ENTERASYS-DIAGNOSTIC-MESSAGE-MIB device MIB details by Enterasys Networks
ENTERASYS-DIAGNOSTIC-MESSAGE-MIB file content
The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.
Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.
Use ActiveXperts Network Monitor 2024 to import vendor-specific MIB files, inclusing ENTERASYS-DIAGNOSTIC-MESSAGE-MIB.
Vendor: | Enterasys Networks |
---|---|
Mib: | ENTERASYS-DIAGNOSTIC-MESSAGE-MIB [download] [view objects] |
Tool: | ActiveXperts Network Monitor 2024 [download] (ships with advanced SNMP/MIB tools) |
ENTERASYS-DIAGNOSTIC-MESSAGE-MIB DEFINITIONS ::= BEGIN -- enterasys-diagnostic-message-mib.txt -- -- Part Number: -- -- -- This module provides authoritative definitions for Enterasys -- Networks' diagnostic message retrieval and monitoring OIDs. -- -- This module will be extended, as needed. -- Enterasys Networks reserves the right to make changes in this -- specification and other information contained in this document -- without prior notice. The reader should consult Enterasys Networks -- to determine whether any such changes have been made. -- -- In no event shall Enterasys Networks be liable for any incidental, -- indirect, special, or consequential damages whatsoever (including -- but not limited to lost profits) arising out of or related to this -- document or the information contained in it, even if Enterasys -- Networks has been advised of, known, or should have known, the -- possibility of such damages. -- -- Enterasys Networks grants vendors, end-users, and other interested -- parties a non-exclusive license to use this Specification in -- connection with the management of Enterasys Networks products. -- Copyright January, 2002-2003 Enterasys Networks, Inc. IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, Counter32 FROM SNMPv2-SMI DateAndTime, TEXTUAL-CONVENTION FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF SnmpAdminString FROM SNMP-FRAMEWORK-MIB etsysModules FROM ENTERASYS-MIB-NAMES; etsysDiagnosticMessageMIB MODULE-IDENTITY LAST-UPDATED "200304252048Z" -- Fri Apr 25 20:48 GMT 2003 ORGANIZATION "Enterasys Networks" CONTACT-INFO "Postal: Enterasys Networks 50 Minuteman Rd. Andover, MA 01810-1008 USA Phone: +1 978 684 1000 E-mail: support@enterasys.com WWW: http://www.enterasys.com" DESCRIPTION "This MIB module defines a portion of the SNMP enterprise MIBs under the Enterasys enterprise OID pertaining to the retrieval of diagnostic messages." REVISION "200301102117Z" -- Fri Jan 10 21:17 GMT 2003 DESCRIPTION "Added a textual convention to provide a display hint for the etsysDiagnosticMessageDetailsText object." REVISION "200206071428Z" -- Fri Jun 7 14:28 GMT 2002 DESCRIPTION "Added Enterasys copyright notice and corrected some text." REVISION "200112031951Z" -- Mon Dec 3 19:51 GMT 2001 DESCRIPTION "Removed the import of BITS from SNMPv2-SMI." REVISION "200108080000Z" DESCRIPTION "The initial version of this MIB module." ::= { etsysModules 13 } LongAdminString ::= TEXTUAL-CONVENTION DISPLAY-HINT "1024a" STATUS current DESCRIPTION "A size extended version of an SnmpAdminString as defined in RFC2571. " REFERENCE "RFC2571 (An Architecture for Describing SNMP Management Frameworks)" SYNTAX OCTET STRING (SIZE (0..1024)) -- ------------------------------------------------------------- -- etsysDiagnosticMessageMIB groupings -- ------------------------------------------------------------- etsysDiagnosticMessage OBJECT IDENTIFIER ::= { etsysDiagnosticMessageMIB 1 } etsysDiagnosticMessageDetails OBJECT IDENTIFIER ::= { etsysDiagnosticMessageMIB 2 } -- ------------------------------------------------------------- -- etsysDiagnosticMessages group -- ------------------------------------------------------------- etsysDiagnosticMessageCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of messages logged on this entity since the beginning of time. This value must be persistent. There should be no facility to clear this value." ::= { etsysDiagnosticMessage 1 } etsysDiagnosticMessageChanges OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of changes to the message log since the last reboot. Changes should include, clearing the message log, deleting a message, and the logging of new messages." ::= { etsysDiagnosticMessage 2 } etsysDiagnosticMessageTable OBJECT-TYPE SYNTAX SEQUENCE OF EtsysDiagnosticMessageEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists a summary of the diagnostic messages stored on the managed entity." ::= { etsysDiagnosticMessage 3 } etsysDiagnosticMessageEntry OBJECT-TYPE SYNTAX EtsysDiagnosticMessageEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry describing a particular diagnostic message. Every message that is stored in non-volatile memory is required to appear in this table." INDEX { etsysDiagnosticMessageIndex } ::= { etsysDiagnosticMessageTable 1 } EtsysDiagnosticMessageEntry ::= SEQUENCE { etsysDiagnosticMessageIndex Unsigned32, etsysDiagnosticMessageTime DateAndTime, etsysDiagnosticMessageType SnmpAdminString, etsysDiagnosticMessageSummary SnmpAdminString, etsysDiagnosticMessageFWRevision SnmpAdminString, etsysDiagnosticMessageStatus BITS } etsysDiagnosticMessageIndex OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A unique arbitrary identifier for this message. For stateless message log implementations it may be valid only while etsysDiagnosticMessageChanges remains unchanged." ::= { etsysDiagnosticMessageEntry 1 } etsysDiagnosticMessageTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The time and date that this message was stored." ::= { etsysDiagnosticMessageEntry 2 } etsysDiagnosticMessageType OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "A description of the type of message shown in this entry." ::= { etsysDiagnosticMessageEntry 3 } etsysDiagnosticMessageSummary OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(1..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "A brief summary of the diagnostic message." ::= { etsysDiagnosticMessageEntry 4 } etsysDiagnosticMessageFWRevision OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The string representing the version of firmware running on the the managed entity at the time the message was stored." ::= { etsysDiagnosticMessageEntry 5 } etsysDiagnosticMessageStatus OBJECT-TYPE SYNTAX BITS { etsysDiagnosticMessageBadChecksum(0) -- Message checksum failed during -- retrieval. May indicate corruption. } MAX-ACCESS read-only STATUS current DESCRIPTION "A list of attributes associated with this message. Generally these attributes would be considered exceptional, but could potentially be extended to indicate any number of conditions." ::= { etsysDiagnosticMessageEntry 6 } -- ------------------------------------------------------------- -- etsysDiagnosticMessageDetails group -- ------------------------------------------------------------- -- ------------------------------------------------------------- -- The etsysDiagnosticMessageDetailsTable allows the complete -- message to be retrieved from the managed entity via SNMP. -- ------------------------------------------------------------- etsysDiagnosticMessageDetailsTable OBJECT-TYPE SYNTAX SEQUENCE OF EtsysDiagnosticMessageDetailsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the complete diagnostic messages for entries in the etsysDiagnosticMessageSummaryTable. This allows a message of virtually unlimited length to be accessible via SNMP." ::= { etsysDiagnosticMessageDetails 1 } etsysDiagnosticMessageDetailsEntry OBJECT-TYPE SYNTAX EtsysDiagnosticMessageDetailsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry describing a particular fragment of a message." INDEX { etsysDiagnosticMessageIndex, etsysDiagnosticMessageDetailsIndex } ::= { etsysDiagnosticMessageDetailsTable 1 } EtsysDiagnosticMessageDetailsEntry ::= SEQUENCE { etsysDiagnosticMessageDetailsIndex Unsigned32, etsysDiagnosticMessageDetailsText LongAdminString, etsysDiagnosticMessageDetailsStatus BITS } etsysDiagnosticMessageDetailsIndex OBJECT-TYPE SYNTAX Unsigned32 (1..1024) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A unique arbitrary identifier for this message fragment. Ideally this index should have the values 1 - n, where 'n' is the number of message fragments. It, at a minimum, must be chosen such that the lexicographical ordering will allow the fragments to be assembled in the proper order." ::= { etsysDiagnosticMessageDetailsEntry 1 } etsysDiagnosticMessageDetailsText OBJECT-TYPE SYNTAX LongAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The text that makes up a fragment of a message." ::= { etsysDiagnosticMessageDetailsEntry 2 } etsysDiagnosticMessageDetailsStatus OBJECT-TYPE SYNTAX BITS { etsysDiagnosticMessageLastSegment(0) -- This is the last segment for this -- message index. } MAX-ACCESS read-only STATUS current DESCRIPTION "A list of attributes associated with this message segment." ::= { etsysDiagnosticMessageDetailsEntry 3 } -- ------------------------------------------------------------- -- Conformance Information -- ------------------------------------------------------------- etsysDiagnosticMessageConformance OBJECT IDENTIFIER ::= { etsysDiagnosticMessageMIB 3 } etsysDiagnosticMessageGroups OBJECT IDENTIFIER ::= { etsysDiagnosticMessageConformance 1 } etsysDiagnosticMessageCompliances OBJECT IDENTIFIER ::= { etsysDiagnosticMessageConformance 2 } -- ------------------------------------------------------------- -- units of conformance -- ------------------------------------------------------------- etsysDiagnosticMessageGroup OBJECT-GROUP OBJECTS { etsysDiagnosticMessageCount, etsysDiagnosticMessageChanges, etsysDiagnosticMessageTime, etsysDiagnosticMessageType, etsysDiagnosticMessageSummary, etsysDiagnosticMessageFWRevision, etsysDiagnosticMessageStatus, etsysDiagnosticMessageDetailsText, etsysDiagnosticMessageDetailsStatus } STATUS current DESCRIPTION "The basic etsysDiagnosticMessage group." ::= { etsysDiagnosticMessageGroups 1 } -- ------------------------------------------------------------- -- compliance statements -- ------------------------------------------------------------- etsysDiagnosticMessageCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for managed entities that support diagnostic message logs." MODULE MANDATORY-GROUPS { etsysDiagnosticMessageGroup } ::= { etsysDiagnosticMessageCompliances 1 } END