| sfpsConnectionEntry |
.1.3.6.1.4.1.52.4.2.4.2.1.3.1.1 |
|
Each entry specifies the connection information for the
active connection for which the entry exists.
|
| sfpsAPIVerb |
.1.3.6.1.4.1.52.4.2.4.2.1.4.1 |
|
Specifies the action to be initiated as a result of setting
this leaf.
|
| sfpsAPIInPort |
.1.3.6.1.4.1.52.4.2.4.2.1.4.2 |
|
Specifies the ingress port of the switch.
|
| sfpsAPIInHeaderType |
.1.3.6.1.4.1.52.4.2.4.2.1.4.3 |
|
Specfies the type of header being mapped.
|
| sfpsAPIInHeaderLength |
.1.3.6.1.4.1.52.4.2.4.2.1.4.4 |
|
Specifies the length of the header value.
|
| sfpsAPIInHeaderValue |
.1.3.6.1.4.1.52.4.2.4.2.1.4.5 |
|
Specifies the actual inHeader value for the mapping.
|
| sfpsAPIOutPort |
.1.3.6.1.4.1.52.4.2.4.2.1.4.6 |
|
Specifies the egress port of the switch.
|
| sfpsAPIOutHeaderType |
.1.3.6.1.4.1.52.4.2.4.2.1.4.7 |
|
Specfies the type of header being mapped. This value
defaults to the value given to sfpsAPIInHeaderType.
|
| sfpsAPIOutHeaderLength |
.1.3.6.1.4.1.52.4.2.4.2.1.4.8 |
|
Specifies the length of the header value. This value
defaults to the value given to sfpsAPIInHeaderLength.
|
| sfpsAPIOutHeaderValue |
.1.3.6.1.4.1.52.4.2.4.2.1.4.9 |
|
Specifies the actual outHeader value for the mapping.
This value defaults to the value given to
sfpsAPIInHeaderValue.
|
| sfpsAPIArgumentDirection |
.1.3.6.1.4.1.52.4.2.4.2.1.4.10 |
|
Specifies the direction of the connection.
|
| sfpsAPIArgumentOwner |
.1.3.6.1.4.1.52.4.2.4.2.1.4.11 |
|
Specifies whether or not callcontrol is owned by this
agent switch. If the call is owned, then the switch will
be responsible for releasing the call. THis is used
mainly when transferring call ownership in call re-routing
and in setting up originating calls.
|
| sfpsAPIArgumentPriority |
.1.3.6.1.4.1.52.4.2.4.2.1.4.12 |
|
Specifies the outbound priority of the connection.
|
| sfpsAPIType |
.1.3.6.1.4.1.52.4.2.4.2.1.4.13 |
|
Sets the type of connection that should be setup.
|
| sfpsConnectionStatsMaxCnxs |
.1.3.6.1.4.1.52.4.2.4.2.1.3.4.1 |
|
The maximum number of bi-directional connections allocated
for the switch.
|
| sfpsConnectionStatsTotalCnxs |
.1.3.6.1.4.1.52.4.2.4.2.1.3.4.2 |
|
The total number of bi-directional connections used in
the switch.
|
| sfpsConnectionStatsSwitchedCnxs |
.1.3.6.1.4.1.52.4.2.4.2.1.3.4.3 |
|
The number of bi-directional connections used in the switch
with type <switched>
|
| sfpsConnectionStatsVlanCnxs |
.1.3.6.1.4.1.52.4.2.4.2.1.3.4.4 |
|
The number of bi-directional connections used in the switch
with type <VLAN>
|
| sfpsConnectionStatsFilterCnxs |
.1.3.6.1.4.1.52.4.2.4.2.1.3.4.5 |
|
The number of bi-directional connections used in the switch
with type <Filter>
|
| sfpsConnectionStatsSelfProgCnxs |
.1.3.6.1.4.1.52.4.2.4.2.1.3.4.6 |
|
The number of bi-directional connections used in the switch
with type <self Programmed Connections>
|
| sfpsConnectionStatsProvsnedCnxs |
.1.3.6.1.4.1.52.4.2.4.2.1.3.4.7 |
|
The number of bi-directional connections used in the switch
with type <provisioned>
|
| sfpsConnectionStatsTapCnxs |
.1.3.6.1.4.1.52.4.2.4.2.1.3.4.8 |
|
The number of bi-directional connections used in the switch
with type <tap>
|
| sfpsConnectionStatsMcastCnxs |
.1.3.6.1.4.1.52.4.2.4.2.1.3.4.9 |
|
The number of bi-directional connections used in the switch
with type <multicast>
|
| sfpsConnectionStatsNetPortFilterCnxs |
.1.3.6.1.4.1.52.4.2.4.2.1.3.4.10 |
|
The number of bi-directional connections used in the switch
with type <network port filter connections>
|
| sfpsConnectionStatsNonCriticalVlans |
.1.3.6.1.4.1.52.4.2.4.2.1.3.4.11 |
|
Number of non-critical connections - these will be aged first
|
| sfpsConnectionStatsAddErrors |
.1.3.6.1.4.1.52.4.2.4.2.1.3.4.12 |
|
Number of errors on adding a connnection
|
| sfpsConnectionStatsDeleteErrors |
.1.3.6.1.4.1.52.4.2.4.2.1.3.4.13 |
|
Number of errors on deleting a connection
|
| sfpsConnectionTestAPIVerb |
.1.3.6.1.4.1.52.4.2.4.2.1.3.6.1 |
| sfpsConnectionTestAPIType |
.1.3.6.1.4.1.52.4.2.4.2.1.3.6.2 |
| sfpsConnectionTestAPINumCnxs |
.1.3.6.1.4.1.52.4.2.4.2.1.3.6.3 |
| sfpsConnectionTestAPIMacAddr |
.1.3.6.1.4.1.52.4.2.4.2.1.3.6.4 |
| sfpsConnectionTestAPIPort |
.1.3.6.1.4.1.52.4.2.4.2.1.3.6.5 |
| sfpsConnectionConfigAPIVerb |
.1.3.6.1.4.1.52.4.2.4.2.1.3.3.1 |
|
Specifies the verb.
|
| sfpsConnectionConfigAPICnxHiMark |
.1.3.6.1.4.1.52.4.2.4.2.1.3.3.2 |
|
Specifies the percentage of the Connection Table needed
to be full before beginning aging.
|
| sfpsConnectionConfigAPICnxNumToAge |
.1.3.6.1.4.1.52.4.2.4.2.1.3.3.3 |
|
Specifies the number of connections to age at each pass.
|
| sfpsConnectionConfigAPIAgePeriod |
.1.3.6.1.4.1.52.4.2.4.2.1.3.3.4 |
|
Specifies the age period. Units in minutes. 0 - No periodic aging
N - age every N minutes
|
| sfpsConnectionConfigAPIAgePassInProgress |
.1.3.6.1.4.1.52.4.2.4.2.1.3.3.5 |
|
Specifies whether the age pass is in progress. 0 - not aging now
1 - aging now.
|
| sfpsConnectionConfigAPICurCapacity |
.1.3.6.1.4.1.52.4.2.4.2.1.3.3.6 |
|
Specifies the percentage of the Connection Table used.
|
| sfpsConnectionConfigAPILastPassTime |
.1.3.6.1.4.1.52.4.2.4.2.1.3.3.7 |
|
Specifies the time that the last age pass occured.
|
| sfpsConnectionConfigAPITimeSinceLastPass |
.1.3.6.1.4.1.52.4.2.4.2.1.3.3.8 |
|
Specifies the time since the last age pass.
|
| sfpsConnectionConfigAPIAgePassDelta |
.1.3.6.1.4.1.52.4.2.4.2.1.3.3.9 |
|
Specifies the time between the last two age passes.
|
| sfpsConnectionConfigAPIAgePassCount |
.1.3.6.1.4.1.52.4.2.4.2.1.3.3.10 |
|
Specifies the number of aging passes that have occured.
|
| sfpsConnectionConfigAPIAgeStatsHiMark |
.1.3.6.1.4.1.52.4.2.4.2.1.3.3.11 |
| sfpsConnectionConfigAPIStatsAgingEnable |
.1.3.6.1.4.1.52.4.2.4.2.1.3.3.12 |
| sfpsConnectionConfigAPIAgeStatsAgingSupported |
.1.3.6.1.4.1.52.4.2.4.2.1.3.3.13 |
| sfpsConnectionConfigAPIIdleCnxs |
.1.3.6.1.4.1.52.4.2.4.2.1.3.3.14 |
| sfpsConnectionConfigAPIActiveCnxs |
.1.3.6.1.4.1.52.4.2.4.2.1.3.3.15 |
| sfpsConnectionQueryAPIVerb |
.1.3.6.1.4.1.52.4.2.4.2.1.3.5.1 |
|
Specifies the action to be initiated as a result of setting
this leaf.
|
| sfpsConnectionQueryAPIDestAddr |
.1.3.6.1.4.1.52.4.2.4.2.1.3.5.2 |
|
Destination MAC address.
|
| sfpsConnectionQueryAPISourceAddr |
.1.3.6.1.4.1.52.4.2.4.2.1.3.5.3 |
|
Source MAC address.
|
| sfpsConnectionQueryAPIInPort |
.1.3.6.1.4.1.52.4.2.4.2.1.3.5.4 |
|
Source port number.
|
| sfpsConnectionQueryAPIOutPort |
.1.3.6.1.4.1.52.4.2.4.2.1.3.5.5 |
|
Destination port number.
|
| sfpsConnectionQueryAPICtrlStatus |
.1.3.6.1.4.1.52.4.2.4.2.1.3.5.6 |
|
Control Status
|
| sfpsConnectionQueryAPIAdminStatus |
.1.3.6.1.4.1.52.4.2.4.2.1.3.5.7 |
|
Administrative Status.
|
| sfpsConnectionQueryAPIAge |
.1.3.6.1.4.1.52.4.2.4.2.1.3.5.8 |
|
Age of connection.
|
| sfpsConnectionQueryAPIQueryType |
.1.3.6.1.4.1.52.4.2.4.2.1.3.5.9 |
|
Type of connection.
|
| sfpsConnectionQueryAPIOwner |
.1.3.6.1.4.1.52.4.2.4.2.1.3.5.10 |
|
Specifies whether or not Call control is owned by this agent
switch. If the call is owned, then the switch
will be responsible for releasing the call. This is
used mainly when transferring call ownership in call
re-routing and in setting up originating calls.
|
| sfpsConnectionQueryAPIPkts |
.1.3.6.1.4.1.52.4.2.4.2.1.3.5.11 |
|
Number of packets switched on this connection.
|
| sfpsConnectionQueryAPIBytes |
.1.3.6.1.4.1.52.4.2.4.2.1.3.5.12 |
|
Number of bytes switched on this connection.
|
| sfpsConnectionQueryAPICanAge |
.1.3.6.1.4.1.52.4.2.4.2.1.3.5.13 |
|
Determine if this connection will be aged - (1) means to age.
|
| sfpsConnectionQueryAPIOutPorts |
.1.3.6.1.4.1.52.4.2.4.2.1.3.5.14 |
|
If OutPorts is 1 - the multiple outports will be displayed in
a text format.
|
| sfpsConnectionQueryAPIMacAddr |
.1.3.6.1.4.1.52.4.2.4.2.1.3.5.15 |
|
MAC address.
|
| sfpsConnectionQueryAPISecInPort |
.1.3.6.1.4.1.52.4.2.4.2.1.3.5.16 |
| sfpsConnectionQueryAPISecOutPort |
.1.3.6.1.4.1.52.4.2.4.2.1.3.5.17 |
| sfpsConnectionQueryAPISecOutPorts |
.1.3.6.1.4.1.52.4.2.4.2.1.3.5.18 |
| sfpsConnectionLookupAPIVerb |
.1.3.6.1.4.1.52.4.2.4.2.1.3.2.1 |
|
Specifies the action to be initiated as a result of setting
this leaf.
|
| sfpsConnectionLookupAPIMacAddr |
.1.3.6.1.4.1.52.4.2.4.2.1.3.2.2 |
|
MAC address to be looked up as either the Source or Destination addresses.
|
| sfpsConnectionLookupAPIDestAddr |
.1.3.6.1.4.1.52.4.2.4.2.1.3.2.3 |
|
Destination MAC address
|
| sfpsConnectionLookupAPISourceAddr |
.1.3.6.1.4.1.52.4.2.4.2.1.3.2.4 |
|
Source MAC address
|
| sfpsConnectionLookupAPIPrimInPort |
.1.3.6.1.4.1.52.4.2.4.2.1.3.2.5 |
|
Source port number
|
| sfpsConnectionLookupAPIPrimOutPort |
.1.3.6.1.4.1.52.4.2.4.2.1.3.2.6 |
|
Destination port number. If -1, denotes multiple out ports.
|
| sfpsConnectionLookupAPISecInPort |
.1.3.6.1.4.1.52.4.2.4.2.1.3.2.7 |
|
Source port number
|
| sfpsConnectionLookupAPISecOutPort |
.1.3.6.1.4.1.52.4.2.4.2.1.3.2.8 |
|
Destination port number. If 01, denotes multiple out ports
|
| sfpsConnectionLookupAPICtrlStatus |
.1.3.6.1.4.1.52.4.2.4.2.1.3.2.9 |
|
Control status
|
| sfpsConnectionLookupAPIAdminStatus |
.1.3.6.1.4.1.52.4.2.4.2.1.3.2.10 |
|
Administrative status
|
| sfpsConnectionLookupAPIAge |
.1.3.6.1.4.1.52.4.2.4.2.1.3.2.11 |
|
Age of connection
|
| sfpsConnectionLookupAPIType |
.1.3.6.1.4.1.52.4.2.4.2.1.3.2.12 |
|
Type of connection
|
| sfpsConnectionLookupAPIPkts |
.1.3.6.1.4.1.52.4.2.4.2.1.3.2.13 |
|
Number of packets switched on this connection
|
| sfpsConnectionLookupAPIBytes |
.1.3.6.1.4.1.52.4.2.4.2.1.3.2.14 |
|
Number of bytes switched on this connection
|
| sfpsConnectionLookupAPICanAge |
.1.3.6.1.4.1.52.4.2.4.2.1.3.2.15 |
|
Boolean to determine if this connection will be aged. True (1) means to age.
|
| sfpsConnectionLookupAPIPrimOutPorts |
.1.3.6.1.4.1.52.4.2.4.2.1.3.2.16 |
|
If Primary OutPort is -1, the multiple outports will be displayed in text format
|
| sfpsConnectionLookupAPISecOutPorts |
.1.3.6.1.4.1.52.4.2.4.2.1.3.2.17 |
|
If Secondary OutPort is -1, the multiple outports will be displayed in text format
|
| sfpsCNXPacketStatsVer1Tx |
.1.3.6.1.4.1.52.4.2.4.2.1.15.1 |
|
Version 1 transmission
|
| sfpsCNXPacketStatsVer2Tx |
.1.3.6.1.4.1.52.4.2.4.2.1.15.2 |
|
Version 2 transmission
|
| sfpsCNXPacketStatsVer1Rx |
.1.3.6.1.4.1.52.4.2.4.2.1.15.3 |
|
Version 1 receive
|
| sfpsCNXPacketStatsVer2Rx |
.1.3.6.1.4.1.52.4.2.4.2.1.15.4 |
|
Version 2 receive
|
| sfpsCNXPacketStatsOpCode1Tx |
.1.3.6.1.4.1.52.4.2.4.2.1.15.5 |
|
Operation code 1 transmission
|
| sfpsCNXPacketStatsOpCode2Tx |
.1.3.6.1.4.1.52.4.2.4.2.1.15.6 |
|
Operation code 2 tranmission
|
| sfpsCNXPacketStatsOpCode1Rx |
.1.3.6.1.4.1.52.4.2.4.2.1.15.7 |
|
Operation code 1 receive
|
| sfpsCNXPacketStatsOpCode2Rx |
.1.3.6.1.4.1.52.4.2.4.2.1.15.8 |
|
Operation code 2 receive
|
| sfpsCNXPacketStatsRxErrors |
.1.3.6.1.4.1.52.4.2.4.2.1.15.9 |
|
Receive errors
|
| sfpsConnectionDestination |
.1.3.6.1.4.1.52.4.2.4.2.1.3.1.1.1 |
|
The destination SFPS address for this source/destination
connection.
|
| sfpsConnectionSource |
.1.3.6.1.4.1.52.4.2.4.2.1.3.1.1.2 |
|
The source SFPS address for this source/destination
connection.
|
| sfpsConnectionPrimInPort |
.1.3.6.1.4.1.52.4.2.4.2.1.3.1.1.3 |
|
Identifies the primary inbound SFPS switch port.
|
| sfpsConnectionPrimOutPort |
.1.3.6.1.4.1.52.4.2.4.2.1.3.1.1.4 |
|
Identifies the primary outbound SFPS switch port. All switched
traffic for this connection will be transmitted on
this outbound port.
|
| sfpsConnectionSecInPort |
.1.3.6.1.4.1.52.4.2.4.2.1.3.1.1.5 |
|
Identifies the secondaryinbound SFPS switch port.
|
| sfpsConnectionSecOutPort |
.1.3.6.1.4.1.52.4.2.4.2.1.3.1.1.6 |
|
Identifies the secondary outbound SFPS switch port. All switched
traffic for this connection will be transmitted on
this outbound port.
|
| sfpsConnectionCtrlStatus |
.1.3.6.1.4.1.52.4.2.4.2.1.3.1.1.7 |
|
The control state of the SFPS connection.
|
| sfpsConnectionAdminStatus |
.1.3.6.1.4.1.52.4.2.4.2.1.3.1.1.8 |
|
The administrative state of the SFPS connection.
|
| sfpsConnectionAge |
.1.3.6.1.4.1.52.4.2.4.2.1.3.1.1.9 |
|
Indicates the age of the connection.
|
| sfpsConnectionType |
.1.3.6.1.4.1.52.4.2.4.2.1.3.1.1.10 |
|
Sets the type of connection. Provisioned connections are
setup manually; switched and vlan connections are setup
dynammically.
|
| sfpsConnectionPkts |
.1.3.6.1.4.1.52.4.2.4.2.1.3.1.1.11 |
|
Indicates the total number of packets sent on this connection.
|
| sfpsConnectionBytes |
.1.3.6.1.4.1.52.4.2.4.2.1.3.1.1.12 |
|
Indicates the total number of bytes sent on this connection.
|
| sfpsConnectionCanAge |
.1.3.6.1.4.1.52.4.2.4.2.1.3.1.1.13 |
| sfpsConnectionPrimOutPorts |
.1.3.6.1.4.1.52.4.2.4.2.1.3.1.1.14 |
|
Identifies a list of outbound SFPS switch ports. All
switched traffic for this connection will be transmitted
on these outbound ports.
|
| sfpsConnectionSecOutPorts |
.1.3.6.1.4.1.52.4.2.4.2.1.3.1.1.15 |
|
Identifies a list of outbound SFPS switch ports. All
switched traffic for this connection will be transmitted
on these outbound ports.
|
