ENTERASYS-IMAGE-VALIDATION-MIB.mib object view, vendor Enterasys-Networks
Introduction
Most network devices and programs ship with so-called MIB files to describe the parameters and meanings (i.e.: friendly names) which are available for monitoring via SNMP.
ActiveXperts Network Monitor 2024 can import vendor-specific MIB files, so it can be used to monitor specific OID's (Object Identifiers).
This way, you can monitor your devices, computers, etc. by selecting your relevant OID's by name.
ActiveXperts Network Monitor 2024 can import MIB file ENTERASYS-IMAGE-VALIDATION-MIB and use it to monitor vendor specific OID's.
ENTERASYS-IMAGE-VALIDATION-MIB file content
Object view of ENTERASYS-IMAGE-VALIDATION-MIB:
| Scalar Object |
| etsysImageValidationEnable |
.1.3.6.1.4.1.5624.1.2.47.1.1.1 |
|
The enabled/disabled status of the New Image Validation
feature.
|
| etsysImageValidationPeriod |
.1.3.6.1.4.1.5624.1.2.47.1.1.2 |
|
The maximum number of seconds to monitor the new image
after it has booted. If any of the selected validation
operations are not successfully completed within this
interval, a reset will be issued to load the prior
operational image.
|
| etsysImageValidationOperations |
.1.3.6.1.4.1.5624.1.2.47.1.1.3 |
|
The operations that will be used to validate the new
image during the etsysImageValidationPeriod.
etsysImageValidationConfig -
The successful loading of the start-up configuration.
etsysImageValidationIcmp -
The successful reception of an ICMP echo reply from the
host specified in etsysImageValidationIcmpAddress.
etsysImageValidationSnmp -
The successful reception of an SNMP request from the
host specified in etsysImageValidationSnmpAddress.
If a host is not specified, an SNMP request from any
host will be considered a success.
If all of the selected validation operations are not
successfully completed within the etsysImageValidationPeriod,
a reset will be issued to load the prior operational image.
|
| etsysImageValidationIcmpAddressType |
.1.3.6.1.4.1.5624.1.2.47.1.1.4 |
|
The address type of the etsysImageValidationIcmpAddress
object. These objects are used when the ICMP echo reply
validation operation has been selected.
|
| etsysImageValidationIcmpAddress |
.1.3.6.1.4.1.5624.1.2.47.1.1.5 |
|
The address of the host that should respond to the ICMP echo
request. If an ICMP echo reply has NOT been received from
this host by the end of the etsysImageValidationPeriod, a reset
will be initiated to load the prior operational image.
|
| etsysImageValidationSnmpAddressType |
.1.3.6.1.4.1.5624.1.2.47.1.1.6 |
|
The address type of the etsysImageValidationSnmpAddress
object. These objects are used when the SNMP request
validation operation has been selected.
|
| etsysImageValidationSnmpAddress |
.1.3.6.1.4.1.5624.1.2.47.1.1.7 |
|
The address of the host that we should receive an SNMP
request from. If this object contains its default value
then an SNMP request from any station will be considered
a success. If an SNMP request has NOT been received from
this host by the end of the etsysImageValidationPeriod, a
reset will be initiated to load the prior operational image.
|
| Object Identifier |
| etsysImageValidationMIB |
.1.3.6.1.4.1.5624.1.2.47 |
|
This MIB module defines a portion of the SNMP MIB under
Enterasys Networks' enterprise OID pertaining to new
image validation and recovery.
|
| etsysImageValidationObjects |
.1.3.6.1.4.1.5624.1.2.47.1 |
| etsysImageValidationConfig |
.1.3.6.1.4.1.5624.1.2.47.1.1 |
| etsysImageValidationConformance |
.1.3.6.1.4.1.5624.1.2.47.2 |
| etsysImageValidationGroups |
.1.3.6.1.4.1.5624.1.2.47.2.1 |
| etsysImageValidationCompliances |
.1.3.6.1.4.1.5624.1.2.47.2.2 |
| Group |
| etsysImageValidationConfigGroup |
.1.3.6.1.4.1.5624.1.2.47.2.1.1 |
|
Objects that provide a means to validate a new image.
|
