cisco-snmp-vacm-ext-mib.mib object
Introduction
Most network devices and programs ship with so-called MIB files to describe the parameters and meanings (i.e.: friendly names) which are available for monitoring via SNMP.
ActiveXperts Network Monitor 2025 can import vendor-specific MIB files, so it can be used to monitor specific OID's (Object Identifiers).
This way, you can monitor your devices, computers, etc. by selecting your relevant OID's by name.
ActiveXperts Network Monitor 2025 can import MIB file cisco-snmp-vacm-ext-mib and use it to monitor vendor specific OID's.
cisco-snmp-vacm-ext-mib file content
Object view of cisco-snmp-vacm-ext-mib:
| Scalar Object |
| cvacmSecurityToGroupEntry |
.1.3.6.1.4.1.9.9.409.1.1.1 |
|
An entry (conceptual row) in the
'cvacmSecurityToGroupTable'. Each row represents one
groupName mapping for the combination of 'securityModel'
and 'securityName' in the system.
|
| Tabular Object |
| cvacmSecurityGrpName |
.1.3.6.1.4.1.9.9.409.1.1.1.1 |
|
The name of the group for the mapping represented by
this row. This is in addition to the 'vacmGroupName'
mapped in the 'vacmSecurityToGroupTable'. For example
a user principal represented by 'securityName' maps
to a group represented by 'cvacmSecurityGrpName' under
a security model represented by 'securityModel'.
This groupName is used as index into the
'vacmAccessTable' to select an access control policy.
However, a value in this table does not imply that an
instance with the value exists in table 'vacmAccesTable'.
|
| cvacmSecurityGrpStorageType |
.1.3.6.1.4.1.9.9.409.1.1.1.2 |
|
The storage type for this conceptual row.
Conceptual rows having the value 'permanent' need not
allow write-access to any columnar objects in the row.
|
| cvacmSecurityGrpStatus |
.1.3.6.1.4.1.9.9.409.1.1.1.3 |
|
The status of this conceptual row. The value of
this object has no effect on whether other objects
in this conceptual row can be modified.
|
| Table |
| cvacmSecurityToGroupTable |
.1.3.6.1.4.1.9.9.409.1.1 |
|
An Extension table to the 'vacmSecurityToGroupTable'
defined in 'SNMP-VIEW-BASED-ACM-MIB.
This table provides a mechanism to map a combination
of 'securityModel' and 'securityName' into one or more
groups in addition to the 'vacmGroupName' mapped in
the 'vacmSecurityToGroupTable'. These groups provide
additional access control policies for a principal.
The agent must allow the same group mapping entry to be
present in both the 'cvacmSecurityToGroupTable' and the
'vacmSecurityToGroupTable'.
A row in this table can not exist without a corresponding
row for the same combination of 'securityModel' and
'securityName in the 'vacmSecurityToGroupTable'.
While creating a row in this table, if there is no
corresponding row for the same combination of
'securityModel' and 'securityName in the
'vacmSecurityToGroupTable', the same mapping entry in
is created in the 'vacmSecurityToGroupTable' by the
agent using the values of instance variables of the entry
in this table.
The deletion of a row in the 'vacmSecurityToGroupTable'
also causes the deletion of all the group mapping
entries for the same combination of 'vacmSecurityModel'
and 'vacmSecurityName' in the 'cvacmSecurityToGroupTable'.
The deletion of a row in this table does not affect
'vacmSecurityToGroupTable'entries.
|
| Object Identifier |
| ciscoSnmpVacmExtMIB |
.1.3.6.1.4.1.9.9.409 |
|
The management information definitions to extend
the View-based Access Control Model (RFC3415) for
SNMP.
This MIB extends the 'SNMP-VIEW-BASED-ACM-MIB' to
allow each combination of a 'securityModel' and a
'securityName' to be mapped into additional
groupNames. The groups identified by these mappings
are in addition to those identified by
'vacmGroupName' of the 'vacmSecurityToGroupTable'.
|
| ciscoSnmpVacmExtMIBObjects |
.1.3.6.1.4.1.9.9.409.1 |
| ciscoSnmpVacmExtMIBConformance |
.1.3.6.1.4.1.9.9.409.2 |
| ciscoSnmpVacmExtMIBCompliances |
.1.3.6.1.4.1.9.9.409.2.1 |
| ciscoSnmpVacmExtMIBGroups |
.1.3.6.1.4.1.9.9.409.2.2 |
| Group |
| ciscoSnmpVacmExtGroup |
.1.3.6.1.4.1.9.9.409.2.2.1 |
|
A collection of objects providing for remote
configuration of an SNMP engine which extends
the SNMP View-based Access Control Model.
|
