ActiveXperts Network Monitor 2019##AdminFavorites

EVENT-ACTIONS-MIB by vendor Enterasys Networks Inc

EVENT-ACTIONS-MIB file content

The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.

Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.

Use ActiveXperts Network Monitor 2019 to import vendor-specific MIB files, inclusing EVENT-ACTIONS-MIB.


Vendor: Enterasys Networks Inc
Mib: EVENT-ACTIONS-MIB  [download]  [view objects]
Tool: ActiveXperts Network Monitor 2019 [download]    (ships with advanced SNMP/MIB tools)
EVENT-ACTIONS-MIB DEFINITIONS ::= BEGIN

--  event-actions-mib.txt
--  Revision: 1.03.01
--  Part Number:
--  Date: December 9, 1997

--  Cabletron Systems, Inc.
--  35 Industrial Way, P.O. Box 5005
--  Rochester, NH 03867-0505
--  (603) 332-9400
--  support@ctron.com

--  Cabletron Systems reserves the right to make changes in
--  specifications and other information contained in this document
--  without prior notice.  The reader should consult Cabletron Systems
--  to determine whether any such changes have been made.
--
--  In no event shall Cabletron Systems be liable for any incidental,
--  indirect, special, or consequential damages whatsoever (including
--  but not limited to lost profits) arising out of or related to this
--  document or the information contained in it, even if Cabletron
--  Systems has been advised of, known, or should have known, the
--  possibility of such damages.
--
--  Cabletron grants vendors, end-users, and other interested parties
--  a non-exclusive license to use this Specification in connection
--  with the management of Cabletron products.

--  Copyright August 95 Cabletron Systems


IMPORTS
        OBJECT-TYPE
                FROM RFC-1212
        ctActions
                FROM CTRON-MIB-NAMES
        DisplayString
                FROM RFC1213-MIB
        eventIndex
                FROM RMON-MIB;

        --  DisplayString ::= OCTET STRING
        --  This data type is used to model textual information taken from
        --  the NVT ASCII character set.  By convention, objects with this
        --  syntax, unless explicitly stated, are declared as having:
        --
        --  SIZE (0..255)

ctActionDefn    OBJECT IDENTIFIER ::= { ctActions 1 }

ctEventActionTable      OBJECT-TYPE
    SYNTAX      SEQUENCE OF CtEventActionEntry
    ACCESS      not-accessible
    STATUS      mandatory
    DESCRIPTION
        "This table defines actions that may take place when a given
        RMON event is triggered.  Where action is defined as a collection
        of snmp SET operations to defined objects.  A SET operation is
        defined by an OID and by a value.  It is assumed that the type
        of the object is an integer."
    ::= { ctActionDefn 1 }

ctEventActionEntry      OBJECT-TYPE
    SYNTAX      CtEventActionEntry
    ACCESS      not-accessible
    STATUS      mandatory
    DESCRIPTION
        "Describes a particular action, SET operation."
    INDEX { eventIndex, ctActionObjectBase }
    ::= { ctEventActionTable 1 }

CtEventActionEntry ::= SEQUENCE {
        ctActionObjectBase
                OBJECT IDENTIFIER,
        ctActionValue
                INTEGER,
        ctActionOperStatus
                INTEGER,
        ctActionAdminStatus
                INTEGER,
        ctActionDescription
                DisplayString,
        ctActionOrder
                INTEGER
        }

ctActionObjectBase      OBJECT-TYPE
    SYNTAX      OBJECT IDENTIFIER
    ACCESS      read-only
    STATUS      mandatory
    DESCRIPTION
        "This defines the base OBJECT IDENTIFIER that will be used for the
        set operation."
::= { ctEventActionEntry 1 }

ctActionValue   OBJECT-TYPE
    SYNTAX      INTEGER
    ACCESS      read-write
    STATUS      mandatory
    DESCRIPTION
        "The value that will be used in the set operation that is defined
        by this action entry."
    ::= { ctEventActionEntry 2 }

ctActionOperStatus      OBJECT-TYPE
    SYNTAX      INTEGER {
        enable(1),
        disable(2),
        normal(4),      -- The action has executed with normal results
        error(5),       -- The action has executed and terminated in an error
        invalidExtension(6)
        }
    ACCESS      read-only
    STATUS      mandatory
    DESCRIPTION
        "The current operational status of the action.

        A value of enable(1) reflects that the action has been enabled but
        has never executed.

        A value of disable(2) reflects that the action has been disabled.

        A value of normal(4) indicates that the action has executed and
        has completed normally.

        A value of error(5) indicates that the action has executed but
        an error was detected during the operation.  Possible causes
        are bad value, bad type of value, object out of view, incorrect
        object extensions as defined in ctActionObjectTable.

        A value of invalidExtension(6) reflects that this action can not
        be executed since one or more of the defined extensions are in
        error."
::= { ctEventActionEntry 3 }

ctActionAdminStatus     OBJECT-TYPE
    SYNTAX      INTEGER {
        enable(1),
        disable(2),
        delete(3)
        }
    ACCESS      read-write
    STATUS      mandatory
    DESCRIPTION
        "Defines the desired state for this particular action entry.

        An action may be enabled by setting a value of enable(1)
        When enabled an action will execute whenever the specified event
        is generated.

        An action may be disabled by setting a value of disable(2).
        When disabled a given action will not be executed when the
        specified event is generated.  However the action remains
        valid to be enabled later."
    DEFVAL { enable }
::= { ctEventActionEntry 4 }

ctActionDescription OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (0..127))
    ACCESS      read-write
    STATUS      mandatory
    DESCRIPTION
        "This text string allows the end-user to provide a description 
        of the action; it must not contain anything but printable
        ASCII characters."
    ::= { ctEventActionEntry 5 }
        
ctActionOrder       OBJECT-TYPE
    SYNTAX      INTEGER(1..65535)
    ACCESS      read-write
    STATUS      mandatory
    DESCRIPTION
        "The value of this object controls the order of operations of actions
         associated with a given event. Actions with lower ctActionOrder value
         shall be executed first. It is not manditory that this object
         be set by the NMS. The default action on creation of an action entry
         is to create this object with a value of 1. All entries with the
         same ctActionOrder value will be executed in lexicographical
         order thus allowing for the preservation of the old order
         of execution."
    ::= { ctEventActionEntry 6 }

--This table was deprecated on March 7, 1997.

ctActionExtensionTable  OBJECT-TYPE
    SYNTAX      SEQUENCE OF CtActionExtensionEntry
    ACCESS      not-accessible
    STATUS      deprecated
    DESCRIPTION
        "This table defines extensions to the action table.  Extensions
        are in the form of get requests.  The value of which appended
        to the ctActionObjectBase. Values are appended in sequential order
        as defined by ctActionExtensionID."
    ::= { ctActionDefn 2 }

ctActionExtensionEntry  OBJECT-TYPE
    SYNTAX      CtActionExtensionEntry
    ACCESS      not-accessible
    STATUS      deprecated
    DESCRIPTION
        "Defines a particular action object extension entry."
    INDEX { ctActionObjectBase, ctActionExtensionID }
    ::= { ctActionExtensionTable 1 }

CtActionExtensionEntry ::= SEQUENCE {
        ctActionExtensionID
                INTEGER,
        ctActionExtensionOID
                OBJECT IDENTIFIER,
        ctActionExtensionValue
                INTEGER,
        ctActionExtensionOperStatus
                INTEGER,
        ctActionExtensionAdminStatus
                INTEGER
        }

ctActionExtensionID     OBJECT-TYPE
    SYNTAX      INTEGER
    ACCESS      read-only
    STATUS      deprecated
    DESCRIPTION
        "Uniquely identifies a specific action extension."
    ::= { ctActionExtensionEntry 1 }

ctActionExtensionOID    OBJECT-TYPE
    SYNTAX      OBJECT IDENTIFIER
    ACCESS      read-write
    STATUS      deprecated
    DESCRIPTION
        "Defines the OBJECT that will be read to get the value that
        will form the extension."
    ::= { ctActionExtensionEntry 2 }

ctActionExtensionValue  OBJECT-TYPE
    SYNTAX      INTEGER
    ACCESS      read-only
    STATUS      deprecated
    DESCRIPTION
        "The result of the read operation."
    ::= { ctActionExtensionEntry 3 }

ctActionExtensionOperStatus     OBJECT-TYPE
    SYNTAX      INTEGER {
        enable(1),
        disable(2),
        normal(4),      -- The action has executed with normal results
        error(5)        -- The action has executed and terminated in an error
        }
    ACCESS      read-only
    STATUS      deprecated
    DESCRIPTION
        "The current operational status of the action extension.

        A value of enable(1) reflects that the extension has been enabled but
        has never executed.

        A value of disable(2) reflects that the extension has been disabled.

        A value of normal(4) indicates that the extension has executed and
        has completed normally.

        A value of error(5) indicates that the extension has executed but
        an error was detected during the operation.  Possible causes
        are bad value, bad type of value, object out of view, incorrect
        object extensions as defined in ctActionExtensionTable."
::= { ctActionExtensionEntry 4 }

ctActionExtensionAdminStatus    OBJECT-TYPE
    SYNTAX      INTEGER {
        enable(1),
        disable(2),
        delete(3)
        }
    ACCESS      read-write
    STATUS      deprecated
    DESCRIPTION
        "Defines the desired state for this particular action 
        extension entry.

        An extension may be enabled by setting a value of enable(1)
        When enabled an extension will execute whenever the specified event
        is generated.

        An extension may be disabled by setting a value of disable(2).
        When disabled a given extension will not be executed when the
        specified event is generated.  However the extension remains
        valid to be enabled later."
    DEFVAL { enable }
::= { ctActionExtensionEntry 5 }

ctEventActionTableEntries       OBJECT-TYPE
    SYNTAX      INTEGER
    ACCESS      read-only
    STATUS      mandatory
    DESCRIPTION
        "The number of active entries in the ctEventAction Table."
    ::= { ctActionDefn 3 }

END