CTRON-SFPS-MCAST-MIB device MIB details by Enterasys Networks Inc

CTRON-SFPS-MCAST-MIB file content

The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.

Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.

Use ActiveXperts Network Monitor 2024 to import vendor-specific MIB files, inclusing CTRON-SFPS-MCAST-MIB.

Vendor:	Enterasys Networks Inc
Mib:	CTRON-SFPS-MCAST-MIB  [download]  [view objects]
Tool:	ActiveXperts Network Monitor 2024 [download]    (ships with advanced SNMP/MIB tools)

CTRON-SFPS-MCAST-MIB DEFINITIONS ::= BEGIN

--  sfps-mcast-mib.txt
--  Revision: 0.0.05
--
--  Cabletron Systems, Inc.
--  35 Industrial Way, P.O. Box 5005
--  Rochester, NH 03867-0505
--  (603) 332-9400
--  support@ctron.com
--
--  This module provides authoritative definitions for Cabletron's
--  enterprise specific Fast Packet Switching Services API MIB.
--
--  This module will be extended, as required.
--
--
--  Cabletron Systems reserves the right to make changes in
--  specification and other information contained in this document
--  without prior notice.  The reader should consult Cabletron Systems
--  to determine whether any such changes have been made.
--
--  In no event shall Cabletron Systems be liable for any incidental,
--  indirect, special, or consequential damages whatsoever (including
--  but not limited to lost profits) arising out of or related to this
--  document or the information contained in it, even if Cabletron
--  Systems has been advised of, known, or should have known, the
--  possibility of such damages.
--
--  Cabletron grants vendors, end-users, and other interested parties
--  a non-exclusive license to use this Specification in connection
--  with the management of Cabletron products.
--  Copyright October 93 Cabletron Systems
--

IMPORTS
      OBJECT-TYPE
                FROM RFC-1212
      DisplayString
                FROM RFC1213-MIB
--      enterprises,
      IpAddress, 
      TimeTicks
                FROM RFC1155-SMI

--  These Objects are defined in the file sfps-inc.mib.txt.0.0.2
        sfpsMcastCnx, sfpsMcastCnxAPI, sfpsMcastIPRouter,
        sfpsMcastIPReceiverInfoBase, sfpsMcastIPRIBApi, sfpsMcastConfigApi,
        sfpsMcastIPSenderInfoBase, sfpsMcastIPSIBApi

                        FROM CTRON-SFPS-INCLUDE-MIB;

--  Textual Conventions

--SfpsSwitchInstance ::= OCTET STRING (SIZE(4))
--  this will map to chassis.module index value
 
--SfpsSwitchPort ::= INTEGER
--  this will map to chassis.module.portgroup.portsubgroup.port index value
 
SfpsAddress ::= OCTET STRING (SIZE (6))
--  this will map to a MAC address
  
--HexInteger ::= INTEGER
--  display this integer in hex format



--  SFPS Multicast Connection Table

sfpsMcastCnxDestination   OBJECT-TYPE
        SYNTAX  SfpsAddress
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The multicast destination MAC address."
        ::= { sfpsMcastCnx 1 }

sfpsMcastCnxSource   OBJECT-TYPE
        SYNTAX  SfpsAddress
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The source MAC address."
        ::= { sfpsMcastCnx 2 }

sfpsMcastCnxSenderSw   OBJECT-TYPE
        SYNTAX  SfpsAddress
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The MAC address of the switch that the sender is on."
        ::= { sfpsMcastCnx 3 }

sfpsMcastCnxInPort   OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Local upstream port for flow."
        ::= { sfpsMcastCnx 4 }

sfpsMcastCnxOutPorts   OBJECT-TYPE
        SYNTAX  DisplayString
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Local downstream port(s) for flow."
        ::= { sfpsMcastCnx 5 }

sfpsMcastCnxGroup   OBJECT-TYPE
        SYNTAX  IpAddress
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Net layer ID of multicast group"
        ::= { sfpsMcastCnx 6 }

sfpsMcastCnxTTL   OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  deprecated
        DESCRIPTION
                "Scope vlaue for this flow"
        ::= { sfpsMcastCnx 7 }

sfpsMcastCnxAge   OBJECT-TYPE
        SYNTAX  TimeTicks
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Age of local connection"
        ::= { sfpsMcastCnx 8 }

sfpsMcastCnxStatus   OBJECT-TYPE
        SYNTAX  INTEGER {
                filter(1),
                inActive(2),
                remote(4),
                netFilter(5),
                dying(8),
                static(16),
                staticFilter(17),
                staticInactive(18)
                }
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Local connection status (bitwise)"
        ::= { sfpsMcastCnx 9 }

sfpsMcastCnxNextSw   OBJECT-TYPE
        SYNTAX  SfpsAddress
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The MAC address of the next switch."
        ::= { sfpsMcastCnx 10 }


--  Multicast Cnx API

sfpsMcastCnxAPIDestination   OBJECT-TYPE
        SYNTAX  SfpsAddress
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Multicast destination MAC"
        ::= { sfpsMcastCnxAPI 1 }

sfpsMcastCnxAPISource   OBJECT-TYPE
        SYNTAX  SfpsAddress
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Multicast sender MAC"
        ::= { sfpsMcastCnxAPI 2 }

sfpsMcastCnxAPISenderSw   OBJECT-TYPE
        SYNTAX  SfpsAddress
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Mac of switch where sender is"
        ::= { sfpsMcastCnxAPI 3 }

sfpsMcastCnxAPIInPort   OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Local upstream port for flow"
        ::= { sfpsMcastCnxAPI 4 }

sfpsMcastCnxAPIOutPort   OBJECT-TYPE
        SYNTAX  DisplayString
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Local downstream port(s) for flow"
        ::= { sfpsMcastCnxAPI 5 }

sfpsMcastCnxAPIGroup   OBJECT-TYPE
        SYNTAX  IpAddress
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Net layer ID of multicast group"
        ::= { sfpsMcastCnxAPI 6 }

sfpsMcastCnxAPITTL   OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  deprecated
        DESCRIPTION
                "Scope value for this flow"
        ::= { sfpsMcastCnxAPI 7 }

sfpsMcastCnxAPIVerb   OBJECT-TYPE
        SYNTAX  INTEGER {
                other(1),
                addFilter(2),
                addPort(3),
                delPort(4),
                addCnx(5),
                delCnx(6)
                }
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Action to take"
        ::= { sfpsMcastCnxAPI 8 }

sfpsMcastCnxAPIFilters   OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Count of local multicast filters"
        ::= { sfpsMcastCnxAPI 9 }

sfpsMcastCnxAPINonFilters   OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Count of local multicast connections"
        ::= { sfpsMcastCnxAPI 10 }

-- SFPS Multicast IP Router Table

sfpsMcastIPRouterTable     OBJECT-TYPE
        SYNTAX  SEQUENCE OF SfpsMcastIPRouterEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION 
                ""
       ::= { sfpsMcastIPRouter 1 }

sfpsMcastIPRouterEntry    OBJECT-TYPE
        SYNTAX  SfpsMcastIPRouterEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
               ""
        INDEX   { sfpsMcastIPRouterIfNum  }
       ::= { sfpsMcastIPRouterTable 1 }

SfpsMcastIPRouterEntry
    ::=         SEQUENCE {
                sfpsMcastIPRouterIfNum          INTEGER,
                sfpsMcastIPRouterVlanId         INTEGER,
                sfpsMcastIPRouterRouterIP       IpAddress,
                sfpsMcastIPRouterTTL            INTEGER
        }

sfpsMcastIPRouterIfNum   OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Port where multicast router is attached"
        ::= { sfpsMcastIPRouterEntry 1 }

sfpsMcastIPRouterVlanId   OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                ""
        ::= { sfpsMcastIPRouterEntry 2 }

sfpsMcastIPRouterRouterIP   OBJECT-TYPE
        SYNTAX  IpAddress
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "IP address of attached multicast router"
        ::= { sfpsMcastIPRouterEntry 3 }

sfpsMcastIPRouterTTL   OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  deprecated
        DESCRIPTION
                "Scope vlaue for this router"
        ::= { sfpsMcastIPRouterEntry 4 }

-- SFPS Multicast IP Router API


sfpsMcastIPRouterAPIVerb   OBJECT-TYPE
        SYNTAX  INTEGER {
                other(1),
                portMap(2),
                portUnmap(3)
                }
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "Action to take"
        ::= { sfpsMcastIPRouter 2 }

sfpsMcastIPRouterAPIIFNum   OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "Port where multicast router is attached"
        ::= { sfpsMcastIPRouter 3 }

sfpsMcastIPRouterAPIRouterIP   OBJECT-TYPE
        SYNTAX  IpAddress
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "IP address of attached multicast router"
        ::= { sfpsMcastIPRouter 4 }

sfpsMcastIPRouterAPITTLScope   OBJECT-TYPE
        SYNTAX  INTEGER {
                subnet(1),
                vacinity(4),
                site(16),
                region(64),
                world(128),
                worldLimited(192),
                unrestricted(255)
        }
        ACCESS  read-write
        STATUS  deprecated
        DESCRIPTION
                "Scope value for this router"
        ::= { sfpsMcastIPRouter 5 }

sfpsMcastIPRouterAPIVlanId   OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                ""
        ::= { sfpsMcastIPRouter 6 }


--  SFPS Multicast IP Receiver Information Base 

sfpsMcastIPRIBTable     OBJECT-TYPE
        SYNTAX  SEQUENCE OF SfpsMcastIPRIBEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION 
                ""
       ::= { sfpsMcastIPReceiverInfoBase 1 }

sfpsMcastIPRIBEntry    OBJECT-TYPE
        SYNTAX  SfpsMcastIPRIBEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
               ""
        INDEX   { sfpsMcastIPRIBGroup }
       ::= { sfpsMcastIPRIBTable 1 }

SfpsMcastIPRIBEntry
    ::= SEQUENCE {
                sfpsMcastIPRIBGroup        IpAddress,
                sfpsMcastIPRIBOrigin       INTEGER,
                sfpsMcastIPRIBInclusion    INTEGER,
                sfpsMcastIPRIBRcvPorts     OCTET STRING,
                sfpsMcastIPRIBAge          INTEGER
        }

sfpsMcastIPRIBGroup   OBJECT-TYPE
        SYNTAX  IpAddress
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                ""
        ::= { sfpsMcastIPRIBEntry 1 }

sfpsMcastIPRIBOrigin   OBJECT-TYPE
        SYNTAX  INTEGER {
                other(1),
                local(2),
                router(3),
                igmp(4),
                netMgt(5)
                }
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Origin"
        ::= { sfpsMcastIPRIBEntry 2 }

sfpsMcastIPRIBInclusion   OBJECT-TYPE
        SYNTAX  INTEGER {
                include(1),
                exclude(2)
                }
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                ""
        ::= { sfpsMcastIPRIBEntry 3 }

sfpsMcastIPRIBRcvPorts   OBJECT-TYPE
        SYNTAX  OCTET STRING
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Mask Object string"
        ::= { sfpsMcastIPRIBEntry 4 }

sfpsMcastIPRIBAge   OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "CF time ticks"
        ::= { sfpsMcastIPRIBEntry 5 }

--  SFPS Multicast IP Receiver Information Base API

sfpsMcastIPRIBApiGroup   OBJECT-TYPE
        SYNTAX  IpAddress
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "CF IP address IP multicast group address"
        ::= { sfpsMcastIPRIBApi 1 }

sfpsMcastIPRIBApiPort   OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Port number, -1 means all ports"
        ::= { sfpsMcastIPRIBApi 2 }

sfpsMcastIPRIBApiVerb   OBJECT-TYPE
        SYNTAX  INTEGER {
                includePort(1),
                undoInclude(2),
                excludePort(3),
                undoExclude(4)
                }
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Action to take"
        ::= { sfpsMcastIPRIBApi 3 }

--  SFPS Multicast Configuration API

sfpsMcastConfigApiSenderTableSize   OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "This is the number of entries that are allocated in the 
                 multicast connection table at startup.  Changing the
                 value will not take effect until blade is reset.
                 Values can be set between 0 and 2048."
        ::= { sfpsMcastConfigApi 1 }

sfpsMcastConfigApiMaxNonFilters   OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "This number is currently not used.  Its future purpose
                 may be to control the number of multi-outport connections
                 in use.  Values can be set between 0 and 2048."
        ::= { sfpsMcastConfigApi 2 }

sfpsMcastConfigApiRDRetryBuffs   OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "This number determines the number of packet objects that 
                 will be allocated by the reliable control packet transport
                 agent.  The packet object does not allocate space for the
                 packet, it just manages the packet delivery machine.
                 Each increment of this oid allocates space for 128
                 packet management objects which are 82 bytes in size.
                 Therefore each increment allocates about 10k of memory. 
                 Value will not take effect until blade is reset."
        ::= { sfpsMcastConfigApi 3 }

sfpsMcastConfigApiRDPktBuffs   OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "This number determines the number of packet buffers that 
                 will be allocated by the reliable control packet transport
                 agent.  Each increment of this oid allocates space for 128
                 packets which are 512 bytes in size.
                 Therefore each increment allocates about 65k of memory. 
                 Value will not take effect until blade is reset."
        ::= { sfpsMcastConfigApi 4 }

sfpsMcastConfigApiPendingMaps   OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "This is the number of delayed connection mappings that
                 will be maintained while waiting for topology changes
                 to be propagated or while waiting for interswitch
                 resolve.  The effect of this setting is most evident
                 when a link or switch is lost thru which may multicast
                 connections were passing.  An attempt to reconnect is made
                 after the delay specified in MC_CONFIG_API_REMAP_DELAY.  
                 Only the number of MC_CONFIG_API_PENDING_MAPS will be 
                 deferred. If you lose 100 connections and this number is
                 set to 20,  at best you'll reconnect 20 streams after the
                 delay.  The rest of the connections will be reestablished 
                 after the receivers respond to sender announcements which 
                 happen every MC_CONFIG_API_REFRESH_INTERVAL interval.
                 Value will not take effect until blade is reset."
        ::= { sfpsMcastConfigApi 5 }

sfpsMcastConfigApiSndrAgeOut   OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "This is the interval in seconds that the age timer
                 runs.  It is used to determine if a sender is still 
                 sending.  After one age out interval, the sender is
                 placed in a dying state and the local switch starts to
                 listen for traffic from that sender on a specific
                 destination.  If any traffic is received, the sender
                 if placed back in a non-dying state.  If no traffic
                 is seen before the second age interval, the sender is
                 considered dead and the corresponding connection tree
                 for that da/sa connection is removed throughout the
                 domain. Value will not take effect until blade is reset."
        ::= { sfpsMcastConfigApi 6 }

sfpsMcastConfigApiRefreshInterval   OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "This is the interval at which sender announcements will be
                transmitted by the switch that the sender is locally 
                attached.  All sender refreshes will occur within 12 seconds.
                If this number is set to 60, 1/2 of the senders will
                be announced every 60 seconds.  If this number is 30,
                1/4 of the senders will be announced every 30 seconds.
                If the number of senders grows, the refresh interval
                may have to be adjusted shorter.  The fine tuning is
                to determine which is better, fewer-bigger announcements,
                or more-smaller announcements.
                Value will not take effect until blade is reset."
        ::= { sfpsMcastConfigApi 7 }

sfpsMcastConfigApiSndersPerAncmt   OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "This is the number of sender announcements that will be
                 made before the thread is released.
                 Value will not take effect until blade is reset."
        ::= { sfpsMcastConfigApi 8 }

sfpsMcastConfigApiDebugLog   OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "This value enables or disables extensive information
                 logging in IGMP and MCAST generics.  It is used in
                 conjunction with the EventLogClient log flags.  This
                 value should be 0 unless extensive diagnostic information
                 is required.  This value is not persistent.
                 This setting takes effect immediately."
        ::= { sfpsMcastConfigApi 9 }

sfpsMcastConfigApiStaticTblSize   OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "This is the number of static entries that can be made to
                 the sender database (multicast connection table). 
                 Typically there would be no entries in this table.
                 Value will not take effect until blade is reset."
        ::= { sfpsMcastConfigApi 10 }

sfpsMcastConfigApiMcribSize   OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "This is the number of static entries that can be made to
                 the receiver database.  Typically there would be 
                 very few entries in this table.
                 Value will not take effect until blade is reset."
        ::= { sfpsMcastConfigApi 11 }

sfpsMcastConfigApiMcastMode   OBJECT-TYPE
        SYNTAX  INTEGER {
                doNoVlanChecking(1),
                doSomeVlanChecking(2),
                checkAll(3)
                }
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Multicast operates in three vlan checking modes.
                Mode 1 - Do no vlan checking.  The sender and 
                        receivers do not have to be on the same vlan.
                        Multicast connections in this mode disregard
                        whether or not the sender or receiver is in a
                        secure or open vlan.
                Mode 2 - Do some vlan checking.  This mode allows
                        connections to be established between any
                        sender/receivers on any vlan except for groups
                        using the 224.0.0.x range of ip multicast
                        addresses.  These addresses are used for the
                        most part by routers which should only be
                        communicating to each other when they are
                        in the same vlan.  Mode 2 restricts routers
                        to have the same port based vlan membership.
                Mode 3 - Check all.  The sender and receivers have
                        to be members of the same port based vlan.
                        This setting takes effect immediately.  No existing
                        connections will be torn down. "
        ::= { sfpsMcastConfigApi 12 }

sfpsMcastConfigApiRemapDelay   OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "When attempting to obtain a path from receiver to sender,
                a wait is sometimes incurred when pending on a switch
                resolve response.  Additionally, when topology events
                occur that cause a redirection of the connection tree,
                time must be allowed for the topology agents in the 
                domain to be notified before a new path can be
                requested.  This is the number of seconds that will
                elaspe before remapping will be attempted.
                This setting takes effect immediately.  "
        ::= { sfpsMcastConfigApi 13 }

sfpsMcastConfigApiQHighLimit   OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The default for the High Query Rate is 100"
        ::= { sfpsMcastConfigApi 14 }

sfpsMcastConfigApiQLowLimit   OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The default for the low query rate is 20 "
        ::= { sfpsMcastConfigApi 15 }


sfpsMcastConfigApiDynamicQuery   OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The default for the dynamic query is 1 (enabled)"
        ::= { sfpsMcastConfigApi 16 }



-- SFPS Multicast IP Sender Information Base Table

sfpsMcastIPSIBTable     OBJECT-TYPE
        SYNTAX  SEQUENCE OF SfpsMcastIPSIBEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION 
                ""
       ::= { sfpsMcastIPSenderInfoBase 1 }

sfpsMcastIPSIBEntry    OBJECT-TYPE
        SYNTAX  SfpsMcastIPSIBEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
               ""
        INDEX   { sfpsMcastIPSIBGroup, sfpsMcastIPSIBSender  }
       ::= { sfpsMcastIPSIBTable 1 }

SfpsMcastIPSIBEntry
    ::= SEQUENCE {
                sfpsMcastIPSIBGroup        IpAddress,
                sfpsMcastIPSIBSender       OCTET STRING,
                sfpsMcastIPSIBInclusion    INTEGER,
                sfpsMcastIPSIBAge          INTEGER
        }

sfpsMcastIPSIBGroup   OBJECT-TYPE
        SYNTAX  IpAddress
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                ""
        ::= { sfpsMcastIPSIBEntry 1 }

sfpsMcastIPSIBSender   OBJECT-TYPE
        SYNTAX  OCTET STRING
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                ""
        ::= { sfpsMcastIPSIBEntry 2 }

sfpsMcastIPSIBInclusion   OBJECT-TYPE
        SYNTAX  INTEGER {
                        include(1),
                        exclude(2)
                }
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                ""
        ::= { sfpsMcastIPSIBEntry 3 }

sfpsMcastIPSIBAge   OBJECT-TYPE
        SYNTAX  INTEGER
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                ""
        ::= { sfpsMcastIPSIBEntry 4 }


-- Ip Multicast Sender Information Base API

sfpsMcastIPSibApiGroup   OBJECT-TYPE
        SYNTAX  IpAddress
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                ""
        ::= { sfpsMcastIPSIBApi 1 }

sfpsMcastIPSibApiSender   OBJECT-TYPE
        SYNTAX  SfpsAddress
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                ""
        ::= { sfpsMcastIPSIBApi 2 }

sfpsMcastIPSibApiVerb   OBJECT-TYPE
        SYNTAX  INTEGER {
                        includeSender(1),
                        undoInclude(2),
                        excludeSender(3),
                        undoExclude(4),
                        reset(5)
                }
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                ""
        ::= { sfpsMcastIPSIBApi 3 }

END