You are here:

MonitorTools.com > Technical documentation > SNMP > MIB > Enterasys Networks > ENTERASYS-RADIUS-AUTH-CLIENT-MIB
ActiveXperts Network Monitor 2019##AdminFavorites

ENTERASYS-RADIUS-AUTH-CLIENT-MIB by vendor Enterasys Networks

ENTERASYS-RADIUS-AUTH-CLIENT-MIB file content

The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.

Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.

Use ActiveXperts Network Monitor 2019 to import vendor-specific MIB files, inclusing ENTERASYS-RADIUS-AUTH-CLIENT-MIB.


Vendor: Enterasys Networks
Mib: ENTERASYS-RADIUS-AUTH-CLIENT-MIB  [download]  [view objects]
Tool: ActiveXperts Network Monitor 2019 [download]    (ships with advanced SNMP/MIB tools)
ENTERASYS-RADIUS-AUTH-CLIENT-MIB DEFINITIONS ::= BEGIN

--  enterasys-radius-auth-client-mib.txt
--
--  Part Number:
--
--

--  This module provides authoritative definitions for Enterasys
--  Networks' RADIUS client functionality.

--
--  This module will be extended, as needed.

--  Enterasys Networks reserves the right to make changes in this
--  specification and other information contained in this document
--  without prior notice.  The reader should consult Enterasys Networks
--  to determine whether any such changes have been made.
--
--  In no event shall Enterasys Networks be liable for any incidental,
--  indirect, special, or consequential damages whatsoever (including
--  but not limited to lost profits) arising out of or related to this
--  document or the information contained in it, even if Enterasys
--  Networks has been advised of, known, or should have known, the
--  possibility of such damages.
--
--  Enterasys Networks grants vendors, end-users, and other interested
--  parties a non-exclusive license to use this Specification in
--  connection with the management of Enterasys Networks products.

--  Copyright November, 2000-2003 Enterasys Networks, Inc.


IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE
        FROM SNMPv2-SMI
    MODULE-COMPLIANCE, OBJECT-GROUP
        FROM SNMPv2-CONF
    TruthValue, RowStatus
        FROM SNMPv2-TC
    InetAddressType, InetAddress
        FROM INET-ADDRESS-MIB
    etsysModules
        FROM ENTERASYS-MIB-NAMES;

etsysRadiusAuthClientMIB MODULE-IDENTITY
    LAST-UPDATED "200311061823Z"  -- Thu Nov  6 18:23 GMT 2003
    ORGANIZATION "Enterasys Networks, Inc"
    CONTACT-INFO
        "Postal:  Enterasys Networks
                  50 Minuteman Rd.
                  Andover, MA 01810-1008
                  USA
         Phone:   +1 978 684 1000
         E-mail:  support@enterasys.com
         WWW:     http://www.enterasys.com"

    DESCRIPTION
        "The Enterasys Networks Proprietary MIB module for entities 
         implementing the client side of the Remote Access Dialin
         User Service (RADIUS) authentication protocol (RFC2865).
       
         This MIB provides read-write access to configuration objects
         not provided in the standard RADIUS Authentication Client 
         MIB (RFC2618)."

    REVISION    "200311061823Z"  -- Thu Nov  6 18:23 GMT 2003
    DESCRIPTION "Updated the comments and format.  Changed the status
                 of the etsysRadiusAuthClientServerClearTime and
                 etsysRadiusAuthClientAuthType objects to deprecated."

    REVISION    "200201241557Z"  -- Thu Jan 24 15:57 GMT 2002
    DESCRIPTION "Changed { etsysRadiusAuthClientOID } to
                 { etsysModules 4 } so that the released MIB would work
                 with the NetSNMP stack that is currently being used by
                 NetSight."

    REVISION    "200011080000Z" -- 08 November 2000
    DESCRIPTION "Initial version"

    ::= { etsysModules 4 }


-- -------------------------------------------------------------
-- Branches of the Enterasys RADIUS Auth Client MIB
-- -------------------------------------------------------------

etsysRadiusAuthClientMIBObjects     OBJECT IDENTIFIER 
       ::= { etsysRadiusAuthClientMIB 1 }

-- -------------------------------------------------------------
-- RADIUS Auth Client Scalars
-- -------------------------------------------------------------

etsysRadiusAuthClientRetryTimeout OBJECT-TYPE
    SYNTAX         INTEGER (0..2147483647)
    UNITS          "seconds"
    MAX-ACCESS     read-write
    STATUS         current
    DESCRIPTION
        "The number of seconds to wait for a RADIUS Server to respond to
         a request.  Maintaining the value of this object across agent
         reboots is REQUIRED."
    ::= { etsysRadiusAuthClientMIBObjects 1 }

etsysRadiusAuthClientRetries OBJECT-TYPE
    SYNTAX         INTEGER (0..2147483647)
    MAX-ACCESS     read-write
    STATUS         current
    DESCRIPTION
        "The number of times to resend an authentication packet if a
         RADIUS Server does not respond to a request.  Maintaining the
         value of this object across agent reboots is REQUIRED."
    ::= { etsysRadiusAuthClientMIBObjects 2 }

etsysRadiusAuthClientEnable OBJECT-TYPE
    SYNTAX         INTEGER {
                       enable(1),
                       disable(2)
                   }
    MAX-ACCESS     read-write
    STATUS         current
    DESCRIPTION
        "Controls and indicates the operational state of the RADIUS
         client functionality.  Maintaining the value of this object
         across agent reboots is REQUIRED."
    ::= { etsysRadiusAuthClientMIBObjects 3 }

etsysRadiusAuthClientAuthType OBJECT-TYPE
    SYNTAX         INTEGER {
                       mac(1),
                       eapol(2)
                   }
    MAX-ACCESS     read-write
    STATUS         deprecated
    DESCRIPTION
        "This indicates which method is being used for 
         authentication.

         mac(1)   - indicates MAC address authentication
         eapol(2) - indicates EAPOL authentication

         This list of enumeration constants is subject to
         change. This parameter value is maintained across 
         system reboots."
   ::= { etsysRadiusAuthClientMIBObjects 4 }


-- -------------------------------------------------------------
-- RADIUS Auth Client Server Table
-- -------------------------------------------------------------

etsysRadiusAuthServerTable OBJECT-TYPE
    SYNTAX         SEQUENCE OF EtsysRadiusAuthServerEntry
    MAX-ACCESS     not-accessible
    STATUS         current
    DESCRIPTION
       "A list of RADIUS servers that this client may attempt to use."
    ::= { etsysRadiusAuthClientMIBObjects 5 }

etsysRadiusAuthServerEntry OBJECT-TYPE
    SYNTAX         EtsysRadiusAuthServerEntry
    MAX-ACCESS     not-accessible
    STATUS         current
    DESCRIPTION
       "A RADIUS server that this client may attempt to use."
    INDEX { etsysRadiusAuthServerIndex }
    ::= { etsysRadiusAuthServerTable 1 }

EtsysRadiusAuthServerEntry ::= SEQUENCE {
    etsysRadiusAuthServerIndex                        INTEGER,
    etsysRadiusAuthClientServerAddressType            InetAddressType,
    etsysRadiusAuthClientServerAddress                InetAddress,
    etsysRadiusAuthClientServerPortNumber             INTEGER,
    etsysRadiusAuthClientServerSecret                 OCTET STRING,
    etsysRadiusAuthClientServerSecretEntered          TruthValue,
    etsysRadiusAuthClientServerClearTime              INTEGER,
    etsysRadiusAuthClientServerStatus                 RowStatus
}

etsysRadiusAuthServerIndex OBJECT-TYPE
    SYNTAX         INTEGER (1..2147483647)
    MAX-ACCESS     not-accessible
    STATUS         current
    DESCRIPTION
        "A number uniquely identifying each conceptual row in the
         etsysRadiusAuthServerTable.  This value also indicates the
         relative priority of the servers.  The initial authentication
         attempt will be against the server with the lowest value of
         etsysRadiusAuthServerIndex and any successive attempt will
         be with the next higher value, and so on.

         Maintaining the value of etsysRadiusAuthServerIndex for all
         active(1) entries across agent reboots is REQUIRED."
    ::= { etsysRadiusAuthServerEntry 1 }

etsysRadiusAuthClientServerAddressType OBJECT-TYPE
    SYNTAX         InetAddressType
    MAX-ACCESS     read-create
    STATUS         current
    DESCRIPTION
        "This object specifies how etsysRadiusAuthClientServerAddress
         is encoded.  Support for all possible enumerations defined by
         InetAddressType is NOT REQUIRED."
    DEFVAL { ipv4 }
    ::= { etsysRadiusAuthServerEntry 2 }

etsysRadiusAuthClientServerAddress OBJECT-TYPE
    SYNTAX         InetAddress (SIZE(1..64))
    MAX-ACCESS     read-create
    STATUS         current
    DESCRIPTION
        "The encoded unicast IP address or hostname of a RADIUS
         server.  RADIUS requests will be sent to this address.
         If this address is a DNS hostname, then that hostname
         SHOULD be resolved into an IP address each time an
         authentication session is initialized."
    ::= { etsysRadiusAuthServerEntry 3 }

etsysRadiusAuthClientServerPortNumber  OBJECT-TYPE
    SYNTAX         INTEGER (0..65535)
    MAX-ACCESS     read-create
    STATUS         current
    DESCRIPTION
        "The UDP port number (0-65535) the client will use
         to send RADIUS requests to this server."
    DEFVAL { 1812 }
    ::= { etsysRadiusAuthServerEntry 4 }

etsysRadiusAuthClientServerSecret  OBJECT-TYPE
    SYNTAX         OCTET STRING (SIZE(0..255))
    MAX-ACCESS     read-create
    STATUS         current
    DESCRIPTION
        "This object is the secret shared between the RADIUS 
         authentication server and the RADIUS client.

         On a read operation this object MUST return a zero length
         string.

         Writing this object with a zero length string clears the
         secret."
    ::= { etsysRadiusAuthServerEntry 5 }

etsysRadiusAuthClientServerSecretEntered  OBJECT-TYPE
    SYNTAX         TruthValue
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
        "true(1)  - Indicates that etsysRadiusAuthClientServerSecret was
                    last set with some value other than the empty string.

         false(2) - Indicates that etsysRadiusAuthClientServerSecret has
                    never been set, or was last set to the empty string."
    ::= { etsysRadiusAuthServerEntry 6 }

etsysRadiusAuthClientServerClearTime OBJECT-TYPE
    SYNTAX         INTEGER (1..2147483647)
    UNITS          "seconds"
    MAX-ACCESS     read-create
    STATUS         deprecated
    DESCRIPTION   
        "The number of seconds elapsed since the counters were last
         cleared.  

         Writing the value zero will cause the servers counters to be
         cleared and the clear time will be set to zero.  Writing any
         value other than zero will have no effect."
    ::= { etsysRadiusAuthServerEntry 7 }

etsysRadiusAuthClientServerStatus OBJECT-TYPE
    SYNTAX         RowStatus
    MAX-ACCESS     read-create
    STATUS         current
    DESCRIPTION   
        "The row status of this conceptual row in the table.

         active
            - The server is available for performing RADIUS operations.
              Other writable leaves in this row MUST NOT be modified
              while the row is in the active state.

         notInService
            - The entry is fully configured but is not available for
              performing RADIUS  operations.  Conceptual rows with this
              status MAY be deleted at the discretion of the agent,
              at which time it will be treated as if destroy(6) was SET
              to this object.

         notReady
            - The entry exists in the agent, but is missing information
              necessary in order to be available for use by the managed
              device (i.e., one or more required columns in the
              conceptual row have not been instantiated);

         createAndGo
            - Not possible.

         createAndWait
            - Creates a new instance of a conceptual row, but does not
              make it available for use by the managed device.

         destroy
            - This will remove the conceptual row from the table and
              make it unavailable for RADIUS client operations.  This
              MUST also cause any persistent data related to this row
              to be removed from the system.

          Maintaining active(1) entries across agent reboots is
          REQUIRED."

    ::= { etsysRadiusAuthServerEntry 8 }


-- ------------------------------------
-- Conformance information
-- ------------------------------------

etsysRadiusAuthClientMIBConformance OBJECT IDENTIFIER
          ::= { etsysRadiusAuthClientMIB 2 }

etsysRadiusAuthClientMIBCompliances OBJECT IDENTIFIER
          ::= { etsysRadiusAuthClientMIBConformance 1 }

etsysRadiusAuthClientMIBGroups      OBJECT IDENTIFIER
          ::= { etsysRadiusAuthClientMIBConformance 2 }


-- ------------------------------------
-- Units of conformance
-- ------------------------------------

etsysRadiusAuthClientMIBGroup OBJECT-GROUP
    OBJECTS {
        etsysRadiusAuthClientRetryTimeout,
        etsysRadiusAuthClientRetries,
        etsysRadiusAuthClientEnable,
        etsysRadiusAuthClientAuthType,
        etsysRadiusAuthClientServerAddressType,
        etsysRadiusAuthClientServerAddress,
        etsysRadiusAuthClientServerPortNumber,
        etsysRadiusAuthClientServerSecret,
        etsysRadiusAuthClientServerSecretEntered,
        etsysRadiusAuthClientServerClearTime,
        etsysRadiusAuthClientServerStatus
    }
    STATUS  current
    DESCRIPTION
        "The basic collection of objects providing a proprietary
         extension to the standard RADIUS Client MIB. 

         This MIB provides read-write access to configuration objects
         not provided in the standard RADIUS Authentication Client 
         MIB (RFC2618)."
     ::= { etsysRadiusAuthClientMIBGroups 1 }


-- ------------------------------------
-- Compliance statements
-- ------------------------------------

etsysRadiusClientMIBCompliance MODULE-COMPLIANCE
    STATUS  current
    DESCRIPTION
        "The compliance statement for authentication clients
         implementing the RADIUS Authentication Client MIB."
    MODULE  -- this module
        MANDATORY-GROUPS { etsysRadiusAuthClientMIBGroup }

    ::= { etsysRadiusAuthClientMIBCompliances 1 }

END