ActiveXperts Network Monitor 2019##AdminFavorites

CTFRAMER-CONFIG-MIB.mib object view, vendor Enterasys-Networks-Inc

Introduction

Most network devices and programs ship with so-called MIB files to describe the parameters and meanings (i.e.: friendly names) which are available for monitoring via SNMP.
ActiveXperts Network Monitor 2019 can import vendor-specific MIB files, so it can be used to monitor specific OID's (Object Identifiers). This way, you can monitor your devices, computers, etc. by selecting your relevant OID's by name.

ActiveXperts Network Monitor 2019 can import MIB file CTFRAMER-CONFIG-MIB and use it to monitor vendor specific OID's.

CTFRAMER-CONFIG-MIB file content

Object view of CTFRAMER-CONFIG-MIB:

Scalar Object
ctFramerConfigEntry .1.3.6.1.4.1.52.4.3.3.9.1.1.1
An entry containing objects pertaining to the configuration of the framer on a physical port on an interface.
Tabular Object
ctFramerStatsConfig .1.3.6.1.4.1.52.4.3.3.9.1.1.1.1
Setting this object to 'on' will activate the framer MIBs as specified by either RFC-1595 or RFC-1407 depending on whether the interface uses SONET/SDH framing or DS3 framing respectively. Note: Setting this to 'on' will permit gathering of framer statistics at the expense of processing time. However, it might be a valuable debugging aid to turn on the framer MIB. Setting this object to 'off' will deactivate the respective framer MIBs, thus saving processing time. It is emphasized that collection of statistics for the framer is resource (processor, memory) intensive. This object is persistent.
ctFramerAlarmsConfig .1.3.6.1.4.1.52.4.3.3.9.1.1.1.2
This object activates/deactivates the detection and initiation of framer alarms. for SONET/SDH framed physical ports: RDI - remote defect indicator AIS - alarm indication signal for DS3 framed physical ports: yellow signal alarms This object is persistent.
ctFramerMediumConfig .1.3.6.1.4.1.52.4.3.3.9.1.1.1.3
This object controls whether a SONET or a SDH signal is used across this physical port. sonet - synchronous optical network sdh - synchronous digital heirarchy This object is persistent.
ctFramerIdleCellsConfig .1.3.6.1.4.1.52.4.3.3.9.1.1.1.4
When this object is set to idle, null cells will have the CLP bit set. When this object is set to unassigned, null cells will not have the CLP bit set. This object is persistent.
ctFramerCellPayScramConfig .1.3.6.1.4.1.52.4.3.3.9.1.1.1.5
This object activates/deactivates cell payload transmit scrambling and receive descrambling. This object is persistent.
Table
ctFramerConfigTable .1.3.6.1.4.1.52.4.3.3.9.1.1
A list of framer configuration objects for a physical port on a particular interface.
Object Identifier
ctFramerBaseConfig .1.3.6.1.4.1.52.4.3.3.9.1
ctFramerSonetConfig .1.3.6.1.4.1.52.4.3.3.9.2
ctFramerDS3Config .1.3.6.1.4.1.52.4.3.3.9.3