CTRON-SFPS-VLAN-MIB device MIB details by Enterasys Networks Inc
CTRON-SFPS-VLAN-MIB file content
The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.
Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.
Use ActiveXperts Network Monitor 2024 to import vendor-specific MIB files, inclusing CTRON-SFPS-VLAN-MIB.
| Vendor: | Enterasys Networks Inc |
|---|---|
| Mib: | CTRON-SFPS-VLAN-MIB [download] [view objects] |
| Tool: | ActiveXperts Network Monitor 2024 [download] (ships with advanced SNMP/MIB tools) |
CTRON-SFPS-VLAN-MIB DEFINITIONS ::= BEGIN -- sfps-vlan-mib.txt -- Revision: 0.0.09 -- -- Cabletron Systems, Inc. -- 35 Industrial Way, P.O. Box 5005 -- Rochester, NH 03867-0505 -- (603) 332-9400 -- support@ctron.com -- -- This module provides authoritative definitions for Cabletron's -- enterprise specific Fast Packet Switching Services API MIB. -- -- This module will be extended, as required. -- -- -- Cabletron Systems reserves the right to make changes in -- specification and other information contained in this document -- without prior notice. The reader should consult Cabletron Systems -- to determine whether any such changes have been made. -- -- In no event shall Cabletron Systems be liable for any incidental, -- indirect, special, or consequential damages whatsoever (including -- but not limited to lost profits) arising out of or related to this -- document or the information contained in it, even if Cabletron -- Systems has been advised of, known, or should have known, the -- possibility of such damages. -- -- Cabletron grants vendors, end-users, and other interested parties -- a non-exclusive license to use this Specification in connection -- with the management of Cabletron products. -- Copyright October 93 Cabletron Systems -- IMPORTS OBJECT-TYPE FROM RFC-1212 DisplayString FROM RFC1213-MIB -- enterprises, TimeTicks, IpAddress -- Counter, -- Gauge FROM RFC1155-SMI -- These Objects are defined in the file sfps-inc.mib.txt.0.0.1 vlanAPI, vlanName, vlanSystem, vlanTestAPI, vlanCountAPI, vlanAMRRules, vlanAMRStats,vlanAMRSubnets, vlanPort FROM CTRON-SFPS-INCLUDE-MIB; -- Textual Conventions VlanSwitchInstance ::= INTEGER -- this will map to chassis.module index value SfpsAddress ::= OCTET STRING (SIZE (6)) -- this will map to a MAC address HexInteger ::= INTEGER SfpsSwitchPort ::= INTEGER -- this will map to chassis.module.portgroup.portsubgroup.port index value -- VLAN Switch Engine API Group -- This group contains the objects that pertain to the VLAN Engine and -- its external Application Program Interface (API). The API provides a -- verb-based autonomous interface to mapping and unmapping connections. -- SFPS Virtual Bus API Group -- This group contains the objects that pertain to the SFPS vlan and -- its external Application Program Interface (API). The API provides a -- verb-based autonomous interface to mapping and unmapping connections. sfpsVAPIVerb OBJECT-TYPE SYNTAX INTEGER { other(1), -- none of the following add-vlan(2), -- add a user mapping delete-vlan(3), -- add a user mapping enable-vlan(4), -- enables the entire vlan disable-vlan(5), -- disables the vlan map-port(6), -- add an access port to the vlan unmap-port(7), -- remove an access port from the vlan enable-port(8), -- enable an access port disable-port(9), -- disable an access port map-user(10), -- add a user mapping unmap-user(11), -- remove a user mapping tap-vlan(12), -- call tap a vlan untap-vlan(13), -- remove call tap auto-register(14), auto-unregister(15) } ACCESS read-write STATUS mandatory DESCRIPTION "Specifies the action to be initiated as a result of setting this leaf." ::= { vlanAPI 1 } sfpsVAPIInPort OBJECT-TYPE SYNTAX SfpsSwitchPort ACCESS read-write STATUS mandatory DESCRIPTION "Specifies the ingress port of the Virtual LAN if mapping a connection. Specifies the source port of a user when mapping a user" ::= { vlanAPI 2 } sfpsVAPIVlanName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Specifies the Virtual LAN ID." ::= { vlanAPI 3 } sfpsVAPIOutPort OBJECT-TYPE SYNTAX SfpsSwitchPort ACCESS read-write STATUS mandatory DESCRIPTION "Specifies the egress port of the Virtual LAN if mapping a connection." ::= { vlanAPI 4 } sfpsVAPIUserMAC OBJECT-TYPE SYNTAX SfpsAddress ACCESS read-write STATUS mandatory DESCRIPTION "Specifies the actual user's MAC value for the action." ::= { vlanAPI 5 } sfpsVAPIUserAliasTag OBJECT-TYPE SYNTAX INTEGER { aoMacDx(1), aoIpxSap(2), aoIpxRIP(3), aoInetYP(4), aoInetUDP(5), aoIpxIpx(6), aoInetIP(7), aoInetRPC(8), aoInetRIP(9), aoMacDXMcast(10), aoAtDDP(11), aoEmpty(12), aoVlan(13), aoHostName(14), aoNetBiosName(15), aoInetIPMask(16) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates the Alias Value of the user. Not yet supported." ::= { vlanAPI 6 } sfpsVAPIUserAlias OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Indicates the Alias Value of the user." ::= { vlanAPI 7 } sfpsVAPIAdminStatus OBJECT-TYPE SYNTAX INTEGER { other(1), -- none of the following disabled(2), -- shutdown the object enabled(3) -- startup the SFPS } ACCESS read-write STATUS mandatory DESCRIPTION "Sets the administrative state of the object." DEFVAL { enabled } ::= { vlanAPI 8 } sfpsVAPIAutoRegisterRule OBJECT-TYPE SYNTAX INTEGER { other(1), ether-type(2), ip-subnet(3), netBIOS(4), ipx-Server(5), appleTalk(6), decNET(7), vines(8), bpdu(9) } ACCESS read-write STATUS mandatory DESCRIPTION "Specifies the AMR rule in which to perform the action on." ::= { vlanAPI 9 } sfpsVAPIAutoRegMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Indicates the mask to apply when the IP-Subnet rule is invoked." ::= { vlanAPI 10 } sfpsVAPIAutoRegValue OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Indicates the Alias Value of the user." ::= { vlanAPI 11 } sfpsVAPIUnicastPolicy OBJECT-TYPE SYNTAX INTEGER { other(1), open(2), secure(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Sets the vlan policy type." DEFVAL { open } ::= { vlanAPI 12} sfpsVAPIPortPolicy OBJECT-TYPE SYNTAX INTEGER { other(1), normal(2), locked(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Sets the port mode type." DEFVAL { locked } ::= { vlanAPI 13} sfpsVAPIFloodPolicy OBJECT-TYPE SYNTAX INTEGER { other(1), flooding-on(2), flooding-off(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Sets the flood mode type." DEFVAL {flooding-on } ::= { vlanAPI 14} sfpsVAPIRouterPort OBJECT-TYPE SYNTAX INTEGER { other(1), router-port(2), no-router(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Sets router port" ::= { vlanAPI 15} sfpsVAPIVlanId OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Indicates the Vlan Id." ::= { vlanAPI 16 } sfpsVAPINvramId OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Indicates the Nvram Id" ::= { vlanAPI 17 } sfpsVAPIRelayAgent OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Indicates the Relay Agent." ::= { vlanAPI 18 } sfpsVAPILayer3Learning OBJECT-TYPE SYNTAX INTEGER { other(1), learning-enabled(2), learning-disabled(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates layer 3 learning enabled/disabled" ::= { vlanAPI 19 } -- -- SFPS Virtual Bus Table -- This table contains the SFPS-specific Vlan table managed objects. -- Note that because this table is indexed by the Vlan index -- . -- VlanName vlanNameTable OBJECT-TYPE SYNTAX SEQUENCE OF VlanNameEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains information of each SFVlan instance. Essentially, a separate SFVlan instance exists for each Vlan. If SFVlan is not configured on a module, than an entry will not exist." ::= { vlanName 1 } vlanNameEntry OBJECT-TYPE SYNTAX VlanNameEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry specifies the configuration for the Vlan instance." INDEX { vlanNameNHash, vlanNameIndex } ::= { vlanNameTable 1 } VlanNameEntry ::= SEQUENCE { vlanNameNHash HexInteger, vlanNameIndex INTEGER, vlanNameVlanName DisplayString, vlanNameAdminStatus INTEGER, vlanNameOperStatus INTEGER, vlanNameUniPolicy INTEGER, vlanNameFloodPolicy INTEGER, vlanNameStatusTime TimeTicks, vlanNameNumUsers DisplayString, vlanNameEnabledPorts DisplayString, vlanNameMappedPorts DisplayString, vlanNameVlanRule INTEGER, vlanNameFloodPorts DisplayString, vlanNameVlanId INTEGER, vlanNameRelayAgent IpAddress } vlanNameNHash OBJECT-TYPE SYNTAX HexInteger ACCESS read-only STATUS mandatory DESCRIPTION "The primary index to the VlanName table." ::= { vlanNameEntry 1 } vlanNameIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The secondary index to the VlanName table." ::= { vlanNameEntry 2 } vlanNameVlanName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The Virual LAN ID." ::= { vlanNameEntry 3 } vlanNameAdminStatus OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The administrative state of the Vlan." ::= { vlanNameEntry 4 } vlanNameOperStatus OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3), shutdown-pending(4), startup-pending(5), invalid-config(6), testing(7) } ACCESS read-only STATUS mandatory DESCRIPTION "The operational state of the Vlan." ::= { vlanNameEntry 5 } vlanNameUniPolicy OBJECT-TYPE SYNTAX INTEGER { other(1), open(2), secure(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The communication policy with respect to other Vlans." ::= { vlanNameEntry 6 } vlanNameFloodPolicy OBJECT-TYPE SYNTAX INTEGER { other(1), flood-on(3), flood-off(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The multicast and unknown destination flood policy." ::= { vlanNameEntry 7 } vlanNameStatusTime OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The amount of time that this Vlan has been in its current operational state." ::= { vlanNameEntry 8 } vlanNameNumUsers OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The number of users per port" ::= { vlanNameEntry 9 } vlanNameEnabledPorts OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The list of ports which have are enabled for this Vlan." ::= { vlanNameEntry 10 } vlanNameMappedPorts OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The list of ports which have this Vlan mapped to it." ::= { vlanNameEntry 11 } vlanNameVlanRule OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { vlanNameEntry 12 } vlanNameFloodPorts OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { vlanNameEntry 13 } vlanNameVlanId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { vlanNameEntry 14 } vlanNameRelayAgent OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { vlanNameEntry 15 } -- -- VLAN Switch Configuration Group -- This group contains the objects that pertain to the setup and -- configuration of a single instance of an VLAN. vlanSystemTable OBJECT-TYPE SYNTAX SEQUENCE OF VlanSystemEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains the configuration and administrative information of each SFVlan switch instance. Essentially, a separate SFVlan switch instance exists for each switch module. If SFVlan is not configured on a module, than an entry will not exist." ::= { vlanSystem 1 } vlanSystemEntry OBJECT-TYPE SYNTAX VlanSystemEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry specifies the VLAN configuration for the VLAN instance." INDEX { vlanSystemSwitchInstance } ::= { vlanSystemTable 1 } VlanSystemEntry ::= SEQUENCE { vlanSystemSwitchInstance VlanSwitchInstance, vlanSystemAdminStatus INTEGER, vlanSystemAdminReset INTEGER, vlanSystemOperStatus INTEGER, vlanSystemOperTime TimeTicks, vlanSystemLastChange TimeTicks, vlanSystemVersion DisplayString, vlanSystemMibRev DisplayString, vlanSystemAgentIP IpAddress, vlanSystemDomainName DisplayString, vlanSystemPollCount INTEGER, vlanSystemFirstPollTime TimeTicks, vlanSystemLastPollTime TimeTicks, vlanSystemPriorPollTime TimeTicks, vlanSystemDeltaPollTime TimeTicks } vlanSystemSwitchInstance OBJECT-TYPE SYNTAX VlanSwitchInstance ACCESS read-only STATUS mandatory DESCRIPTION "The primary index to the VLAN switch table. This identifies the VLAN switch for which the entry exists." ::= { vlanSystemEntry 1 } vlanSystemAdminStatus OBJECT-TYPE SYNTAX INTEGER { other(1), -- none of the following disabled(2), -- shutdown the VLAN enabled(3) -- startup the VLAN } ACCESS read-write STATUS mandatory DESCRIPTION "Sets the administrative state of the VLAN switching services for this VLAN instance. This controls the VLAN state at a module level. Regardless of the per-port state of each VLAN switching port and the state of active connections, writing the value disabled(2) will cause the VLAN to immediately shutdown. A gracefull shutdown will be attempted." ::= { vlanSystemEntry 2 } vlanSystemAdminReset OBJECT-TYPE SYNTAX INTEGER { other(1), -- none of the following reset(2) -- force a reset } ACCESS read-write STATUS mandatory DESCRIPTION "Resets this VLAN switch instance. Writing a vlue of reset(2) will force a soft restart of the VLAN without any graceful shutdown. Any active connections or services will be interrupted." ::= { vlanSystemEntry 3 } vlanSystemOperStatus OBJECT-TYPE SYNTAX INTEGER { other(1), -- none of the following disabled(2), -- not running enabled(3), -- running pending-disable(4), -- shut-down in progress pending-enable(5), -- start-up in progress invalid-config(6) -- not running,invalid config } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the current operating condition of the VLAN instance." ::= { vlanSystemEntry 4 } vlanSystemOperTime OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the amount of time (# of time ticks) that this VLAN switch instance has been in its current operational state." ::= { vlanSystemEntry 5 } vlanSystemLastChange OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the last time a change was made to the configuration entry for this VLAN switch instance." ::= { vlanSystemEntry 6 } vlanSystemVersion OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the current revision level of the VLAN firmware for this VLAN switch instance." ::= { vlanSystemEntry 7 } vlanSystemMibRev OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Indicates in textual format the current revision level of the Cabletron VLAN MIB implemeted by the agent for this VLAN switch instance." ::= { vlanSystemEntry 8 } vlanSystemAgentIP OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "IP Address of VLAN Manager who owns this switch." ::= { vlanSystemEntry 9 } vlanSystemDomainName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Indicates domain name" ::= { vlanSystemEntry 10 } vlanSystemPollCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of polls" ::= { vlanSystemEntry 11 } vlanSystemFirstPollTime OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "System time when first polled" ::= { vlanSystemEntry 12 } vlanSystemLastPollTime OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "Last time polled" ::= { vlanSystemEntry 13 } vlanSystemPriorPollTime OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "Poll time one before the last poll time" ::= { vlanSystemEntry 14 } vlanSystemDeltaPollTime OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "Time difference between last poll time and prior poll time" ::= { vlanSystemEntry 15 } -- vlanTestAPI vlanTestAPIVerb OBJECT-TYPE SYNTAX INTEGER { other(1), -- add-vlan(2), -- add a Vlan delete-vlan(3), -- delete a Vlan enable-vlan(4), -- enable a Vlan disable-vlan(5), -- disable a Vlan open-vlan(6), -- open a Vlan secure-vlan(7), -- secure a Vlan enable-vlan-port(8), -- enable a Vlan for a port disable-vlan-port(9), -- disable a Vlan for a port map-vlan-port(10), -- map a Vlan for a port unmap-vlan-port(11), -- unmap a Vlan for a port tap-vlan-port(12), -- unsupported untap-vlan-port(13), -- unsupported get-vlan-info(14), -- get Vlan info get-port-info(15), -- get port info fill-table(16), -- auto-configure Vlan attributes empty-table(17) -- auto-unconfigure Vlan attributes } ACCESS read-write STATUS mandatory DESCRIPTION "Specifies the action to be initiated as a result of setting this leaf." ::= { vlanTestAPI 1 } vlanTestAPIVlanName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Specifies the Virtual LAN to be acted upon." ::= { vlanTestAPI 2 } vlanTestAPIPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Specifies the Port to be acted upon." ::= { vlanTestAPI 3 } vlanTestAPIVlanId OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Specifies the ID." ::= { vlanTestAPI 5 } -- vlan testAPI Outout vlanTestAPIOutputTable OBJECT-TYPE SYNTAX SEQUENCE OF VlanTestAPIOutputEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains the output results of the VlanAPI action." ::= { vlanTestAPI 4 } vlanTestAPIOutputEntry OBJECT-TYPE SYNTAX VlanTestAPIOutputEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry specifies one output result of the VlanAPI action." INDEX { vlanTestAPIOutputIndex } ::= { vlanTestAPIOutputTable 1 } VlanTestAPIOutputEntry ::= SEQUENCE { vlanTestAPIOutputIndex INTEGER, vlanTestAPIOutputVlanName DisplayString, vlanTestAPIOutputUserCnt INTEGER, vlanTestAPIOutputStatus INTEGER, vlanTestAPIOutputPolicy INTEGER, vlanTestAPIOutputPort INTEGER, vlanTestAPIOutputMap INTEGER, vlanTestAPIOutputAble INTEGER, vlanTestAPIOutputTap INTEGER, vlanTestAPIOutputVlanId INTEGER } vlanTestAPIOutputIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The primary index to the VLAN Test API Output table." ::= { vlanTestAPIOutputEntry 1 } vlanTestAPIOutputVlanName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Specifies the Virtual LAN by name." ::= { vlanTestAPIOutputEntry 2 } vlanTestAPIOutputUserCnt OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Specifies the number of users on this Vlan." ::= { vlanTestAPIOutputEntry 3 } vlanTestAPIOutputStatus OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Specifies the operational state of this Vlan." ::= { vlanTestAPIOutputEntry 4 } vlanTestAPIOutputPolicy OBJECT-TYPE SYNTAX INTEGER { other(1), normal(2), secure(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Specifies the uni-cast policy of this Vlan." ::= { vlanTestAPIOutputEntry 5 } vlanTestAPIOutputPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Specifies the Vlan port." ::= { vlanTestAPIOutputEntry 6 } vlanTestAPIOutputMap OBJECT-TYPE SYNTAX INTEGER { other(1), unmapped(2), mapped(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Specifies whether the Vlan is mapped." ::= { vlanTestAPIOutputEntry 7 } vlanTestAPIOutputAble OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Specifies whether the Vlan is enabled." ::= { vlanTestAPIOutputEntry 8 } vlanTestAPIOutputTap OBJECT-TYPE SYNTAX INTEGER { other(1), untapped(2), tapped(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Specifies whether the Vlan is tapped." ::= { vlanTestAPIOutputEntry 9 } vlanTestAPIOutputVlanId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Specifies the Vlan Id." ::= { vlanTestAPIOutputEntry 10 } -- VLAN Count vlanCountAPITotal OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { vlanCountAPI 1 } vlanCountAPIAdmin OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { vlanCountAPI 2 } vlanCountAPIAutoreg OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { vlanCountAPI 3 } -- VlanAMR vlanAMRRulesTable OBJECT-TYPE SYNTAX SEQUENCE OF VlanAMRRulesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table displays the on/off status of each individual AMR Rule." ::= { vlanAMRRules 1 } vlanAMRRulesEntry OBJECT-TYPE SYNTAX VlanAMRRulesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { vlanAMRRulesRule } ::= { vlanAMRRulesTable 1 } VlanAMRRulesEntry ::= SEQUENCE { vlanAMRRulesRule INTEGER, vlanAMRRulesStatus INTEGER } vlanAMRRulesRule OBJECT-TYPE SYNTAX INTEGER { other(1), etherType(2), ipSubNet(3), netBIOS(4), ipxServer(5), appleTalk(6), decNET(7), vines(8), bpdu(9) } ACCESS read-only STATUS mandatory DESCRIPTION "Refers to the enumerated value corresponding to each AMR rule" ::= { vlanAMRRulesEntry 1 } vlanAMRRulesStatus OBJECT-TYPE SYNTAX INTEGER { -- off(0), on(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Displays whether the rule is currently on or off" ::= { vlanAMRRulesEntry 2 } -- AMR Stats -- This table displays miscellaneous stats about the state of AMR rule. vlanAMRStatsNumRulesEnabled OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Refers to the number of rules that are on in the AmrRules" ::= { vlanAMRStats 1 } vlanAMRStatsSingleMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "Displays the mask that is used with the IP-Subnet AMR rule" ::= { vlanAMRStats 2 } -- AMR Subnets -- This table displays miscellaneous stats about the state of AMR rule. vlanAMRSubnetsPrefix OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { vlanAMRSubnets 1 } vlanAMRSubnetsMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { vlanAMRSubnets 2 } -- vlanPortTable OBJECT-TYPE SYNTAX SEQUENCE OF VlanPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { vlanPort 1 } vlanPortEntry OBJECT-TYPE SYNTAX VlanPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { vlanPortPortNum } ::= { vlanPortTable 1 } VlanPortEntry ::= SEQUENCE { vlanPortPortNum INTEGER, vlanPortPortStatus INTEGER, vlanPortPortPolicy INTEGER, vlanPortVlanName DisplayString, vlanPortAdminStatus INTEGER, vlanPortUniPolicy INTEGER, vlanPortFloodPolicy INTEGER, vlanPortRouterPort INTEGER, vlanPortVlanId INTEGER, vlanPortRelayAgent IpAddress, vlanPortLayer3Learning INTEGER } vlanPortPortNum OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The primary index to the VlanPort table." ::= { vlanPortEntry 1 } vlanPortPortStatus OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { vlanPortEntry 2 } vlanPortPortPolicy OBJECT-TYPE SYNTAX INTEGER { other(1), normal(2), locked(3) } ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { vlanPortEntry 3 } vlanPortVlanName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { vlanPortEntry 4 } vlanPortAdminStatus OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { vlanPortEntry 5 } vlanPortUniPolicy OBJECT-TYPE SYNTAX INTEGER { other(1), open(2), secure(3) } ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { vlanPortEntry 6 } vlanPortFloodPolicy OBJECT-TYPE SYNTAX INTEGER { other(1), floodOn(2), floodOff(3) } ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { vlanPortEntry 7 } vlanPortRouterPort OBJECT-TYPE SYNTAX INTEGER { other(1), routerPort(2), noRouter(3) } ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { vlanPortEntry 8 } vlanPortVlanId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { vlanPortEntry 9 } vlanPortRelayAgent OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { vlanPortEntry 10 } vlanPortLayer3Learning OBJECT-TYPE SYNTAX INTEGER { other(1), enabled(2), disabed(3) } ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { vlanPortEntry 11 } END