AD | Application | AWS | Azure | Cloud | Database | Enterprise | Environmental | Event Log | File System | IoT | IT Service | Network/System | Infra | Performance | Protocol | SaaS | Security | Service Level | Storage | Linux | VMware | VoIP | Web | Wireless | SNMP

Crumbtrail

MonitorTools.com » Technical documentation » SNMP » MIB » Enterasys Networks » ENTERASYS-SERVICE-LEVEL-REPORTING-MIB

ENTERASYS-SERVICE-LEVEL-REPORTING-MIB device MIB details by Enterasys Networks

ENTERASYS-SERVICE-LEVEL-REPORTING-MIB file content

The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.

Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.

Use ActiveXperts Network Monitor 2024 to import vendor-specific MIB files, inclusing ENTERASYS-SERVICE-LEVEL-REPORTING-MIB.


Vendor: Enterasys Networks
Mib: ENTERASYS-SERVICE-LEVEL-REPORTING-MIB  [download]  [view objects]
Tool: ActiveXperts Network Monitor 2024 [download]    (ships with advanced SNMP/MIB tools)
ENTERASYS-SERVICE-LEVEL-REPORTING-MIB DEFINITIONS ::= BEGIN 

--  enterasys-service-level-reporting-mib.txt
--
--  Part Number:
--
--

--  This module provides authoritative definitions for Enterasys 
--  Networks' Service Level Reporting MIB.

--
--  This module will be extended, as needed.

--  Enterasys Networks reserves the right to make changes in this
--  specification and other information contained in this document
--  without prior notice.  The reader should consult Enterasys Networks
--  to determine whether any such changes have been made.
--
--  In no event shall Enterasys Networks be liable for any incidental,
--  indirect, special, or consequential damages whatsoever (including
--  but not limited to lost profits) arising out of or related to this
--  document or the information contained in it, even if Enterasys
--  Networks has been advised of, known, or should have known, the
--  possibility of such damages.
--
--  Enterasys Networks grants vendors, end-users, and other interested
--  parties a non-exclusive license to use this Specification in 
--  connection with the management of Enterasys Networks products.

--  Copyright Aug, 2003 Enterasys Networks, Inc.

 
IMPORTS 
    MODULE-IDENTITY, OBJECT-TYPE, Integer32 
        FROM SNMPv2-SMI 
    RowStatus, StorageType, TEXTUAL-CONVENTION
        FROM SNMPv2-TC 
    MODULE-COMPLIANCE, OBJECT-GROUP 
        FROM SNMPv2-CONF 
    SnmpAdminString 
        FROM SNMP-FRAMEWORK-MIB 
    InetAddressType, InetAddress  
        FROM INET-ADDRESS-MIB 
    etsysModules
         FROM ENTERASYS-MIB-NAMES;
 
etsysServiceLevelReportingMIB MODULE-IDENTITY 
    LAST-UPDATED "200311061515Z"  -- Thu Nov  6 15:15 GMT 2003
    ORGANIZATION "Enterasys Networks Inc."
    CONTACT-INFO
        "Postal:  Enterasys Networks
                  50 Minuteman Rd.
                  Andover, MA 01810-1008
                  USA
         Phone:   +1 978 684 1000
         E-mail:  support@enterasys.com
         WWW:     http://www.enterasys.com"

   DESCRIPTION   
       "This memo defines a portion of the Management Information Base 
       (MIB) for use with network management protocols in TCP/IP-based 
       internets. In particular, it specifies the objects used for 
       managing the results of the service level metrics measurements."

    REVISION    "200311061515Z"  -- Thu Nov  6 15:15 GMT 2003
    DESCRIPTION "Corrected the postal code in the CONTACT-INFO clause."

    REVISION    "200310241902Z"  -- Fri Oct 24 19:02 GMT 2003
    DESCRIPTION "Changed the name of the bit at position zero in the
                 EtsysSrvcLvlStandardMetrics textual convention from
                 'none' to 'reserved' and added a comment for it in 
                 the description clause."

    REVISION    "200310222332Z"  -- Wed Oct 22 23:32 GMT 2003
    DESCRIPTION "Initial version of this MIB module."
    ::= { etsysModules 39 }


-- -------------------------------------------------------------
-- Textual Conventions
-- -------------------------------------------------------------

EtsysSrvcLvlOwnerString ::= TEXTUAL-CONVENTION     
   STATUS       current 
   DESCRIPTION 
       "An OwnerString. The string length is limited to 32 octets."
   SYNTAX OCTET STRING (SIZE (0..32)) 
 
TimeUnit ::= TEXTUAL-CONVENTION     
   STATUS       current 
   DESCRIPTION 
       "A enumerated list of time units." 
   SYNTAX       INTEGER { 
       year(1), 
       month(2), 
       week(3), 
       day(4), 
       hour(5), 
       second(6), 
       millisecond(7), 
       microsecond(8), 
       nanosecond(9) 
   } 
 
EtsysSrvcLvlStandardMetrics ::= TEXTUAL-CONVENTION  
   STATUS      current 
   DESCRIPTION 
       " Each standard metric is identified below. In order to allow for
       several metrics to be calculated in a single measure, there is a
       need to describe in a bit string the metrics to be measured.  
       This textual convention defines a BITS construct that gathers in 
       a bit string a sequence of bits. The bit order corresponds to the
       order of the metric identifiers in the registry.  
       The first bit (most significant bit) of the string has the index 
       0. The index 1 corresponds to the first metric of the registry 
       (instantaneousUnidirectionalConnectivity ).  
        
       Example:   
       One-way-Delay(6) is identified as 6. One-way-Packet-Loss(12) is 
       as 12. A network measure performing both One-way-Delay(6) and 
       One-way-Packet-Loss(12) will be described as '0000001000001000'b,
       '208'B.         

       Below is a list of defined metrics:

       reserved (0)
           Setting this reserved bit has no effect.

       instantUnidirectionConnectivity (1)
           The identifier for the Type-P-Instantaneous-Unidirectional-
           Connectivity metric. 
           REFERENCE RFC2678, section 2. 
       
       instantBidirectionConnectivity (2)
           The identifier for the Type-P-Instantaneous-Bidirectional-
           Connectivity metric. 
           REFERENCE RFC2678, section 3. 
       
       intervalUnidirectionConnectivity (3)
           The identifier for the Type-P-Interval-Unidirectional-
           Connectivity metric. 
           REFERENCE RFC2678, section 4. 
       
       intervalBidirectionConnectivity (4)
           The identifier for the Type-P-Interval-Bidirectional-
           Connectivity metric. 
           REFERENCE RFC2678, section 5. 
       
       intervalTemporalConnectivity (5)
           The identifier for the Type-P1-P2-Interval-Temporal-
           Connectivity metric. 
           REFERENCE RFC2678, section 6. 
       
       oneWayDelay (6)
           The identifier for the Type-P-One-way-Delay metric. 
           REFERENCE RFC2679, section 3. 
       
       oneWayDelayPoissonStream (7)
           The identifier for the Type-P-One-way-Delay-Poisson-Stream 
           metric. 
           REFERENCE RFC2679, section 4. 
       
       oneWayDelayPercentile (8)
           The identifier for the Type-P-One-way-Delay-Percentile 
           metric. 
           REFERENCE RFC2679, section 5.1. 
       
       oneWayDelayMedian (9)
           The identifier for the Type-P-One-way-Delay-Median metric. 
           REFERENCE RFC2679, section 5.2. 
       
       oneWayDelayMinimum (10)
           The identifier for the Type-P-One-way-Delay-Minimum metric. 
           REFERENCE RFC2679, section 5.3. 
       
       oneWayDelayInversePercentile (11)
           The identifier for the Type-P-One-way-Delay-Inverse-
           Percentile metric.  
           REFERENCE RFC2679, section 5.4. 
       
       oneWayPacketLoss (12)
           The identifier for the Type-P-One-way-Packet-Loss metric. 
           REFERENCE RFC2680, section 2. 
       
       oneWayPacketLossPoissonStream (13)
           The identifier for the Type-P-One-way-Packet-Loss-Poisson-
           Stream metric. 
           REFERENCE RFC2680, section 3. 
       
       oneWayPacketLossAverage (14)
           The identifier for the Type-P-One-way-Packet-Loss-Average 
           metric. 
           REFERENCE RFC2680, section 4. 

       roundtripDelay (15)
           The identifier for the Type-P-Round-trip-Delay metric. 
           REFERENCE  section 2 of the rfc2681. 
       
       roundtripDelayPoissonStream (16)
           The identifier for the Type-P-Round-trip-Delay-Poisson-Stream
           metric. 
           REFERENCE RFC2681, section 4. 
       
       roundtripDelayPercentile (17)
           The identifier for the Type-P-Round-trip-Delay-Percentile 
           metric. 
           REFERENCE RFC2681, section 4.1. 
       
       roundtripDelayMedian (18)
           The identifier for the Type-P-Round-trip-Delay-Median metric.
           REFERENCE RFC2681, section 4.2. 
       
       roundtripDelayMinimum (19)
           The identifier for the Type-P-Round-trip-Delay-Minimum 
           metric. 
           REFERENCE RFC2681, section 4.3. 
       
       roundtripDelayInversePercentile (20)
           The identifier for the Type-P-Round-trip-Inverse-Percentile 
           metric. 
           REFERENCE RFC2681, section 4.4. 
       
       oneWayLossDistanceStream (21)
           The identifier for the Type-P-One-Way-Loss-Distance-Stream 
           metric. 
           REFERENCE  RFC3357, section 5.4.1. 
       
       oneWayLossPeriodStream (22)
           The identifier for the Type-P-One-Way-Loss-Period-Stream 
           metric. 
           REFERENCE  RFC3357, section 5.4.2. 
       
       oneWayLossNoticeableRate (23)
           The identifier for the Type-P-One-Way-Loss-Noticeable-Rate 
           metric. 
           REFERENCE  RFC3357, section 6.1. 
       
       oneWayLossPeriodTotal (24)
           The identifier for the Type-P-One-Way-Loss-Period-Total 
           metric. 
           REFERENCE  RFC3357, section 6.2. 
       
       oneWayLossPeriodLengths (25)
           The identifier for the Type-P-One-Way-Loss-Period-Lengths 
           metric. 
           REFERENCE  RFC3357, section 6.3. 
       
       oneWayInterLossPeriodLengths (26)
           The identifier for the Type-P-One-Way-Inter-Loss-Period-
           Lengths metric. 
           REFERENCE  RFC3357, section 6.4. 
       
       oneWayIpdv (27)
           The identifier for the Type-P-One-way-ipdv metric. 
           REFERENCE  RFC3393, section 2. 
       
       oneWayIpdvPoissonStream (28)
           The identifier for the Type-P-One-way-ipdv-Poisson-stream 
           metric. 
           REFERENCE  RFC3393, section 3. 
       
       oneWayIpdvPercentile (29)
         The identifier for the Type-P-One-way-ipdv-percentile metric. 
           REFERENCE  RFC3393, section 4.3. 
       
       oneWayIpdvInversePercentile (30)
           The identifier for the Type-P-One-way-ipdv-inverse-percentile
           metric. 
           REFERENCE  RFC3393, section 4.4. 
       
       oneWayIpdvJitter (31)
           The identifier for the Type-P-One-way-ipdv-jitter metric. 
           REFERENCE  RFC3393, section 4.5. 
       
       oneWayPeakToPeakIpdv (32)
           The identifier for the Type-P-One-way-peak-to-peak-ipdv 
           metric. 
           REFERENCE  RFC3393, section 4.6. 
       
       oneWayDelayPeriodicStream (33)
           The identifier for the Type-P-One-way-Delay-Periodic-Stream 
           metric. 
           REFERENCE  RFC3432, section 4. 

       roundtripDelayAverage (34)
           The identifier for the Type-P-Round-trip-Delay-Average 
           metric. 

       roundtripPacketLoss (35)
           The identifier for the Type-P-Round-trip-Packet-Loss metric. 

       roundtripPacketLossAverage (36)
           The identifier for the Type-P-Round-trip-Packet-Loss-Average 
           metric. 

       roundtripIpdv (37)
           The identifier for the Type-P-Round-trip-ipdv metric."  
   SYNTAX BITS {
     reserved (0),
     instantUnidirectionConnectivity (1),
     instantBidirectionConnectivity (2),
     intervalUnidirectionConnectivity (3),
     intervalBidirectionConnectivity (4),
     intervalTemporalConnectivity (5),
     oneWayDelay (6),
     oneWayDelayPoissonStream (7),
     oneWayDelayPercentile (8),
     oneWayDelayMedian (9),
     oneWayDelayMinimum (10),
     oneWayDelayInversePercentile (11),
     oneWayPacketLoss (12),
     oneWayPacketLossPoissonStream (13),
     oneWayPacketLossAverage (14),
     roundtripDelay (15),
     roundtripDelayPoissonStream (16),
     roundtripDelayPercentile (17),
     roundtripDelayMedian (18),
     roundtripDelayMinimum (19),
     roundtripDelayInversePercentile (20),
     oneWayLossDistanceStream (21),
     oneWayLossPeriodStream (22),
     oneWayLossNoticeableRate (23),
     oneWayLossPeriodTotal (24),
     oneWayLossPeriodLengths (25),
     oneWayInterLossPeriodLengths (26),
     oneWayIpdv (27),
     oneWayIpdvPoissonStream (28),
     oneWayIpdvPercentile (29),
     oneWayIpdvInversePercentile (30),
     oneWayIpdvJitter (31),
     oneWayPeakToPeakIpdv (32),
     oneWayDelayPeriodicStream (33),
     roundtripDelayAverage (34),
     roundtripPacketLoss (35),
     roundtripPacketLossAverage (36),
     roundtripIpdv (37)
   }
 
GMTTimeStamp ::= TEXTUAL-CONVENTION 
   STATUS       current 
   DESCRIPTION 
       "The value at which a specific occurrence happened. The specific 
       occurrence must be defined in the description of any object 
       defined using this type. 
        
       field  octets  contents                  range 
       -----  ------  --------                  ----- 
       1       1-4    second since 1 Jan 2000 0H00*    0..2^31 - 1 
       2       5-8    fractional part of the second*   0..2^32 - 1 
       * the value is in network-byte order 
        
       The timestamp format is directly inspired from the NTP timestamp 
       format. 
       It differs because it counts the second since 1 Jan 2000 0H00 
       instead of 1 Jan 1900 0H00. The most significant bit of the part 
       that represents the second is reserved. It will wrap in year 2068
       (The NTP timestamp will wrap in year 2036).  
        
       This bit is set to indicate if the fractional part of the second 
       contains a precision field and a synchronization field.  
        
       When this bit is not set the resolution is maximal. 
        
       The maximal resolution is close to 250 picoseconds.  
        
       The precision of the timestamp is provided in
       etsysSrvcLvlSystemClockResolution." 
   SYNTAX       OCTET STRING (SIZE (8)) 

TypeP  ::= TEXTUAL-CONVENTION     
   STATUS       current 
   DESCRIPTION 
       "This textual convention is a display string used to describe the
       protocol encapsulation list of a packet, and is used as the value
       of the SYNTAX clause for the type of the Src and Dst of a 
       measure. The RFC2895 specifies a macro named PROTOCOL-IDENTIFIER 
       for the definition of protocol identifiers, while its companion 
       document, the RFC2896 defines a set of protocol identifiers. 
        
       TypeP is defined as a display string. It consists of a list of 
       dot separated protocol names. Each protocol name has been 
       previously defined using the macro PROTOCOL-IDENTIFIER of the RFC
       2895. 
        
       Examples: 
       The RFC2896 defines the protocol identifiers 'ether2', 'ip', 
       'ipip4', 'udp', 'tcp', 'telnet'... 
        
       The TypeP of the source address corresponding to telnet is the 
       string 'ip.tcp.telnet'. 
        
       The TypeP of the source address corresponding to UDP packets sent
       in an IP tunnel is the string 'ip.ipip4.udp'. 
        
       Note:  
       A performance measure is active, so generally a TypeP value does
       not describe the link layer (i.e. ether2...). Valid Internet 
       packets are sent from Src to Dst. Then the choice of the link 
       layer relies on the Internet stack." 
   SYNTAX       OCTET STRING (SIZE (0..512)) 
 
TypePaddress ::= TEXTUAL-CONVENTION     
   DISPLAY-HINT "255a" 
   STATUS       current 
   DESCRIPTION 
       "This textual convention is a Display string used to describe the
       parameters of the protocol encapsulation list of a packet, 
       basically the address. 
        
       TypePaddress is defined as a display string. It consists in a 
       list of space separated parameter list. Each parameter in the 
       list corresponds to a parameter of a PROTOCOL-IDENTIFIER of the 
       TypeP. 
       Example: 
       The TypeP 'ip.ipip4' has 2 parameters. A valid TypePaddress value
       is '192.168.1.1 128.2.6.7'." 
   SYNTAX       OCTET STRING (SIZE (0..512)) 
 

-- -------------------------------------------------------------
-- MIB Objects
-- -------------------------------------------------------------

etsysSrvcLvlConfigObjects OBJECT IDENTIFIER
        ::= { etsysServiceLevelReportingMIB 1 }   
 
etsysSrvcLvlSystem  OBJECT IDENTIFIER
        ::= { etsysSrvcLvlConfigObjects 1 } 

etsysSrvcLvlOwners  OBJECT IDENTIFIER
        ::= { etsysSrvcLvlConfigObjects 2 } 

etsysSrvcLvlHistory OBJECT IDENTIFIER
        ::= { etsysSrvcLvlConfigObjects 3 } 

etsysSrvcLvlMeasure OBJECT IDENTIFIER
        ::= { etsysSrvcLvlConfigObjects 4 } 
 

-- -------------------------------------------------------------
-- etsysSrvcLvlSystem  Group 
-- -------------------------------------------------------------

etsysSrvcLvlSystemTime OBJECT-TYPE 
   SYNTAX GMTTimeStamp 
   MAX-ACCESS read-only 
   STATUS     current 
   DESCRIPTION 
       "The current time of the system."
   ::= { etsysSrvcLvlSystem  1 } 

etsysSrvcLvlSystemClockResolution OBJECT-TYPE
   SYNTAX     Integer32
   UNITS      "picoseconds"
   MAX-ACCESS read-only
   STATUS     current
   DESCRIPTION
      "etsysSrvcLvlSystemClockResolution provides the precision of the 
       clock used for the measures . The unit is the picosecond. For 
       example, the clock on an old Unix host might advance only once 
       every msec, and thus have a resolution of 1 msec. So its 
       resolution is 1,000,000,000 picosecond and the value of 
       etsysSrvcLvlSystemClockResolution is 1000000000."
   ::= { etsysSrvcLvlSystem 2 }

etsysSrvcLvlMetricTable OBJECT-TYPE 
   SYNTAX     SEQUENCE OF EtsysSrvcLvlMetricEntry 
   MAX-ACCESS not-accessible 
   STATUS     current 
   DESCRIPTION 
       "This table is mandatory. It describes the current 
       implementation. Each defined metric must be described 
       in the table.  
       etsysSrvcLvlMetricTable content is read only." 
   ::= { etsysSrvcLvlSystem 3 } 
 
etsysSrvcLvlMetricEntry OBJECT-TYPE 
   SYNTAX     EtsysSrvcLvlMetricEntry 
   MAX-ACCESS not-accessible 
   STATUS     current 
   DESCRIPTION 
       "An entry describes the static capabilities of a metric 
       implementation." 
   INDEX { etsysSrvcLvlMetricIndex } 
   ::= { etsysSrvcLvlMetricTable 1 } 
 
EtsysSrvcLvlMetricEntry ::= 
SEQUENCE { 
   etsysSrvcLvlMetricIndex           INTEGER, 
   etsysSrvcLvlMetricCapabilities    INTEGER, 
   etsysSrvcLvlMetricType            INTEGER, 
   etsysSrvcLvlMetricUnit            INTEGER, 
   etsysSrvcLvlMetricDescription     SnmpAdminString 
} 
 
etsysSrvcLvlMetricIndex OBJECT-TYPE 
     SYNTAX      INTEGER {
       instantUnidirectionConnectivity (1),
       instantBidirectionConnectivity (2),
       intervalUnidirectionConnectivity (3),
       intervalBidirectionConnectivity (4),
       intervalTemporalConnectivity (5),
       oneWayDelay (6),
       oneWayDelayPoissonStream (7),
       oneWayDelayPercentile (8),
       oneWayDelayMedian (9),
       oneWayDelayMinimum (10),
       oneWayDelayInversePercentile (11),
       oneWayPacketLoss (12),
       oneWayPacketLossPoissonStream (13),
       oneWayPacketLossAverage (14),
       roundtripDelay (15),
       roundtripDelayPoissonStream (16),
       roundtripDelayPercentile (17),
       roundtripDelayMedian (18),
       roundtripDelayMinimum (19),
       roundtripDelayInversePercentile (20),
       oneWayLossDistanceStream (21),
       oneWayLossPeriodStream (22),
       oneWayLossNoticeableRate (23),
       oneWayLossPeriodTotal (24),
       oneWayLossPeriodLengths (25),
       oneWayInterLossPeriodLengths (26),
       oneWayIpdv (27),
       oneWayIpdvPoissonStream (28),
       oneWayIpdvPercentile (29),
       oneWayIpdvInversePercentile (30),
       oneWayIpdvJitter (31),
       oneWayPeakToPeakIpdv (32),
       oneWayDelayPeriodicStream (33),
       roundtripDelayAverage (34),
       roundtripPacketLoss (35),
       roundtripPacketLossAverage (36),
       roundtripIpdv (37)
     }
   MAX-ACCESS not-accessible 
   STATUS     current 
   DESCRIPTION 
       "etsysSrvcLvlMetricIndex defines an unambiguous index for each 
       standardized metric. It identifies a metric. Its value is 
       defined above. This value is the same in any implementation
       of the ENTERASYS-SERVICE-LEVEL-REPORTING-MIB. See
       EtsysSrvcLvlStandardMetrics for description of the metrics.
        
       Example: 
       onewayPacketLossAverage is defined as the 14.
       Consequently the index of the metric onewayPacketLossAverage in 
       the EtsysSrvcLvlMetricTable will always be '14'" 
   ::= { etsysSrvcLvlMetricEntry 1 } 
 
etsysSrvcLvlMetricCapabilities OBJECT-TYPE 
   SYNTAX INTEGER { 
   notImplemented(0), 
   implemented(1) 
   } 
   MAX-ACCESS read-only 
   STATUS     current 
   DESCRIPTION 
       "A value of notImplemented implies the metric is not implemented.
       A value of implemented implies the metric is implemented."
   DEFVAL { implemented } 
   ::= { etsysSrvcLvlMetricEntry 2 } 
 
etsysSrvcLvlMetricType OBJECT-TYPE 
   SYNTAX INTEGER { 
   network(0), 
   aggregated(1) 
   } 
   MAX-ACCESS read-only 
   STATUS     current 
   DESCRIPTION 
       "Indicates the metric type, whether it is network or aggregated" 
   DEFVAL { aggregated } 
   ::= { etsysSrvcLvlMetricEntry 3 } 
 
etsysSrvcLvlMetricUnit OBJECT-TYPE 
   SYNTAX INTEGER { 
        noUnit(0), 
        second(1), 
        millisecond(2), 
        microsecond(3), 
        nanosecond(4), 
        percentage(5), 
        packet(6), 
        byte(7), 
        kilobyte(8), 
        megabyte(9) 
        } 
   MAX-ACCESS read-only 
   STATUS     current 
   DESCRIPTION 
       "The unit used in the current entity for the results of the 
       measurement of this metric." 
   ::= { etsysSrvcLvlMetricEntry 4 } 
 
etsysSrvcLvlMetricDescription OBJECT-TYPE 
   SYNTAX SnmpAdminString 
   MAX-ACCESS read-only 
   STATUS     current 
   DESCRIPTION 
       "A textual description of the metric implementation following 
       the exact name of this metric in the registry. For example: 
       oneWayDelay: text ." 
   ::= { etsysSrvcLvlMetricEntry 5 } 
 

-- -------------------------------------------------------------
-- etsysSrvcLvlOwners Group 
-- -------------------------------------------------------------

-- 
-- The etsysSrvcLvlOwners objects are responsible for managing 
-- the owners access to the measurements. 
--  

etsysSrvcLvlOwnersTable OBJECT-TYPE 
   SYNTAX     SEQUENCE OF EtsysSrvcLvlOwnersEntry 
   MAX-ACCESS not-accessible 
   STATUS     current 
   DESCRIPTION 
       "A management entity wishing to create and activate remote 
       EtsysSrvcLvl measurements in an agent must previously be 
       registered in the etsysSrvcLvlOwnersTable.  
       etsysSrvcLvlOwnersTable content is read-create. It contains at 
       least the owner 'monitor'."
   ::= { etsysSrvcLvlOwners 1 } 
 
etsysSrvcLvlOwnersEntry OBJECT-TYPE 
   SYNTAX     EtsysSrvcLvlOwnersEntry 
   MAX-ACCESS not-accessible 
   STATUS     current 
   DESCRIPTION 
       "The description of the resources granted to an SNMP application.
       For example, an instance of etsysSrvcLvlOwnersOwner with an 
       EtsysSrvcLvlOwnerString 'acme', which represents the 14th owner 
       created in etsysSrvcLvlOwnersTable would be named 
       etsysSrvcLvlOwnersEntryOwner.14. 
        
       Notes: 
        
       The etsysSrvcLvlOwnersIndex value is a local index managed 
       directly by the agent. The management application must poll to 
       get the next available index value. 
       It is not used in anyway in other tables." 
   INDEX { etsysSrvcLvlOwnersIndex } 
   ::= { etsysSrvcLvlOwnersTable 1 } 
 
EtsysSrvcLvlOwnersEntry ::= SEQUENCE { 
   etsysSrvcLvlOwnersIndex              Integer32, 
   etsysSrvcLvlOwnersOwner              EtsysSrvcLvlOwnerString, 
   etsysSrvcLvlOwnersGrantedMetrics     EtsysSrvcLvlStandardMetrics, 
   etsysSrvcLvlOwnersQuota              Integer32, 
   etsysSrvcLvlOwnersIpAddressType      InetAddressType, 
   etsysSrvcLvlOwnersIpAddress          InetAddress, 
   etsysSrvcLvlOwnersEmail              SnmpAdminString, 
   etsysSrvcLvlOwnersSMS                SnmpAdminString, 
   etsysSrvcLvlOwnersStatus             RowStatus 
} 
 
etsysSrvcLvlOwnersIndex OBJECT-TYPE 
   SYNTAX Integer32 (1.. 65535) 
   MAX-ACCESS not-accessible 
   STATUS     current 
   DESCRIPTION 
       "An arbitrary index that identifies an entry in the owners 
       table." 
   ::= { etsysSrvcLvlOwnersEntry 1 } 
 
etsysSrvcLvlOwnersOwner OBJECT-TYPE 
   SYNTAX     EtsysSrvcLvlOwnerString 
   MAX-ACCESS read-create 
   STATUS     current 
   DESCRIPTION 
       "The owner described by this entry." 
   ::= { etsysSrvcLvlOwnersEntry 2 } 
 
etsysSrvcLvlOwnersGrantedMetrics OBJECT-TYPE 
   SYNTAX     EtsysSrvcLvlStandardMetrics 
   MAX-ACCESS read-create 
   STATUS     current 
   DESCRIPTION 
       "Defines the metrics granted to an owner for which measurements 
       can be performed." 
   ::= { etsysSrvcLvlOwnersEntry 3 } 

etsysSrvcLvlOwnersQuota OBJECT-TYPE 
   SYNTAX     Integer32 
   MAX-ACCESS read-create 
   STATUS     current 
   DESCRIPTION 
       "The maximum number of records that this owner may have in the 
       history table."
   ::= { etsysSrvcLvlOwnersEntry 4 } 
 
etsysSrvcLvlOwnersIpAddressType OBJECT-TYPE 
   SYNTAX     InetAddressType  
   MAX-ACCESS read-create 
   STATUS     current 
   DESCRIPTION 
       "The IP address type of the management entity corresponding to 
       this owner. 
       InetAddressType is restricted to ipv4(1),ipv6(2)and dns(16)." 
   ::= { etsysSrvcLvlOwnersEntry 5 } 
 
etsysSrvcLvlOwnersIpAddress OBJECT-TYPE 
   SYNTAX     InetAddress  (SIZE  (1..128)) 
   MAX-ACCESS read-create 
   STATUS     current 
   DESCRIPTION 
       "The IP address of the management entity corresponding to this 
       owner." 
   ::= { etsysSrvcLvlOwnersEntry 6 } 
 
etsysSrvcLvlOwnersEmail OBJECT-TYPE 
   SYNTAX     SnmpAdminString 
   MAX-ACCESS read-create 
   STATUS     current 
   DESCRIPTION 
       "The email address of the management entity corresponding to this
       owner." 
   ::= { etsysSrvcLvlOwnersEntry 7 } 
 
etsysSrvcLvlOwnersSMS OBJECT-TYPE 
   SYNTAX     SnmpAdminString 
   MAX-ACCESS read-create 
   STATUS     current 
   DESCRIPTION 
       "The SMS phone number of the management entity corresponding to 
       this owner." 
   ::= { etsysSrvcLvlOwnersEntry 8 } 

etsysSrvcLvlOwnersStatus OBJECT-TYPE 
   SYNTAX     RowStatus 
   MAX-ACCESS read-create 
   STATUS     current 
   DESCRIPTION 
       "The status of this table entry." 
   ::= { etsysSrvcLvlOwnersEntry 9 } 
 
 
-- -------------------------------------------------------------
-- etsysSrvcLvlHistory  Group 
-- -------------------------------------------------------------
 
-- -------------------------------------------------------------
-- etsysSrvcLvlHistoryTable 
-- -------------------------------------------------------------
 
etsysSrvcLvlHistoryTable OBJECT-TYPE 
   SYNTAX     SEQUENCE OF EtsysSrvcLvlHistoryEntry 
   MAX-ACCESS not-accessible 
   STATUS     current 
   DESCRIPTION 
       "The table containing the measurement results." 
   ::= { etsysSrvcLvlHistory 1 } 
 
   etsysSrvcLvlHistoryEntry OBJECT-TYPE 
   SYNTAX     EtsysSrvcLvlHistoryEntry 
   MAX-ACCESS not-accessible 
   STATUS     current 
   DESCRIPTION 
       "An etsysSrvcLvlHistoryEntry entry is one of the results of a 
       measure identified by etsysSrvcLvlHistoryMeasureOwner, 
       etsysSrvcLvlHistoryMeasureIndex, etsysSrvcLvlHistoryMetricIndex 
       and etsysSrvcLvlHistoryIndex.  
        
       In the index : 
        
       + etsysSrvcLvlHistoryMeasureOwner identifies the owner of the 
       measure
        
       + etsysSrvcLvlHistoryMeasureIndex identifies the measure in the 
       owner namespace 
        
       + etsysSrvcLvlHistoryMetricIndex identifies the metric measured 
       by the measure. The metric is described in the corresponding 
       entry of the n etsysSrvcLvlMetricTable 
        
       + etsysSrvcLvlHistoryIndex is the local index of the result on 
       the history table." 

   INDEX { etsysSrvcLvlHistoryMeasureOwner, 
   etsysSrvcLvlHistoryMeasureIndex, etsysSrvcLvlHistoryMetricIndex, 
   etsysSrvcLvlHistoryIndex }  
   ::= { etsysSrvcLvlHistoryTable 1 } 
 
EtsysSrvcLvlHistoryEntry ::= 
   SEQUENCE { 
       etsysSrvcLvlHistoryMeasureOwner      EtsysSrvcLvlOwnerString, 
       etsysSrvcLvlHistoryMeasureIndex      Integer32, 
       etsysSrvcLvlHistoryMetricIndex       Integer32, 
       etsysSrvcLvlHistoryIndex             Integer32, 
       etsysSrvcLvlHistorySequence          Integer32, 
       etsysSrvcLvlHistoryTimestamp         GMTTimeStamp, 
       etsysSrvcLvlHistoryValue             Integer32 
   } 
    
etsysSrvcLvlHistoryMeasureOwner OBJECT-TYPE 
   SYNTAX     EtsysSrvcLvlOwnerString 
   MAX-ACCESS not-accessible 
   STATUS     current 
   DESCRIPTION 
       "The owner of the measure that produced this result." 
   ::= { etsysSrvcLvlHistoryEntry 1 } 
    
etsysSrvcLvlHistoryMeasureIndex OBJECT-TYPE 
   SYNTAX Integer32 (1.. 65535) 
   MAX-ACCESS not-accessible 
   STATUS     current 
   DESCRIPTION 
       " The index (in owner's namespace) of the measure that produced 
       this result." 
   ::= { etsysSrvcLvlHistoryEntry 2 } 
 
etsysSrvcLvlHistoryMetricIndex OBJECT-TYPE 
   SYNTAX Integer32 (1.. 65535) 
   MAX-ACCESS not-accessible 
   STATUS     current 
   DESCRIPTION 
       " etsysSrvcLvlHistoryMetricIndex identifies the metric measured 
       by the measure. The metric is described in the corresponding 
       entry of the etsysSrvcLvlMetricTable." 
   ::= { etsysSrvcLvlHistoryEntry 3 } 
    
etsysSrvcLvlHistoryIndex OBJECT-TYPE 
   SYNTAX Integer32 (1.. 65535) 
   MAX-ACCESS not-accessible 
   STATUS     current 
   DESCRIPTION 
       " A local index that identifies a result in the history table." 
       ::= { etsysSrvcLvlHistoryEntry 4 } 

etsysSrvcLvlHistorySequence OBJECT-TYPE 
       SYNTAX Integer32 (0.. 65535) 
       MAX-ACCESS read-only 
       STATUS     current 
       DESCRIPTION 
       "etsysSrvcLvlHistorySequence is the sequence index of the 
       measurement results for a metric. 
        
       Network metrics:  
       It's the sequence index of a measurement packet. Typically, it 
       identifies the order of the packet in the stream of packets sends
       by the source. 
        
       Aggregated metrics: 
       It is the sequence index of the computed aggregated metric 
       result." 
   ::= { etsysSrvcLvlHistoryEntry 5 } 
 
etsysSrvcLvlHistoryTimestamp OBJECT-TYPE 
   SYNTAX GMTTimeStamp 
   MAX-ACCESS read-only 
   STATUS     current 
   DESCRIPTION 
       "The timestamp when the measurement occurred." 
   ::= { etsysSrvcLvlHistoryEntry 6 } 
    
etsysSrvcLvlHistoryValue OBJECT-TYPE 
   SYNTAX Integer32 
   MAX-ACCESS read-only 
   STATUS     current 
   DESCRIPTION 
       "The observed value of the measurement." 
   ::= { etsysSrvcLvlHistoryEntry 7 } 
 
 
-- -------------------------------------------------------------
-- etsysSrvcLvlMeasure Group 
-- -------------------------------------------------------------
 
-- -------------------------------------------------------------
-- etsysSrvcLvlNetMeasureTable 
-- -------------------------------------------------------------
 
etsysSrvcLvlNetMeasureTable OBJECT-TYPE 
   SYNTAX     SEQUENCE OF EtsysSrvcLvlNetMeasureEntry 
   MAX-ACCESS not-accessible 
   STATUS     current 
   DESCRIPTION 
       "An entry is a measurement that performs network measures and 
       provides results. 
       It performs several metric measurements per packet exchange. Each
       step of a measure produces a singleton result per metric. The 
       time of the measurement and the value of the metric are saved in 
       the etsysSrvcLvlHistoryTable." 
   ::= { etsysSrvcLvlMeasure 1 } 
 
etsysSrvcLvlNetMeasureEntry OBJECT-TYPE 
   SYNTAX     EtsysSrvcLvlNetMeasureEntry 
   MAX-ACCESS not-accessible 
   STATUS     current 
   DESCRIPTION 
       "The EtsysSrvcLvlNetMeasureTable is mandatory. 
        
       The etsysSrvcLvlNetMeasureMetrics is set to a list of metrics 
       to be computed from the same raw packet exchange. Each step of 
       measurement delivers a singleton per chosen metric. Results are 
       timestamped and saved in the etsysSrvcLvlHistoryTable. 
        
       The etsysSrvcLvlNetMeasureTable typical usage consists in 
       providing network measure indices in order  to allow aggregated 
       measures to perform aggregation on the results of network 
       measures."
   INDEX { etsysSrvcLvlNetMeasureOwner, etsysSrvcLvlNetMeasureIndex } 
   ::= { etsysSrvcLvlNetMeasureTable 1 } 
 
EtsysSrvcLvlNetMeasureEntry ::= SEQUENCE { 
   etsysSrvcLvlNetMeasureOwner              EtsysSrvcLvlOwnerString, 
   etsysSrvcLvlNetMeasureIndex              Integer32, 
   etsysSrvcLvlNetMeasureName               SnmpAdminString, 
   etsysSrvcLvlNetMeasureMetrics            EtsysSrvcLvlStandardMetrics,
   etsysSrvcLvlNetMeasureBeginTime          GMTTimeStamp, 
   etsysSrvcLvlNetMeasureDurationUnit       TimeUnit, 
   etsysSrvcLvlNetMeasureDuration           Integer32, 
   etsysSrvcLvlNetMeasureHistorySize        Integer32, 
   etsysSrvcLvlNetMeasureFailureMgmtMode    INTEGER, 
   etsysSrvcLvlNetMeasureResultsMgmt        INTEGER, 
   etsysSrvcLvlNetMeasureSrcTypeP           TypeP, 
   etsysSrvcLvlNetMeasureSrc                TypePaddress, 
   etsysSrvcLvlNetMeasureDstTypeP           TypeP, 
   etsysSrvcLvlNetMeasureDst                TypePaddress, 
   etsysSrvcLvlNetMeasureTxMode             INTEGER, 
   etsysSrvcLvlNetMeasureTxPacketRateUnit   TimeUnit, 
   etsysSrvcLvlNetMeasureTxPacketRate       Integer32, 
   etsysSrvcLvlNetMeasureDevtnOrBurstSize   Integer32,   
   etsysSrvcLvlNetMeasureMedOrIntBurstSize  Integer32, 
   etsysSrvcLvlNetMeasureLossTimeout        Integer32, 
   etsysSrvcLvlNetMeasureL3PacketSize       Integer32, 
   etsysSrvcLvlNetMeasureDataPattern        OCTET STRING, 
   etsysSrvcLvlNetMeasureMap                SnmpAdminString, 
   etsysSrvcLvlNetMeasureSingletons         Integer32, 
   etsysSrvcLvlNetMeasureOperState          INTEGER 
} 
 
etsysSrvcLvlNetMeasureOwner OBJECT-TYPE 
   SYNTAX     EtsysSrvcLvlOwnerString 
   MAX-ACCESS not-accessible 
   STATUS     current 
   DESCRIPTION 
       "The owner of the network measurement." 
   ::= { etsysSrvcLvlNetMeasureEntry 1 } 
    
etsysSrvcLvlNetMeasureIndex OBJECT-TYPE 
   SYNTAX Integer32 (1.. 65535) 
   MAX-ACCESS not-accessible 
   STATUS     current 
   DESCRIPTION 
       "The index (in owner's namespace) of the network measure. " 
   ::= { etsysSrvcLvlNetMeasureEntry 2 } 
 
etsysSrvcLvlNetMeasureName OBJECT-TYPE 
   SYNTAX SnmpAdminString 
   MAX-ACCESS read-write
   STATUS     current 
   DESCRIPTION 
       "The name of the metric instance. It illustrates the specificity 
       of the metric and includes the metric and the TypeP. 
    
       Example:  
       IP-TCP-HTTP-One-way-Delay: free text " 
   ::= { etsysSrvcLvlNetMeasureEntry 3 } 

etsysSrvcLvlNetMeasureMetrics OBJECT-TYPE 
   SYNTAX EtsysSrvcLvlStandardMetrics 
   MAX-ACCESS read-write
   STATUS     current 
   DESCRIPTION 
       "Defines the metrics to compute within this measure. ONLY network 
       metrics of the same type are allowed in this field. 
       A measure may be configured for the result of different metric 
       singletons to be archived in the etsysSrvcLvlHistoryTable. The 
       etsysSrvcLvlMetricIndex of the created result has the value of 
       the bit index of the corresponding etsysSrvcLvlMeasureMetrics as 
       explained above in the etsysSrvcLvlMetricIndex definition. 
      
       Example: 
       A measure asking for One-way-Delay(6) and One-way-Packet-Loss(12) 
       generated a flow of singletons which are logged in the 
       etsysSrvcLvlHistoryTable. The singletons created for the 
       One-way-Delay measure have a value of etsysSrvcLvlMetricIndex of 
       6 while the created singletons for the One-way-Packet-Loss 
       measure have a value of etsysSrvcLvlMetricIndex of 12. 
      
       One measure may perform simultaneously  
              either several network metrics 
              either several aggregated metrics" 
   -- { one-way-Delay, one-way-Packet-Loss } 
   ::= { etsysSrvcLvlNetMeasureEntry 4 } 
 
etsysSrvcLvlNetMeasureBeginTime OBJECT-TYPE
   SYNTAX GMTTimeStamp
   MAX-ACCESS read-write
   STATUS     current
   DESCRIPTION
       "Specifies the time at which the measurement begins."
   ::= { etsysSrvcLvlNetMeasureEntry 5 }
 
etsysSrvcLvlNetMeasureDurationUnit OBJECT-TYPE 
   SYNTAX TimeUnit  
   MAX-ACCESS read-write
   STATUS     current 
   DESCRIPTION 
       "Specifies the measurement duration unit." 
   DEFVAL { second } 
   ::= { etsysSrvcLvlNetMeasureEntry 6 } 
 
etsysSrvcLvlNetMeasureDuration OBJECT-TYPE 
   SYNTAX     Integer32 
   MAX-ACCESS read-write
   STATUS     current 
   DESCRIPTION 
       "Specifies the measurement duration." 
   ::= { etsysSrvcLvlNetMeasureEntry 7 } 
 
etsysSrvcLvlNetMeasureHistorySize OBJECT-TYPE 
   SYNTAX     Integer32 
   MAX-ACCESS read-write
   STATUS     current 
   DESCRIPTION 
       "Specifies the maximum number of results saved for each metric of 
       this measure. 
       Overflow condition will be managed by the object 
       etsysSrvcLvlNetMeasureResultsMgmt." 
   ::= { etsysSrvcLvlNetMeasureEntry 8 } 
 
etsysSrvcLvlNetMeasureFailureMgmtMode OBJECT-TYPE 
   SYNTAX     INTEGER { 
       auto(1), 
       manual(2), 
       discarded(3) 
   } 
   MAX-ACCESS  read-write
   STATUS      current 
   DESCRIPTION 
       "This object defines whether this row is discarded on failure.
       'auto'  
          the failure is handled automatically depending on the 
          implementation.
       'manual'  
          the entry should be discarded manually.
       'discarded'  
          the entry is discarded all the time." 
   DEFVAL { auto } 
   ::= { etsysSrvcLvlNetMeasureEntry 9 } 
 
etsysSrvcLvlNetMeasureResultsMgmt OBJECT-TYPE 
   SYNTAX INTEGER { 
       wrap(1), 
       suspend(2), 
       delete(3) 
   } 
   MAX-ACCESS read-write
   STATUS     current 
   DESCRIPTION 
       " 
       Action to take when the log is full. The user may choose 
       to either wrap, in which case the agent writes over existing 
       records. The user may choose to suspend writing to the log in the 
       event that he wishes to archive the data. The delete action 
       causes the agent to begin to write in the log, and assumes the 
       data has been cleared. 
       This object indicates the way the measurement results are managed 
       when the owner quota has been exceeded: 
       'wrap'  
          continue the measurement and erase the older entries in the 
       history. 
       'suspend'  
          stop the measure and keep the results in the history. 
       'delete' 
          remove the results from the history." 
   ::= { etsysSrvcLvlNetMeasureEntry 10 } 
    
etsysSrvcLvlNetMeasureSrcTypeP OBJECT-TYPE 
   SYNTAX TypeP 
   MAX-ACCESS read-write
   STATUS     current 
   DESCRIPTION 
       "Defines the type P of the source address of the packets sent by 
       the measure." 
   DEFVAL { "ip" }  
   ::= { etsysSrvcLvlNetMeasureEntry 11 } 
 
etsysSrvcLvlNetMeasureSrc OBJECT-TYPE 
   SYNTAX TypePaddress 
   MAX-ACCESS read-write
   STATUS     current 
   DESCRIPTION 
       "Specifies the address of the source of the measure. 
       It is represented as a list of parameters corresponding to those 
       of the PROTOCOL IDENTIFIER sets in 
       etsysSrvcLvlNetMeasureSrcTypeP." 
   ::= { etsysSrvcLvlNetMeasureEntry 12} 
 
etsysSrvcLvlNetMeasureDstTypeP OBJECT-TYPE 
   SYNTAX TypeP 
   MAX-ACCESS read-write
   STATUS     current 
   DESCRIPTION 
       "Defines the type P of the destination address of the packets 
       sent by the measure." 
   DEFVAL { "ip" }  
   ::= { etsysSrvcLvlNetMeasureEntry 13 } 
 
etsysSrvcLvlNetMeasureDst OBJECT-TYPE 
   SYNTAX TypePaddress 
   MAX-ACCESS read-write
   STATUS     current 
   DESCRIPTION 
       "Specifies the address of the destination of the measure. 
       It is represented as a list of parameters corresponding to those 
       of the PROTOCOL IDENTIFIER set in 
       etsysSrvcLvlNetMeasureDstTypeP." 
   ::= { etsysSrvcLvlNetMeasureEntry 14 } 
 
etsysSrvcLvlNetMeasureTxMode OBJECT-TYPE 
   SYNTAX INTEGER { 
       other(0), 
       periodic(1), 
       poisson(2), 
       multiburst(3) 
          } 
   MAX-ACCESS read-write
   STATUS     current 
   DESCRIPTION 
       "The transmit mode used to send the packets: 
       'other'  
          The rule used to send the packets is unknown. 
       'periodic'  
          Packets are sent periodically at 
          etsysSrvcLvlNetMeasureTxPacketRate rate.  
       'poisson'  
          Packets are sent using a Poisson law, the median is the value 
       of etsysSrvcLvlNetMeasureMedOrIntBurstSize, the deviation is 
       etsysSrvcLvlNetMeasureDevtnOrBurstSize.  
       'multiburst'  
          Packets are sent bursty at etsysSrvcLvlNetMeasureTxPacketRate.
          The size of the burst is made of 
          etsysSrvcLvlNetMeasureDevtnOrBurstSize packets." 
   ::= { etsysSrvcLvlNetMeasureEntry 15 } 
    
etsysSrvcLvlNetMeasureTxPacketRateUnit      OBJECT-TYPE 
   SYNTAX TimeUnit 
   MAX-ACCESS read-write
   STATUS     current 
   DESCRIPTION 
       "The packet rate unit used to send the packets." 
   ::= { etsysSrvcLvlNetMeasureEntry 16 } 
    
etsysSrvcLvlNetMeasureTxPacketRate OBJECT-TYPE 
   SYNTAX Integer32  
   MAX-ACCESS read-write
   STATUS     current 
   DESCRIPTION 
       "The rate the packets are sent." 
   ::= { etsysSrvcLvlNetMeasureEntry 17 } 
 
etsysSrvcLvlNetMeasureDevtnOrBurstSize   OBJECT-TYPE 
   SYNTAX     Integer32 
   MAX-ACCESS read-write
   STATUS     current 
   DESCRIPTION 
       "Indicates the average number of packets per seconds sent using a 
       poisson law." 
   ::= { etsysSrvcLvlNetMeasureEntry 18 } 
    
etsysSrvcLvlNetMeasureMedOrIntBurstSize   OBJECT-TYPE 
   SYNTAX     Integer32 
   MAX-ACCESS read-write
   STATUS     current 
   DESCRIPTION 
       "According to the transmit mode, this value indicates the average 
       number of packets per seconds sent using a poisson law, or the 
       number of packets to wait between consecutive bursts." 
   ::= { etsysSrvcLvlNetMeasureEntry 19 } 
 
etsysSrvcLvlNetMeasureLossTimeout OBJECT-TYPE 
   SYNTAX     Integer32
   UNITS      "Milliseconds" 
   MAX-ACCESS read-write
   STATUS     current 
   DESCRIPTION 
       "Specifies the delay after which the packet is considered lost
        by the sink." 
   ::= { etsysSrvcLvlNetMeasureEntry 20 } 
 
etsysSrvcLvlNetMeasureL3PacketSize OBJECT-TYPE 
   SYNTAX     Integer32
   MAX-ACCESS read-write
   STATUS     current 
   DESCRIPTION 
       "Specifies the size of the packets counted at the IP network 
       layer in regards to the TypeP definition. 
        
       Example: For a TypeP 'ip ipip4' the L3 size will be the size of 
       the packet at ipip4 level." 
   ::= { etsysSrvcLvlNetMeasureEntry 21 }        
 
etsysSrvcLvlNetMeasureDataPattern OBJECT-TYPE 
   SYNTAX     OCTET STRING 
   MAX-ACCESS read-write 
   STATUS     current 
   DESCRIPTION 
       "The pattern used to fill the payload of the packet." 
   ::= { etsysSrvcLvlNetMeasureEntry 22 }        
    
etsysSrvcLvlNetMeasureMap OBJECT-TYPE 
   SYNTAX SnmpAdminString 
   MAX-ACCESS read-write
   STATUS     current 
   DESCRIPTION 
       "An administrative name of a network management map to which
       the measure belongs." 
   DEFVAL { "" } 
   ::= { etsysSrvcLvlNetMeasureEntry 23 } 
 
etsysSrvcLvlNetMeasureSingletons  OBJECT-TYPE 
   SYNTAX Integer32 
   MAX-ACCESS read-only 
   STATUS     current 
   DESCRIPTION 
       "Reports the number of singletons performed per metric by the 
       measure since the beginning of the measure. This parameters is 
       required for aggregation." 
   ::= { etsysSrvcLvlNetMeasureEntry 24 } 
 
etsysSrvcLvlNetMeasureOperState OBJECT-TYPE 
   SYNTAX INTEGER { 
       unknown(0), 
       running(1), 
       stopped(2) 
   } 
   MAX-ACCESS read-only 
   STATUS     current 
   DESCRIPTION 
       "Reports the operational status of the network measure."
   ::= { etsysSrvcLvlNetMeasureEntry 25 } 
 
 
-- -------------------------------------------------------------
-- etsysSrvcLvlAggrMeasureTable 
-- -------------------------------------------------------------
 
etsysSrvcLvlAggrMeasureTable OBJECT-TYPE 
   SYNTAX     SEQUENCE OF EtsysSrvcLvlAggrMeasureEntry 
   MAX-ACCESS not-accessible 
   STATUS     current 
   DESCRIPTION 
       " An aggregated measure summarizes the results of previous 
       network or aggregated measures. The results may be saved in the 
       etsysSrvcLvlHistoryTable. 
       Each step of the calculation for the measure produces a singleton 
       result per metric." 
   ::= { etsysSrvcLvlMeasure 2 } 
 
etsysSrvcLvlAggrMeasureEntry OBJECT-TYPE 
   SYNTAX     EtsysSrvcLvlAggrMeasureEntry 
   MAX-ACCESS not-accessible 
   STATUS     current 
   DESCRIPTION 
       "Typically the configuration operation sets the value of 
       the EtsysSrvcLvlAggrMeasureEntry.  
        
       etsysSrvcLvlAggrMeasureTable is mandatory. 
        
        
       The etsysSrvcLvlAggrMeasureMetrics defines the metric to compute. 
       The results of the measure to summarize are identified by:  
       + etsysSrvcLvlAggrMeasureHistoryOwner,  
       + etsysSrvcLvlAggrMeasureHistoryOwnerIndex and  
       + etsysSrvcLvlAggrMeasureHistoryMetric 
        
       The aggregated task starts at etsysSrvcLvlAggrMeasureBeginTime 
       and ends after etsysSrvcLvlAggrMeasureDuration. An aggregated 
       result is performed and saved in the etsysSrvcLvlHistoryTable 
       for each etsysSrvcLvlAggrMeasureAggrPeriod." 
   INDEX { etsysSrvcLvlAggrMeasureOwner, etsysSrvcLvlAggrMeasureIndex } 
   ::= { etsysSrvcLvlAggrMeasureTable 1 } 
 
EtsysSrvcLvlAggrMeasureEntry ::= SEQUENCE { 
   etsysSrvcLvlAggrMeasureOwner             EtsysSrvcLvlOwnerString, 
   etsysSrvcLvlAggrMeasureIndex             Integer32, 
   etsysSrvcLvlAggrMeasureName              SnmpAdminString, 
   etsysSrvcLvlAggrMeasureMetrics           EtsysSrvcLvlStandardMetrics,
   etsysSrvcLvlAggrMeasureBeginTime         GMTTimeStamp, 
   etsysSrvcLvlAggrMeasureAggrPeriodUnit    TimeUnit, 
   etsysSrvcLvlAggrMeasureAggrPeriod        Integer32, 
   etsysSrvcLvlAggrMeasureDurationUnit      TimeUnit, 
   etsysSrvcLvlAggrMeasureDuration          Integer32, 
   etsysSrvcLvlAggrMeasureHistorySize       Integer32, 
   etsysSrvcLvlAggrMeasureStorageType       StorageType, 
   etsysSrvcLvlAggrMeasureHistoryOwner      EtsysSrvcLvlOwnerString, 
   etsysSrvcLvlAggrMeasureHistoryOwnerIndex Integer32, 
   etsysSrvcLvlAggrMeasureHistoryMetric     Integer32, 
   etsysSrvcLvlAggrMeasureAdminState        INTEGER, 
   etsysSrvcLvlAggrMeasureMap               SnmpAdminString, 
   etsysSrvcLvlAggrMeasureResultsMgmt       INTEGER, 
   etsysSrvcLvlAggrMeasureStatus            RowStatus 
} 
etsysSrvcLvlAggrMeasureOwner OBJECT-TYPE 
   SYNTAX     EtsysSrvcLvlOwnerString 
   MAX-ACCESS not-accessible 
   STATUS     current 
   DESCRIPTION 
       "The owner who has configured this entry." 
   ::= { etsysSrvcLvlAggrMeasureEntry 1 } 
    
etsysSrvcLvlAggrMeasureIndex OBJECT-TYPE 
   SYNTAX Integer32 (1.. 65535) 
   MAX-ACCESS not-accessible 
   STATUS     current 
   DESCRIPTION 
       "The index (in owner's namespace) of the measure. The value is 
       managed by the owner." 
   ::= { etsysSrvcLvlAggrMeasureEntry 2 } 
 
etsysSrvcLvlAggrMeasureName OBJECT-TYPE 
   SYNTAX SnmpAdminString 
   MAX-ACCESS read-create 
   STATUS     current 
   DESCRIPTION 
       "The name of the instance of the metric. It illustrates the 
       specificity of the metric and includes the metric and the typeP. 
        
       example: IP-port-HTTP-connectivity" 
   ::= { etsysSrvcLvlAggrMeasureEntry 3 } 
 
etsysSrvcLvlAggrMeasureMetrics OBJECT-TYPE 
   SYNTAX EtsysSrvcLvlStandardMetrics 
   MAX-ACCESS read-create 
   STATUS     current 
   DESCRIPTION 
       "Defines the metrics to compute within this aggregated measure.  
        
       ONLY aggregated metrics of the same type are allowed in this 
       field. 
        A measure may be configured for the result of different metric 
       singletons to be archived in the etsysSrvcLvlHistoryTable. The 
       etsysSrvcLvlMetricIndex of the created result has the value of 
       the bit index of the corresponding etsysSrvcLvlAggrMeasureMetrics
       as explained above in the etsysSrvcLvlMetricIndex definition. 
        
       Example: 
       A measure asking for One-way-Delay(6) and One-way-Packet-Loss(12) 
       generated a flow of singletons which are logged in the 
       etsysSrvcLvlHistoryTable. The singletons created for the 
       One-way-Delay measure have a value of etsysSrvcLvlMetricIndex of 
       6 while the created singletons for the One-way-Packet-Loss 
       measure have a value of etsysSrvcLvlMetricIndex of 12."  
   ::= { etsysSrvcLvlAggrMeasureEntry 4 } 
 
etsysSrvcLvlAggrMeasureBeginTime OBJECT-TYPE 
   SYNTAX GMTTimeStamp 
   MAX-ACCESS read-create 
   STATUS     current 
   DESCRIPTION 
       "Specifies the time at which the aggregated measure starts." 
   ::= { etsysSrvcLvlAggrMeasureEntry 5 } 
    
etsysSrvcLvlAggrMeasureAggrPeriodUnit OBJECT-TYPE 
   SYNTAX TimeUnit 
   MAX-ACCESS read-create 
   STATUS     current 
   DESCRIPTION 
       "Specifies the unit of the aggregated measure period." 
   DEFVAL { second } 
   ::= { etsysSrvcLvlAggrMeasureEntry 6 } 
 
etsysSrvcLvlAggrMeasureAggrPeriod OBJECT-TYPE 
   SYNTAX     Integer32 
   MAX-ACCESS read-create 
   STATUS     current 
   DESCRIPTION 
       "Specifies the amount of time between 2 measurement action 
       intervals. The action is specific to the semantic of the measure. 
                
       They are performed periodically on a sequence of results of other
       measures. The period corresponds to the interval between two 
       successive computations of the metric. The value of 
       etsysSrvcLvlHistoryTimestamp result of a aggregated metric 
       computed corresponds to the value of the 
       etsysSrvcLvlHistoryTimestamp of the last metric result of the 
       sequence used in to compute the aggregated metric." 
   ::= { etsysSrvcLvlAggrMeasureEntry 7 } 
 
etsysSrvcLvlAggrMeasureDurationUnit OBJECT-TYPE 
   SYNTAX TimeUnit 
   MAX-ACCESS read-create 
   STATUS     current 
   DESCRIPTION 
       "Specifies the unit of the measure duration." 
   DEFVAL { second } 
   ::= { etsysSrvcLvlAggrMeasureEntry 8 } 
 
etsysSrvcLvlAggrMeasureDuration OBJECT-TYPE 
   SYNTAX     Integer32 
   MAX-ACCESS read-create 
   STATUS     current 
   DESCRIPTION 
       "Specifies the duration of the measure." 
   ::= { etsysSrvcLvlAggrMeasureEntry 9 } 
 
etsysSrvcLvlAggrMeasureHistorySize OBJECT-TYPE 
   SYNTAX     Integer32 
   MAX-ACCESS read-create 
   STATUS     current 
   DESCRIPTION 
       "Specifies the maximum number of results saved for each metric of 
       this measure. Overflow condition will be managed by the object 
       etsysSrvcLvlAggrMeasureResultsMgmt. " 
   ::= { etsysSrvcLvlAggrMeasureEntry 10 } 
 
etsysSrvcLvlAggrMeasureStorageType OBJECT-TYPE 
   SYNTAX     StorageType 
   MAX-ACCESS  read-create 
   STATUS      current 
   DESCRIPTION 
       "This object defines whether this row and the corresponding 
       entry in the etsysSrvcLvlNetMeasureTable is kept in volatile 
       storage and lost upon reboot or if this row is backed up 
       by non-volatile or permanent storage. 
       Possible values are: other(1), volatile(2), nonVolatile(3), 
       permanent(4), readOnly(5)." 
   DEFVAL { volatile } 
   ::= { etsysSrvcLvlAggrMeasureEntry 11 } 
    
etsysSrvcLvlAggrMeasureResultsMgmt OBJECT-TYPE 
   SYNTAX INTEGER { 
       wrap(1), 
       suspend(2) 
   } 
   MAX-ACCESS read-only 
   STATUS     current 
   DESCRIPTION 
       "This object displays the way the history of the aggregated 
       measure is managed. 
       'wrap'  
          continue the measure and erase the older entries in the 
       history. 
       'suspend'  
          stop the measure and keep the results in the history. 
       " 
   ::= { etsysSrvcLvlAggrMeasureEntry 12 } 
 
etsysSrvcLvlAggrMeasureHistoryOwner OBJECT-TYPE 
   SYNTAX EtsysSrvcLvlOwnerString 
   MAX-ACCESS read-create 
   STATUS     current 
   DESCRIPTION 
       "The owner of the measure to summarize. " 
   ::= { etsysSrvcLvlAggrMeasureEntry 13 } 
 
etsysSrvcLvlAggrMeasureHistoryOwnerIndex OBJECT-TYPE 
   SYNTAX Integer32 (1.. 65535) 
   MAX-ACCESS read-create 
   STATUS     current 
   DESCRIPTION 
       "The index (in owner's namespace) of the measure to summarize. " 
   ::= { etsysSrvcLvlAggrMeasureEntry 14 } 
 
etsysSrvcLvlAggrMeasureHistoryMetric OBJECT-TYPE 
   SYNTAX Integer32 
   MAX-ACCESS read-create 
   STATUS     current 
   DESCRIPTION 
       "The metric of the measure to summarize. " 
   ::= { etsysSrvcLvlAggrMeasureEntry 15 } 
 
etsysSrvcLvlAggrMeasureAdminState OBJECT-TYPE 
   SYNTAX INTEGER { 
       start(0), 
       stop(1) 
   } 
   MAX-ACCESS read-create 
   STATUS     current 
   DESCRIPTION 
       "This object controls the activity of the aggregated measure. 
       'start'  
          The aggregated measure is started. 
       'stop'  
          The aggregated measure is stopped. 
       " 
   ::= { etsysSrvcLvlAggrMeasureEntry 16 } 
    
etsysSrvcLvlAggrMeasureMap OBJECT-TYPE 
   SYNTAX SnmpAdminString 
   MAX-ACCESS read-create 
   STATUS     current 
   DESCRIPTION 
       "This object allows for classification of the measure. It is 
       typically the name of an administrative map. 
       " 
   DEFVAL { "" } 
   ::= { etsysSrvcLvlAggrMeasureEntry 17 } 

etsysSrvcLvlAggrMeasureStatus OBJECT-TYPE 
   SYNTAX     RowStatus 
   MAX-ACCESS read-create 
   STATUS     current 
   DESCRIPTION 
       "The status of this table entry. Once the entry status is set to 
       active, the associate entry cannot be modified. 
        
       The creation of an aggregated measure forced the creation of the 
       corresponding entry in etsysSrvcLvlNetMeasureTable." 
   ::= { etsysSrvcLvlAggrMeasureEntry 18 } 
    
 
-- -------------------------------------------------------------
-- Conformance Information
-- -------------------------------------------------------------

etsysSrvcLvlReportingConformance    OBJECT IDENTIFIER 
    ::= { etsysServiceLevelReportingMIB 2 }

etsysSrvcLvlReportingGroups         OBJECT IDENTIFIER
    ::= { etsysSrvcLvlReportingConformance 1 }

etsysSrvcLvlReportingCompliances    OBJECT IDENTIFIER
    ::= { etsysSrvcLvlReportingConformance 2 }


-- -------------------------------------------------------------
-- Units of Conformance
-- -------------------------------------------------------------

etsysSrvcLvlSystemGroup OBJECT-GROUP
    OBJECTS { 
        etsysSrvcLvlSystemTime,
        etsysSrvcLvlSystemClockResolution,
        etsysSrvcLvlMetricCapabilities,
        etsysSrvcLvlMetricType,
        etsysSrvcLvlMetricUnit,
        etsysSrvcLvlMetricDescription
    }
    STATUS current
    DESCRIPTION
        "The System Group."
    ::= { etsysSrvcLvlReportingGroups 1 }

etsysSrvcLvlOwnersGroup OBJECT-GROUP
    OBJECTS { 
        etsysSrvcLvlOwnersOwner,
        etsysSrvcLvlOwnersGrantedMetrics,
        etsysSrvcLvlOwnersQuota,
        etsysSrvcLvlOwnersIpAddressType,
        etsysSrvcLvlOwnersIpAddress,
        etsysSrvcLvlOwnersEmail,
        etsysSrvcLvlOwnersSMS,
        etsysSrvcLvlOwnersStatus
    }
    STATUS current
    DESCRIPTION
        "The Owners Group."
    ::= { etsysSrvcLvlReportingGroups 2 }

etsysSrvcLvlHistoryGroup OBJECT-GROUP
    OBJECTS { 
        etsysSrvcLvlHistorySequence,
        etsysSrvcLvlHistoryTimestamp,
        etsysSrvcLvlHistoryValue
    }
    STATUS current
    DESCRIPTION
        "The History Group."
    ::= { etsysSrvcLvlReportingGroups 3 }

etsysSrvcLvlMeasureGroup OBJECT-GROUP
    OBJECTS { 
        etsysSrvcLvlNetMeasureName,
        etsysSrvcLvlNetMeasureMetrics,
        etsysSrvcLvlNetMeasureBeginTime,
        etsysSrvcLvlNetMeasureDurationUnit,
        etsysSrvcLvlNetMeasureDuration,
        etsysSrvcLvlNetMeasureHistorySize,
        etsysSrvcLvlNetMeasureFailureMgmtMode,
        etsysSrvcLvlNetMeasureResultsMgmt,
        etsysSrvcLvlNetMeasureSrcTypeP,
        etsysSrvcLvlNetMeasureSrc,
        etsysSrvcLvlNetMeasureDstTypeP,
        etsysSrvcLvlNetMeasureDst,
        etsysSrvcLvlNetMeasureTxMode,
        etsysSrvcLvlNetMeasureTxPacketRateUnit,
        etsysSrvcLvlNetMeasureTxPacketRate,
        etsysSrvcLvlNetMeasureDevtnOrBurstSize,
        etsysSrvcLvlNetMeasureMedOrIntBurstSize,
        etsysSrvcLvlNetMeasureLossTimeout,
        etsysSrvcLvlNetMeasureL3PacketSize,
        etsysSrvcLvlNetMeasureDataPattern,
        etsysSrvcLvlNetMeasureMap,
        etsysSrvcLvlNetMeasureSingletons,
        etsysSrvcLvlNetMeasureOperState,
        etsysSrvcLvlAggrMeasureName,
        etsysSrvcLvlAggrMeasureMetrics,
        etsysSrvcLvlAggrMeasureBeginTime,
        etsysSrvcLvlAggrMeasureAggrPeriodUnit,
        etsysSrvcLvlAggrMeasureAggrPeriod,
        etsysSrvcLvlAggrMeasureDurationUnit,
        etsysSrvcLvlAggrMeasureDuration,
        etsysSrvcLvlAggrMeasureHistorySize,
        etsysSrvcLvlAggrMeasureStorageType,
        etsysSrvcLvlAggrMeasureResultsMgmt,
        etsysSrvcLvlAggrMeasureHistoryOwner,
        etsysSrvcLvlAggrMeasureHistoryOwnerIndex,
        etsysSrvcLvlAggrMeasureHistoryMetric,
        etsysSrvcLvlAggrMeasureAdminState,
        etsysSrvcLvlAggrMeasureMap,
        etsysSrvcLvlAggrMeasureStatus
    }
    STATUS current
    DESCRIPTION
        "The Network and Aggregate Measures Group."
    ::= { etsysSrvcLvlReportingGroups 4 }


-- -------------------------------------------------------------
-- Compliance statements
-- -------------------------------------------------------------

etsysSrvcLvlReportingCompliance MODULE-COMPLIANCE
    STATUS      current
    DESCRIPTION
        "The compliance statement for devices that support the
         etsysSrvcLvlReportingMib."

    MODULE  -- this module
        MANDATORY-GROUPS { etsysSrvcLvlSystemGroup,
                           etsysSrvcLvlOwnersGroup,
                           etsysSrvcLvlHistoryGroup,
                           etsysSrvcLvlMeasureGroup }


    ::= { etsysSrvcLvlReportingCompliances 1 }
 
END