You are here:

MonitorTools.com > Technical documentation > SNMP > MIB > Enterasys Networks > ENTERASYS-8021X-EXTENSIONS-MIB
ActiveXperts Network Monitor 2019##AdminFavorites

ENTERASYS-8021X-EXTENSIONS-MIB by vendor Enterasys Networks

ENTERASYS-8021X-EXTENSIONS-MIB file content

The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.

Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.

Use ActiveXperts Network Monitor 2019 to import vendor-specific MIB files, inclusing ENTERASYS-8021X-EXTENSIONS-MIB.


Vendor: Enterasys Networks
Mib: ENTERASYS-8021X-EXTENSIONS-MIB  [download]  [view objects]
Tool: ActiveXperts Network Monitor 2019 [download]    (ships with advanced SNMP/MIB tools)
ENTERASYS-8021X-EXTENSIONS-MIB DEFINITIONS ::= BEGIN

--  enterasys-8021x-extensions-mib.txt
--
--  Part Number: <TBD>
--
--

--  This module provides authoritative definitions for Enterasys 
--  Networks' IEEE 802.1x extensions MIB.

--
--  This module will be extended, as needed.

--  Enterasys Networks reserves the right to make changes in this
--  specification and other information contained in this document
--  without prior notice.  The reader should consult Enterasys Networks
--  to determine whether any such changes have been made.
--
--  In no event shall Enterasys Networks be liable for any incidental,
--  indirect, special, or consequential damages whatsoever (including
--  but not limited to lost profits) arising out of or related to this
--  document or the information contained in it, even if Enterasys
--  Networks has been advised of, known, or should have known, the
--  possibility of such damages.
--
--  Enterasys Networks grants vendors, end-users, and other interested
--  parties a non-exclusive license to use this Specification in 
--  connection with the management of Enterasys Networks products.

--  Copyright February, 2002 Enterasys Networks, Inc.

IMPORTS  
    MODULE-IDENTITY, OBJECT-TYPE, Counter32, Counter64, Unsigned32,
    TimeTicks
        FROM SNMPv2-SMI
    TruthValue, MacAddress
        FROM SNMPv2-TC
    MODULE-COMPLIANCE, OBJECT-GROUP
        FROM SNMPv2-CONF
    InterfaceIndex      
        FROM IF-MIB
    SnmpAdminString 
        FROM SNMP-FRAMEWORK-MIB
    PaeControlledDirections, PaeControlledPortStatus,
    PaeControlledPortControl
        FROM IEEE8021-PAE-MIB
    etsysModules
        FROM ENTERASYS-MIB-NAMES;

etsys8021xExtensionsMIB MODULE-IDENTITY
    LAST-UPDATED "200203072010Z"  -- Thu Mar  7 20:10 GMT 2002
    ORGANIZATION "Enterasys Networks, Inc"
    CONTACT-INFO
        "Postal: Enterasys Networks
                 35 Industrial Way, P.O. Box 5005
                 Rochester, NH 03867-0505

         Phone:  +1 603 332 9400
         E-mail: support@enterasys.com
         WWW:    http://www.enterasys.com"

    DESCRIPTION
        "This MIB module defines a portion of the SNMP enterprise
         MIBs under Enterasys Networks' enterprise OID pertaining to 
         IEEE 802.1x authentication.

         This MIB is designed to supplement and be used in connection
         with the standard IEEE 802.1x MIB.  It provides a convenient
         way to retrieve authentication status for Supplicants living
         on shared-media ports that use station-based access control.
         (Here, a MAC address is a much more natural table index than
         a port or interface number.)"

    REVISION "200203072010Z"  -- Thu Mar  7 20:10 GMT 2002
    DESCRIPTION
        "The initial version of this MIB module."

    ::= { etsysModules 18 }


etsysDot1xExtensionsObjects
        OBJECT IDENTIFIER ::= { etsys8021xExtensionsMIB 1 }

-- ---------------------------------------------------------- --
-- Textual Conventions
-- ---------------------------------------------------------- --

-- ---------------------------------------------------------- --
-- Branches of the Enterasys 802.1x Extensions MIB
-- ---------------------------------------------------------- --

etsysDot1xSystemBranch
        OBJECT IDENTIFIER ::= { etsysDot1xExtensionsObjects 1 }

etsysDot1xAuthenticatorBranch
        OBJECT IDENTIFIER ::= { etsysDot1xExtensionsObjects 2 }

etsysDot1xSupplicantBranch
        OBJECT IDENTIFIER ::= { etsysDot1xExtensionsObjects 3 }

-- ---------------------------------------------------------- --
-- MIB Objects in the System Branch
-- ---------------------------------------------------------- --

-- This branch is a placeholder.

-- ---------------------------------------------------------- --
-- MIB Objects in the Authenticator PAE Branch
-- ---------------------------------------------------------- --

-- IEEE 802.1x MIB information for virtual Authenticator PAEs that
-- manage station-based, shared-media (e.g., wireless) Supplicants.
--
etsysDot1xAuthStationBranch
        OBJECT IDENTIFIER ::= { etsysDot1xAuthenticatorBranch 1 }

-- ---------------------------------------------------------- --
-- The Station-Based Authenticator PAE Table
-- ---------------------------------------------------------- --

etsysDot1xAuthStationTable OBJECT-TYPE
    SYNTAX        SEQUENCE OF EtsysDot1xAuthStationEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "A table that contains basic status information for the
         Authenticator PAEs associated with station-based virtual
         ports."
    ::= { etsysDot1xAuthStationBranch 1 }

etsysDot1xAuthStationEntry OBJECT-TYPE
    SYNTAX        EtsysDot1xAuthStationEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "Each conceptual row contains basic information about a
         station-based Authenticator PAE (such as a wireless access
         point Authenticator PAE that manages a particular station
         in a wireless workgroup).

         The most natural label for such a PAE is the MAC address
         of the Supplicant that it manages, and that, in some sense,
         called the PAE into existence.  So we index the table by
         the Supplicant MAC address."
    INDEX { etsysDot1xAuthStationAddress }
    ::= { etsysDot1xAuthStationTable 1 }

EtsysDot1xAuthStationEntry ::=
    SEQUENCE { 
     etsysDot1xAuthStationAddress             MacAddress,
     etsysDot1xAuthStationPaePort             InterfaceIndex,
     etsysDot1xAuthStationPaeState            INTEGER,
     etsysDot1xAuthStationBackendAuthState    INTEGER,
     etsysDot1xAuthStationUserName            SnmpAdminString
    }

etsysDot1xAuthStationAddress OBJECT-TYPE
    SYNTAX        MacAddress
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
            "The 48-bit IEEE media access control address of the
             Supplicant associated with the logical station-based
             access control port."
    ::= { etsysDot1xAuthStationEntry 1 }

etsysDot1xAuthStationPaePort OBJECT-TYPE
    SYNTAX        InterfaceIndex
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
            "The dot1xPaePortNumber of the shared-media port that
             is associated with this Authenticator PAE."
    ::= { etsysDot1xAuthStationEntry 2 }

etsysDot1xAuthStationPaeState OBJECT-TYPE
    SYNTAX        INTEGER {
                      initialize(1),
                      disconnected(2),
                      connecting(3),
                      authenticating(4),
                      authenticated(5),
                      aborting(6),
                      held(7),
                      forceAuth(8),
                      forceUnauth(9)
                  }
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
            "The current value of the Authenticator PAE state machine."
    REFERENCE  "IEEE 802.1x Section 9.4.1, Authenticator PAE state"
    ::= { etsysDot1xAuthStationEntry 3 }

etsysDot1xAuthStationBackendAuthState OBJECT-TYPE
    SYNTAX        INTEGER {
                      request(1),
                      response(2),
                      success(3),
                      fail(4),
                      timeout(5),
                      idle(6),
                      initialize(7)
                  }
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
            "The current state of the Backend Authentication state
             machine."
    REFERENCE  "IEEE 802.1x Section 9.4.1, Backend Authentication state"
    ::= { etsysDot1xAuthStationEntry 4 }

etsysDot1xAuthStationUserName OBJECT-TYPE
    SYNTAX        SnmpAdminString
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
               "The User-Name representing the identity of the
                Supplicant PAE."
    REFERENCE  "IEEE 802.1x Section 9.4.4, Session User Name"
    ::= { etsysDot1xAuthStationEntry 5 }


-- ---------------------------------------------------------- --
-- The Station-Based Authenticator Configuration Table
-- ---------------------------------------------------------- --

etsysDot1xAuthConfigTable OBJECT-TYPE
    SYNTAX        SEQUENCE OF EtsysDot1xAuthConfigEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "A table that contains configuration objects for the
         Authenticator PAE associated with each station-based virtual
         port.

         Station-based configuration management poses several rather
         major inconveniences, including a large number of rows, rows
         indexed by MAC address (rather than by user), and rows that
         come and go.

         Port-level and Authentication-Server-based management are
         quite a bit more convenient.  Thus, most of the objects in
         this table are read-only; a way to see how other settings
         have interacted if you need this information for
         troubleshooting purposes."
    ::= { etsysDot1xAuthStationBranch 2 }

etsysDot1xAuthConfigEntry OBJECT-TYPE
    SYNTAX        EtsysDot1xAuthConfigEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "Configuration information for a station-based Authenticator
         PAE."
    INDEX { etsysDot1xAuthStationAddress }
    ::= { etsysDot1xAuthConfigTable 1 }

EtsysDot1xAuthConfigEntry ::=
    SEQUENCE { 
     etsysDot1xAuthInitialize                 TruthValue,
     etsysDot1xAuthReauthenticate             TruthValue,
     etsysDot1xAuthAdminControlledDirections  PaeControlledDirections,
     etsysDot1xAuthOperControlledDirections   PaeControlledDirections,
     etsysDot1xAuthAuthControlledPortStatus   PaeControlledPortStatus,
     etsysDot1xAuthAuthControlledPortControl  PaeControlledPortControl,
     etsysDot1xAuthQuietPeriod                Unsigned32,
     etsysDot1xAuthTxPeriod                   Unsigned32,
     etsysDot1xAuthSuppTimeout                Unsigned32,
     etsysDot1xAuthServerTimeout              Unsigned32,
     etsysDot1xAuthMaxReq                     Unsigned32,
     etsysDot1xAuthReAuthPeriod               Unsigned32,
     etsysDot1xAuthReAuthEnabled              TruthValue,
     etsysDot1xAuthKeyTxEnabled               TruthValue
    }

etsysDot1xAuthInitialize OBJECT-TYPE
    SYNTAX        TruthValue
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION
                "The initialization control for this Authenticator PAE.
                 Setting this attribute to TRUE causes the PAE to be
                 initialized.  The attribute value reverts to FALSE
                 once initialization has completed."
    REFERENCE      "IEEE 802.1x Section 9.6.1.2, Initialize Port"
    ::= { etsysDot1xAuthConfigEntry 1 }

etsysDot1xAuthReauthenticate OBJECT-TYPE
    SYNTAX        TruthValue
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION
                "The reauthentication control for this Authenticator
                 PAE.  Setting this attribute to TRUE causes the
                 Authenticator PAE state machine to reauthenticate the
                 Supplicant.  Setting this attribute FALSE has no
                 effect.  This attribute always returns FALSE when it
                 is read."
    REFERENCE   "IEEE 802.1x Section 9.4.1.3 Reauthenticate"
    ::= { etsysDot1xAuthConfigEntry 2 }

etsysDot1xAuthAdminControlledDirections OBJECT-TYPE
    SYNTAX        PaeControlledDirections
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
               "The current value of the administrative controlled
                directions parameter for the virtual port."
    REFERENCE  "IEEE 802.1x Section 9.4.1, Admin Control Mode"
    ::= { etsysDot1xAuthConfigEntry 3 }

etsysDot1xAuthOperControlledDirections OBJECT-TYPE
    SYNTAX        PaeControlledDirections
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
               "The current value of the operational controlled
                directions parameter for the virtual port."
    REFERENCE  "IEEE 802.1x Section 9.4.1, Oper Control Mode"
    ::= { etsysDot1xAuthConfigEntry 4 }

etsysDot1xAuthAuthControlledPortStatus OBJECT-TYPE
    SYNTAX        PaeControlledPortStatus
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
               "The current value of the controlled Port
                status parameter for the virtual port."
    REFERENCE  "IEEE 802.1x Section 9.4.1, AuthControlledPortStatus"
    ::= { etsysDot1xAuthConfigEntry 5 }

etsysDot1xAuthAuthControlledPortControl OBJECT-TYPE
    SYNTAX        PaeControlledPortControl
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
               "The current value of the controlled Port
                control parameter for the virtual port."
    REFERENCE  "IEEE 802.1x Section 9.4.1, AuthControlledPortControl"
    ::= { etsysDot1xAuthConfigEntry 6 }

etsysDot1xAuthQuietPeriod OBJECT-TYPE
    SYNTAX        Unsigned32
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
               "The value, in seconds, of the quietPeriod constant
                currently in use by the Authenticator PAE state
                machine."
    REFERENCE  "IEEE 802.1x Section 9.4.1, quietPeriod"
    ::= { etsysDot1xAuthConfigEntry 7 }

etsysDot1xAuthTxPeriod OBJECT-TYPE
    SYNTAX        Unsigned32
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
               "The value, in seconds, of the txPeriod constant
                currently in use by the Authenticator PAE state
                machine."
    REFERENCE  "IEEE 802.1x Section 9.4.1, txPeriod"
    ::= { etsysDot1xAuthConfigEntry 8 }

etsysDot1xAuthSuppTimeout OBJECT-TYPE
    SYNTAX        Unsigned32
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
               "The value, in seconds, of the suppTimeout constant
                currently in use by the Backend Authentication state
                machine."
    REFERENCE  "IEEE 802.1x Section 9.4.1, suppTimeout"
    ::= { etsysDot1xAuthConfigEntry 9 }

etsysDot1xAuthServerTimeout OBJECT-TYPE
    SYNTAX        Unsigned32
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
               "The value, in seconds, of the serverTimeout constant
                currently in use by the Backend Authentication state
                machine."
    REFERENCE  "IEEE 802.1x Section 9.4.1, serverTimeout"
    ::= { etsysDot1xAuthConfigEntry 10 }

etsysDot1xAuthMaxReq OBJECT-TYPE
    SYNTAX        Unsigned32
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
               "The value of the maxReq constant currently in use by
                the Backend Authentication state machine."
    REFERENCE  "IEEE 802.1x Section 9.4.1, maxReq"
    ::= { etsysDot1xAuthConfigEntry 11 }

etsysDot1xAuthReAuthPeriod OBJECT-TYPE
    SYNTAX        Unsigned32
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
               "The value, in seconds, of the reAuthPeriod constant
                currently in use by the Reauthentication Timer state
                machine."
    REFERENCE  "IEEE 802.1x Section 9.4.1, reAuthPeriod"
    ::= { etsysDot1xAuthConfigEntry 12 }

etsysDot1xAuthReAuthEnabled OBJECT-TYPE
    SYNTAX        TruthValue
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
                "The enable/disable control used by the
                 Reauthentication Timer state machine (IEEE 802.1x
                 Section 8.5.5.1)."
    REFERENCE   "IEEE 802.1x Section 9.4.1, reAuthEnabled"
    DEFVAL { false }
    ::= { etsysDot1xAuthConfigEntry 13 }

etsysDot1xAuthKeyTxEnabled OBJECT-TYPE
    SYNTAX        TruthValue
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
                "The value of the keyTransmissionEnabled constant
                 currently in use by the Authenticator PAE state
                 machine."
    REFERENCE   "IEEE 802.1x Section 9.4.1, keyTransmissionEnabled"
    ::= { etsysDot1xAuthConfigEntry 14 }

-- ---------------------------------------------------------- --
-- The Authenticator Statistics Table
-- ---------------------------------------------------------- --

etsysDot1xAuthStatsTable OBJECT-TYPE
    SYNTAX SEQUENCE OF EtsysDot1xAuthStatsEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
                "A table that contains the statistics objects for the
                 Authenticator PAE associated with each Port.
                 An entry appears in this table for each port that may
                 authenticate access to itself."
    REFERENCE   "IEEE 802.1x Section 9.4.2 Authenticator Statistics"
    ::= { etsysDot1xAuthStationBranch 3 }

etsysDot1xAuthStatsEntry OBJECT-TYPE
    SYNTAX        EtsysDot1xAuthStatsEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
                "The statistics information for an Authenticator PAE."
    INDEX { etsysDot1xAuthStationAddress }
    ::= { etsysDot1xAuthStatsTable 1 }

EtsysDot1xAuthStatsEntry ::=
    SEQUENCE { etsysDot1xAuthEapolFramesRx            Counter32,
               etsysDot1xAuthEapolFramesTx            Counter32,
               etsysDot1xAuthEapolStartFramesRx       Counter32,
               etsysDot1xAuthEapolLogoffFramesRx      Counter32,
               etsysDot1xAuthEapolRespIdFramesRx      Counter32,
               etsysDot1xAuthEapolRespFramesRx        Counter32,
               etsysDot1xAuthEapolReqIdFramesTx       Counter32,
               etsysDot1xAuthEapolReqFramesTx         Counter32,
               etsysDot1xAuthInvalidEapolFramesRx     Counter32,
               etsysDot1xAuthEapLengthErrorFramesRx   Counter32,
               etsysDot1xAuthLastEapolFrameVersion    Unsigned32,
               etsysDot1xAuthLastEapolFrameSource     MacAddress
    }

etsysDot1xAuthEapolFramesRx OBJECT-TYPE
    SYNTAX Counter32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
                "The number of valid EAPOL frames of any type
                 that have been received by this Authenticator."
    REFERENCE   "IEEE 802.1x Section 9.4.2, EAPOL frames received"
    ::= { etsysDot1xAuthStatsEntry 1 }

etsysDot1xAuthEapolFramesTx OBJECT-TYPE
    SYNTAX Counter32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
                "The number of EAPOL frames of any type
                 that have been transmitted by this Authenticator."
    REFERENCE   "IEEE 802.1x Section 9.4.2, EAPOL frames transmitted"
    ::= { etsysDot1xAuthStatsEntry 2 }

etsysDot1xAuthEapolStartFramesRx OBJECT-TYPE
    SYNTAX Counter32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
                "The number of EAPOL Start frames that have
                 been received by this Authenticator."
    REFERENCE  "IEEE 802.1x Section 9.4.2, EAPOL Start frames received"
    ::= { etsysDot1xAuthStatsEntry 3 }

etsysDot1xAuthEapolLogoffFramesRx OBJECT-TYPE
    SYNTAX Counter32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
               "The number of EAPOL Logoff frames that have
                been received by this Authenticator."
    REFERENCE  "IEEE 802.1x Section 9.4.2, EAPOL Logoff frames received"
    ::= { etsysDot1xAuthStatsEntry 4 }

etsysDot1xAuthEapolRespIdFramesRx OBJECT-TYPE
    SYNTAX Counter32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
                "The number of EAP Resp/Id frames that have
                 been received by this Authenticator."
    REFERENCE   "IEEE 802.1x Section 9.4.2, EAPOL Resp/Id frames
                 received"
    ::= { etsysDot1xAuthStatsEntry 5 }

etsysDot1xAuthEapolRespFramesRx OBJECT-TYPE
    SYNTAX Counter32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
                "The number of valid EAP Response frames
                 (other than Resp/Id frames) that have been
                 received by this Authenticator."
    REFERENCE   "IEEE 802.1x Section 9.4.2, EAPOL Response frames
                 received"
    ::= { etsysDot1xAuthStatsEntry 6 }

etsysDot1xAuthEapolReqIdFramesTx OBJECT-TYPE
    SYNTAX Counter32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
                "The number of EAP Req/Id frames that have been
                 transmitted by this Authenticator."
    REFERENCE   "IEEE 802.1x Section 9.4.2, EAPOL Req/Id frames
                 transmitted"
    ::= { etsysDot1xAuthStatsEntry 7 }

etsysDot1xAuthEapolReqFramesTx OBJECT-TYPE
    SYNTAX Counter32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
                "The number of EAP Request frames
                 (other than Rq/Id frames) that have been
                  transmitted by this Authenticator."
    REFERENCE  "IEEE 802.1x Section 9.4.2, EAPOL Request frames
                transmitted"
    ::= { etsysDot1xAuthStatsEntry 8 }

etsysDot1xAuthInvalidEapolFramesRx OBJECT-TYPE
    SYNTAX Counter32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
                "The number of EAPOL frames that have been
                 received by this Authenticator in which the
                 frame type is not recognized."
    REFERENCE   "IEEE 802.1x Section 9.4.2, Invalid EAPOL frames
                 received"
    ::= { etsysDot1xAuthStatsEntry 9 }

etsysDot1xAuthEapLengthErrorFramesRx OBJECT-TYPE
    SYNTAX Counter32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
               "The number of EAPOL frames that have been received
                by this Authenticator in which the Packet Body
                Length field is invalid."
    REFERENCE  "IEEE 802.1x Section 9.4.2, EAP length error frames
                received"
    ::= { etsysDot1xAuthStatsEntry 10 }

etsysDot1xAuthLastEapolFrameVersion OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
                "The protocol version number carried in the
                 most recently received EAPOL frame."
    REFERENCE   "IEEE 802.1x Section 9.4.2, Last EAPOL frame version"
    ::= { etsysDot1xAuthStatsEntry 11 }

etsysDot1xAuthLastEapolFrameSource OBJECT-TYPE
    SYNTAX MacAddress
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
                "The source MAC address carried in the most 
                 recently received EAPOL frame."
    REFERENCE   "IEEE 802.1x Section 9.4.2, Last EAPOL frame source"
    ::= { etsysDot1xAuthStatsEntry 12 }

-- ---------------------------------------------------------- --
-- The Authenticator Diagnostics Table
-- ---------------------------------------------------------- --

etsysDot1xAuthDiagTable OBJECT-TYPE
    SYNTAX SEQUENCE OF EtsysDot1xAuthDiagEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
               "A table that contains the diagnostics objects for the
                Authenticator PAE associated with each Port.
                An entry appears in this table for each port that may
                authenticate access to itself."
    REFERENCE  "IEEE 802.1x Section 9.4.3 Authenticator Diagnostics"
    ::= { etsysDot1xAuthStationBranch 4 }

etsysDot1xAuthDiagEntry OBJECT-TYPE
    SYNTAX EtsysDot1xAuthDiagEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
                 "The diagnostics information for an Authenticator PAE."
    INDEX { etsysDot1xAuthStationAddress }
    ::= { etsysDot1xAuthDiagTable 1 }

EtsysDot1xAuthDiagEntry ::=
    SEQUENCE { 
        etsysDot1xAuthEntersConnecting                     Counter32,
        etsysDot1xAuthEapLogoffsWhileConnecting            Counter32,
        etsysDot1xAuthEntersAuthenticating                 Counter32,
        etsysDot1xAuthAuthSuccessWhileAuthenticating       Counter32,
        etsysDot1xAuthAuthTimeoutsWhileAuthenticating      Counter32,
        etsysDot1xAuthAuthFailWhileAuthenticating          Counter32,
        etsysDot1xAuthAuthReauthsWhileAuthenticating       Counter32,
        etsysDot1xAuthAuthEapStartsWhileAuthenticating     Counter32,
        etsysDot1xAuthAuthEapLogoffWhileAuthenticating     Counter32,
        etsysDot1xAuthAuthReauthsWhileAuthenticated        Counter32,
        etsysDot1xAuthAuthEapStartsWhileAuthenticated      Counter32,
        etsysDot1xAuthAuthEapLogoffWhileAuthenticated      Counter32,
        etsysDot1xAuthBackendResponses                     Counter32,
        etsysDot1xAuthBackendAccessChallenges              Counter32,
        etsysDot1xAuthBackendOtherRequestsToSupplicant     Counter32,
        etsysDot1xAuthBackendNonNakResponsesFromSupplicant Counter32,
        etsysDot1xAuthBackendAuthSuccesses                 Counter32,
        etsysDot1xAuthBackendAuthFails                     Counter32
    }

etsysDot1xAuthEntersConnecting OBJECT-TYPE
    SYNTAX Counter32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
                "Counts the number of times that the state machine
                 transitions to the CONNECTING state from any other
                 state."
    REFERENCE   "IEEE 802.1x Sections 9.4.2, 8.5.4.2.1"
    ::= { etsysDot1xAuthDiagEntry 1 }

etsysDot1xAuthEapLogoffsWhileConnecting OBJECT-TYPE
    SYNTAX Counter32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
                "Counts the number of times that the state machine
                 transitions from CONNECTING to DISCONNECTED as a result
                 of receiving an EAPOL-Logoff message."
    REFERENCE   "IEEE 802.1x Sections 9.4.2, 8.5.4.2.2"
    ::= { etsysDot1xAuthDiagEntry 2 }

etsysDot1xAuthEntersAuthenticating OBJECT-TYPE
    SYNTAX Counter32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
               "Counts the number of times that the state machine
                transitions from CONNECTING to AUTHENTICATING, as a
                result of an EAP-Response/Identity message being
                received from the Supplicant."
    REFERENCE  "IEEE 802.1x Sections 9.4.2, 8.5.4.2.3"
    ::= { etsysDot1xAuthDiagEntry 3 }

etsysDot1xAuthAuthSuccessWhileAuthenticating OBJECT-TYPE
    SYNTAX Counter32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
                "Counts the number of times that the state machine
                 transitions from AUTHENTICATING to AUTHENTICATED, as a
                 result of the Backend Authentication state machine
                 indicating successful authentication of the Supplicant
                 (authSuccess = TRUE)."
    REFERENCE   "IEEE 802.1x Sections 9.4.2, 8.5.4.2.4"
    ::= { etsysDot1xAuthDiagEntry 4 }

etsysDot1xAuthAuthTimeoutsWhileAuthenticating OBJECT-TYPE
    SYNTAX Counter32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
                "Counts the number of times that the state machine
                 transitions from AUTHENTICATING to ABORTING, as a
                 result of the Backend Authentication state machine
                 indicating authentication timeout (authTimeout =
                 TRUE)."
    REFERENCE   "IEEE 802.1x Sections 9.4.2, 8.5.4.2.5"
    ::= { etsysDot1xAuthDiagEntry 5 }

etsysDot1xAuthAuthFailWhileAuthenticating OBJECT-TYPE
    SYNTAX Counter32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
               "Counts the number of times that the state machine
                transitions from AUTHENTICATING to HELD, as a result
                of the Backend Authentication state machine indicating
                authentication failure (authFail = TRUE)."
    REFERENCE  "IEEE 802.1x Sections 9.4.2, 8.5.4.2.6"
    ::= { etsysDot1xAuthDiagEntry 6 }

etsysDot1xAuthAuthReauthsWhileAuthenticating OBJECT-TYPE
    SYNTAX Counter32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
                "Counts the number of times that the state machine
                 transitions from AUTHENTICATING to ABORTING, as a
                 result of a reauthentication request (reAuthenticate
                 = TRUE)."
    REFERENCE   "IEEE 802.1x Sections 9.4.2, 8.5.4.2.7"
    ::= { etsysDot1xAuthDiagEntry 7 }

etsysDot1xAuthAuthEapStartsWhileAuthenticating OBJECT-TYPE
    SYNTAX Counter32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
                "Counts the number of times that the state machine
                 transitions from AUTHENTICATING to ABORTING, as a
                 result of an EAPOL-Start message being received from
                 the Supplicant."
    REFERENCE   "IEEE 802.1x Sections 9.4.2, 8.5.4.2.8"
    ::= { etsysDot1xAuthDiagEntry 8 }

etsysDot1xAuthAuthEapLogoffWhileAuthenticating OBJECT-TYPE
    SYNTAX Counter32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
               "Counts the number of times that the state machine
                transitions from AUTHENTICATING to ABORTING, as a result
                of an EAPOL-Logoff message being received
                from the Supplicant."
    REFERENCE  "IEEE 802.1x Sections 9.4.2, 8.5.4.2.9"
    ::= { etsysDot1xAuthDiagEntry 9 }

etsysDot1xAuthAuthReauthsWhileAuthenticated OBJECT-TYPE
    SYNTAX Counter32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
               "Counts the number of times that the state machine
                transitions from AUTHENTICATED to CONNECTING, as a
                result of a reauthentication request
                (reAuthenticate = TRUE)."
    REFERENCE  "IEEE 802.1x Sections 9.4.2, 8.5.4.2.10"
    ::= { etsysDot1xAuthDiagEntry 10 }

etsysDot1xAuthAuthEapStartsWhileAuthenticated OBJECT-TYPE
    SYNTAX Counter32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
               "Counts the number of times that the state machine
                transitions from AUTHENTICATED to CONNECTING, as a
                result of an EAPOL-Start message being received from the
                Supplicant."
    REFERENCE "IEEE 802.1x Sections 9.4.2, 8.5.4.2.11"
    ::= { etsysDot1xAuthDiagEntry 11 }

etsysDot1xAuthAuthEapLogoffWhileAuthenticated OBJECT-TYPE
    SYNTAX Counter32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
               "Counts the number of times that the state machine
                transitions from AUTHENTICATED to DISCONNECTED, as a
                result of an EAPOL-Logoff message being received from
                the Supplicant."
    REFERENCE  "IEEE 802.1x Sections 9.4.2, 8.5.4.2.12"
    ::= { etsysDot1xAuthDiagEntry 12 }

etsysDot1xAuthBackendResponses OBJECT-TYPE
    SYNTAX Counter32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
               "Counts the number of times that the state machine sends
                an initial Access-Request packet to the Authentication
                server (i.e., executes sendRespToServer on entry to the
                RESPONSE state). Indicates that the Authenticator
                attempted communication with the Authentication Server."
    REFERENCE  "IEEE 802.1x Sections 9.4.2, 8.5.6.2.1"
    ::= { etsysDot1xAuthDiagEntry 13 }

etsysDot1xAuthBackendAccessChallenges OBJECT-TYPE
    SYNTAX Counter32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
               "Counts the number of times that the state machine
                receives an initial Access-Challenge packet from the
                Authentication server (i.e., aReq becomes TRUE,
                causing exit from the RESPONSE state). Indicates that
                the Authentication Server has communication with
                the Authenticator."
    REFERENCE  "IEEE 802.1x Sections 9.4.2, 8.5.6.2.2"
    ::= { etsysDot1xAuthDiagEntry 14 }

etsysDot1xAuthBackendOtherRequestsToSupplicant OBJECT-TYPE
    SYNTAX Counter32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
                "Counts the number of times that the state machine
                 sends an EAP-Request packet (other than an Identity,
                 Notification, Failure or Success message) to the
                 Supplicant (i.e., executes txReq on entry to the
                 REQUEST state). Indicates that the Authenticator chose
                 an EAP-method."
     REFERENCE "IEEE 802.1x Sections 9.4.2, 8.5.6.2.3"
::= { etsysDot1xAuthDiagEntry 15 }

etsysDot1xAuthBackendNonNakResponsesFromSupplicant OBJECT-TYPE
    SYNTAX Counter32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
                "Counts the number of times that the state machine
                 receives a response from the Supplicant to an initial
                 EAP-Request, and the response is something other than
                 EAP-NAK (i.e., rxResp becomes TRUE, causing the state
                 machine to transition from REQUEST to RESPONSE,
                 and the response is not an EAP-NAK). Indicates that
                 the Supplicant can respond to the Authenticator's
                 chosen EAP-method."
    REFERENCE "IEEE 802.1x Sections 9.4.2, 8.5.6.2.4"
    ::= { etsysDot1xAuthDiagEntry 16 }

etsysDot1xAuthBackendAuthSuccesses OBJECT-TYPE
    SYNTAX Counter32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
               "Counts the number of times that the state machine
                receives an EAP-Success message from the Authentication
                Server (i.e., aSuccess becomes TRUE, causing a
                transition from RESPONSE to SUCCESS). Indicates that
                the Supplicant has successfully authenticated to
                the Authentication Server."
    REFERENCE  "IEEE 802.1x Sections 9.4.2, 8.5.6.2.5"
    ::= { etsysDot1xAuthDiagEntry 17 }

etsysDot1xAuthBackendAuthFails OBJECT-TYPE
    SYNTAX Counter32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
               "Counts the number of times that the state machine
                receives an EAP-Failure message from the Authentication
                Server (i.e., aFail becomes TRUE, causing a transition
                from RESPONSE to FAIL). Indicates that the Supplicant
                has not authenticated to the Authentication Server."
    REFERENCE  "IEEE 802.1x Sections 9.4.2, 8.5.6.2.6"
    ::= { etsysDot1xAuthDiagEntry 18 }

-- ---------------------------------------------------------- --
-- The Authenticator Session Statistics Table
-- ---------------------------------------------------------- --

etsysDot1xAuthSessionStatsTable OBJECT-TYPE
    SYNTAX SEQUENCE OF EtsysDot1xAuthSessionStatsEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
                "A table that contains the session statistics objects
                 for the Authenticator PAE associated with each Port.
                 An entry appears in this table for each port that may
                 authenticate access to itself."
    REFERENCE  "IEEE 802.1x Section 9.4.4"
    ::= { etsysDot1xAuthStationBranch 5 }

etsysDot1xAuthSessionStatsEntry OBJECT-TYPE
    SYNTAX EtsysDot1xAuthSessionStatsEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
               "The session statistics information for an Authenticator
                PAE. This shows the current values being collected for
                each session that is still in progress, or the final
                values for the last valid session on each port where
                there is no session currently active."
    INDEX { etsysDot1xAuthStationAddress }
    ::= { etsysDot1xAuthSessionStatsTable 1 }

EtsysDot1xAuthSessionStatsEntry ::=
    SEQUENCE { etsysDot1xAuthSessionOctetsRx         Counter64,
               etsysDot1xAuthSessionOctetsTx         Counter64,
               etsysDot1xAuthSessionFramesRx         Counter32,
               etsysDot1xAuthSessionFramesTx         Counter32,
               etsysDot1xAuthSessionId               SnmpAdminString,
               etsysDot1xAuthSessionAuthenticMethod  INTEGER,
               etsysDot1xAuthSessionTime             TimeTicks,
               etsysDot1xAuthSessionTerminateCause   INTEGER
               -- Session name is in etsysDot1xAuthStationTable
    }

etsysDot1xAuthSessionOctetsRx OBJECT-TYPE
    SYNTAX Counter64
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
                "The number of octets received in user data
                 frames on this Port during the session."
    REFERENCE   "IEEE 802.1x Section 9.4.4, Session Octets Received"
    ::= { etsysDot1xAuthSessionStatsEntry 1 }

etsysDot1xAuthSessionOctetsTx OBJECT-TYPE
    SYNTAX Counter64
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The number of octets transmitted in user data
    frames on this Port during the session."
    REFERENCE  "IEEE 802.1x Section 9.4.4, Session Octets Transmitted"
    ::= { etsysDot1xAuthSessionStatsEntry 2 }

etsysDot1xAuthSessionFramesRx OBJECT-TYPE
    SYNTAX Counter32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
                "The number of user data frames received
                  on this Port during the session."
    REFERENCE   "IEEE 802.1x Section 9.4.4, Session Frames Received"
    ::= { etsysDot1xAuthSessionStatsEntry 3 }

etsysDot1xAuthSessionFramesTx OBJECT-TYPE
    SYNTAX Counter32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
               "The number of user data frames transmitted
                on this Port during the session."
    REFERENCE  "IEEE 802.1x Section 9.4.4, Session Frames Transmitted"
    ::= { etsysDot1xAuthSessionStatsEntry 4 }

etsysDot1xAuthSessionId OBJECT-TYPE
    SYNTAX SnmpAdminString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
                "A unique identifier for the session, in the
                 form of a printable ASCII string of at least
                 three characters."
    REFERENCE   "IEEE 802.1x Section 9.4.4, Session Identifier"
    ::= { etsysDot1xAuthSessionStatsEntry 5 }

etsysDot1xAuthSessionAuthenticMethod OBJECT-TYPE
    SYNTAX INTEGER { remoteAuthServer(1),
                     localAuthServer(2)
                   }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
              "The authentication method used to establish the session."
    REFERENCE "IEEE 802.1x Section 9.4.4, Session Authentication Method"
    ::= { etsysDot1xAuthSessionStatsEntry 6 }

etsysDot1xAuthSessionTime OBJECT-TYPE
    SYNTAX TimeTicks
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
               "The duration of the session in seconds."
    REFERENCE  "IEEE 802.1x Section 9.4.4, Session Time"
    ::= { etsysDot1xAuthSessionStatsEntry 7 }

etsysDot1xAuthSessionTerminateCause OBJECT-TYPE
    SYNTAX INTEGER { supplicantLogoff(1),
                     portFailure(2),
                     supplicantRestart(3),
                     reauthFailed(4),
                     authControlForceUnauth(5),
                     portReInit(6),
                     portAdminDisabled(7),
                     notTerminatedYet(999)
                   }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
                "The reason for the session termination."
    REFERENCE   "IEEE 802.1x Section 9.4.4, Session Terminate Cause"
    ::= { etsysDot1xAuthSessionStatsEntry 8 }


-- ---------------------------------------------------------- --
-- MIB Objects in the Supplicant Branch
-- ---------------------------------------------------------- --

-- This branch is a placeholder for any Supplicant-PAE-related
-- objects that might be added to this MIB in the future.
--
-- It is currently empty.


-- ---------------------------------------------------------- --
-- IEEE 802.1X MIB - Conformance Information
-- ---------------------------------------------------------- --

etsysDot1xConformance
    OBJECT IDENTIFIER ::= { etsys8021xExtensionsMIB 2 }

etsysDot1xGroups      OBJECT IDENTIFIER ::= { etsysDot1xConformance 1 }
etsysDot1xCompliances OBJECT IDENTIFIER ::= { etsysDot1xConformance 2 }

-- ---------------------------------------------------------- --
-- Units of conformance
-- ---------------------------------------------------------- --

etsysDot1xAuthStationGroup OBJECT-GROUP
    OBJECTS {
          etsysDot1xAuthStationPaePort,
          etsysDot1xAuthStationPaeState,
          etsysDot1xAuthStationBackendAuthState,
          etsysDot1xAuthStationUserName
        }
    STATUS current
    DESCRIPTION
            "A collection of objects providing basic status information
             about Authenticator PAEs running on ports that use station-
             based access control."
    ::= { etsysDot1xGroups 1 }

etsysDot1xAuthConfigGroup OBJECT-GROUP
    OBJECTS {
           etsysDot1xAuthInitialize,
           etsysDot1xAuthReauthenticate,
           etsysDot1xAuthAdminControlledDirections,
           etsysDot1xAuthOperControlledDirections,
           etsysDot1xAuthAuthControlledPortStatus,
           etsysDot1xAuthAuthControlledPortControl,
           etsysDot1xAuthQuietPeriod,
           etsysDot1xAuthTxPeriod,
           etsysDot1xAuthSuppTimeout,
           etsysDot1xAuthServerTimeout,
           etsysDot1xAuthMaxReq,
           etsysDot1xAuthReAuthPeriod,
           etsysDot1xAuthReAuthEnabled,
           etsysDot1xAuthKeyTxEnabled
       }
    STATUS current
    DESCRIPTION
            "A collection of objects providing configuration information
             about Authenticator PAEs running on ports that use station-
             based access control."
    ::= { etsysDot1xGroups 2 }

etsysDot1xAuthStatsGroup OBJECT-GROUP
    OBJECTS {
          etsysDot1xAuthEapolFramesRx,
          etsysDot1xAuthEapolFramesTx,
          etsysDot1xAuthEapolStartFramesRx,
          etsysDot1xAuthEapolLogoffFramesRx,
          etsysDot1xAuthEapolRespIdFramesRx,
          etsysDot1xAuthEapolRespFramesRx,
          etsysDot1xAuthEapolReqIdFramesTx,
          etsysDot1xAuthEapolReqFramesTx,
          etsysDot1xAuthInvalidEapolFramesRx,
          etsysDot1xAuthEapLengthErrorFramesRx,
          etsysDot1xAuthLastEapolFrameVersion,
          etsysDot1xAuthLastEapolFrameSource
       }
    STATUS current
    DESCRIPTION
            "A collection of objects providing statistics about
             Authenticator PAEs running on ports that use station-
             based access control."
    ::= { etsysDot1xGroups 3 }

etsysDot1xAuthDiagGroup OBJECT-GROUP
    OBJECTS {
          etsysDot1xAuthEntersConnecting,
          etsysDot1xAuthEapLogoffsWhileConnecting,
          etsysDot1xAuthEntersAuthenticating,
          etsysDot1xAuthAuthSuccessWhileAuthenticating,
          etsysDot1xAuthAuthTimeoutsWhileAuthenticating,
          etsysDot1xAuthAuthFailWhileAuthenticating,
          etsysDot1xAuthAuthReauthsWhileAuthenticating,
          etsysDot1xAuthAuthEapStartsWhileAuthenticating,
          etsysDot1xAuthAuthEapLogoffWhileAuthenticating,
          etsysDot1xAuthAuthReauthsWhileAuthenticated,
          etsysDot1xAuthAuthEapStartsWhileAuthenticated,
          etsysDot1xAuthAuthEapLogoffWhileAuthenticated,
          etsysDot1xAuthBackendResponses,
          etsysDot1xAuthBackendAccessChallenges,
          etsysDot1xAuthBackendOtherRequestsToSupplicant,
          etsysDot1xAuthBackendNonNakResponsesFromSupplicant,
          etsysDot1xAuthBackendAuthSuccesses,
          etsysDot1xAuthBackendAuthFails
    }
    STATUS current
    DESCRIPTION
            "A collection of objects providing diagnostic statistics
             about Authenticator PAEs running on ports that use station-
             based access control."
     ::= { etsysDot1xGroups 4 }

etsysDot1xAuthSessionStatsGroup OBJECT-GROUP
    OBJECTS {
           etsysDot1xAuthSessionOctetsRx,
           etsysDot1xAuthSessionOctetsTx,
           etsysDot1xAuthSessionFramesRx,
           etsysDot1xAuthSessionFramesTx,
           etsysDot1xAuthSessionId,
           etsysDot1xAuthSessionAuthenticMethod,
           etsysDot1xAuthSessionTime,
           etsysDot1xAuthSessionTerminateCause
        }
    STATUS current
    DESCRIPTION
            "A collection of objects providing statistics about the 
             current or last sessions for Authenticator PAEs running
             on ports that use station-based access control."
    ::= { etsysDot1xGroups 5 }


-- ---------------------------------------------------------- --
-- Compliance statements
-- ---------------------------------------------------------- --

etsysDot1xCompliance MODULE-COMPLIANCE
    STATUS current
    DESCRIPTION
            "The compliance statement for devices that support the
             Enterasys IEEE 802.1x extensions MIB."

MODULE

--  MANDATORY-GROUPS {}

    GROUP etsysDot1xAuthStationGroup
        DESCRIPTION
            "This group is conditionally mandatory for systems that
             support both station-based 802.1x access control and the
             Authenticator functions of the PAE, and that implement
             any of the objects in the etsysDot1xAuthStationBranch."

    GROUP etsysDot1xAuthConfigGroup
        DESCRIPTION
            "This group is conditionally mandatory for systems that
             support both station-based 802.1x access control and the
             Authenticator functions of the PAE, and that implement
             any of the objects in the etsysDot1xAuthStationBranch."

    GROUP etsysDot1xAuthStatsGroup
        DESCRIPTION
            "This group is conditionally mandatory for systems that
             support both station-based 802.1x access control and the
             Authenticator functions of the PAE, and that implement
             any of the objects in the etsysDot1xAuthStationBranch."

    GROUP etsysDot1xAuthDiagGroup
        DESCRIPTION
            "This group is optional."

    GROUP etsysDot1xAuthSessionStatsGroup
        DESCRIPTION
            "This group is optional."

    OBJECT         etsysDot1xAuthInitialize
    MIN-ACCESS     read-only
    DESCRIPTION    "Write access is not required."

    OBJECT         etsysDot1xAuthReauthenticate
    MIN-ACCESS     read-only
    DESCRIPTION    "Write access is not required."

::= { etsysDot1xCompliances 1 }

END