cisco-psa-microcode-mib.mib object
Introduction
Most network devices and programs ship with so-called MIB files to describe the parameters and meanings (i.e.: friendly names) which are available for monitoring via SNMP.
ActiveXperts Network Monitor 2025 can import vendor-specific MIB files, so it can be used to monitor specific OID's (Object Identifiers).
This way, you can monitor your devices, computers, etc. by selecting your relevant OID's by name.
ActiveXperts Network Monitor 2025 can import MIB file cisco-psa-microcode-mib and use it to monitor vendor specific OID's.
cisco-psa-microcode-mib file content
Object view of cisco-psa-microcode-mib:
| Scalar Object |
| cpmcModulePsaEntry |
.1.3.6.1.4.1.9.9.259.1.1.1.1 |
|
Entries providing PSA microcode bundle information
of those entities of type PhysicalClass module(9)
and contain PSA.
|
| cpmcBundleEntry |
.1.3.6.1.4.1.9.9.259.1.2.1.1 |
|
Details the features of a microcode bundle.
|
| cpmcNotifEnables |
.1.3.6.1.4.1.9.9.259.1.3.1 |
|
This variable indicates whether the system
produces the ciscoPsaMicrocodeReload notification.
A false value will prevent PSA microcode reload
notifications from being generated by the system.
|
| Tabular Object |
| cpmcModulePsaCurrBundleId |
.1.3.6.1.4.1.9.9.259.1.1.1.1.1 |
|
The identity of the microcode bundle currently
loaded on the PSA of the module identified by
entPhysicalIndex.
|
| cpmcModulePsaPrevBundleId |
.1.3.6.1.4.1.9.9.259.1.1.1.1.2 |
|
The identity of the microcode bundle previously
loaded on the PSA of the module identified by
entPhysicalIndex. Till the first microcode reload
is performed on the module, the value will be
'none(2)'.
|
| cpmcModulePsaFeaturesEnabled |
.1.3.6.1.4.1.9.9.259.1.1.1.1.3 |
|
The list of features newly enabled due to the
loading of the microcode bundle identified by
cpmcModulePsaCurrBundleId.
|
| cpmcModulePsaFeaturesDisabled |
.1.3.6.1.4.1.9.9.259.1.1.1.1.4 |
|
The list of features disabled because of the
unloading of microcode bundle identified by
cpmcModulePsaPrevBundleId and loading of the
microcode bundle identified by
cpmcModulePsaCurrBundleId.
|
| cpmcBundleId |
.1.3.6.1.4.1.9.9.259.1.2.1.1.1 |
|
The identity of the PSA microcode bundle. This
object value can't be unknown(1) or none(2).
|
| cpmcBundleFeatures |
.1.3.6.1.4.1.9.9.259.1.2.1.1.2 |
|
The list of features supported by microcode bundle
identified by cpmcBundleId.
|
| Table |
| cpmcModulePsaTable |
.1.3.6.1.4.1.9.9.259.1.1.1 |
|
A table providing the microcode bundle information
of those modules which contains PSA (Ex: engine 2
line cards in GSR).
|
| cpmcBundleTable |
.1.3.6.1.4.1.9.9.259.1.2.1 |
|
A table of PSA microcode bundle features.
|
| Trap |
| ciscoPsaMicrocodeReload |
.1.3.6.1.4.1.9.9.259.0.1 |
|
A ciscoPsaMicrocodeReload notification is generated
when a PSA microcode reload occurs..
|
| Object Identifier |
| ciscoPsaMicrocodeMIB |
.1.3.6.1.4.1.9.9.259 |
|
Cisco PSA Microcode MIB - Overview
The PSA is the Packet Switching ASIC used
in module like engine 2(E2) line cards in GSR
for IP and MPLS packets forwarding. The PSA
performs IP and MPLS packet forwarding at 4 Mpps.
The list of features supported by the PSA
includes (but is not limited to):
- Input and Output ACLs
- Frame Relay Switching
- PIRC
- MPLS VPN
- BGP policy accounting
- IP packet coloring
- Sampled Net flow
- ATM over MPLS.
- Source MAC Accounting.
- Unicast RPF
Note that all the features are not
supported simultaneously on a module.
Each microcode bundle/set can support
one or a limited number of the features
listed above. Each feature has a priority.
When a feature (ACL, Sampled NetFlow) is
enabled through the CLI, the higher
priority feature will take precedence
over the lower priority feature. The
microcode for the lower priority is
removed and cleaned up. The higher
priority microcode will be loaded.
Later, if the higher priority feature
is removed, the lower priority microcode
will be loaded again.
This MIB contains information about the microcode
bundles on modules like E2 Line Cards(LC) in GSR.
Since microcode reload is a service interrupting
event, this MIB also defines a notification to
inform management stations that such an event has
taken place.
|
| ciscoPsaMicrocodeMIBNotifs |
.1.3.6.1.4.1.9.9.259.0 |
| ciscoPsaMicrocodeMIBObjects |
.1.3.6.1.4.1.9.9.259.1 |
| ciscoPsaMicrocodeMIBConformance |
.1.3.6.1.4.1.9.9.259.2 |
| cpmcModulePsa |
.1.3.6.1.4.1.9.9.259.1.1 |
| cpmcBundle |
.1.3.6.1.4.1.9.9.259.1.2 |
| cpmcNotif |
.1.3.6.1.4.1.9.9.259.1.3 |
| ciscoPsaMicrocodeMIBCompliances |
.1.3.6.1.4.1.9.9.259.2.1 |
| ciscoPsaMicrocodeMIBGroups |
.1.3.6.1.4.1.9.9.259.2.2 |
| Group |
| ciscoPsaMicrocodeParamsGroup |
.1.3.6.1.4.1.9.9.259.2.2.1 |
|
A collection of objects providing PSA microcode
monitoring.
|
| ciscoPsaMicrocodeNotifGroup |
.1.3.6.1.4.1.9.9.259.2.2.2 |
|
A collection of notifications generated by
the devices supporting this MIB.
|
