ActiveXperts Network Monitor 2019##AdminFavorites

CTRON-SFPS-PORT-MIB by vendor Enterasys Networks Inc

CTRON-SFPS-PORT-MIB file content

The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.

Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.

Use ActiveXperts Network Monitor 2019 to import vendor-specific MIB files, inclusing CTRON-SFPS-PORT-MIB.


Vendor: Enterasys Networks Inc
Mib: CTRON-SFPS-PORT-MIB  [download]  [view objects]
Tool: ActiveXperts Network Monitor 2019 [download]    (ships with advanced SNMP/MIB tools)
CTRON-SFPS-PORT-MIB DEFINITIONS ::= BEGIN

--  sfps-port-mib.txt
--  Revision: 0.0.11
--
--  Cabletron Systems, Inc.
--  35 Industrial Way, P.O. Box 5005
--  Rochester, NH 03867-0505
--  (603) 332-9400
--  support@ctron.com
--
--  This module provides authoritative definitions for Cabletron's
--  enterprise specific Fast Packet Switching Services API MIB.
--
--  This module will be extended, as required.
--
--
--  Cabletron Systems reserves the right to make changes in
--  specification and other information contained in this document
--  without prior notice.  The reader should consult Cabletron Systems
--  to determine whether any such changes have been made.
--
--  In no event shall Cabletron Systems be liable for any incidental,
--  indirect, special, or consequential damages whatsoever (including
--  but not limited to lost profits) arising out of or related to this
--  document or the information contained in it, even if Cabletron
--  Systems has been advised of, known, or should have known, the
--  possibility of such damages.
--
--  Cabletron grants vendors, end-users, and other interested parties
--  a non-exclusive license to use this Specification in connection
--  with the management of Cabletron products.
--  Copyright October 93 Cabletron Systems
--

IMPORTS
      OBJECT-TYPE
                FROM RFC-1212
      DisplayString
                FROM RFC1213-MIB
--  tcl    enterprises
        Counter, TimeTicks, Gauge
                FROM RFC1155-SMI
 

--  These Objects are defined in the file sfps-inc.mib.txt.0.0.1
        sfpsPortConfig, sfpsPortStats, sfpsPortAttributeTable,
        sfpsPortAttributeAPI
                FROM CTRON-SFPS-INCLUDE-MIB;

--  Textual Conventions

--SfpsSwitchInstance ::= OCTET STRING (SIZE(4))
--  this will map to chassis.module index value
 
SfpsSwitchPort ::= INTEGER
--  this will map to chassis.module.portgroup.portsubgroup.port index value
 
--SfpsAddress ::= OCTET STRING (SIZE (6))
--  this will map to a MAC address
  
HexInteger ::= INTEGER
--  display this integer in hex format


  

--  SFPS Switching Port Group
--  This group contains the managed objects used to setup and
--  configure the SFPS ports for packet switching and statisics
--  monitoring.  This group contains two sub-groups:  configuration
--  and statistics. 


--  SFPS Port Configuration Tables
--  This table contains the managed objects used to set-up and configure
--  each SFPS switching port.  A seperate table exists for inbound ports
--  and outbound ports.

--  Inbound ports.

sfpsInPortConfigTable     OBJECT-TYPE
        SYNTAX  SEQUENCE OF SfpsInPortConfigEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "This table contains the configuration information of each
                 configured inbound SFPS switch port.  If SFPS is not
                 configured on a port, than an entry will not exist."
        ::= { sfpsPortConfig 1 }

sfpsInPortConfigEntry    OBJECT-TYPE
        SYNTAX  SfpsInPortConfigEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "Each entry specifies the SFPS configuration for the SFPS
                inbound switch port for which the entry exists."
        INDEX   { sfpsInPortConfigPort }
        ::= { sfpsInPortConfigTable 1 }

SfpsInPortConfigEntry ::=
        SEQUENCE {
                sfpsInPortConfigPort            SfpsSwitchPort,
                sfpsInPortConfigAdminStatus     INTEGER,
                sfpsInPortConfigOperStatus      INTEGER,
                sfpsInPortConfigOperTime        TimeTicks,
                sfpsInPortConfigType            INTEGER,
                sfpsInPortConfigReservedBW      INTEGER,
                sfpsInPortConfigAllocBW         INTEGER,
                sfpsInPortConfigQoS             INTEGER,
                sfpsInPortConfigQSize           INTEGER,
                sfpsInPortConfigQLen            Gauge,
                sfpsInPortConfigSwitchId        OCTET STRING,
                sfpsInPortConfigMediaType       INTEGER,
                sfpsInPortConfigFrontPanelPort  SfpsSwitchPort,
                sfpsInPortConfigLinkStatus      INTEGER,
                sfpsInPortConfigLinkStateAge    TimeTicks,
                sfpsInPortConfigRouterPort      INTEGER,
                sfpsInPortConfigSlotNumber      INTEGER,
                sfpsInPortConfigMib2PortId      INTEGER,
                sfpsInPortConfigTopoAgent       DisplayString,
                sfpsInPortConfigLayer3Learning  INTEGER
        }

sfpsInPortConfigPort    OBJECT-TYPE
        SYNTAX  SfpsSwitchPort
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The primary index to the SFPS in port table.  This identifies
                the inbound SFPS switch port for which the entry exists."
        ::= { sfpsInPortConfigEntry 1 }

sfpsInPortConfigAdminStatus      OBJECT-TYPE
        SYNTAX          INTEGER {
                            other(1),
                            disabled(2),
                            enabled(3),
                            loopback(4)
                        }
        ACCESS          read-write
        STATUS          mandatory
        DESCRIPTION
                "Sets the administrative state of the SFPS inbound switch port
                 for which the entry exists."
        ::= { sfpsInPortConfigEntry 2 }

sfpsInPortConfigOperStatus     OBJECT-TYPE
        SYNTAX  INTEGER {
                        other(1),             --  none of the following
                        disabled(2),          --  not running
                        enabled(3),           --  running
                        pending-disable(4),   --  shut-down in progress
                        pending-enable(5),    --  start-up in progress
                        invalid-config(6),    --  not running,invalid config
                        testing(7)            --  in loopback mode
                }
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Indicates the current operating condition of the SFPS
                 on the inbound switch port for which this entry exists."
        ::= { sfpsInPortConfigEntry 3 }

sfpsInPortConfigOperTime   OBJECT-TYPE
        SYNTAX  TimeTicks
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Indicates the elapsed time, in hundredths of a second,
                 that sfpsInPortOperStatus has been in its current
                 operational state on the SFPS inbound switch port for which
                 this entry exists."
        ::= { sfpsInPortConfigEntry 4 }

sfpsInPortConfigType      OBJECT-TYPE
        SYNTAX          INTEGER {
                            other(1),
                            access-port(2),
                            network-port(3),
                            host-mgmt-port(4),
                            host-ctl-port(5),
                            unknown(6),
                            going-to-access(7),
                            hybrid-port(8),
                            stand-by(9),
                            network-only(10),
                            accessOnly(11),
                            raPrimary(12),
                            uplink(13),
                            fclStandby(14),
                            loopStandby(15),
                            raStandby(16),
                            flood(17),
                            uplinkFlood(18),
                            downlinkFlood(19),
                            unknown-ra-standby(20)
                        }
        ACCESS          read-write
        STATUS          mandatory
        DESCRIPTION
                "Sets the type of port access attribute for the inbound SFPS
                 port for which the entry exists.  Access ports allow single
                 user or shared access and perform statisics and control;
                 network ports are equivalent to trunk ports with no access
                 control; host management port indicates the (virtual) port
                 to which the (internal) management agent is attached; host
                 control port indicates the port to redirect non-management
                 packets."
        ::= { sfpsInPortConfigEntry 5 }

sfpsInPortConfigReservedBW      OBJECT-TYPE
        SYNTAX          INTEGER
        ACCESS          read-write
        STATUS          mandatory
        DESCRIPTION
                "Sets the amount of Bandwidth that is reserved for the inbound
                 SFPS port for which this entry exists.  This bandwidth is
                 set aside for this port and may be given to another port if
                 unused."

--  ? should this be in Mbits/sec or as a percentage of total b/w.
--  Currently defined as percentage of total b/w in switch.
                 
        ::= { sfpsInPortConfigEntry 6 }

sfpsInPortConfigAllocBW      OBJECT-TYPE
        SYNTAX          INTEGER
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "Sets the amount of Bandwidth that is allocated for
                 the inbound SFPS port for which this entry exists.
                 This bandwidth may be less than the reserved
                 bandwidth." 

--  ? should this be in Mbits/sec or as a percentage of total b/w.
--  Currently defined as percentage of total b/w in switch.
                 
        ::= { sfpsInPortConfigEntry 7 }

sfpsInPortConfigQoS     OBJECT-TYPE
        SYNTAX          INTEGER
        ACCESS          read-write
        STATUS          mandatory
        DESCRIPTION
                "Sets the desired QoS service class for the inbound
                 SFPS port for which this entry exists."

--  ? should this map to the ATM service classes

        ::= { sfpsInPortConfigEntry 8 }

sfpsInPortConfigQSize    OBJECT-TYPE
        SYNTAX          INTEGER
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "Indicates the maximum inbound queue size for this port.
                 Size is indicated in packets (packet descriptors)."
        ::= { sfpsInPortConfigEntry 9 }

sfpsInPortConfigQLen    OBJECT-TYPE
        SYNTAX          Gauge
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "Indicates the actual inbound queue size for this port.
                 Size is indicated in packets (packet descriptors).  This
                 is a transient value that reflects the current depth of
                 queue."
        ::= { sfpsInPortConfigEntry 10 }

sfpsInPortConfigSwitchId  OBJECT-TYPE
        SYNTAX          OCTET STRING
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "This entry is the id of the port." 
        ::= { sfpsInPortConfigEntry 11 }

sfpsInPortConfigMediaType      OBJECT-TYPE
        SYNTAX          INTEGER {
                            ethernet(1),
                            fddi(2),
                            atm-lec(3),
                            token-ring(4),
                            wan(5),
                            inb(6),
                            hcp(7),
                            hdp(8),
                            atm-svc(9),
                            atm-pvc(10),
                            unknown(11),
                            atm-forum-lec(12),
                            atm-forum-pvc(13),
                            atm-forum-svc(14)
                        }
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                ""
        ::= { sfpsInPortConfigEntry 12 }

sfpsInPortConfigFrontPanelPort     OBJECT-TYPE
        SYNTAX          SfpsSwitchPort
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "This represents the front panel physical port number"
        ::= { sfpsInPortConfigEntry 13 }

sfpsInPortConfigLinkStatus      OBJECT-TYPE
        SYNTAX          INTEGER {
                            other(1),
                            linkUp(2),
                            linkDown(3),
                                        link-N-A(4)
                        }
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "The link status of this port."
        ::= { sfpsInPortConfigEntry 14 }

sfpsInPortConfigLinkStateAge      OBJECT-TYPE
        SYNTAX          TimeTicks
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "Number of time ticks that link has been in this state."
        ::= { sfpsInPortConfigEntry 15 }


sfpsInPortConfigRouterPort      OBJECT-TYPE
        SYNTAX          INTEGER {
                            other(1),
                            router-port(2),
                            no-router(3)
                        }
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "Specifies whether this port is a router port."
        ::= { sfpsInPortConfigEntry 16 }

sfpsInPortConfigSlotNumber      OBJECT-TYPE
    SYNTAX      INTEGER
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "Slot number in the chassis."
        ::= { sfpsInPortConfigEntry 17 }

sfpsInPortConfigMib2PortId      OBJECT-TYPE
    SYNTAX      INTEGER
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "Mib2 Port id"
        ::= { sfpsInPortConfigEntry 18 }

sfpsInPortConfigTopoAgent      OBJECT-TYPE
    SYNTAX      DisplayString
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "Topology Agent"
        ::= { sfpsInPortConfigEntry 19 }

sfpsInPortConfigLayer3Learning      OBJECT-TYPE
    SYNTAX      INTEGER {
                other(1),
                enabled(2),
                disabled(3)
        }
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "Topology Agent"
        ::= { sfpsInPortConfigEntry 22 }




--  Outbound Ports

sfpsOutPortConfigTable     OBJECT-TYPE
        SYNTAX  SEQUENCE OF SfpsOutPortConfigEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "This table contains the configuration information of each
                 configured outbound SFPS switch port.  If SFPS is not
                 configured on a port, than an entry will not exist."
        ::= { sfpsPortConfig 2 }

sfpsOutPortConfigEntry    OBJECT-TYPE
        SYNTAX  SfpsOutPortConfigEntry
        ACCESS  not-accessible
        STATUS  mandatory
        DESCRIPTION
                "Each entry specifies the SFPS configuration for the SFPS
                outbound switch port for which the entry exists."
        INDEX   { sfpsOutPortConfigPort }
        ::= { sfpsOutPortConfigTable 1 }

SfpsOutPortConfigEntry ::=
        SEQUENCE {
                sfpsOutPortConfigPort            SfpsSwitchPort,
                sfpsOutPortConfigAdminStatus     INTEGER,
                sfpsOutPortConfigOperStatus      INTEGER,
                sfpsOutPortConfigOperTime        TimeTicks,
                sfpsOutPortConfigType            INTEGER,
                sfpsOutPortConfigReservedBW      INTEGER,
                sfpsOutPortConfigAllocBW         INTEGER,
                sfpsOutPortConfigQoS             INTEGER,
                sfpsOutPortConfigQSize           INTEGER,
                sfpsOutPortConfigQLen            Gauge,
                sfpsOutPortConfigSwitchId        OCTET STRING,
                sfpsOutPortConfigMediaType       INTEGER,
                sfpsOutPortConfigFrontPanelPort  SfpsSwitchPort,
                sfpsOutPortConfigLinkStatus      INTEGER,
                sfpsOutPortConfigLinkStateAge    TimeTicks,
                sfpsOutPortConfigRouterPort      INTEGER,
                sfpsOutPortConfigSlotNumber      INTEGER,
                sfpsOutPortConfigMib2PortId      INTEGER


        }

sfpsOutPortConfigPort    OBJECT-TYPE
        SYNTAX  SfpsSwitchPort
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The primary index to the SFPS in port table.  This identifies
                the outbound SFPS switch port for which the entry exists."
        ::= { sfpsOutPortConfigEntry 1 }

sfpsOutPortConfigAdminStatus      OBJECT-TYPE
        SYNTAX          INTEGER {
                            other(1),
                            disabled(2),
                            enabled(3),
                            loopback(4)
                        }
        ACCESS          read-write
        STATUS          mandatory
        DESCRIPTION
                "Sets the administrative state of the SFPS outbound switch port
                 for which the entry exists."
        ::= { sfpsOutPortConfigEntry 2 }

sfpsOutPortConfigOperStatus     OBJECT-TYPE
        SYNTAX  INTEGER {
                        other(1),             --  none of the following
                        disabled(2),          --  not running
                        enabled(3),           --  running
                        pending-disable(4),   --  shut-down in progress
                        pending-enable(5),    --  start-up in progress
                        invalid-config(6),    --  not running,invalid config
                        testing(7)            --  in loopback mode
                }
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Indicates the current operating condition of the SFPS
                 on the outbound switch port for which this entry exists."
        ::= { sfpsOutPortConfigEntry 3 }

sfpsOutPortConfigOperTime   OBJECT-TYPE
        SYNTAX  TimeTicks
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Indicates the elapsed time, in hundredths of a second,
                 that sfpsOutPortOperStatus has been in its current
                 operational state on the SFPS outbound switch port for which
                 this entry exists."
        ::= { sfpsOutPortConfigEntry 4 }

sfpsOutPortConfigType      OBJECT-TYPE
        SYNTAX          INTEGER {
                            other(1),
                            access-port(2),
                            network-port(3),
                            host-mgmt-port(4),
                            host-ctl-port(5),
                            unknown(6),
                            going-to-access(7),
                            hybrid-port(8),
                                        stand-by(9),
                            network-only(10),
                            accessOnly(11),
                            raPrimary(12),
                            standbyFCLConflict(13),
                            standbyLoopedPort(14),
                            standbyVersionConflict(15),
                            standbyRANonPrimary(16),
                            flood(17),
                            uplinkFlood(18),
                            downlinkFlood(19),
                            unknown-ra-standby(20)
                        }
        ACCESS          read-write
        STATUS          mandatory
        DESCRIPTION
                "Sets the type of port access attribute for the outbound SFPS
                 port for which the entry exists.  Access ports allow single
                 user or shared access and perform statisics and control;
                 network ports are equivalent to trunk ports with no access
                 control; host management port indicates the (virtual) port
                 to which the (internal) management agent is attached; host
                 control port indicates the port to redirect non-management
                 packets."
        ::= { sfpsOutPortConfigEntry 5 }

sfpsOutPortConfigReservedBW      OBJECT-TYPE
        SYNTAX          INTEGER
        ACCESS          read-write
        STATUS          mandatory
        DESCRIPTION
                "Sets the amount of Bandwidth that is reserved for the outbound
                 SFPS port for which this entry exists.  This bandwidth is
                 set aside for this port and may be given to another port if
                 unused."

--  ? should this be in Mbits/sec or as a percentage of total b/w.
--  Currently defined as percentage of total b/w in switch.
                 
        ::= { sfpsOutPortConfigEntry 6 }

sfpsOutPortConfigAllocBW      OBJECT-TYPE
        SYNTAX          INTEGER
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "Sets the amount of Bandwidth that is allocated for
                 the outbound  SFPS port for which this entry exists.
                 This bandwidth may be less than the reserved
                 bandwidth." 

--  ? should this be in Mbits/sec or as a percentage of total b/w.
--  Currently defined as percentage of total b/w in switch.
                 
        ::= { sfpsOutPortConfigEntry 7 }

sfpsOutPortConfigQoS     OBJECT-TYPE
        SYNTAX          INTEGER
        ACCESS          read-write
        STATUS          mandatory
        DESCRIPTION
                "Sets the desired QoS service class for the outbound
                 SFPS port for which this entry exists."

--  ? should this map to the ATM service classes

        ::= { sfpsOutPortConfigEntry 8 }

sfpsOutPortConfigQSize    OBJECT-TYPE
        SYNTAX          INTEGER
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "Indicates the maximum outbound queue size for this port.
                 Size is indicated in packets (packet descriptors)."
        ::= { sfpsOutPortConfigEntry 9 }

sfpsOutPortConfigQLen    OBJECT-TYPE
        SYNTAX          Gauge
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "Indicates the actual outbound queue size for this port.
                 Size is indicated in packets (packet descriptors).  This
                 is a transient value that reflects the current depth of
                 queue."
        ::= { sfpsOutPortConfigEntry 10 }

sfpsOutPortConfigSwitchId       OBJECT-TYPE
        SYNTAX          OCTET STRING
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "This entry is id of the port."
        ::= { sfpsOutPortConfigEntry 11 }

sfpsOutPortConfigMediaType      OBJECT-TYPE
        SYNTAX          INTEGER {
                            ethernet(1),
                            fddi(2),
                            atm-lec(3),
                            token-ring(4),
                            wan(5),
                            inb(6),
                            hcp(7),
                            hdp(8),
                            atm-encap(9),
                            atm-pvc(10),
                            unknown(11),
                            atm-forum-lec(12),
                            atm-forum-pvc(13),
                            atm-forum-svc(14)
                        }
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                ""
        ::= { sfpsOutPortConfigEntry 12 }

sfpsOutPortConfigFrontPanelPort      OBJECT-TYPE
        SYNTAX          SfpsSwitchPort
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                ""
        ::= { sfpsOutPortConfigEntry 13 }

sfpsOutPortConfigLinkStatus      OBJECT-TYPE
        SYNTAX          INTEGER {
                            other(1),
                            linkUp(2),
                            linkDown(3),
                            linkNA(4)
                        }
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "The link status of this port."
        ::= { sfpsOutPortConfigEntry 14 }

sfpsOutPortConfigLinkStateAge      OBJECT-TYPE
        SYNTAX          TimeTicks
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "Number of time ticks that link has been in this state."
        ::= { sfpsOutPortConfigEntry 15 }

sfpsOutPortConfigRouterPort      OBJECT-TYPE
        SYNTAX          INTEGER {
                            other(1),
                            router-port(2),
                            no-router(3)
                        }
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "Specifies whether this port is a router port."
        ::= { sfpsOutPortConfigEntry 16 }

sfpsOutPortConfigSlotNumber      OBJECT-TYPE
    SYNTAX      INTEGER
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "Slot number in the chassis."
        ::= { sfpsOutPortConfigEntry 17 }

sfpsOutPortConfigMib2PortId      OBJECT-TYPE
    SYNTAX      INTEGER
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "Mib2 Port id"
        ::= { sfpsOutPortConfigEntry 18 }



--

-- SFPS Switching Port Statistics Tables
-- This table contains the objects that specify the packet and byte counters
-- for each configured SFPS switching port.  A separate table exists for
-- inbound and outbound ports.

--  Inbound ports.

sfpsInPortStatsTable         OBJECT-TYPE
        SYNTAX      SEQUENCE OF SfpsInPortStatsEntry
        ACCESS          not-accessible
        STATUS          mandatory
        DESCRIPTION
                "This table contains the packet and byte counters for each
                 inbound SFPS switch port."
        ::= { sfpsPortStats 1 }

sfpsInPortStatsEntry         OBJECT-TYPE
        SYNTAX      SfpsInPortStatsEntry
        ACCESS      not-accessible
        STATUS          mandatory
        DESCRIPTION
                "Specifies the SFPS packet and byte counters for the
                 inbound SFPS switch port for which this entry exists."
        INDEX           { sfpsInPortStatsPort }
        ::= { sfpsInPortStatsTable 1 }

SfpsInPortStatsEntry ::=
        SEQUENCE {
                sfpsInPortStatsPort                  SfpsSwitchPort,
                sfpsInPortStatsAdminStatus           INTEGER,
                sfpsInPortStatsReset                 INTEGER,
                sfpsInPortStatsOperTime              TimeTicks,
                sfpsInPortStatsPkts                  Counter,
                sfpsInPortStatsDiscardPkts           Counter,
                sfpsInPortStatsBytes                 Counter,
                sfpsInPortStatsDiscardBytes          Counter,
                sfpsInPortStatsQOverflows            Counter,
                sfpsInPortStatsLinkUps               Counter,
                sfpsInPortStatsLinkDowns             Counter
        }

sfpsInPortStatsPort     OBJECT-TYPE
        SYNTAX          SfpsSwitchPort
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "The primary index to the SFPS port table.  This identifies
                the SFPS inbound switch port for which the entry exists."
        ::= { sfpsInPortStatsEntry 1 }

sfpsInPortStatsAdminStatus   OBJECT-TYPE
        SYNTAX          INTEGER {
                            other(1),
                            disabled(2),
                            enabled(3)
                        }
        ACCESS          read-write
        STATUS          mandatory
        DESCRIPTION
                "Sets the administrative state of the SFPS packet and byte
                 counters on the inbound SFPS switch port for which this entry
                 exists."
        ::= { sfpsInPortStatsEntry 2 }

sfpsInPortStatsReset         OBJECT-TYPE
        SYNTAX          INTEGER {
                            other(1),
                            reset(2)
                        }
        ACCESS          read-write
        STATUS          mandatory
        DESCRIPTION
                "Resets the SFPS packet and byte counters on the inbound SFPS
                switch port for which this entry exists."
        ::= { sfpsInPortStatsEntry 3 }

sfpsInPortStatsOperTime        OBJECT-TYPE
        SYNTAX          TimeTicks
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "Indicates the amount of time (# of time ticks) that the
                port-specific SFPS packet and byte counters have been
                active on the inbound SFPS switch port for which this entry
                exists."
        ::= { sfpsInPortStatsEntry 4 }

sfpsInPortStatsPkts        OBJECT-TYPE
        SYNTAX          Counter
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "Indicates the total number of SFPS packets that have been
                 received, during sfpsInPortStatsOpertime, on the inbound
                 SFPS switch port for which this entry exists."
        ::= { sfpsInPortStatsEntry 5 }

sfpsInPortStatsDiscardPkts       OBJECT-TYPE
        SYNTAX          Counter
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "Indicates the total number of SFPS packets that have been
                 discarded (dropped), during sfpsInPortStatsOpertime, on the
                 inbound SFPS switch port for which this entry exists"
        ::= { sfpsInPortStatsEntry 6 }

sfpsInPortStatsBytes  OBJECT-TYPE
        SYNTAX          Counter
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "Indicates the total number of SFPS bytes that have been
                received, during sfpsInPortStatsOperTime, on the inbound
                SFPS switch port for which the entry exists."
        ::= { sfpsInPortStatsEntry 7 }

sfpsInPortStatsDiscardBytes OBJECT-TYPE
        SYNTAX          Counter
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "Indicates the total number of bytes in the SFPS packets
                that have been discarded (dropped), during
                sfpsInPortStatsOperTime, on the inbound SFPS switch port for
                which the entry exists."
        ::= { sfpsInPortStatsEntry 8 }

sfpsInPortStatsQOverflows OBJECT-TYPE
        SYNTAX          Counter
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "Indicates the total number of queue overflow conditions
                 have been experienced for the inbound SFPS switch port
                 for which the entry exists."
        ::= { sfpsInPortStatsEntry 9 }

sfpsInPortStatsLinkUps OBJECT-TYPE
        SYNTAX          Counter
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "The number of link ups that this port has seen."
        ::= { sfpsInPortStatsEntry 10 }

sfpsInPortStatsLinkDowns OBJECT-TYPE
        SYNTAX          Counter
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "The number of link downs that this port has seen."
        ::= { sfpsInPortStatsEntry 11 }

--

--  Outbound ports.

sfpsOutPortStatsTable         OBJECT-TYPE
        SYNTAX      SEQUENCE OF SfpsOutPortStatsEntry
        ACCESS          not-accessible
        STATUS          mandatory
        DESCRIPTION
                "This table contains the packet and byte counters for each
                 outbound SFPS switch port."
        ::= { sfpsPortStats 2 }

sfpsOutPortStatsEntry         OBJECT-TYPE
        SYNTAX      SfpsOutPortStatsEntry
        ACCESS      not-accessible
        STATUS          mandatory
        DESCRIPTION
                "Specifies the SFPS packet and byte counters for the
                 outbound SFPS switch port for which this entry exists."
        INDEX           { sfpsOutPortStatsPort }
        ::= { sfpsOutPortStatsTable 1 }

SfpsOutPortStatsEntry ::=
        SEQUENCE {
                sfpsOutPortStatsPort                  SfpsSwitchPort,
                sfpsOutPortStatsAdminStatus           INTEGER,
                sfpsOutPortStatsReset                 INTEGER,
                sfpsOutPortStatsOperTime              TimeTicks,
                sfpsOutPortStatsPkts                  Counter,
                sfpsOutPortStatsDiscardPkts           Counter,
                sfpsOutPortStatsBytes                 Counter,
                sfpsOutPortStatsDiscardBytes          Counter,
                sfpsOutPortStatsQOverflows            Counter,
                sfpsOutPortStatsLinkUps               Counter,
                sfpsOutPortStatsLinkDowns             Counter
        }

sfpsOutPortStatsPort     OBJECT-TYPE
        SYNTAX          SfpsSwitchPort
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "The primary index to the SFPS port table.  This identifies
                the SFPS outbound switch port for which the entry exists."
        ::= { sfpsOutPortStatsEntry 1 }

sfpsOutPortStatsAdminStatus   OBJECT-TYPE
        SYNTAX          INTEGER {
                            other(1),
                            disabled(2),
                            enabled(3)
                        }
        ACCESS          read-write
        STATUS          mandatory
        DESCRIPTION
                "Sets the administrative state of the SFPS packet and byte
                 counters on the outbound SFPS switch port for which this entry
                 exists."
        ::= { sfpsOutPortStatsEntry 2 }

sfpsOutPortStatsReset         OBJECT-TYPE
        SYNTAX          INTEGER {
                            other(1),
                            reset(2)
                        }
        ACCESS          read-write
        STATUS          mandatory
        DESCRIPTION
                "Resets the SFPS packet and byte counters on the outbound SFPS
                switch port for which this entry exists."
        ::= { sfpsOutPortStatsEntry 3 }

sfpsOutPortStatsOperTime        OBJECT-TYPE
        SYNTAX          TimeTicks
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "Indicates the amount of time (# of time ticks) that the
                port-specific SFPS packet and byte counters have been
                active on the outbound SFPS switch port for which this entry
                exists."
        ::= { sfpsOutPortStatsEntry 4 }

sfpsOutPortStatsPkts        OBJECT-TYPE
        SYNTAX          Counter
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "Indicates the total number of SFPS packets that have been
                 received, during sfpsOutPortStatsOpertime, on the outbound
                 SFPS switch port for which this entry exists."
        ::= { sfpsOutPortStatsEntry 5 }

sfpsOutPortStatsDiscardPkts       OBJECT-TYPE
        SYNTAX          Counter
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "Indicates the total number of SFPS packets that have been
                 discarded (dropped), during sfpsOutPortStatsOpertime, on the
                 outbound SFPS switch port for which this entry exists"
        ::= { sfpsOutPortStatsEntry 6 }

sfpsOutPortStatsBytes  OBJECT-TYPE
        SYNTAX          Counter
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "Indicates the total number of SFPS bytes that have been
                received, during sfpsOutPortStatsOperTime, on the outbound
                SFPS switch port for which the entry exists."
        ::= { sfpsOutPortStatsEntry 7 }

sfpsOutPortStatsDiscardBytes OBJECT-TYPE
        SYNTAX          Counter
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "Indicates the total number of bytes in the SFPS packets
                that have been discarded (dropped), during
                sfpsOutPortStatsOperTime, on the outbound SFPS switch port for
                which the entry exists."
        ::= { sfpsOutPortStatsEntry 8 }

sfpsOutPortStatsQOverflows OBJECT-TYPE
        SYNTAX          Counter
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "Indicates the total number of queue overflow conditions
                 have been experienced for the outbound SFPS switch port
                 for which the entry exists."
        ::= { sfpsOutPortStatsEntry 9 }

sfpsOutPortStatsLinkUps OBJECT-TYPE
        SYNTAX          Counter
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "The number of link ups that this port has seen."
        ::= { sfpsOutPortStatsEntry 10 }

sfpsOutPortStatsLinkDowns OBJECT-TYPE
        SYNTAX          Counter
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                "The number of link downs that this port has seen."
        ::= { sfpsOutPortStatsEntry 11 }


-- Port Attributes

sfpsPortAttributePort     OBJECT-TYPE
    SYNTAX      INTEGER 
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                ""
        ::= { sfpsPortAttributeTable 1 }

sfpsPortAttributeAttributes     OBJECT-TYPE
    SYNTAX      HexInteger      
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                ""
        ::= { sfpsPortAttributeTable 2 }

sfpsPortAttributeLearnSelfArp     OBJECT-TYPE
    SYNTAX      INTEGER {
                off(2),
                on(1)
        }
        ACCESS          read-only
        STATUS          mandatory
        DESCRIPTION
                ""
        ::= { sfpsPortAttributeTable 3 }


-- Port Attributes API

sfpsPortAttributeAPIVerb     OBJECT-TYPE
    SYNTAX      INTEGER {
                other(1),
                resetAll(2),
                resetPort(3),
                enablePortAttr(4),
                disablePortAttr(5)
        }
        ACCESS          read-write
        STATUS          mandatory
        DESCRIPTION
                ""
        ::= { sfpsPortAttributeAPI 1 }

sfpsPortAttributeAPIPort     OBJECT-TYPE
    SYNTAX      INTEGER 
        ACCESS          read-write
        STATUS          mandatory
        DESCRIPTION
                ""
        ::= { sfpsPortAttributeAPI 2 }

sfpsPortAttributeAPIAttribute     OBJECT-TYPE
    SYNTAX      INTEGER {
                none(2),
                learnSelfArp(1)
        }
        ACCESS          read-write
        STATUS          mandatory
        DESCRIPTION
                ""
        ::= { sfpsPortAttributeAPI 3 }

END