cisco-switch-usage-mib.mib object
Introduction
Most network devices and programs ship with so-called MIB files to describe the parameters and meanings (i.e.: friendly names) which are available for monitoring via SNMP.
ActiveXperts Network Monitor 2025 can import vendor-specific MIB files, so it can be used to monitor specific OID's (Object Identifiers).
This way, you can monitor your devices, computers, etc. by selecting your relevant OID's by name.
ActiveXperts Network Monitor 2025 can import MIB file cisco-switch-usage-mib and use it to monitor vendor specific OID's.
cisco-switch-usage-mib file content
Object view of cisco-switch-usage-mib:
| Scalar Object |
| cswitchUsageStatEntry |
.1.3.6.1.4.1.9.9.201.1.1.1.1 |
|
Entry contains information of a particular
interface in terms of how much switch resource
it has used.
An entry in this table exists for each ifEntry
with an ifType of fastEther(62) for FastEthernet
interface and gigabitEthernet (117) for Gigabit
interface.
|
| Tabular Object |
| cswitchUsageByIngrsIntfPkts |
.1.3.6.1.4.1.9.9.201.1.1.1.1.1 |
|
The number of ingress packets of a interface
which use the switch resource.
|
| cswitchUsageByIngrsIntfHCPkts |
.1.3.6.1.4.1.9.9.201.1.1.1.1.2 |
|
The number of ingress packets of a interface
which use the switch resource.
This is a 64 bit (High Capacity) version of
the cswitchUsageByIngrsIntfPkts counter for
use with SNMP v2c or v3 Managers.
|
| cswitchUsageByIngrsIntfOctets |
.1.3.6.1.4.1.9.9.201.1.1.1.1.3 |
|
The number of ingress octets of a interface
which use the switch resource.
|
| cswitchUsageByIngrsIntfHCOctets |
.1.3.6.1.4.1.9.9.201.1.1.1.1.4 |
|
The number of ingress octets of a interface
which use the switch resource.
This is a 64 bit (High Capacity) version of
the cswitchUsageByIngrsIntfOctets counter for
use with SNMP v2c or v3 Managers.
|
| Table |
| cswitchUsageStatTable |
.1.3.6.1.4.1.9.9.201.1.1.1 |
|
A list of switch resouce usage statistics
entries. The statistics will give information
on the switch usage by each interface.
|
| Object Identifier |
| ciscoSwitchUsageMIB |
.1.3.6.1.4.1.9.9.201 |
|
This MIB defines objects related to statistics
for the usage of switch fabric. The switch fabric
is used by the incoming packets from the line/network
to a interface. Such packets are called ingress packets.
Counters are maintained for number of ingress packets/
octets switched by the switch fabric for each
interface.
NOTE: These counters are not counting the total number
of incoming packets and octets for a particular
interface. Instead only the counts of packets and
octets that actually use the switch-fabric are being
accounted for by this MIB. Therefore, the counters in
this MIB are distinctly different from packet and octet
counters found in the IF-MIB.
|
| ciscoSwitchUsageMIBObjects |
.1.3.6.1.4.1.9.9.201.1 |
| ciscoSwitchUsageStats |
.1.3.6.1.4.1.9.9.201.1.1 |
| ciscoSwitchUsageMIBNotifyPrefix |
.1.3.6.1.4.1.9.9.201.2 |
| ciscoSwitchUsageMIBNotifications |
.1.3.6.1.4.1.9.9.201.2.0 |
| ciscoSwitchUsageMIBConformance |
.1.3.6.1.4.1.9.9.201.3 |
| ciscoSwitchUsageMIBCompliances |
.1.3.6.1.4.1.9.9.201.3.1 |
| ciscoSwitchUsageMIBGroups |
.1.3.6.1.4.1.9.9.201.3.2 |
| Group |
| ciscoSwitchUsageMIBGroup |
.1.3.6.1.4.1.9.9.201.3.2.1 |
|
The Object Group for switch usage statistics
|
