COMPAT-MIB.mib object view, vendor Compatible-Systems-Corp
Introduction
Most network devices and programs ship with so-called MIB files to describe the parameters and meanings (i.e.: friendly names) which are available for monitoring via SNMP.
ActiveXperts Network Monitor 2024 can import vendor-specific MIB files, so it can be used to monitor specific OID's (Object Identifiers).
This way, you can monitor your devices, computers, etc. by selecting your relevant OID's by name.
ActiveXperts Network Monitor 2024 can import MIB file COMPAT-MIB and use it to monitor vendor specific OID's.
COMPAT-MIB file content
Object view of COMPAT-MIB:
| Scalar Object |
| failedLogins |
.1.3.6.1.4.1.255.2.1.1 |
|
The number of failed logins since boot time.
|
| failedSecurID |
.1.3.6.1.4.1.255.2.1.2 |
|
The number of failed Secure ID logins since boot time.
|
| failedRadiusAuth |
.1.3.6.1.4.1.255.2.1.3 |
|
The number of failed RADIUS logins since boot time.
|
| processorUtilizationPercentage |
.1.3.6.1.4.1.255.1.1 |
|
The percentage of time the processor is spending not idle.
|
| vpnTunnelTableEntry |
.1.3.6.1.4.1.255.2.2.1.1 |
|
The tunnel active table. An entry in this table is
uniquely identified by the value of the
vpnTunnelTableIndex variable to which the entry refers.
|
| Tabular Object |
| vpnTunnelTableIndex |
.1.3.6.1.4.1.255.2.2.1.1.1 |
|
A unique value, greater than zero, for each tunnel
interface.
|
| vpnTunnelTableUserName |
.1.3.6.1.4.1.255.2.2.1.1.2 |
|
The name of the VPN user
|
| vpnTunnelTableGroupName |
.1.3.6.1.4.1.255.2.2.1.1.3 |
|
The name of the VPN group
|
| vpnTunnelTableIpAddress |
.1.3.6.1.4.1.255.2.2.1.1.4 |
|
The VPN partner's IP Address.
|
| vpnTunnelTableAssignedIpAddress |
.1.3.6.1.4.1.255.2.2.1.1.5 |
|
The Client's dynamically assigned IP Address.
|
| vpnTunnelTableIpBytesRcvd |
.1.3.6.1.4.1.255.2.2.1.1.6 |
|
The total number of inbound IP bytes
handled by this tunnel as counted by the STEP layer.
|
| vpnTunnelTableIpBytesSent |
.1.3.6.1.4.1.255.2.2.1.1.7 |
|
The total number of outbound IP bytes
handled by this tunnel as counted by the STEP layer.
|
| vpnTunnelTableIpxBytesRcvd |
.1.3.6.1.4.1.255.2.2.1.1.8 |
|
The total number of inbound IPX bytes
handled by this tunnel as counted by the STEP layer.
|
| vpnTunnelTableIpxBytesSent |
.1.3.6.1.4.1.255.2.2.1.1.9 |
|
The total number of outbound IPX bytes
handled by this tunnel as counted by the STEP layer.
|
| vpnTunnelTableAppletalkBytesRcvd |
.1.3.6.1.4.1.255.2.2.1.1.10 |
|
The total number of inbound Appletalk bytes
handled by this tunnel as counted by the STEP layer.
|
| vpnTunnelTableAppletalkBytesSent |
.1.3.6.1.4.1.255.2.2.1.1.11 |
|
The total number of outbound Appletalk bytes
handled by this tunnel as counted by the STEP layer.
|
| vpnTunnelTableUptime |
.1.3.6.1.4.1.255.2.2.1.1.12 |
|
The time since the tunnel was established.
|
| vpnTunnelTableLatency |
.1.3.6.1.4.1.255.2.2.1.1.13 |
|
SLA latency metric.
|
| vpnTunnelTableBandwidthOut |
.1.3.6.1.4.1.255.2.2.1.1.14 |
|
SLA metric for measuring outbound
data bandwidth through this tunnel.
|
| vpnTunnelTableBandwidthReturn |
.1.3.6.1.4.1.255.2.2.1.1.15 |
|
SLA metric for measuring inbound
data bandwidth through this tunnel.
|
| Table |
| vpnTunnelTable |
.1.3.6.1.4.1.255.2.2.1 |
|
This table contains information useful
when tracking vpn tunnels currently active for this NAS.
|
| Object Identifier |
| compatible |
.1.3.6.1.4.1.255 |
| compatVars |
.1.3.6.1.4.1.255.1 |
| compatVPN |
.1.3.6.1.4.1.255.2 |
| vpnLoginTable |
.1.3.6.1.4.1.255.2.1 |
| vPNTunnelTable |
.1.3.6.1.4.1.255.2.2 |
