| ctdlswVersion |
.1.3.6.1.4.1.52.4.1.2.8.1.1.1 |
|
Indicates the current revision level of the DLSw firmware
in textual format.
|
| ctdlswAdminStatus |
.1.3.6.1.4.1.52.4.1.2.8.1.1.2 |
|
Sets the system-wide administrative state of DLSw services.
|
| ctdlswOperStatus |
.1.3.6.1.4.1.52.4.1.2.8.1.1.3 |
|
Indicates the current system-wide status of DLSw services.
|
| ctdlswUpTime |
.1.3.6.1.4.1.52.4.1.2.8.1.1.4 |
|
Indicates the time (in hundredths of a second) since the DLSw
services portion of the system was enabled.
|
| ctdlswOperVirtualRingNumber |
.1.3.6.1.4.1.52.4.1.2.8.1.1.5 |
|
Specifies the operational ring/segment number that uniquely
identifies the virtual segment to which this DLSw is connected.
This object may only be modified when ctdlswOperStatus is
disabled.
|
| ctdlswNBLocalFilterType |
.1.3.6.1.4.1.52.4.1.2.8.1.1.6 |
|
Specifies the type of filtering to be applied
to NetBIOS frames received on a local LAN segment.
If set to block(1), any frame matching any entry in
ctdlswNBLocalFilterTable will not be forwarded.
If set to pass(2), only frames matching any entry in
ctdlswNBLocalFilterTable will be forwarded.
|
| ctdlswNBRemoteFilterType |
.1.3.6.1.4.1.52.4.1.2.8.1.1.7 |
|
Specifies the type of filtering to be applied to
NetBIOS frames received from a remote DLSw partner.
If set to block(1), any frame matching any entry in
ctdlswNBRemoteFilterTable will not be forwarded.
If set to pass(2), only frames matching any entry in
ctdlswNBRemoteFilterTable will be forwarded.
|
| ctdlswMacLocalFilterType |
.1.3.6.1.4.1.52.4.1.2.8.1.1.8 |
|
Specifies the type of address filtering to be applied
to SNA MAC frames received on a local LAN segment.
If set to block(1), any frame matching any entry in
ctdlswMacLocalFilterTable will not be forwarded.
If set to pass(2), only frames matching any entry in
ctdlswMacLocalFilterTable will be forwarded.
|
| ctdlswMacRemoteFilterType |
.1.3.6.1.4.1.52.4.1.2.8.1.1.9 |
|
Specifies the type of address filtering to be applied
to SNA MAC frames received from a remote DLSw partner.
If set to block(1), any frame matching any entry in
ctdlswMacRemoteFilterTable will not be forwarded.
If set to pass(2), only frames matching any entry in
ctdlswMacRemoteFilterTable will be forwarded.
|
| ctdlswAcceptDynamicTConn |
.1.3.6.1.4.1.52.4.1.2.8.1.1.10 |
|
Specifies whether this DLSw allows unconfigured DLSw partners
to establish transport connections. Yes(1) means unconfigured
DLSw partners may establish transport connections with this
DLSw. No(2) means only user configured DLSw partners may
establish transport connections with this DLSw.
|
| ctdlswDefaultPortNumber |
.1.3.6.1.4.1.52.4.1.2.8.1.1.11 |
|
Specifies the index of the port whose associated IP address
will be used to identify this DLSw node to its DLSw partners.
The value must be consistent with 'ifIndex' of mib-II.
|
| ctdlswPortEntry |
.1.3.6.1.4.1.52.4.1.2.8.2.1.1 |
|
Each entry specifies configuration parameters for a port for
which the entry exists.
|
| ctdlswLocalNBFilterEntry |
.1.3.6.1.4.1.52.4.1.2.8.3.1.1 |
|
Information for one NetBIOS source-destination name pair.
|
| ctdlswRemoteNBFilterEntry |
.1.3.6.1.4.1.52.4.1.2.8.3.2.1 |
|
Information for one NetBIOS source-destination name pair.
|
| ctdlswLocalMacFilterEntry |
.1.3.6.1.4.1.52.4.1.2.8.3.3.1 |
|
Information for one source-destination MAC address pair.
|
| ctdlswRemoteMacFilterEntry |
.1.3.6.1.4.1.52.4.1.2.8.3.4.1 |
|
Information for one source-destination MAC address pair.
|
| ctdlswTConnEntry |
.1.3.6.1.4.1.52.4.1.2.8.4.1.1 |
| ctdlswEventAdminStatus |
.1.3.6.1.4.1.52.4.1.2.8.6.1.1 |
|
Set the administrative state of Data Link Switching event
logging. enabled(3) causes the event log to become active.
disabled(2) causes the event log to become inactive.
|
| ctdlswEventMaxEntries |
.1.3.6.1.4.1.52.4.1.2.8.6.1.2 |
|
Sets the maximum number of entries allowed in the event log
table. When the number of entries reaches the value of
ctdlswEventMaxEntries the first (oldest) entry is deleted
to allow a new entry to be added.
|
| ctdlswEventTraceAll |
.1.3.6.1.4.1.52.4.1.2.8.6.1.3 |
|
enabled(3) allows logging of all event types.
disabled(2) causes the event log filter table to specify
which events to log.
|
| ctdlswEventFilterEntry |
.1.3.6.1.4.1.52.4.1.2.8.6.2.1.1 |
|
Each entry specifies the filter for log entries. The
instance ctdlswEventProtocol refers to the instance used
in the nwRtgProtocolTable and nwComponentTable specified
by the ctrouter-mib.txt.
|
| ctdlswEventEntry |
.1.3.6.1.4.1.52.4.1.2.8.6.3.1.1 |
|
Each entry specifies events that have been logged.
|
| ctdlswPortName |
.1.3.6.1.4.1.52.4.1.2.8.2.1.1.2 |
|
Specifies the user friendly name for this port.
|
| ctdlswPortIndex |
.1.3.6.1.4.1.52.4.1.2.8.2.1.1.1 |
|
Specifies a unique value for each port. Values are derived
from 'ifIndex' of mib-II.
|
| ctdlswPortAddress |
.1.3.6.1.4.1.52.4.1.2.8.2.1.1.3 |
|
Specifies the MAC address of this port.
|
| ctdlswPortAdminStatus |
.1.3.6.1.4.1.52.4.1.2.8.2.1.1.4 |
|
Sets the administrative state of DLSw frame forwarding
for this port.
|
| ctdlswPortOperStatus |
.1.3.6.1.4.1.52.4.1.2.8.2.1.1.5 |
|
Specifies the current operating status of DLSw frame
forwarding for this port.
|
| ctdlswPortUpTime |
.1.3.6.1.4.1.52.4.1.2.8.2.1.1.6 |
|
Indicates the time (in hundredths of a second) since this port
was enabled. A value of zero means this port is not presently
enabled.
|
| ctdlswLocalNBFilterSrcName |
.1.3.6.1.4.1.52.4.1.2.8.3.1.1.1 |
|
The source NETBIOS name to filter on.
|
| ctdlswLocalNBFilterDestName |
.1.3.6.1.4.1.52.4.1.2.8.3.1.1.2 |
|
The destination NETBIOS NAME to filter on.
|
| ctdlswLocalNBFilterControl |
.1.3.6.1.4.1.52.4.1.2.8.3.1.1.3 |
|
Set this object to delete(3) to remove this entry. Set to
create(2) to add this entry. A get of this object will return
other(1).
|
| ctdlswRemoteNBFilterSrcName |
.1.3.6.1.4.1.52.4.1.2.8.3.2.1.1 |
|
The source NETBIOS name to filter on.
|
| ctdlswRemoteNBFilterDestName |
.1.3.6.1.4.1.52.4.1.2.8.3.2.1.2 |
|
The destination NETBIOS name to filter on.
|
| ctdlswRemoteNBFilterControl |
.1.3.6.1.4.1.52.4.1.2.8.3.2.1.3 |
|
Set this object to delete(3) to remove this entry. Set to
create(2) to add this entry. A get of this object will return
other(1).
|
| ctdlswLocalMacFilterSrcAddr |
.1.3.6.1.4.1.52.4.1.2.8.3.3.1.1 |
|
The source MAC Address to filter on.
|
| ctdlswLocalMacFilterSrcMask |
.1.3.6.1.4.1.52.4.1.2.8.3.3.1.2 |
|
The source MAC Address mask to filter on.
|
| ctdlswLocalMacFilterDestAddr |
.1.3.6.1.4.1.52.4.1.2.8.3.3.1.3 |
|
The destination MAC Address to filter on.
|
| ctdlswLocalMacFilterDestMask |
.1.3.6.1.4.1.52.4.1.2.8.3.3.1.4 |
|
The destination MAC Address mask to filter on.
|
| ctdlswLocalMacFilterControl |
.1.3.6.1.4.1.52.4.1.2.8.3.3.1.5 |
|
Set this object to delete(3) to remove this entry. Set to
create(2) to add this entry. A get of this object will return
other(1).
|
| ctdlswRemoteMacFilterSrcAddr |
.1.3.6.1.4.1.52.4.1.2.8.3.4.1.1 |
|
The source MAC Address to filter on.
|
| ctdlswRemoteMacFilterSrcMask |
.1.3.6.1.4.1.52.4.1.2.8.3.4.1.2 |
|
The source MAC Address mask to filter on.
|
| ctdlswRemoteMacFilterDestAddr |
.1.3.6.1.4.1.52.4.1.2.8.3.4.1.3 |
|
The destination MAC Address to filter on.
|
| ctdlswRemoteMacFilterDestMask |
.1.3.6.1.4.1.52.4.1.2.8.3.4.1.4 |
|
The destination MAC Address mask to filter on.
|
| ctdlswRemoteMacFilterControl |
.1.3.6.1.4.1.52.4.1.2.8.3.4.1.5 |
|
Set this object to delete(3) to remove this entry. Set to
create(2) to add this entry. A get of this object will return
other(1).
|
| ctdlswTConnRemoteTAddr |
.1.3.6.1.4.1.52.4.1.2.8.4.1.1.1 |
|
Specifies the remote transport address for this transport
connection. It can be defined by the user, or established
dynamically upon receiving a connection setup request from
another DLSw.
|
| ctdlswTConnControl |
.1.3.6.1.4.1.52.4.1.2.8.4.1.1.2 |
|
Set this object to delete(3) to remove this entry. Set to
create(2) to add this entry. A get of this object will
return other(1).
|
| ctdlswTConnUpTime |
.1.3.6.1.4.1.52.4.1.2.8.4.1.1.3 |
|
Indicates the time (in hundredths of a second) since this
transport connection was last established. A value of zero
means this transport connection is not presently established.
|
| ctdlswTConnOperStatus |
.1.3.6.1.4.1.52.4.1.2.8.4.1.1.4 |
|
Indicates the status of this transport connection.
|
| ctdlswTConnType |
.1.3.6.1.4.1.52.4.1.2.8.4.1.1.5 |
|
Indicates the means by which this transport connection was
determined. Configured(1) means this entry was user defined.
Dynamic(2) means this entry was not user defined but was
created as a result of a connection initiated by another DLSw.
|
| ctdlswEventFltrProtocol |
.1.3.6.1.4.1.52.4.1.2.8.6.2.1.1.1 |
|
Selects the protocol to log events from.
|
| ctdlswEventFltrIfNum |
.1.3.6.1.4.1.52.4.1.2.8.6.2.1.1.2 |
|
Specifies the port on which to log events.
|
| ctdlswEventFltrControl |
.1.3.6.1.4.1.52.4.1.2.8.6.2.1.1.3 |
|
Setting this field to delete will allow entries to be
removed from the table. This is done by adding new entries
with instance fields that match the entry to be removed from
the table. The new entry being added must have this control
field set to delete in order for the matching entry already
in the table to be deleted. Setting this field to add will
add the entry to the table.
|
| ctdlswEventFltrType |
.1.3.6.1.4.1.52.4.1.2.8.6.2.1.1.4 |
|
This bit field mask filter will allow only events of
certain types to be logged. By default all types will be
logged. Clearing event types from this field will cause
those types not to be logged. Adding event types to this
field will enable those types to be logged.
|
| ctdlswEventFltrSeverity |
.1.3.6.1.4.1.52.4.1.2.8.6.2.1.1.5 |
|
This filter controls the amount of logging by ignoring events
of lower priority than that specified by the filter value.
Specifying highest(1) causes all events except those of highest
severity to be ignored. Specifying highmed(2) causes lowest
severity events to be ignored. Specifying highlow(3) causes
all events to be logged. highmed(2) is the default setting.
|
| ctdlswEventFltrAction |
.1.3.6.1.4.1.52.4.1.2.8.6.2.1.1.6 |
|
This field specifies how the events are to be logged.
Specifying log(1) stores the events in the event log
table (defined below). Specifying trap(2) sends events
out through the trap mechanism. Specifying logTrap(3)
does both.
|
| ctdlswEventNumber |
.1.3.6.1.4.1.52.4.1.2.8.6.3.1.1.1 |
|
The number uniquely identifies events.
|
| ctdlswEventTime |
.1.3.6.1.4.1.52.4.1.2.8.6.3.1.1.2 |
|
This number specifies when the event was logged.
|
| ctdlswEventType |
.1.3.6.1.4.1.52.4.1.2.8.6.3.1.1.3 |
|
Specifies type of event logged.
|
| ctdlswEventSeverity |
.1.3.6.1.4.1.52.4.1.2.8.6.3.1.1.4 |
|
Specifies the severity of the event logged.
|
| ctdlswEventProtocol |
.1.3.6.1.4.1.52.4.1.2.8.6.3.1.1.5 |
|
Specifies the protocol where the event occured.
|
| ctdlswEventIfNum |
.1.3.6.1.4.1.52.4.1.2.8.6.3.1.1.6 |
|
Specifies the port the event occurred on.
|
| ctdlswEventTextString |
.1.3.6.1.4.1.52.4.1.2.8.6.3.1.1.7 |
|
Specifies the actual text string to be logged.
|
| ctdlswPortTable |
.1.3.6.1.4.1.52.4.1.2.8.2.1 |
|
This table contains an entry for each port, and specifies
configuration parameters used to establish circuits over that
port. This table is indexed by ctdlswPortName, which
identifies the port for which an entry exists. These port
configuration entries will be provided automatically based on
the physical port configuration. These entries cannot be
created or deleted - only modified.
|
| ctdlswLocalNBFilterTable |
.1.3.6.1.4.1.52.4.1.2.8.3.1 |
|
A list of NETBIOS source-destination name pairs whose frames
are allowed (or not allowed) to be forwarded via this DLSw.
Only source-destination name pairs from locally generated
NetBIOS frames are compared against entries in this table.
|
| ctdlswRemoteNBFilterTable |
.1.3.6.1.4.1.52.4.1.2.8.3.2 |
|
A list of NETBIOS source-destination name pairs whose frames
are allowed (or not allowed) to be forwarded via this DLSw.
Only source-destination name pairs from NetBIOS frames received
from remote DLSw partners are compared against entries in this table.
|
| ctdlswLocalMacFilterTable |
.1.3.6.1.4.1.52.4.1.2.8.3.3 |
|
A list of source-destination MAC address pairs whose frames
are allowed (or not allowed) to be forwarded via this DLSw.
Only source-destination name pairs from locally generated
SNA MAC frames are compared against entries in this table.
|
| ctdlswRemoteMacFilterTable |
.1.3.6.1.4.1.52.4.1.2.8.3.4 |
|
A list of source-destination MAC address pairs whose frames
are allowed (or not allowed) to be forwarded via this DLSw.
Only source-destination name pairs from SNA MAC frames received
from remote DLSw partners are compared against entries in this table.
|
| ctdlswTConnTable |
.1.3.6.1.4.1.52.4.1.2.8.4.1 |
|
A list of transport connections which are either user defined
or dynamically created for this DLSw.
|
| ctdlswEventFilterTable |
.1.3.6.1.4.1.52.4.1.2.8.6.2.1 |
|
This table contains descriptions of how to filter log entries.
|
| ctdlswEventTable |
.1.3.6.1.4.1.52.4.1.2.8.6.3.1 |
|
This table contains all events that have been logged.
|
