
|
| cItpSpLinkMtp2ExpiredT05 |
.1.3.6.1.4.1.9.9.232.1.4.1.1.126 |
|
The number of times the sending status indicator
busy timer has expired on this link.
|
| cItpSpLinkMtp2ExpiredT06 |
.1.3.6.1.4.1.9.9.232.1.4.1.1.127 |
|
The number of times the remote congestion
timer has expired on this link.
|
| cItpSpLinkMtp2ExpiredT07 |
.1.3.6.1.4.1.9.9.232.1.4.1.1.128 |
|
The number of times the excessive delay of
acknowledgement timer has expired on this link.
|
| cItpSpLinkOMAERMCount |
.1.3.6.1.4.1.9.9.232.1.4.1.1.129 |
|
The number of times the Alignment Error Rate Monitor
procedure was started on this link.
|
| cItpSpLinkOMAERMFailCount |
.1.3.6.1.4.1.9.9.232.1.4.1.1.130 |
|
The number of times the Alignment Error Rate Monitor
procedure failed on this link.
|
| cItpSpLinkOMSURMCount |
.1.3.6.1.4.1.9.9.232.1.4.1.1.131 |
|
The number of times the Signal Unit Error Rate Monitor
procedure was started on this link.
|
| cItpSpLinkOMSURMFailCount |
.1.3.6.1.4.1.9.9.232.1.4.1.1.132 |
|
The number of times the Signal Unit Error Rate Monitor
procedure failed on this link.
|
| cItpSpLinkPlanCapacityRcvd |
.1.3.6.1.4.1.9.9.232.1.4.1.1.133 |
|
An estimate of the number of bits per second that is
expected to be received from this link. This
object will be used in combination with
cItpSpUtilSampleInterval, cItpSpUtilThreshold,
cItpSpUtilThreshold and cItpSpLinkUtilThresholdRcvd
to generate the cItpSpLinkRcvdUtilChange notification.
|
| cItpSpLinkUtilThresholdRcvd |
.1.3.6.1.4.1.9.9.232.1.4.1.1.134 |
|
This object specifies the threshold used to
to generate the cItpSpLinkRcvdUtilChange notification.
The value of zero indicates the threshold has not been
defined at the link level and the value from the
cItpSpUtilThreshold object will be used to generate
the cItpSpLinkRcvdUtilChange notification.
|
| cItpSpLinkUtilizationRcvd |
.1.3.6.1.4.1.9.9.232.1.4.1.1.135 |
|
An estimate of the utilization of this link for traffic
received on this link in the prior time period defined
by the cItpSpUtilSampleInterval object.
|
| cItpSpLinkUtilStateRcvd |
.1.3.6.1.4.1.9.9.232.1.4.1.1.136 |
|
Link Utilization State for in bound traffic.
|
| cItpSpLinkL2BytesRcvd |
.1.3.6.1.4.1.9.9.232.1.4.1.1.137 |
|
A count of the bytes received on the link including the
additional bytes required by underlying protocols.
This provides a transport independent mechanism
for collection information on link utilization.
|
| cItpSpLinkPlanCapacitySent |
.1.3.6.1.4.1.9.9.232.1.4.1.1.138 |
|
An estimate of the number of bits per second that is
expected to be sent on this link. This object will
be used in combination with cItpSpUtilSampleInterval,
cItpSpUtilThreshold and cItpSpLinkUtilThresholdRcvd to
generate the cItpSpLinkSentUtilChange notification.
|
| cItpSpLinkUtilThresholdSent |
.1.3.6.1.4.1.9.9.232.1.4.1.1.139 |
|
This object specifies the threshold used to generate the
cItpSpLinkRcvdUtilChange notification. The value of zero
indicates the threshold has not been defined at the link
level and the value from the cItpSpUtilThreshold object
will be used to generate the cItpSpLinkRcvdUtilChange
notification.
|
| cItpSpLinkUtilizationSent |
.1.3.6.1.4.1.9.9.232.1.4.1.1.140 |
|
An estimate of the utilization of this link for traffic
sent on this link in the prior time period defined
by the cItpSpUtilSampleInterval object.
|
| cItpSpLinkUtilStateSent |
.1.3.6.1.4.1.9.9.232.1.4.1.1.141 |
|
Link Utilization State for out bound traffic.
|
| cItpSpLinkL2BytesSent |
.1.3.6.1.4.1.9.9.232.1.4.1.1.142 |
|
A count of the bytes sent on the link including the
additional bytes required by underlying protocols.
This provides a transport independent mechanism
for collection information on link utilization.
|
