ActiveXperts Network Monitor 2019##AdminFavorites

ENTERASYS-MAC-LOCKING-MIB.mib object view, vendor Enterasys-Networks

Introduction

Most network devices and programs ship with so-called MIB files to describe the parameters and meanings (i.e.: friendly names) which are available for monitoring via SNMP.
ActiveXperts Network Monitor 2019 can import vendor-specific MIB files, so it can be used to monitor specific OID's (Object Identifiers). This way, you can monitor your devices, computers, etc. by selecting your relevant OID's by name.

ActiveXperts Network Monitor 2019 can import MIB file ENTERASYS-MAC-LOCKING-MIB and use it to monitor vendor specific OID's.

ENTERASYS-MAC-LOCKING-MIB file content

Object view of ENTERASYS-MAC-LOCKING-MIB:

Scalar Object
etsysMACLockingSystemEnable .1.3.6.1.4.1.5624.1.2.21.1.1.1
This object is a configuration convenience. While disabled(2), all per port configuration is ignored, but changeable. When set to enabled(1), the per port configuration becomes active.
etsysMACLockingPortEntry .1.3.6.1.4.1.5624.1.2.21.1.2.1.1
Each conceptual row allows control over whether MAC locking is enabled for the port corresponding to the row. Similarly, each row provides control over whether violation traps are sent. Information in this table is persistent.
etsysMACLockingStaticStationEntry .1.3.6.1.4.1.5624.1.2.21.1.3.1.1
Each conceptual row contains a user specified locked MAC address.
etsysMACLockingStationEntry .1.3.6.1.4.1.5624.1.2.21.1.4.1.1
Each conceptual row contains a locked cause which describes how the MAC was locked on the port. If etsysMACLockingSystemEnable is Disabled(2), then this table will be empty. This table contains entries for those ports which have MAC locking enabled and have locked MACs.
Tabular Object
etsysMACLockingPort .1.3.6.1.4.1.5624.1.2.21.1.2.1.1.1
The interface number for this row.
etsysMACLockingEnable .1.3.6.1.4.1.5624.1.2.21.1.2.1.1.2
When set to enabled(1) any static entries currently created on this port become active and the first n MACs which are received on this port are locked, where n is equal to etsysMACLockingFirstArrivalStationsAllocated. When set to disabled(2), all entries in the etsysMACLockingStationTable are cleared, and the port forwards without regard to MAC locking.
etsysMACLockingViolationEnable .1.3.6.1.4.1.5624.1.2.21.1.2.1.1.3
When set to enabled(1), the agent issues violation traps for violations detected by the agent. Arrival of violation traps at the management station is not guaranteed and the trap generation rate is not required to match the violation detection rate. A best effort delivery is acceptable. When disabled(2), no traps are sent.
etsysMACLockingLastViolationAddress .1.3.6.1.4.1.5624.1.2.21.1.2.1.1.4
The last source MAC received on this port which was a violation. A violation is defined to be when the maximum number of firstArrival entries exists for this port in the etsysMACLockingStationTable and the source MAC address of the received packet differs from all entries found for this port in the etsysMACLockingStationTable.
etsysMACLockingFirstArrivalStationsAllowed .1.3.6.1.4.1.5624.1.2.21.1.2.1.1.5
The agent sets this number for the benefit of management to use when determining the permissible range of values for the etsysMACLockingFirstArrivalStationsAllocated object. The default value of this object is device dependent.
etsysMACLockingFirstArrivalStationsAllocated .1.3.6.1.4.1.5624.1.2.21.1.2.1.1.6
Management sets this number in the range of 0 to etsysMACLockingFirstArrivalStationsAllowed. This number limits the number of locked MACs on this port using the first arrival method. The default value of this object SHOULD be the same as the default value of etsysMACLockingFirstArrivalStationsAllowed.
etsysMACLockingStaticStationsAllowed .1.3.6.1.4.1.5624.1.2.21.1.2.1.1.7
The agent sets this number for the benefit of management to use when determining the permissible range of values for the etsysMACLockingStaticStationsAllocated object. The default value of this object is device dependent.
etsysMACLockingStaticStationsAllocated .1.3.6.1.4.1.5624.1.2.21.1.2.1.1.8
Management sets this number in the range of 0 to etsysMACLockingStaticStationsAllowed. This limits the number of statically provisioned, locked MACs on this port. The default value of this object SHOULD be the same as the default value of etsysMACLockingStaticStationsAllowed.
etsysMACLockingMoveFirstArrivalToStatic .1.3.6.1.4.1.5624.1.2.21.1.2.1.1.9
When set to true(1), moves First Arrival MACs locked on the port, in lexigraphical order, into Statically Locked MACs on the port. The move continues until all First Arrival MACs are moved or until the number of allowable static entries (etsysMACLockingStaticStationsAllocated) has been exhausted. If there is an insufficient number Static entries available to accommodate all the First Arrival MACs, then only the First Arrival MACs already moved to statically locked MACs will be static entries, the remaining First Arrival MACs will remain as First Arrival entries and a MIB_ERROR is returned. When read this object will always return false(2).
etsysMACLockingStaticStationsCount .1.3.6.1.4.1.5624.1.2.21.1.2.1.1.10
Returns the number of Statically Locked MACs currently locked on the port.
etsysMACLockingClearStaticStations .1.3.6.1.4.1.5624.1.2.21.1.2.1.1.11
When set to true(1), clears out all the Statically Locked MACs on this port. When read this object will always return false(2).
etsysMACLockingLockedAddress .1.3.6.1.4.1.5624.1.2.21.1.3.1.1.1
The MAC that has been locked to this port.
etsysMACLockingStaticEntryRowStatus .1.3.6.1.4.1.5624.1.2.21.1.3.1.1.2
The status column has six defined values: - 'active', which indicates that a row shall also exist or be created in etsysMACLockingStationTable with the same index and the object etsysMACLockingLockedEntryCause in that row shall be static(1); - 'notInService', which indicates the existence or causes the creation of a row in this table. However, no corresponding row shall exist or be created in etsysMACLockingStationTable; - 'notReady', will never be read in any row of this table since existence is the only requirement for this tables rows; - 'createAndGo', which causes a new row to be created in both this table and in the etsysMACLockingStationTable with the same index and the object etsysMACLockingLockedEntryCause shall have the value static(1); - 'createAndWait', which causes a new row to be created in this table. However, no corresponding row shall be created in etsysMACLockingStationTable; and, - 'destroy', which causes the agent to remove this tables row along with the corresponding row in etsysMACLockingStationTable.
etsysMACLockingLockedEntryCause .1.3.6.1.4.1.5624.1.2.21.1.4.1.1.1
When management statically provisions a MAC onto this port, then this object is set to static(1), otherwise if this MAC was dynamically locked, then this object is set to firstArrival(2).
Table
etsysMACLockingPortTable .1.3.6.1.4.1.5624.1.2.21.1.2.1
A table that provides for the configuration of MAC Locking for each port. Regardless of the value of etsysMACLockingSystemEnable, this table is automatically populated with one row per supported port. MAC Locking is not supported on media types whose addresses cannot be adequately represented by the MacAddress convention
etsysMACLockingStaticStationTable .1.3.6.1.4.1.5624.1.2.21.1.3.1
This table lists all statically locked MAC addresses for each port. When MAC locking is enabled on a port, all active rows in this table will appear in the etsysMACLockingStationTable with the object etsysMACLockingLockedEntryCause set to static(2). Rows in this table are persistent between resets.
etsysMACLockingStationTable .1.3.6.1.4.1.5624.1.2.21.1.4.1
This table lists any locked MAC address for each port along with their entry types. On each port in the system, MACs can be locked. For each MAC locked to a port, a row appears in this table. When MAC locking is enabled on a port, the first n packets received by the port has it's source MAC locked to the port and the locked cause displays firstArrival(2) The value n is equal to the etsysMACLockingFirstArrivalStationsAllocated object. Additionally, management may explicitly lock a MAC to a port by using the etsysMACLockingStationStaticTable. For each entry in the static table, a corresponding entry appears in this table with it's etsysMACLockingLockedEntryCause object set to static(1).
Trap
etsysMACLockingMACViolation .1.3.6.1.4.1.5624.1.2.21.1.0.1
If MAC Locking is globally enabled and specifically enabled for this port, then this trap is sent when a packet is received with a source MAC that differs from all the currently locked MACs for the port specified in this instance of the notification.
Object Identifier
etsysMACLockingMIB .1.3.6.1.4.1.5624.1.2.21
This MIB module defines the portion of the SNMP enterprise MIBs under Enterasys Networks' enterprise OID pertaining to MAC Locking. This MIB is designed to provide configuration and status objects pertaining to per port MAC Locking.
etsysMACLockingObjects .1.3.6.1.4.1.5624.1.2.21.1
etsysMACLockingSystemBranch .1.3.6.1.4.1.5624.1.2.21.1.1
etsysMACLockingPortConfigBranch .1.3.6.1.4.1.5624.1.2.21.1.2
etsysMACLockingStaticStationBranch .1.3.6.1.4.1.5624.1.2.21.1.3
etsysMACLockingStationBranch .1.3.6.1.4.1.5624.1.2.21.1.4
etsysMACLockingTrapBranch .1.3.6.1.4.1.5624.1.2.21.1.0
etsysMACLockingConformance .1.3.6.1.4.1.5624.1.2.21.2
etsysMACLockingGroups .1.3.6.1.4.1.5624.1.2.21.2.1
etsysMACLockingCompliances .1.3.6.1.4.1.5624.1.2.21.2.2
Group
etsysMACLockingSystemGroup .1.3.6.1.4.1.5624.1.2.21.2.1.1
A collection of objects providing global configuration for the MAC Locking feature.
etsysMACLockingPortGroup .1.3.6.1.4.1.5624.1.2.21.2.1.2
A collection of objects providing port based configuration and status of MAC Locking.
etsysMACLockingStationGroup .1.3.6.1.4.1.5624.1.2.21.2.1.3
A list of currently locked MACs.
etsysMACLockingStaticStationGroup .1.3.6.1.4.1.5624.1.2.21.2.1.4
A list of statically provisioned locked MACs. This group is mandatory if static MAC locking is supported, otherwise it is optional.