| ctsmtmibRingSmtIndex |
.1.3.6.1.4.1.52.4.1.2.2.1.1.1 |
|
The value of the SMT index associated with this ring.
|
| ctsmtmibRingMacIndex |
.1.3.6.1.4.1.52.4.1.2.2.1.1.2 |
|
A unique value for each MAC within a given SMT.
|
| ctsmtmibRingNodeIndex |
.1.3.6.1.4.1.52.4.1.2.2.1.1.3 |
|
The index of the node on the ring in reverse token
flow order. It is sequential from 1 to n where n is
the number of nodes on the ring at a given time.
|
| ctsmtmibRingMacAddr |
.1.3.6.1.4.1.52.4.1.2.2.1.1.4 |
|
A canonical representation of the MAC address of the
node.
|
| ctsmtmibRingUpStreamAddr |
.1.3.6.1.4.1.52.4.1.2.2.1.1.5 |
|
This is a canonical representation of the upstream
neighbor's address. The upstream neighbor is the last
MAC to receive the token before this MAC. Unknown
addresses should be specified as 00-00-F8-00-00-00.
|
| ctsmtmibRingNodeClass |
.1.3.6.1.4.1.52.4.1.2.2.1.1.6 |
|
Reports if the node is a station or a concentrator.
|
| ctsmtmibRingMacCount |
.1.3.6.1.4.1.52.4.1.2.2.1.1.7 |
|
The number of MACs on this FDDI node.
|
| ctsmtmibRingNonMasterCount |
.1.3.6.1.4.1.52.4.1.2.2.1.1.8 |
|
The sum of all A ports, B ports, and S ports on this
node.
|
| ctsmtmibRingMasterCount |
.1.3.6.1.4.1.52.4.1.2.2.1.1.9 |
|
The number of master ports on this node.
|
| ctsmtmibRingTopology |
.1.3.6.1.4.1.52.4.1.2.2.1.1.10 |
|
A bit mapped representation of the current state of
the node.
if state: Add 2**n where n =
Wrapped Node 0
Unattached Concentrator 1
A-A Twisted Ring 2
B-B Twisted Ring 3
Rooted Station 4
SRF Supported 5
where
Wrapped Node: is set when the node's cf-state is
Wrap-A, Wrap-B, Wrap-C, or Wrap-AB.
Unattached Concentrator: is set when a concentrator
has no active A, B, or S ports.
A-A Twisted Ring: is set when this node's A port is
connected to another A port.
B-B Twisted Ring: is set when this node's B port is
connected to another B port.
Rooted Station: is a station with ports A, B and S,
not active in tree mode.
SRF Supported: This node adheres to the status
reporting frame protocol.
|
| ctsmtmibRingDuplicate |
.1.3.6.1.4.1.52.4.1.2.2.1.1.11 |
|
A bit mapped representation of duplicate address
information.
if State: Add 2**n where n=
My Duplicate: 0
UNA Duplicate: 1
where
My Duplicate: This node determines that it's MAC
address is same as the MAC address for another
node on the ring.
UNA Duplicate: The upstream neighbor of this node
has determined that its's MAC address is same as
the MAC address for another node on the ring.
|
| ctsmtmibMacSmtIndex |
.1.3.6.1.4.1.52.4.1.2.2.2.1.1 |
|
The value of the SMT Index associated with this MAC.
|
| ctsmtmibMacIndex |
.1.3.6.1.4.1.52.4.1.2.2.2.1.2 |
|
A unique value for each MAC within a given SMT.
|
| ctsmtmibMacNifTxCts |
.1.3.6.1.4.1.52.4.1.2.2.2.1.3 |
|
The count of Neighborhood Information frames
transmitted by the MAC.
|
| ctsmtmibMacNifRxCts |
.1.3.6.1.4.1.52.4.1.2.2.2.1.4 |
|
The count of Neighborhood Information frames received
by the MAC.
|
| ctsmtmibMacSifTxCts |
.1.3.6.1.4.1.52.4.1.2.2.2.1.5 |
|
The count of Status Information frames transmitted by
the MAC.
|
| ctsmtmibMacSifRxCts |
.1.3.6.1.4.1.52.4.1.2.2.2.1.6 |
|
The count of Status Information Frames received by
the MAC.
|
| ctsmtmibMacEcfTxCts |
.1.3.6.1.4.1.52.4.1.2.2.2.1.7 |
|
The count of Echo Frames transmitted by the MAC.
|
| ctsmtmibMacEcfRxCts |
.1.3.6.1.4.1.52.4.1.2.2.2.1.8 |
|
The count of Echo Frames received by the MAC.
|
| ctsmtmibMacPmfTxCts |
.1.3.6.1.4.1.52.4.1.2.2.2.1.9 |
|
The count of Parameter Management Frames transmitted
by the MAC.
|
| ctsmtmibMacPmfRxCts |
.1.3.6.1.4.1.52.4.1.2.2.2.1.10 |
|
The count of Parameter Management Frames received by
the MAC.
|
| ctsmtmibMacRdfTxCts |
.1.3.6.1.4.1.52.4.1.2.2.2.1.11 |
|
The count of Request Denied Frames transmitted by the
MAC.
|
| ctsmtmibMacRdfRxCts |
.1.3.6.1.4.1.52.4.1.2.2.2.1.12 |
|
The count of Request Denied Frames received by the MAC.
|
| ctsmtmibMacRingOpCts |
.1.3.6.1.4.1.52.4.1.2.2.2.1.13 |
|
The count of the number of times the ring has entered
'Ring Operational' state from the 'Ring Not Operational'
state.
|
| ctsmtmibMacTxCts |
.1.3.6.1.4.1.52.4.1.2.2.2.1.14 |
|
A count that should as closely as possible match the
number of frames transmitted by this MAC.
|
| ctsmtmibMacRingMapUpdateCts |
.1.3.6.1.4.1.52.4.1.2.2.2.1.15 |
|
The count of the number of times the ring map table has
been updated.
|
| ctsmtmibMacAutoNegotiation |
.1.3.6.1.4.1.52.4.1.2.2.2.1.16 |
|
Indicates whether the station has auto-negotiation
enabled or disabled.
|
| ctsmtmibAttachmentSMTIndex |
.1.3.6.1.4.1.52.4.1.2.2.4.1.1 |
|
The value of the SMT index associated with this
Attachment.
|
| ctsmtmibAttachmentIndex |
.1.3.6.1.4.1.52.4.1.2.2.4.1.2 |
|
A unique value for each Attachment on a given SMT.
|
| ctsmtmibAttachmentClass |
.1.3.6.1.4.1.52.4.1.2.2.4.1.3 |
|
The Attachment class. This represents a PORT or a pair
of PORTs plus the associated optional optical bypass
that are managed as a functional unit. The PORT
associations are the following unit.
single-attachment - S Ports
dual-attachment - A/B Port pairs
concentrator - M Ports
|
| ctsmtmibAttachmentOpticalBypassPresent |
.1.3.6.1.4.1.52.4.1.2.2.4.1.4 |
|
The value of this is false for 'single-attachment' .
Correct operation of CMT for single-attachments
requires that a bypass function must not loopback the
network side of the MIC, but only the node side.
|
| ctsmtmibAttachmentIMaxExpiration |
.1.3.6.1.4.1.52.4.1.2.2.4.1.5 |
|
I_Max (refer to ANSI SMT 9.4.4.2.1). Systems not
implementing optical bypass should return a value of
0. Else the value should be returned in the granularity
of 80ns.
|
| ctsmtmibAttachmentInsertedStatus |
.1.3.6.1.4.1.52.4.1.2.2.4.1.6 |
|
Indicates whether the attachment is currently inserted
in the node.
|
| ctsmtmibAttachmentInsertPolicy |
.1.3.6.1.4.1.52.4.1.2.2.4.1.7 |
|
Indicates the Insert Policy for this Attachment.
|
| ctsmtmibSmtIndex |
.1.3.6.1.4.1.52.4.1.2.2.5.1.3 |
|
Specifies the particular SMT entry.
|
| ctsmtmibSMTDualHomeStatus |
.1.3.6.1.4.1.52.4.1.2.2.5.1.1 |
|
Indicates the current dual homed link status for a given
SMT instance.
notDualHomed(1) - This SMT is not dual homed.
linkAorB(2) - Dual homed with link on A and no link
link on B, or link on B and no link
on A.
linkAandB(3) - Dual homed with link on A and B.
|
| ctsmtmibSMTDualHomeWrpLEDStatus |
.1.3.6.1.4.1.52.4.1.2.2.5.1.2 |
|
When on, the WRAP LED will be illuminated when
the node is in a dual homed configuration with link on the
A, B or both A and B ports. When off, the WRAP LED will not
be illuminated when the node is in a dual homed
configuration with link on A and B, but will be illuminated
when in a dual homed configuration with no link on A or B.
|
