CTRON-ROUTERS-INTERNAL-MIB device MIB details by Enterasys Networks Inc

CTRON-ROUTERS-INTERNAL-MIB file content

The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.

Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.

Use ActiveXperts Network Monitor 2024 to import vendor-specific MIB files, inclusing CTRON-ROUTERS-INTERNAL-MIB.

Vendor:	Enterasys Networks Inc
Mib:	CTRON-ROUTERS-INTERNAL-MIB  [download]  [view objects]
Tool:	ActiveXperts Network Monitor 2024 [download]    (ships with advanced SNMP/MIB tools)

CTRON-ROUTERS-INTERNAL-MIB DEFINITIONS ::= BEGIN

--  ctron-routers-internal-mib.txt
--  Revision: 1.00.00
--  Part Number:  
--  Date: Feb 8, 1994

--  Cabletron Systems, Inc.
--  35 Industrial Way, P.O. Box 5005
--  Rochester, NH 03867-0505
--  (603) 332-9400
--  support@ctron.com

--  This module provides authoritative definitions for Cabletron's
--  enterprise specific Routing Services MIB.  This MIB contains
--  objects which provide a high-level view of the routed and routing
--  protocols for the Cabletron Router.  Essentially, this MIB
--  allows for the dynamic "discovery" of routing services within
--  Cabletron devices.

--  This module will be extended, as needed.
--

--  Cabletron Systems reserves the right to make changes in
--  specifications and other information contained in this document
--  without prior notice.  The reader should consult Cabletron Systems
--  to determine whether any such changes have been made.
--
--  In no event shall Cabletron Systems be liable for any incidental,
--  indirect, special, or consequential damages whatsoever (including
--  but not limited to lost profits) arising out of or related to this
--  document or the information contained in it, even if Cabletron
--  Systems has been advised of, known, or should have known, the
--  possibility of such damages.
--
--  Cabletron grants vendors, end-users, and other interested parties
--  a non-exclusive license to use this Specification in connection
--  with the management of Cabletron products.

--  Copyright August 92 Cabletron Systems



IMPORTS
        OBJECT-TYPE     
                FROM RFC-1212
        DisplayString
                FROM RFC1213-MIB
        enterprises, Counter, TimeTicks
                FROM RFC1155-SMI;


cabletron                       OBJECT IDENTIFIER ::= { enterprises 52 }

mibs                            OBJECT IDENTIFIER ::= { cabletron 4 }
                
ctron                           OBJECT IDENTIFIER ::= { mibs 1 }

ctronExp                        OBJECT IDENTIFIER ::= { mibs 2 }

ctronRouterExp                  OBJECT IDENTIFIER ::= { ctronExp 2 }

ctNetwork                       OBJECT IDENTIFIER ::= { ctron 3 }

nwRouter                        OBJECT IDENTIFIER ::= { ctronRouterExp 2 }

nwRtrTemp                       OBJECT IDENTIFIER ::= { nwRouter 99 }

nwRtrTemp1                      OBJECT IDENTIFIER ::= { nwRtrTemp 2 }

nwRtrTemp2                      OBJECT IDENTIFIER ::= { nwRtrTemp1 2 }

--
-- The Cabletron Routing Services Temp Area
--


nwRtrSoftReset  OBJECT-TYPE
                SYNTAX  INTEGER {
                        reset(0)
                        }
                ACCESS  read-write
                STATUS  mandatory
                DESCRIPTION
                        "Executes a software reset of the device when reset(0)
                        is written to this object. This reset does not reload 
                        software from Flash EPROM." 
                ::= { nwRtrTemp2 1 }

END