CTRON-SFPS-L4SS-MIB device MIB details by Enterasys Networks Inc

CTRON-SFPS-L4SS-MIB file content

The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.

Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.

Use ActiveXperts Network Monitor 2024 to import vendor-specific MIB files, inclusing CTRON-SFPS-L4SS-MIB.

Vendor:	Enterasys Networks Inc
Mib:	CTRON-SFPS-L4SS-MIB  [download]  [view objects]
Tool:	ActiveXperts Network Monitor 2024 [download]    (ships with advanced SNMP/MIB tools)

CTRON-SFPS-L4SS-MIB DEFINITIONS ::= BEGIN

--  sfps-l4ss.mib
--  Revision: 0.0.06
--  Date: June 25, 1999
--
--  Cabletron Systems, Inc.
--  35 Industrial Way, P.O. Box 5005
--  Rochester, NH 03867-0505
--  (603) 332-9400
--  support@ctron.com

--  This module provides authoritative definitions for the
--  Layer 4 Smart Switch (L4SS).
--
--  This module will be extended, as required.
--

--  Cabletron Systems reserves the right to make changes in
--  specification and other information contained in this document
--  without prior notice.  The reader should consult Cabletron Systems
--  to determine whether any such changes have been made.
--
--  In no event shall Cabletron Systems be liable for any incidental,
--  indirect, special, or consequential damages whatsoever (including
--  but not limited to lost profits) arising out of or related to this
--  document or the information contained in it, even if Cabletron
--  Systems has been advised of, known, or should have known, the
--  possibility of such damages.
--
--  Cabletron grants vendors, end-users, and other interested parties
--  a non-exclusive license to use this Specification in connection
--  with the management of Cabletron products.
--  Copyright October 93 Cabletron Systems
--

 
IMPORTS
      OBJECT-TYPE
                FROM RFC-1212
      DisplayString, PhysAddress
                FROM RFC1213-MIB
      IpAddress, Counter, TimeTicks
                FROM RFC1155-SMI

--  These Objects are defined in the file sfps-inc.mib.txt
      switchSFPS       
                FROM CTRON-SFPS-INCLUDE-MIB;


-- New SFPS Switch Group.
sfpsL4SS        OBJECT IDENTIFIER ::= { switchSFPS 6 }

-- The SFPS Layer 4 SmartSwitch Groups.
sfpsL4CP        OBJECT IDENTIFIER ::= { sfpsL4SS 1 }
sfpsL4CDR       OBJECT IDENTIFIER ::= { sfpsL4SS 2 }

l4cpStats       OBJECT IDENTIFIER ::= { sfpsL4CP 1 }
l4cpConfig      OBJECT IDENTIFIER ::= { sfpsL4CP 2 }
l4cpActions     OBJECT IDENTIFIER ::= { sfpsL4CP 3 }

l4cdrStats      OBJECT IDENTIFIER ::= { sfpsL4CDR 1 }
l4cdrConfig     OBJECT IDENTIFIER ::= { sfpsL4CDR 2 }
l4cdrActions    OBJECT IDENTIFIER ::= { sfpsL4CDR 3 }

--  Textual Conventions

HexInteger ::= INTEGER
--  display this integer in hex format

SfpsAddress ::= OCTET STRING (SIZE (6))
--  this will map to a MAC address



-- SFPS L4CP Scalars

sfpsL4CPDisableTCPAckCheck  OBJECT-TYPE
        SYNTAX  INTEGER { yes(1),
                          no(2) }
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "This variable indicates whether or not TCP
                 segments whose ACK bit is off are allowed to use an
                 existing flow table entry.  When set to 2, a TCP
                 segment whose ACK bit is off is always treated as an
                 exception packet.  This variable takes effect immediately,
                 and its value is peristent."
        ::= { l4cpConfig 1 }



-- SFPS FLOW TABLE

sfpsL4CPFlowTable     OBJECT-TYPE
        SYNTAX  SEQUENCE OF SfpsL4CPFlowEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "This table describes each conversation between a pair
                 or Layer 3 or Layer 4 endpoints."
        ::= { sfpsL4CP 4 }

sfpsL4CPFlowEntry    OBJECT-TYPE
        SYNTAX  SfpsL4CPFlowEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "Each entry contains statistics and information for
                 a pair of Layer 3 or Layer 4 endpoints."
        INDEX   { sfpsL4CPFlowCnxIndex,
                  sfpsL4CPFlowSecL3Address,
                  sfpsL4CPFlowPrimL3Address,
                  sfpsL4CPFlowSubprotocol,
                  sfpsL4CPFlowSecMatchAnyDyn,
                  sfpsL4CPFlowPrimMatchAnyDyn,
                  sfpsL4CPFlowSecProtPort,
                  sfpsL4CPFlowPrimProtPort } 
        ::= { sfpsL4CPFlowTable 1 }

SfpsL4CPFlowEntry ::=
        SEQUENCE {
                sfpsL4CPFlowCnxIndex         INTEGER,  
                sfpsL4CPFlowSecL3Address     DisplayString,
                sfpsL4CPFlowPrimL3Address    DisplayString,
                sfpsL4CPFlowSubprotocol      HexInteger,
                sfpsL4CPFlowSecMatchAnyDyn   INTEGER,
                sfpsL4CPFlowPrimMatchAnyDyn  INTEGER,
                sfpsL4CPFlowSecProtPort      INTEGER,
                sfpsL4CPFlowPrimProtPort     INTEGER,
                sfpsL4CPFlowSecSubstApplies  INTEGER,
                sfpsL4CPFlowPrimSubstApplies INTEGER,
                sfpsL4CPFlowSecInPkts        Counter,
                sfpsL4CPFlowSecInOctets      Counter,
                sfpsL4CPFlowPrimInPkts       Counter,
                sfpsL4CPFlowPrimInOctets     Counter,
                sfpsL4CPFlowFlowAge          TimeTicks,
                sfpsL4CPFlowFlowLastUse      TimeTicks,
                sfpsL4CPFlowID               INTEGER
         }  

sfpsL4CPFlowCnxIndex   OBJECT-TYPE
        SYNTAX  INTEGER(0..'7FFFFFFF'h)  
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Index (1-based) of the SFPSGAPI connection table entry 
                 to which this flow belongs."
        ::= { sfpsL4CPFlowEntry 1 }

sfpsL4CPFlowSecL3Address   OBJECT-TYPE
        SYNTAX  DisplayString
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The Layer 3 address of the secondary endpoint for this flow.
                 The secondary endpoint is the one having the higher MAC address."
        ::= { sfpsL4CPFlowEntry 2 }

sfpsL4CPFlowPrimL3Address   OBJECT-TYPE
        SYNTAX  DisplayString
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The Layer 3 address of the primary endpoint for this flow.
                 The primary endpoint is the one having the lower MAC address."
        ::= { sfpsL4CPFlowEntry 3 }

sfpsL4CPFlowSubprotocol   OBJECT-TYPE
        SYNTAX  HexInteger(0..'7FFFFFFF'h)
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "This value identifies the Layer 4 protocol.  It 
                 corresponds to the IP 'Protocol' field as described 
                 in the 'Assigned Numbers' RFC."
        ::= { sfpsL4CPFlowEntry 4 }

sfpsL4CPFlowSecMatchAnyDyn   OBJECT-TYPE
        SYNTAX  INTEGER { yes(1),
                          no(2) }
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "If this is a TCP or UDP entry, this value specifies whether
                 or not the protocol port of the secondary endpoint should
                 be treated as a wildcard, able to match any port number above
                 1023."
        ::= { sfpsL4CPFlowEntry 5 }

sfpsL4CPFlowPrimMatchAnyDyn   OBJECT-TYPE
        SYNTAX  INTEGER { yes(1),
                          no(2) }
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "If this is a TCP or UDP entry, this value specifies whether
                 or not the protocol port of the primary endpoint should
                 be treated as a wildcard, able to match any port number above
                 1023."
        ::= { sfpsL4CPFlowEntry 6 }

sfpsL4CPFlowSecProtPort   OBJECT-TYPE
        SYNTAX  INTEGER(0..'FFFF'h)
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "If this is a TCP or UDP entry, this value indicates the
                 protocol port number of the secondary endpoint.
                 Otherwise, this field is zero."
        ::= { sfpsL4CPFlowEntry 7 }

sfpsL4CPFlowPrimProtPort   OBJECT-TYPE
        SYNTAX  INTEGER(0..'FFFF'h)
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "If this is a TCP or UDP entry, this value indicates the
                 protocol port number of the primary endpoint.
                 Otherwise, this field is zero."
        ::= { sfpsL4CPFlowEntry 8 }

sfpsL4CPFlowSecSubstApplies   OBJECT-TYPE
        SYNTAX  INTEGER { yes(1),
                          no(2) }
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Indication of whether or not MAC address substitution
                 applies to the secondary endpoint for this flow."
        ::= { sfpsL4CPFlowEntry 9 }

sfpsL4CPFlowPrimSubstApplies   OBJECT-TYPE
        SYNTAX  INTEGER { yes(1),
                          no(2) }
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Indication of whether or not MAC address substitution
                 applies to the primary endpoint for this flow."
        ::= { sfpsL4CPFlowEntry 10 }

sfpsL4CPFlowSecInPkts   OBJECT-TYPE
        SYNTAX  Counter
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Count of packets transmitted from primary to secondary."
        ::= { sfpsL4CPFlowEntry 11 }

sfpsL4CPFlowSecInOctets   OBJECT-TYPE
        SYNTAX  Counter
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Count of octets transmitted from primary to secondary."
        ::= { sfpsL4CPFlowEntry 12 }

sfpsL4CPFlowPrimInPkts   OBJECT-TYPE
        SYNTAX  Counter
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Count of packets transmitted from secondary to primary."
        ::= { sfpsL4CPFlowEntry 13 }

sfpsL4CPFlowPrimInOctets   OBJECT-TYPE
        SYNTAX  Counter
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Count of octets transmitted from secondary to primary."
        ::= { sfpsL4CPFlowEntry 14 }

sfpsL4CPFlowFlowAge   OBJECT-TYPE
        SYNTAX  TimeTicks
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Time elapsed since this entry was created."
        ::= { sfpsL4CPFlowEntry 15 }

sfpsL4CPFlowFlowLastUse   OBJECT-TYPE
        SYNTAX  TimeTicks
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Time elapsed since this entry was last used to send data."
        ::= { sfpsL4CPFlowEntry 16 }

sfpsL4CPFlowID   OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The Call Detail Recording flow ID for this flow, or zero
                 if CDR is not active for the flow."
        ::= { sfpsL4CPFlowEntry 17 }


-- SFPS MAC ADDRESS SUBSTITUTION TABLE

sfpsL4CPMACAddrSubTable     OBJECT-TYPE
        SYNTAX  SEQUENCE OF SfpsL4CPMACAddrSubEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "This table provides the ability to override the default
                 gateway for specific routes."
        ::= { sfpsL4CP 5 }

sfpsL4CPMACAddrSubEntry    OBJECT-TYPE
        SYNTAX  SfpsL4CPMACAddrSubEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "Each entry contains the MAC address substitution information
                 associated with a specific destination IP address."
        INDEX   { sfpsL4CPMACAddrSubDestIP } 
        ::= { sfpsL4CPMACAddrSubTable 1 }

SfpsL4CPMACAddrSubEntry ::=
        SEQUENCE {
                sfpsL4CPMACAddrSubDestIP     IpAddress,  
                sfpsL4CPMACAddrSubNextHopMAC PhysAddress,  
                sfpsL4CPMACAddrSubRefCount   INTEGER
         }  

sfpsL4CPMACAddrSubDestIP   OBJECT-TYPE
        SYNTAX  IpAddress  
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Destination IP address for this route"
        ::= { sfpsL4CPMACAddrSubEntry 1 }

sfpsL4CPMACAddrSubNextHopMAC   OBJECT-TYPE
        SYNTAX  PhysAddress
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The next-hop MAC address to use for this route."
        ::= { sfpsL4CPMACAddrSubEntry 2 }

sfpsL4CPMACAddrSubRefCount   OBJECT-TYPE
        SYNTAX  INTEGER(0..'7FFFFFFF'h)
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The number of flow table entries that reference this entry."
        ::= { sfpsL4CPMACAddrSubEntry 3 }


-- SFPS NETWORK ADDRESS SUBSTITUTION TABLE

sfpsL4CPNetAddrUserTable     OBJECT-TYPE
        SYNTAX  SEQUENCE OF SfpsL4CPNetAddrUserEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "This table associates user information with network 
                 addresses."
        ::= { sfpsL4CP 7 }

sfpsL4CPNetAddrUserEntry    OBJECT-TYPE
        SYNTAX  SfpsL4CPNetAddrUserEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "Each entry contains the user information
                 associated with a specific network address."
        INDEX   { sfpsL4CPNetAddrUserProtocol,
                  sfpsL4CPNetAddrUserNetAddr } 
        ::= { sfpsL4CPNetAddrUserTable 1 }

SfpsL4CPNetAddrUserEntry ::=
        SEQUENCE {
                sfpsL4CPNetAddrUserProtocol   INTEGER,  
                sfpsL4CPNetAddrUserNetAddr    DisplayString,  
                sfpsL4CPNetAddrUserLoginID    INTEGER,
                sfpsL4CPNetAddrUserUserID     INTEGER,
                sfpsL4CPNetAddrUserUserName   DisplayString
         }  

sfpsL4CPNetAddrUserProtocol   OBJECT-TYPE
        SYNTAX  INTEGER(0..'7FFFFFFF'h)  
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The network-layer protocol associated with this entry.  Values
                 correspond to the 'aoAddressTag' enumeration 
                 (see aoproperties.h)."
        ::= { sfpsL4CPNetAddrUserEntry 1 }

sfpsL4CPNetAddrUserNetAddr   OBJECT-TYPE
        SYNTAX  DisplayString
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The network-layer address associated with this entry."
        ::= { sfpsL4CPNetAddrUserEntry 2 }

sfpsL4CPNetAddrUserLoginID   OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The login ID from CSM's LoginOID.  Set to zero
                 if no user is logged into the address."
        ::= { sfpsL4CPNetAddrUserEntry 3 }

sfpsL4CPNetAddrUserUserID   OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The object ID from CSM's UserOID."
        ::= { sfpsL4CPNetAddrUserEntry 4 }

sfpsL4CPNetAddrUserUserName   OBJECT-TYPE
        SYNTAX  DisplayString
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The user name associated with this entry."
        ::= { sfpsL4CPNetAddrUserEntry 5 }



-- SFPS IP ROUTE TABLE

sfpsL4CPIPRouteTable     OBJECT-TYPE
        SYNTAX  SEQUENCE OF SfpsL4CPIPRouteEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "This table associates IP routes (subnets) with devices."
        ::= { sfpsL4CP 8 }

sfpsL4CPIPRouteEntry    OBJECT-TYPE
        SYNTAX  SfpsL4CPIPRouteEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "Each entry contains the IP route information
                 associated with a specific device."
        INDEX   { sfpsL4CPIPRouteSubnetMask,
                  sfpsL4CPIPRouteSubnet } 
        ::= { sfpsL4CPIPRouteTable 1 }

SfpsL4CPIPRouteEntry ::=
        SEQUENCE {
                sfpsL4CPIPRouteSubnetMask     IpAddress,  
                sfpsL4CPIPRouteSubnet         IpAddress,  
                sfpsL4CPIPRouteRouteID        INTEGER,
                sfpsL4CPIPRouteRouteSubsystem INTEGER,
                sfpsL4CPIPRouteDeviceID       INTEGER,
                sfpsL4CPIPRouteDeviceName     DisplayString,
                sfpsL4CPIPRouteMACAddress     SfpsAddress,
                sfpsL4CPIPRouteMetric         INTEGER,
                sfpsL4CPIPRouteCallable       INTEGER
         }  

sfpsL4CPIPRouteSubnetMask   OBJECT-TYPE
        SYNTAX  IpAddress  
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The subnet mask associated with this route." 
        ::= { sfpsL4CPIPRouteEntry 1 }

sfpsL4CPIPRouteSubnet   OBJECT-TYPE
        SYNTAX  IpAddress
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The destination subnet of this route."
        ::= { sfpsL4CPIPRouteEntry 2 }

sfpsL4CPIPRouteRouteID   OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The object ID from CSM's RouteOID."
        ::= { sfpsL4CPIPRouteEntry 3 }

sfpsL4CPIPRouteRouteSubsystem   OBJECT-TYPE
        SYNTAX  INTEGER { local(1),
                          remote(2) }
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Indicates type of device route."
        ::= { sfpsL4CPIPRouteEntry 4 }

sfpsL4CPIPRouteDeviceID   OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The object ID from CSM's DeviceOID."
        ::= { sfpsL4CPIPRouteEntry 5 }

sfpsL4CPIPRouteDeviceName   OBJECT-TYPE
        SYNTAX  DisplayString
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The device name for this route."
        ::= { sfpsL4CPIPRouteEntry 6 }

sfpsL4CPIPRouteMACAddress   OBJECT-TYPE
        SYNTAX  SfpsAddress
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The MAC address of the device for this route."
        ::= { sfpsL4CPIPRouteEntry 7 }

sfpsL4CPIPRouteMetric   OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The metric associated with this route."
        ::= { sfpsL4CPIPRouteEntry 8 }

sfpsL4CPIPRouteCallable   OBJECT-TYPE
        SYNTAX  INTEGER { yes(1),
                          no(2) }
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Indicates whether or not the device associated
                 with this route is callable for IP."
        ::= { sfpsL4CPIPRouteEntry 9 }



-- SFPS PORT TABLE

sfpsL4CPPortTable     OBJECT-TYPE
        SYNTAX  SEQUENCE OF SfpsL4CPPortEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "This table lists the attributes of an access servers ports."
        ::= { sfpsL4CP 9 }

sfpsL4CPPortEntry    OBJECT-TYPE
        SYNTAX  SfpsL4CPPortEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "Each entry contains information about
                 one of this access server's ports."
        INDEX   { sfpsL4CPPortNum } 
        ::= { sfpsL4CPPortTable 1 }

SfpsL4CPPortEntry ::=
        SEQUENCE {
                sfpsL4CPPortNum              INTEGER,  
                sfpsL4CPPortID               INTEGER,  
                sfpsL4CPPortApplyPolicyIn    INTEGER,
                sfpsL4CPPortApplyPolicyOut   INTEGER,
                sfpsL4CPPortDefaultUserID    INTEGER,
                sfpsL4CPPortDefaultUserName  DisplayString
         }  

sfpsL4CPPortNum   OBJECT-TYPE
        SYNTAX  INTEGER(0..'7FFFFFFF'h)  
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The logical port number of this port." 
        ::= { sfpsL4CPPortEntry 1 }

sfpsL4CPPortID   OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The last four octets of CSM's PortOID for this port."
        ::= { sfpsL4CPPortEntry 2 }

sfpsL4CPPortApplyPolicyIn   OBJECT-TYPE
        SYNTAX  INTEGER { yes(1),
                          no(2) }
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Indicates whether or not access policies
                 are to be applied to packets arriving at this port."
        ::= { sfpsL4CPPortEntry 3 }

sfpsL4CPPortApplyPolicyOut   OBJECT-TYPE
        SYNTAX  INTEGER { yes(1),
                          no(2) }
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Indicates whether or not access policies
                 are to be applied to packets sent out this port."
        ::= { sfpsL4CPPortEntry 4 }

sfpsL4CPPortDefaultUserID   OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The last four octets of CSM's UserOID for the
                 default userid for this port."
        ::= { sfpsL4CPPortEntry 5 }

sfpsL4CPPortDefaultUserName   OBJECT-TYPE
        SYNTAX  DisplayString
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The user name assigned to MAC addresses
                 discovered on this port."
        ::= { sfpsL4CPPortEntry 6 }




-- SFPS Callable Device Table

sfpsL4CPCallableDeviceTable     OBJECT-TYPE
        SYNTAX  SEQUENCE OF SfpsL4CPCallableDeviceEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "This table lists the attributes of a callable device."
        ::= { sfpsL4CP 11 }

sfpsL4CPCallableDeviceEntry    OBJECT-TYPE
        SYNTAX  SfpsL4CPCallableDeviceEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "Each entry contains information about
                 one of this access server's ports."
        INDEX   { sfpsL4CPCallableDeviceDeviceID } 
        ::= { sfpsL4CPCallableDeviceTable 1 }

SfpsL4CPCallableDeviceEntry ::=
        SEQUENCE {
                sfpsL4CPCallableDeviceDeviceID         INTEGER,  
                sfpsL4CPCallableDeviceDeviceName       DisplayString,  
                sfpsL4CPCallableDeviceDefaultUserName  DisplayString
         }  

sfpsL4CPCallableDeviceDeviceID   OBJECT-TYPE
        SYNTAX  INTEGER(0..'7FFFFFFF'h)  
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The last four octets of CSM's DeviceOID for this
                 callable device."
        ::= { sfpsL4CPCallableDeviceEntry 1 }

sfpsL4CPCallableDeviceDeviceName   OBJECT-TYPE
        SYNTAX  DisplayString
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The default device name for this callable device."
        ::= { sfpsL4CPCallableDeviceEntry 2 }

sfpsL4CPCallableDeviceDefaultUserName   OBJECT-TYPE
        SYNTAX  DisplayString
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The default user name for this callable device."
        ::= { sfpsL4CPCallableDeviceEntry 3 }




-- SFPS Layer 4 Call Detail Recording Active Flow Table

sfpsL4CDRActiveFlowTable     OBJECT-TYPE
        SYNTAX  SEQUENCE OF SfpsL4CDRActiveFlowEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "This table lists the currently active flows that have
                 Call Detail Recording enabled."
        ::= { sfpsL4CDR 4 }

sfpsL4CDRActiveFlowEntry    OBJECT-TYPE
        SYNTAX  SfpsL4CDRActiveFlowEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "Each entry contains information about
                 one flow that has CDR enabled."
        INDEX   { sfpsL4CDRActiveFlowFlowID } 
        ::= { sfpsL4CDRActiveFlowTable 1 }

SfpsL4CDRActiveFlowEntry ::=
        SEQUENCE {
                sfpsL4CDRActiveFlowFlowID               INTEGER,  
                sfpsL4CDRActiveFlowSubProtocol          INTEGER,  
                sfpsL4CDRActiveFlowEtherType            INTEGER,
                sfpsL4CDRActiveFlowSourceUser           DisplayString,
                sfpsL4CDRActiveFlowSourceMACAddr        DisplayString,
                sfpsL4CDRActiveFlowSourceNetAddr        DisplayString,
                sfpsL4CDRActiveFlowSourceProtocolPort   INTEGER,
                sfpsL4CDRActiveFlowSourcePPRangeEnabled INTEGER,
                sfpsL4CDRActiveFlowSourceConnNumber     INTEGER,
                sfpsL4CDRActiveFlowDestUser             DisplayString,
                sfpsL4CDRActiveFlowDestMACAddr          DisplayString,
                sfpsL4CDRActiveFlowDestNetAddr          DisplayString,
                sfpsL4CDRActiveFlowDestProtocolPort     INTEGER,
                sfpsL4CDRActiveFlowDestPPRangeEnabled   INTEGER,
                sfpsL4CDRActiveFlowDestConnNumber       INTEGER,
                sfpsL4CDRActiveFlowStartTime            TimeTicks,
                sfpsL4CDRActiveFlowLastPktTime          TimeTicks,
                sfpsL4CDRActiveFlowEndTime              TimeTicks,
                sfpsL4CDRActiveFlowInOctets             Counter,
                sfpsL4CDRActiveFlowOutOctets            Counter,
                sfpsL4CDRActiveFlowInPkts               Counter,
                sfpsL4CDRActiveFlowOutPkts              Counter,
                sfpsL4CDRActiveFlowDemandAccessConnMade INTEGER,
                sfpsL4CDRActiveFlowFlowRecordState      INTEGER
         }  

sfpsL4CDRActiveFlowFlowID   OBJECT-TYPE
        SYNTAX  INTEGER(0..'7FFFFFFF'h)  
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Flow ID for this flow."
        ::= { sfpsL4CDRActiveFlowEntry 1 }

sfpsL4CDRActiveFlowSubProtocol   OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "If this is a Layer 4 flow, this value identifies the Layer
                 4 protocol (for IP, this value corresponds to the 'Protocol'
                 field as described in the 'Assigned Numbers' RFC).  If this
                 is a Layer 3 flow, this value is zero."
        ::= { sfpsL4CDRActiveFlowEntry 2 }

sfpsL4CDRActiveFlowEtherType   OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The Layer 3 protocol represented by this entry.  Values
                 correspond to the 'Ether Type' field as described in the
                 Assigned Numbers RFC."
        ::= { sfpsL4CDRActiveFlowEntry 3 }

sfpsL4CDRActiveFlowSourceUser   OBJECT-TYPE
        SYNTAX  DisplayString
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The user name associated with the source of the flow."
        ::= { sfpsL4CDRActiveFlowEntry 4 }

sfpsL4CDRActiveFlowSourceMACAddr   OBJECT-TYPE
        SYNTAX  DisplayString
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The MAC address associated with the source of the flow."
        ::= { sfpsL4CDRActiveFlowEntry 5 }

sfpsL4CDRActiveFlowSourceNetAddr   OBJECT-TYPE
        SYNTAX  DisplayString
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The Layer 3 address associated with the source of the flow."
        ::= { sfpsL4CDRActiveFlowEntry 6 }

sfpsL4CDRActiveFlowSourceProtocolPort   OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "If this is a Layer 4 flow, this value indicates the
                 protocol port number of the source of the flow.
                 Otherwise, this field is zero."
        ::= { sfpsL4CDRActiveFlowEntry 7 }

sfpsL4CDRActiveFlowSourcePPRangeEnabled   OBJECT-TYPE
        SYNTAX  INTEGER { yes(1),
                          no(2) }
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Indicates whether or not any source protocol port
                 number greater than 1023 is considered to match the source
                 protocol port with which this flow was created."
        ::= { sfpsL4CDRActiveFlowEntry 8 }

sfpsL4CDRActiveFlowSourceConnNumber   OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The source connection number."
        ::= { sfpsL4CDRActiveFlowEntry 9 }

sfpsL4CDRActiveFlowDestUser   OBJECT-TYPE
        SYNTAX  DisplayString
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The user name associated with the destination of the flow."
        ::= { sfpsL4CDRActiveFlowEntry 10 }

sfpsL4CDRActiveFlowDestMACAddr   OBJECT-TYPE
        SYNTAX  DisplayString
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The MAC address associated with the destination of the flow."
        ::= { sfpsL4CDRActiveFlowEntry 11 }

sfpsL4CDRActiveFlowDestNetAddr   OBJECT-TYPE
        SYNTAX  DisplayString
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The Layer 3 address associated with the destination of the flow."
        ::= { sfpsL4CDRActiveFlowEntry 12 }

sfpsL4CDRActiveFlowDestProtocolPort   OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "If this is a Layer 4 flow, this value indicates the
                 protocol port number of the destination of the flow.
                 Otherwise, this field is zero."
        ::= { sfpsL4CDRActiveFlowEntry 13 }

sfpsL4CDRActiveFlowDestPPRangeEnabled   OBJECT-TYPE
        SYNTAX  INTEGER { yes(1),
                          no(2) }
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Indicates whether or not any destination protocol port
                 number greater than 1023 is considered to match the destination
                 protocol port with which this flow was created."
        ::= { sfpsL4CDRActiveFlowEntry 14 }

sfpsL4CDRActiveFlowDestConnNumber   OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The destination connection number."
        ::= { sfpsL4CDRActiveFlowEntry 15 }

sfpsL4CDRActiveFlowStartTime   OBJECT-TYPE
        SYNTAX  TimeTicks
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The time elapsed since this flow was created."
        ::= { sfpsL4CDRActiveFlowEntry 16 }

sfpsL4CDRActiveFlowLastPktTime   OBJECT-TYPE
        SYNTAX  TimeTicks
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The time elapsed since the most recent packet was sent on
                 this flow."
        ::= { sfpsL4CDRActiveFlowEntry 17 }

sfpsL4CDRActiveFlowEndTime   OBJECT-TYPE
        SYNTAX  TimeTicks
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The time elapsed since this flow was terminated.  This
                 field is not meaningful for active flows."
        ::= { sfpsL4CDRActiveFlowEntry 18 }

sfpsL4CDRActiveFlowInOctets   OBJECT-TYPE
        SYNTAX  Counter
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The number of octets that have been sent from the
                 destination to the source."
        ::= { sfpsL4CDRActiveFlowEntry 19 }

sfpsL4CDRActiveFlowOutOctets   OBJECT-TYPE
        SYNTAX  Counter
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The number of octets that have been sent from the
                 source to the destination."
        ::= { sfpsL4CDRActiveFlowEntry 20 }

sfpsL4CDRActiveFlowInPkts   OBJECT-TYPE
        SYNTAX  Counter
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The number of packets that have been sent from the
                 destination to the source."
        ::= { sfpsL4CDRActiveFlowEntry 21 }

sfpsL4CDRActiveFlowOutPkts   OBJECT-TYPE
        SYNTAX  Counter
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The number of packets that have been sent from the
                 source to the destination."
        ::= { sfpsL4CDRActiveFlowEntry 22 }

sfpsL4CDRActiveFlowDemandAccessConnMade   OBJECT-TYPE
        SYNTAX  INTEGER { yes(1),
                          no(2) }
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Indicates whether or not a demand access
                 connection had to be made for this flow."
        ::= { sfpsL4CDRActiveFlowEntry 23 }

sfpsL4CDRActiveFlowFlowRecordState   OBJECT-TYPE
        SYNTAX  INTEGER { initialized(1),
                          active(2),
                          terminated(3),
                          invalid(4) }
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Indicates the current state of the flow record."
        ::= { sfpsL4CDRActiveFlowEntry 24 }



-- SFPS Layer 4 Call Detail Recording Terminated Flow Table

sfpsL4CDRTermedFlowTable     OBJECT-TYPE
        SYNTAX  SEQUENCE OF SfpsL4CDRTermedFlowEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "This table lists the terminated flows that had
                 Call Detail Recording enabled."
        ::= { sfpsL4CDR 5 }

sfpsL4CDRTermedFlowEntry    OBJECT-TYPE
        SYNTAX  SfpsL4CDRTermedFlowEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "Each entry contains information about
                 one flow that had CDR enabled."
        INDEX   { sfpsL4CDRTermedFlowFlowID } 
        ::= { sfpsL4CDRTermedFlowTable 1 }

SfpsL4CDRTermedFlowEntry ::=
        SEQUENCE {
                sfpsL4CDRTermedFlowFlowID               INTEGER,  
                sfpsL4CDRTermedFlowSubProtocol          INTEGER,  
                sfpsL4CDRTermedFlowEtherType            INTEGER,
                sfpsL4CDRTermedFlowSourceUser           DisplayString,
                sfpsL4CDRTermedFlowSourceMACAddr        DisplayString,
                sfpsL4CDRTermedFlowSourceNetAddr        DisplayString,
                sfpsL4CDRTermedFlowSourceProtocolPort   INTEGER,
                sfpsL4CDRTermedFlowSourcePPRangeEnabled INTEGER,
                sfpsL4CDRTermedFlowSourceConnNumber     INTEGER,
                sfpsL4CDRTermedFlowDestUser             DisplayString,
                sfpsL4CDRTermedFlowDestMACAddr          DisplayString,
                sfpsL4CDRTermedFlowDestNetAddr          DisplayString,
                sfpsL4CDRTermedFlowDestProtocolPort     INTEGER,
                sfpsL4CDRTermedFlowDestPPRangeEnabled   INTEGER,
                sfpsL4CDRTermedFlowDestConnNumber       INTEGER,
                sfpsL4CDRTermedFlowStartTime            TimeTicks,
                sfpsL4CDRTermedFlowLastPktTime          TimeTicks,
                sfpsL4CDRTermedFlowEndTime              TimeTicks,
                sfpsL4CDRTermedFlowInOctets             Counter,
                sfpsL4CDRTermedFlowOutOctets            Counter,
                sfpsL4CDRTermedFlowInPkts               Counter,
                sfpsL4CDRTermedFlowOutPkts              Counter,
                sfpsL4CDRTermedFlowDemandAccessConnMade INTEGER,
                sfpsL4CDRTermedFlowFlowRecordState      INTEGER
         }  

sfpsL4CDRTermedFlowFlowID   OBJECT-TYPE
        SYNTAX  INTEGER(0..'7FFFFFFF'h)  
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Flow ID for this flow."
        ::= { sfpsL4CDRTermedFlowEntry 1 }

sfpsL4CDRTermedFlowSubProtocol   OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "If this is a Layer 4 flow, this value identifies the Layer
                 4 protocol (for IP, this value corresponds to the 'Protocol'
                 field as described in the 'Assigned Numbers' RFC).  If this
                 is a Layer 3 flow, this value is zero."
        ::= { sfpsL4CDRTermedFlowEntry 2 }

sfpsL4CDRTermedFlowEtherType   OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The Layer 3 protocol represented by this entry.  Values
                 correspond to the 'Ether Type' field as described in the
                 Assigned Numbers RFC."
        ::= { sfpsL4CDRTermedFlowEntry 3 }

sfpsL4CDRTermedFlowSourceUser   OBJECT-TYPE
        SYNTAX  DisplayString
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The user name associated with the source of the flow."
        ::= { sfpsL4CDRTermedFlowEntry 4 }

sfpsL4CDRTermedFlowSourceMACAddr   OBJECT-TYPE
        SYNTAX  DisplayString
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The MAC address associated with the source of the flow."
        ::= { sfpsL4CDRTermedFlowEntry 5 }

sfpsL4CDRTermedFlowSourceNetAddr   OBJECT-TYPE
        SYNTAX  DisplayString
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The Layer 3 address associated with the source of the flow."
        ::= { sfpsL4CDRTermedFlowEntry 6 }

sfpsL4CDRTermedFlowSourceProtocolPort   OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "If this is a Layer 4 flow, this value indicates the
                 protocol port number of the source of the flow.
                 Otherwise, this field is zero."
        ::= { sfpsL4CDRTermedFlowEntry 7 }

sfpsL4CDRTermedFlowSourcePPRangeEnabled   OBJECT-TYPE
        SYNTAX  INTEGER { yes(1),
                          no(2) }
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Indicates whether or not any source protocol port
                 number greater than 1023 is considered to match the source
                 protocol port with which this flow was created."
        ::= { sfpsL4CDRTermedFlowEntry 8 }

sfpsL4CDRTermedFlowSourceConnNumber   OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The source connection number."
        ::= { sfpsL4CDRTermedFlowEntry 9 }

sfpsL4CDRTermedFlowDestUser   OBJECT-TYPE
        SYNTAX  DisplayString
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The user name associated with the destination of the flow."
        ::= { sfpsL4CDRTermedFlowEntry 10 }

sfpsL4CDRTermedFlowDestMACAddr   OBJECT-TYPE
        SYNTAX  DisplayString
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The MAC address associated with the destination of the flow."
        ::= { sfpsL4CDRTermedFlowEntry 11 }

sfpsL4CDRTermedFlowDestNetAddr   OBJECT-TYPE
        SYNTAX  DisplayString
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The Layer 3 address associated with the destination of the flow."
        ::= { sfpsL4CDRTermedFlowEntry 12 }

sfpsL4CDRTermedFlowDestProtocolPort   OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "If this is a Layer 4 flow, this value indicates the
                 protocol port number of the destination of the flow.
                 Otherwise, this field is zero."
        ::= { sfpsL4CDRTermedFlowEntry 13 }

sfpsL4CDRTermedFlowDestPPRangeEnabled   OBJECT-TYPE
        SYNTAX  INTEGER { yes(1),
                          no(2) }
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Indicates whether or not any destination protocol port
                 number greater than 1023 is considered to match the destination
                 protocol port with which this flow was created."
        ::= { sfpsL4CDRTermedFlowEntry 14 }

sfpsL4CDRTermedFlowDestConnNumber   OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The destination connection number."
        ::= { sfpsL4CDRTermedFlowEntry 15 }

sfpsL4CDRTermedFlowStartTime   OBJECT-TYPE
        SYNTAX  TimeTicks
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The time elapsed since this flow was created."
        ::= { sfpsL4CDRTermedFlowEntry 16 }

sfpsL4CDRTermedFlowLastPktTime   OBJECT-TYPE
        SYNTAX  TimeTicks
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The time elapsed since the most recent packet was sent on
                 this flow."
        ::= { sfpsL4CDRTermedFlowEntry 17 }

sfpsL4CDRTermedFlowEndTime   OBJECT-TYPE
        SYNTAX  TimeTicks
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The time elapsed since this flow was terminated."
        ::= { sfpsL4CDRTermedFlowEntry 18 }

sfpsL4CDRTermedFlowInOctets   OBJECT-TYPE
        SYNTAX  Counter
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The number of octets that have been sent from the
                 destination to the source."
        ::= { sfpsL4CDRTermedFlowEntry 19 }

sfpsL4CDRTermedFlowOutOctets   OBJECT-TYPE
        SYNTAX  Counter
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The number of octets that have been sent from the
                 source to the destination."
        ::= { sfpsL4CDRTermedFlowEntry 20 }

sfpsL4CDRTermedFlowInPkts   OBJECT-TYPE
        SYNTAX  Counter
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The number of packets that have been sent from the
                 destination to the source."
        ::= { sfpsL4CDRTermedFlowEntry 21 }

sfpsL4CDRTermedFlowOutPkts   OBJECT-TYPE
        SYNTAX  Counter
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The number of packets that have been sent from the
                 source to the destination."
        ::= { sfpsL4CDRTermedFlowEntry 22 }

sfpsL4CDRTermedFlowDemandAccessConnMade   OBJECT-TYPE
        SYNTAX  INTEGER { yes(1),
                          no(2) }
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Indicates whether or not a demand access
                 connection had to be made for this flow."
        ::= { sfpsL4CDRTermedFlowEntry 23 }

sfpsL4CDRTermedFlowFlowRecordState   OBJECT-TYPE
        SYNTAX  INTEGER { initialized(1),
                          active(2),
                          terminated(3),
                          invalid(4) }
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Indicates the current state of the flow record."
        ::= { sfpsL4CDRTermedFlowEntry 24 }



-- SFPS Layer 4 Call Detail Recording Flow Index Table

sfpsL4CDRFlowIndexTable     OBJECT-TYPE
        SYNTAX  SEQUENCE OF SfpsL4CDRFlowIndexEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "This table lists the current flows that have
                 Call Detail Recording enabled."
        ::= { sfpsL4CDR 6 }

sfpsL4CDRFlowIndexEntry    OBJECT-TYPE
        SYNTAX  SfpsL4CDRFlowIndexEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "Each entry contains information about
                 one flow that has CDR enabled."
        INDEX   { sfpsL4CDRFlowIndexFlowID } 
        ::= { sfpsL4CDRFlowIndexTable 1 }

SfpsL4CDRFlowIndexEntry ::=
        SEQUENCE {
                sfpsL4CDRFlowIndexFlowID               INTEGER,  
                sfpsL4CDRFlowIndexSFPSFlowTblIndex     INTEGER,  
                sfpsL4CDRFlowIndexSFlowStatsPtr        INTEGER,
                sfpsL4CDRFlowIndexStaticFlowInfoPtr    INTEGER,
                sfpsL4CDRFlowIndexFlowTblEntryPtr      INTEGER,
                sfpsL4CDRFlowIndexFlowState            INTEGER
         }  

sfpsL4CDRFlowIndexFlowID   OBJECT-TYPE
        SYNTAX  INTEGER(0..'7FFFFFFF'h)  
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Flow ID for this flow."
        ::= { sfpsL4CDRFlowIndexEntry 1 }

sfpsL4CDRFlowIndexSFPSFlowTblIndex   OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Index of the SFPS Flow Table entry (1-based) that
                 corresponds to this flow."
        ::= { sfpsL4CDRFlowIndexEntry 2 }

sfpsL4CDRFlowIndexSFlowStatsPtr   OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Pointer to the SFlowStats object for this flow."
        ::= { sfpsL4CDRFlowIndexEntry 3 }

sfpsL4CDRFlowIndexStaticFlowInfoPtr   OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Pointer to the L4CDRStaticFlowInfo object for this flow."
        ::= { sfpsL4CDRFlowIndexEntry 4 }

sfpsL4CDRFlowIndexFlowTblEntryPtr   OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The flow table entry pointer for this flow."
        ::= { sfpsL4CDRFlowIndexEntry 5 }

sfpsL4CDRFlowIndexFlowState   OBJECT-TYPE
        SYNTAX  INTEGER { initialized(1),
                          active(2),
                          terminated(3),
                          invalid(4) }
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Indicates the current state of the flow index record."
        ::= { sfpsL4CDRFlowIndexEntry 6 }

END