You are here:

MonitorTools.com > Technical documentation > SNMP > MIB > Enterasys Networks > ENTERASYS-SPANNING-TREE-DIAGNOSTIC-MIB
ActiveXperts Network Monitor 2019##AdminFavorites

ENTERASYS-SPANNING-TREE-DIAGNOSTIC-MIB by vendor Enterasys Networks

ENTERASYS-SPANNING-TREE-DIAGNOSTIC-MIB file content

The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.

Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.

Use ActiveXperts Network Monitor 2019 to import vendor-specific MIB files, inclusing ENTERASYS-SPANNING-TREE-DIAGNOSTIC-MIB.


Vendor: Enterasys Networks
Mib: ENTERASYS-SPANNING-TREE-DIAGNOSTIC-MIB  [download]  [view objects]
Tool: ActiveXperts Network Monitor 2019 [download]    (ships with advanced SNMP/MIB tools)
ENTERASYS-SPANNING-TREE-DIAGNOSTIC-MIB DEFINITIONS ::= BEGIN

--  enterasys-spanning-tree-diagnostic-mib.txt
--
--  Part Number:
--
--

--  This module provides authoritative definitions for Enterasys 
--  Networks' IEEE Spanning Tree Diagnostic MIB.

--
--  This module will be extended, as needed.

--  Enterasys Networks reserves the right to make changes in this
--  specification and other information contained in this document
--  without prior notice.  The reader should consult Enterasys Networks
--  to determine whether any such changes have been made.
--
--  In no event shall Enterasys Networks be liable for any incidental,
--  indirect, special, or consequential damages whatsoever (including
--  but not limited to lost profits) arising out of or related to this
--  document or the information contained in it, even if Enterasys
--  Networks has been advised of, known, or should have known, the
--  possibility of such damages.
--
--  Enterasys Networks grants vendors, end-users, and other interested
--  parties a non-exclusive license to use this Specification in 
--  connection with the management of Enterasys Networks products.

--  Copyright September, 2002 Enterasys Networks, Inc.

IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, Counter32, TimeTicks
        FROM SNMPv2-SMI
    TEXTUAL-CONVENTION, DateAndTime
        FROM SNMPv2-TC
    MODULE-COMPLIANCE, OBJECT-GROUP
        FROM SNMPv2-CONF
    InterfaceIndex
        FROM IF-MIB
    BridgeId
        FROM BRIDGE-MIB
    etsysModules
        FROM ENTERASYS-MIB-NAMES;

etsysSpanningTreeDiagnosticMIB MODULE-IDENTITY
    LAST-UPDATED "200301151918Z"  -- Wed Jan 15 19:18 GMT 2003
    ORGANIZATION "Enterasys Networks, Inc"
    CONTACT-INFO
    "Postal: Enterasys Networks
             35 Industrial Way, P.O. Box 5005
             Rochester, NH 03867-0505

     Phone:  +1 603 332 9400
     E-mail: support@enterasys.com
     WWW:    http://www.enterasys.com"
    DESCRIPTION
        "This MIB module defines a portion of the SNMP enterprise
         MIBs under Enterasys Networks' enterprise OID pertaining to 
         the Spanning Tree Protocols IEEE 802.1D, 802.1w, and 802.1s."

    REVISION "200301151918Z"  -- Wed Jan 15 19:18 GMT 2003
    DESCRIPTION
        "Added four objects to count the number of inferior BPDUs
         received from a bridge port that incorrectly believes itself
         to be the designated port."

    REVISION "200211211901Z"  -- Thu Nov 21 19:01 GMT 2002
    DESCRIPTION
        "Added four objects to count the reception and transmission
         of IEEE 802.1D Configuration BPDUs with their Topology Change
         flags set, both on a overall and on a per port basis.
         Deprecated the etsysStpDiagMstiPortTopChanges object."

    REVISION "200211182136Z"  -- Mon Nov 18 21:36 GMT 2002
    DESCRIPTION
        "Added etsysStpDiagMstiPortNumber as an index to
         etsysStpDiagMstiPortTable."

    REVISION "200210102101Z"  -- Thu Oct 10 21:01 GMT 2002
    DESCRIPTION
        "The initial version of this MIB module"

    ::= { etsysModules 29 } 

etsysStpDiagObjects     
    OBJECT IDENTIFIER ::= { etsysSpanningTreeDiagnosticMIB 1 }


-- ---------------------------------------------------------- --
-- branches in the ENTERASYS-SPANNING-TREE-DIAGNOSTIC-MIB
-- ---------------------------------------------------------- --

etsysStpDiagControl      OBJECT IDENTIFIER ::= { etsysStpDiagObjects 1 }
etsysStpDiagCommon       OBJECT IDENTIFIER ::= { etsysStpDiagObjects 2 }
etsysStpDiagCistPort     OBJECT IDENTIFIER ::= { etsysStpDiagObjects 3 }
etsysStpDiagMsti         OBJECT IDENTIFIER ::= { etsysStpDiagObjects 4 }
etsysStpDiagMstiPort     OBJECT IDENTIFIER ::= { etsysStpDiagObjects 5 }
etsysStpDiagRootHistory  OBJECT IDENTIFIER ::= { etsysStpDiagObjects 6 }


-- ---------------------------------------------------------- --
-- Spanning Tree diagnostic MIB control info
-- ---------------------------------------------------------- --

etsysStpDiagCounterReset OBJECT-TYPE
    SYNTAX      INTEGER {
                    noOp(1),
                    reset(2)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Reading this object always returns noOp(1).  Writing the
         value noOp(1) has no effect.  Writing the value reset(2)
         to this object will cause all of the counters in this MIB
         module to be reset to zero.  Zeroing the counters in this
         MIB module MUST NOT effect the data presented in any other
         MIB module.  Zeroing the counters in this MIB module WILL
         affect all users of this MIB module.  It is expected that
         this MIB module will be used by only one person at a time,
         as counter resets will cause counter discontinuities for
         all users."
    ::= { etsysStpDiagControl 1 }

etsysStpDiagCounterResetElapsedTime OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "seconds"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of seconds since the counters in this MIB module
         were last reset to zero.  If the counters have not been
         reset to zero since the last initialization return the
         number of seconds since the last initialization."
    ::= { etsysStpDiagControl 2 }

etsysStpDiagCounterResetDateAndTime OBJECT-TYPE
    SYNTAX      DateAndTime
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The date and time at which the counters in this MIB module
         were last reset to zero.  If the counters have not been
         reset to zero since the last initialization return the
         date and time of the last initialization."
    ::= { etsysStpDiagControl 3 }


-- ---------------------------------------------------------- --
-- Common and Internal Spanning Tree diagnostic info
-- ---------------------------------------------------------- --

etsysStpDiagTopChanges           OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of topology changes.  This is a shadow copy
         of the dot1dStpTopChanges object from the IETF BRIDGE-MIB.
         Zeroing this object MUST NOT affect dot1dStpTopChanges."
    REFERENCE
        "IEEE P802.1s/D15 clause 12.8.1.1.3"
    ::= { etsysStpDiagCommon 1 }

etsysStpDiagCommonInvalidBpdu        OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The total number of invalid BPDUs received." 
    REFERENCE
        "IEEE P802.1s/D15 clause 14.4"
    ::= { etsysStpDiagCommon 2 }

etsysStpDiagCommonStpCfgBpduRx   OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The total number of 802.1D Configuration BPDUs received." 
    REFERENCE
        "IEEE P802.1s/D15 clause 14.3.1"
    ::= { etsysStpDiagCommon 3 }

etsysStpDiagCommonStpCfgBpduTx   OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The total number of 802.1D Configuration BPDUs transmitted." 
    REFERENCE
        "IEEE P802.1s/D15 clause 14.3.1"
    ::= { etsysStpDiagCommon 4 }

etsysStpDiagCommonStpTcnBpduRx   OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The total number of 802.1D Topology Change Notification
         BPDUs received." 
    REFERENCE
        "IEEE P802.1s/D15 clause 14.3.1"
    ::= { etsysStpDiagCommon 5 }

etsysStpDiagCommonStpTcnBpduTx   OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The total number of 802.1D Topology Change Notification
         BPDUs transmitted." 
    REFERENCE
        "IEEE P802.1s/D15 clause 14.3.1"
    ::= { etsysStpDiagCommon 6 }

etsysStpDiagCommonRstBpduRx      OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The total number of 802.1w BPDUs received." 
    REFERENCE
        "IEEE P802.1s/D15 clause 14.3.2"
    ::= { etsysStpDiagCommon 7 }

etsysStpDiagCommonRstBpduTx      OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The total number of 802.1w BPDUs transmitted." 
    REFERENCE
        "IEEE P802.1s/D15 clause 14.3.2"
    ::= { etsysStpDiagCommon 8 }

etsysStpDiagCommonRstTcRx        OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The total number of 802.1w BPDUs received with the
         Topology Change flag set.  These BPDUs are included
         in the overall count of 802.1w BPDUs received in the
         etsysStpDiagCommonRstBpduRx object."
    REFERENCE
        "IEEE P802.1s/D15 clause 14.3.2"
    ::= { etsysStpDiagCommon 9 }

etsysStpDiagCommonRstTcTx        OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The total number of 802.1w BPDUs transmitted with the
         Topology Change flag set.  These BPDUs are included
         in the overall count of 802.1w BPDUs transmitted in
         the etsysStpDiagCommonRstBpduTx object."
    REFERENCE
        "IEEE P802.1s/D15 clause 14.3.2"
    ::= { etsysStpDiagCommon 10 }

etsysStpDiagCommonMstBpduRx      OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The total number of 802.1s BPDUs received." 
    REFERENCE
        "IEEE P802.1s/D15 clause 14.3.3"
    ::= { etsysStpDiagCommon 11 }

etsysStpDiagCommonMstBpduTx      OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The total number of 802.1s BPDUs transmitted." 
    REFERENCE
        "IEEE P802.1s/D15 clause 14.3.3"
    ::= { etsysStpDiagCommon 12 }

etsysStpDiagCommonMstCistTcRx    OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The total number of 802.1s BPDUs received with the
         Topology Change flag set in the CIST Flags field. 
         These BPDUs are included in the overall count of 802.1s
         BPDUs received in the etsysStpDiagCommonMstBpduRx object."
    REFERENCE
        "IEEE P802.1s/D15 clause 14.3.3"
    ::= { etsysStpDiagCommon 13 }

etsysStpDiagCommonMstCistTcTx    OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The total number of 802.1s BPDUs transmitted with the
         Topology Change flag set in the CIST Flags field. 
         These BPDUs are included in the overall count of 802.1s
         BPDUs transmitted in the etsysStpDiagCommonMstBpduRx
         object."
    REFERENCE
        "IEEE P802.1s/D15 clause 14.3.3"
    ::= { etsysStpDiagCommon 14 }

etsysStpDiagCommonStpCfgBpduRxTcFlagSet   OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The total number of 802.1D Configuration BPDUs received
         with the Topology Change flag set. These BPDUs are included
         in the overall count of 802.1D Configuration BPDUs received
         in the etsysStpDiagCommonStpCfgBpduRx object."
    REFERENCE
        "IEEE P802.1s/D15 clause 14.3.1"
    ::= { etsysStpDiagCommon 15 }

etsysStpDiagCommonStpCfgBpduTxTcFlagSet   OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The total number of 802.1D Configuration BPDUs transmitted 
         with the Topology Change flag set. These BPDUs are included
         in the overall count of 802.1D Configuration BPDUs transmitted
         in the etsysStpDiagCommonStpCfgBpduTx object."
    REFERENCE
        "IEEE P802.1s/D15 clause 14.3.1"
    ::= { etsysStpDiagCommon 16 }

etsysStpDiagCommonDisputedBpdu            OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The total number of BPDUs received with inferior designated
         information and that have the learning flag set.  These
         BPDU's may indicate the presence of a one way communication
         path between adjacent bridge ports.  They can also occur as
         part of normal operation of a network, and may persist for a
         while during power up."
    REFERENCE
        "IEEE DRAFT P802.1y/D4 clause 17.19.25"
    ::= { etsysStpDiagCommon 17 }

etsysStpDiagMessageExpiration    OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of times the BPDU message timer expired.
         This indicates that BPDUs are not being received on
         a regular basis."
    ::= { etsysStpDiagCommon 28 }


-- ---------------------------------------------------------- --
-- Common and Internal Spanning Tree per port diagnostic info
-- ---------------------------------------------------------- --

etsysStpDiagCistPortTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF EtsysStpDiagCistPortEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A table that contains port level diagnostic information."
    ::= { etsysStpDiagCistPort 1 }

etsysStpDiagCistPortEntry OBJECT-TYPE
    SYNTAX      EtsysStpDiagCistPortEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A list of diagnostic information maintained for every port."
    INDEX { etsysStpDiagCistPortNumber }
    ::= { etsysStpDiagCistPortTable 1 }

EtsysStpDiagCistPortEntry ::=
    SEQUENCE { 
        etsysStpDiagCistPortNumber                      InterfaceIndex,
        etsysStpDiagCistPortRole                        INTEGER,
        etsysStpDiagCistPortInvalidBpdu                 Counter32,
        etsysStpDiagCistPortStpCfgBpduRx                Counter32,
        etsysStpDiagCistPortStpCfgBpduTx                Counter32,
        etsysStpDiagCistPortStpTcnBpduRx                Counter32,
        etsysStpDiagCistPortStpTcnBpduTx                Counter32,
        etsysStpDiagCistPortRstBpduRx                   Counter32,
        etsysStpDiagCistPortRstBpduTx                   Counter32,
        etsysStpDiagCistPortRstTcRx                     Counter32,
        etsysStpDiagCistPortRstTcTx                     Counter32,
        etsysStpDiagCistPortMstBpduRx                   Counter32,
        etsysStpDiagCistPortMstBpduTx                   Counter32,
        etsysStpDiagCistPortMstCistTcRx                 Counter32,
        etsysStpDiagCistPortMstCistTcTx                 Counter32,
        etsysStpDiagCistPortExpiration                  Counter32,
        etsysStpDiagCistPortStpCfgBpduRxTcFlagSet       Counter32,
        etsysStpDiagCistPortStpCfgBpduTxTcFlagSet       Counter32,
        etsysStpDiagCistPortDisputedBpdu                Counter32
    }

etsysStpDiagCistPortNumber OBJECT-TYPE
    SYNTAX      InterfaceIndex
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The port number of the port for which this entry
         contains Spanning Tree Protocol diagnostic information."
    REFERENCE
        "IEEE P802.1s/D15 clause 12.8.2"
    ::= { etsysStpDiagCistPortEntry 1 }

etsysStpDiagCistPortRole   OBJECT-TYPE
    SYNTAX      INTEGER {
                    disabled(1),
                    root(2),
                    designated(3),
                    alternate(4),
                    backUp(5),
                    master(6)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates the port role for RST and MST:
             disabled   - This port has no role.
             root       - This port has the role of root port.
             designated - This port has the role of designated port.
             alternate  - This port has the role of alternate port.
             backUp     - This port has the role of backup port.
             master     - This port has the role of master port."
    REFERENCE
        "IEEE P802.1s/D15 clause 13.12"
    ::= { etsysStpDiagCistPortEntry 2 }

etsysStpDiagCistPortInvalidBpdu        OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The total number of invalid BPDUs received on this port." 
    REFERENCE
        "IEEE P802.1s/D15 clause 14.4"
    ::= { etsysStpDiagCistPortEntry 3 }

etsysStpDiagCistPortStpCfgBpduRx   OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The total number of 802.1D Configuration BPDUs received
         on this port." 
    REFERENCE
        "IEEE P802.1s/D15 clause 14.3.1"
    ::= { etsysStpDiagCistPortEntry 4 }

etsysStpDiagCistPortStpCfgBpduTx   OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The total number of 802.1D Configuration BPDUs transmitted
         on this port." 
    REFERENCE
        "IEEE P802.1s/D15 clause 14.3.1"
    ::= { etsysStpDiagCistPortEntry 5 }

etsysStpDiagCistPortStpTcnBpduRx   OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The total number of 802.1D Topology Change Notification
         BPDUs received on this port." 
    REFERENCE
        "IEEE P802.1s/D15 clause 14.3.1"
    ::= { etsysStpDiagCistPortEntry 6 }

etsysStpDiagCistPortStpTcnBpduTx   OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The total number of 802.1D Topology Change Notification
         BPDUs transmitted on this port." 
    REFERENCE
        "IEEE P802.1s/D15 clause 14.3.1"
    ::= { etsysStpDiagCistPortEntry 7 }

etsysStpDiagCistPortRstBpduRx      OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The total number of 802.1w BPDUs received on this port." 
    REFERENCE
        "IEEE P802.1s/D15 clause 14.3.2"
    ::= { etsysStpDiagCistPortEntry 8 }

etsysStpDiagCistPortRstBpduTx      OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The total number of 802.1w BPDUs transmitted on this port." 
    REFERENCE
        "IEEE P802.1s/D15 clause 14.3.2"
    ::= { etsysStpDiagCistPortEntry 9 }

etsysStpDiagCistPortRstTcRx        OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The total number of 802.1w BPDUs received on this port
         with the Topology Change flag set.  These BPDUs are
         included in the overall count of 802.1w BPDUs received
         in the etsysStpDiagCistPortRstBpduRx object."
    REFERENCE
        "IEEE P802.1s/D15 clause 14.3.2"
    ::= { etsysStpDiagCistPortEntry 10 }

etsysStpDiagCistPortRstTcTx        OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The total number of 802.1w BPDUs transmitted on this
         port with the Topology Change flag set.  These BPDUs
         are included in the overall count of 802.1w BPDUs
         transmitted in the etsysStpDiagCistPortRstBpduTx object."
    REFERENCE
        "IEEE P802.1s/D15 clause 14.3.2"
    ::= { etsysStpDiagCistPortEntry 11 }

etsysStpDiagCistPortMstBpduRx      OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The total number of 802.1s BPDUs received on this port." 
    REFERENCE
        "IEEE P802.1s/D15 clause 14.3.3"
    ::= { etsysStpDiagCistPortEntry 12 }

etsysStpDiagCistPortMstBpduTx      OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The total number of 802.1s BPDUs transmitted on this port." 
    REFERENCE
        "IEEE P802.1s/D15 clause 14.3.3"
    ::= { etsysStpDiagCistPortEntry 13 }

etsysStpDiagCistPortMstCistTcRx    OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The total number of 802.1s BPDUs received on this port
         with the Topology Change flag set in the CIST Flags field. 
         These BPDUs are included in the overall count of 802.1s
         BPDUs received in the etsysStpDiagCistPortMstBpduRx object."
    REFERENCE
        "IEEE P802.1s/D15 clause 14.3.3"
    ::= { etsysStpDiagCistPortEntry 14 }

etsysStpDiagCistPortMstCistTcTx    OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The total number of 802.1s BPDUs transmitted on this port
         with the Topology Change flag set in the CIST Flags field. 
         These BPDUs are included in the overall count of 802.1s
         BPDUs transmitted in the etsysStpDiagCistPortMstBpduRx object."
    REFERENCE
        "IEEE P802.1s/D15 clause 14.3.3"
    ::= { etsysStpDiagCistPortEntry 15 }

etsysStpDiagCistPortExpiration     OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of times the BPDU message timer expired.
         This indicates that BPDUs are not being received on
         a regular basis."
    ::= { etsysStpDiagCistPortEntry 16 }

etsysStpDiagCistPortStpCfgBpduRxTcFlagSet   OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The total number of 802.1D Configuration BPDUs received
         on this port with the Topology Change flag set. These BPDUs
         are included in the overall count of 802.1D Configuration
         BPDUs received in the etsysStpDiagCistPortStpCfgBpduRx
         object."
    REFERENCE
        "IEEE P802.1s/D15 clause 14.3.1"
    ::= { etsysStpDiagCistPortEntry 17 }

etsysStpDiagCistPortStpCfgBpduTxTcFlagSet   OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The total number of 802.1D Configuration BPDUs transmitted
         on this port with the Topology Change flag set. These BPDUs
         are included in the overall count of 802.1D Configuration
         BPDUs transmitted in the etsysStpDiagCistPortStpCfgBpduRx
         object."
    REFERENCE
        "IEEE P802.1s/D15 clause 14.3.1"
    ::= { etsysStpDiagCistPortEntry 18 }

etsysStpDiagCistPortDisputedBpdu        OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The total number of BPDUs received on this port with inferior
         designated information and that have the learning flag set.
         These BPDU's may indicate the presence of a one way
         communication path between adjacent bridge ports.  They can
         also occur as part of normal operation of a network, and may
         persist for a while during power up."
    REFERENCE
        "IEEE DRAFT P802.1y/D4 clause 17.19.25"
    ::= { etsysStpDiagCistPortEntry 19 }


-- ---------------------------------------------------------- --
-- Multiple Spanning Tree Instance diagnostic info
-- ---------------------------------------------------------- --

etsysStpDiagMstiTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF EtsysStpDiagMstiEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A table that contains diagnostic information for each
         IEEE 802.1s Multiple Spanning Tree Instance."
    ::= { etsysStpDiagMsti 1 }

etsysStpDiagMstiEntry OBJECT-TYPE
    SYNTAX      EtsysStpDiagMstiEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A list of diagnostic information for each IEEE 802.1s
         Multiple Spanning Tree Instance that is configured."
    INDEX { etsysStpDiagMstiId }
    ::= { etsysStpDiagMstiTable 1 }

EtsysStpDiagMstiEntry ::=
    SEQUENCE { 
        etsysStpDiagMstiId                          Unsigned32,
        etsysStpDiagMstiTopChanges                  Counter32,
        etsysStpDiagMstiConfigMsgRx                 Counter32,
        etsysStpDiagMstiConfigMsgTx                 Counter32,
        etsysStpDiagMstiTcRx                        Counter32,
        etsysStpDiagMstiTcTx                        Counter32,
        etsysStpDiagMstiDisputedBpdu                Counter32
    }

etsysStpDiagMstiId                      OBJECT-TYPE
    SYNTAX      Unsigned32 (1..4094)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The unique ID of this Multiple Spanning Tree instance.
         The CIST (common and internal spanning tree) is not
         represented in this table.  There are a maximum of
         sixty-four MSTIs, each with a unique identifier in
         the range of 1-4094."
    REFERENCE
        "IEEE P802.1s/D15 clause 12.8.1.2.2"
    ::= { etsysStpDiagMstiEntry 1 }

etsysStpDiagMstiTopChanges              OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The total number of topology changes detected on
         this Mulitple Spanning Tree Instance."
    REFERENCE
        "IEEE P802.1s/D15 clause 12.8.1.2.3"
    ::= { etsysStpDiagMstiEntry 2 }

etsysStpDiagMstiConfigMsgRx             OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The total number of 802.1s BPDUs received with MSTI
         Configuration Messages for this MSTI."
    REFERENCE
        "IEEE P802.1s/D15 clause 14.6.1"
    ::= { etsysStpDiagMstiEntry 3 }

etsysStpDiagMstiConfigMsgTx             OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The total number of 802.1s BPDUs transmitted with MSTI
         Configuration Messages for this MSTI."
    REFERENCE
        "IEEE P802.1s/D15 clause 14.6.1"
    ::= { etsysStpDiagMstiEntry 4 }

etsysStpDiagMstiTcRx                    OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The total number of 802.1s BPDUs received with MSTI
         Configuration Messages for this MSTI that had the
         Topology Change flag set in the MSTI Flags field."
    REFERENCE
        "IEEE P802.1s/D15 clause 14.6.1"
    ::= { etsysStpDiagMstiEntry 5 }

etsysStpDiagMstiTcTx                    OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The total number of 802.1s BPDUs transmitted with MSTI
         Configuration Messages for this MSTI that had the
         Topology Change flag set in the MSTI Flags field."
    REFERENCE
        "IEEE P802.1s/D15 clause 14.6.1"
    ::= { etsysStpDiagMstiEntry 6 }

etsysStpDiagMstiDisputedBpdu            OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The total number of BPDUs received on this MSTI with inferior
         designated information and that have the learning flag set.
         These BPDU's may indicate the presence of a one way
         communication path between adjacent bridge ports.  They can
         also occur as part of normal operation of a network, and may
         persist for a while during power up."
    REFERENCE
        "IEEE DRAFT P802.1y/D4 clause 17.19.25"
    ::= { etsysStpDiagMstiEntry 7 }


-- ---------------------------------------------------------- --
-- Multiple Spanning Tree Instance per port diagnostic info
-- ---------------------------------------------------------- --

etsysStpDiagMstiPortTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF EtsysStpDiagMstiPortEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A table that contains diagnostic information for each port
         on every IEEE 802.1s Multiple Spanning Tree Instance."
    ::= { etsysStpDiagMstiPort 1 }

etsysStpDiagMstiPortEntry OBJECT-TYPE
    SYNTAX      EtsysStpDiagMstiPortEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A list of diagnostic information for each port on every IEEE
         802.1s Multiple Spanning Tree Instance that is configured."
    INDEX { etsysStpDiagMstiPortMstiId, etsysStpDiagMstiPortNumber }
    ::= { etsysStpDiagMstiPortTable 1 }

EtsysStpDiagMstiPortEntry ::=
    SEQUENCE { 
        etsysStpDiagMstiPortMstiId                      Unsigned32,
        etsysStpDiagMstiPortNumber                      InterfaceIndex,
        etsysStpDiagMstiPortTopChanges                  Counter32,
        etsysStpDiagMstiPortConfigMsgRx                 Counter32,
        etsysStpDiagMstiPortConfigMsgTx                 Counter32,
        etsysStpDiagMstiPortTcRx                        Counter32,
        etsysStpDiagMstiPortTcTx                        Counter32,
        etsysStpDiagMstiPortDisputedBpdu                Counter32
    }

etsysStpDiagMstiPortMstiId                  OBJECT-TYPE
    SYNTAX      Unsigned32 (1..4094)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The unique ID of this Multiple Spanning Tree instance.
         The CIST (common and internal spanning tree) is not
         represented in this table.  There are a maximum of
         sixty-four MSTIs, each with a unique identifier in
         the range of 1-4094."
    REFERENCE
        "IEEE P802.1s/D15 clause 12.8.1.2.2"
    ::= { etsysStpDiagMstiPortEntry 1 }

etsysStpDiagMstiPortNumber OBJECT-TYPE
    SYNTAX      InterfaceIndex
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The port number of the port for which this entry
         contains Spanning Tree Protocol diagnostic information."
    REFERENCE
        "IEEE P802.1s/D15 clause 12.8.2"
    ::= { etsysStpDiagMstiPortEntry 2 }

etsysStpDiagMstiPortTopChanges              OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      deprecated
    DESCRIPTION
        "The total number of topology changes detected on this
         Mulitple Spanning Tree Instance and port."
    REFERENCE
        "IEEE P802.1s/D15 clause 12.8.1.1.3"
    ::= { etsysStpDiagMstiPortEntry 3 }

etsysStpDiagMstiPortConfigMsgRx             OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The total number of 802.1s BPDUs received with MSTI
         Configuration Messages for this MSTI and port."
    REFERENCE
        "IEEE P802.1s/D15 clause 14.6.1"
    ::= { etsysStpDiagMstiPortEntry 4 }

etsysStpDiagMstiPortConfigMsgTx             OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The total number of 802.1s BPDUs transmitted with MSTI
         Configuration Messages for this MSTI and port."
    REFERENCE
        "IEEE P802.1s/D15 clause 14.6.1"
    ::= { etsysStpDiagMstiPortEntry 5 }

etsysStpDiagMstiPortTcRx                    OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The total number of 802.1s BPDUs received with MSTI
         Configuration Messages for this MSTI and port that had
         the Topology Change flag set in the MSTI Flags field."
    REFERENCE
        "IEEE P802.1s/D15 clause 14.6.1"
    ::= { etsysStpDiagMstiPortEntry 6 }

etsysStpDiagMstiPortTcTx                    OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The total number of 802.1s BPDUs transmitted with MSTI
         Configuration Messages for this MSTI and port that had
         the Topology Change flag set in the MSTI Flags field."
    REFERENCE
        "IEEE P802.1s/D15 clause 14.6.1"
    ::= { etsysStpDiagMstiPortEntry 7 }

etsysStpDiagMstiPortDisputedBpdu            OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The total number of BPDUs received on this MSTI and port
         with inferior designated information that have the learning
         flag set.  These BPDU's may indicate the presence of a one
         way communication path between adjacent bridge ports.  They
         can also occur as part of normal operation of a network,
         and may persist for a while during power up."
    REFERENCE
        "IEEE DRAFT P802.1y/D4 clause 17.19.25"
    ::= { etsysStpDiagMstiPortEntry 8 }


-- ---------------------------------------------------------- --
-- Spanning tree root history info
-- ---------------------------------------------------------- --

etsysStpDiagRootHistoryTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF EtsysStpDiagRootHistoryEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A table that contains a short history of the spanning tree
         root bridges."
    ::= { etsysStpDiagRootHistory 1 }

etsysStpDiagRootHistoryEntry OBJECT-TYPE
    SYNTAX      EtsysStpDiagRootHistoryEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The date and time that a particular bridge became the root."
    INDEX { etsysStpDiagRootHistoryStpID, etsysStpDiagRootHistoryIndex }
    ::= { etsysStpDiagRootHistoryTable 1 }

EtsysStpDiagRootHistoryEntry ::=
     SEQUENCE { 
         etsysStpDiagRootHistoryStpID                Unsigned32,
         etsysStpDiagRootHistoryIndex                Unsigned32,
         etsysStpDiagRootHistoryBridgeID             BridgeId,
         etsysStpDiagRootHistoryDateAndTime          DateAndTime
     }

etsysStpDiagRootHistoryStpID OBJECT-TYPE
    SYNTAX      Unsigned32 (0..4094)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The unique ID of this Spanning Tree instance.  The
         value zero represents the CIST.  There are a maximum
         of sixty-four MSTIs, each with a unique identifier in
         the range of 1-4094."
    REFERENCE
        "IEEE P802.1s/D15 clause 12.8.1.2.2"
    ::= { etsysStpDiagRootHistoryEntry 1 }

etsysStpDiagRootHistoryIndex OBJECT-TYPE
    SYNTAX      Unsigned32 (1..10)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "An index for the root bridge entry.  The index value of
         one represents the most recent entry, and the value of
         ten represents the oldest entry."
    ::= { etsysStpDiagRootHistoryEntry 2 }

etsysStpDiagRootHistoryBridgeID OBJECT-TYPE
    SYNTAX      BridgeId
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The bridge identifier of the bridge that this entry
         represents."
    REFERENCE
        "IEEE P802.1s/D15 clauses 12.8.1.1.3 and 12.8.1.2.3"
    ::= { etsysStpDiagRootHistoryEntry 3 }

etsysStpDiagRootHistoryDateAndTime OBJECT-TYPE
    SYNTAX      DateAndTime
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The date and time that this bridge became root."
    ::= { etsysStpDiagRootHistoryEntry 4 }


-- -------------------------------------------------------------
-- Conformance Information
-- -------------------------------------------------------------

etsysStpDiagConformance
    OBJECT IDENTIFIER ::= { etsysSpanningTreeDiagnosticMIB 2 }

etsysStpDiagGroups
    OBJECT IDENTIFIER ::= { etsysStpDiagConformance 1 }

etsysStpDiagCompliances
    OBJECT IDENTIFIER ::= { etsysStpDiagConformance 2 }


-- -------------------------------------------------------------
-- Units of conformance
-- -------------------------------------------------------------

etsysStpDiagDot1dGroup OBJECT-GROUP
    OBJECTS {
        etsysStpDiagCounterReset,
        etsysStpDiagCounterResetElapsedTime,
        etsysStpDiagCounterResetDateAndTime,
        etsysStpDiagTopChanges,
        etsysStpDiagCommonInvalidBpdu,
        etsysStpDiagCommonStpCfgBpduRx,
        etsysStpDiagCommonStpCfgBpduTx,
        etsysStpDiagCommonStpTcnBpduRx,
        etsysStpDiagCommonStpTcnBpduTx,
        etsysStpDiagCommonStpCfgBpduRxTcFlagSet,
        etsysStpDiagCommonStpCfgBpduTxTcFlagSet,
        etsysStpDiagCistPortNumber,
        etsysStpDiagCistPortRole,
        etsysStpDiagCistPortInvalidBpdu,
        etsysStpDiagCistPortStpCfgBpduRx,
        etsysStpDiagCistPortStpCfgBpduTx,
        etsysStpDiagCistPortStpTcnBpduRx,
        etsysStpDiagCistPortStpTcnBpduTx,
        etsysStpDiagCistPortStpCfgBpduRxTcFlagSet,
        etsysStpDiagCistPortStpCfgBpduTxTcFlagSet,
        etsysStpDiagCistPortExpiration
    }
    STATUS      current
    DESCRIPTION
        "A collection of objects providing per spanning tree level
         support for Spanning Tree Protocol diagnostics."
    ::= { etsysStpDiagGroups 1 }

etsysStpDiagDot1wGroup OBJECT-GROUP
    OBJECTS {
        etsysStpDiagCommonRstBpduRx,
        etsysStpDiagCommonRstBpduTx,
        etsysStpDiagCommonRstTcRx,
        etsysStpDiagCommonRstTcTx,
        etsysStpDiagCistPortRstBpduRx,
        etsysStpDiagCistPortRstBpduTx,
        etsysStpDiagCistPortRstTcRx,
        etsysStpDiagCistPortRstTcTx
    }
    STATUS      current
    DESCRIPTION
        "A collection of objects providing per spanning tree level
         support for Spanning Tree Protocol diagnostics."
    ::= { etsysStpDiagGroups 2 }

etsysStpDiagDot1sGroup OBJECT-GROUP
    OBJECTS {
        etsysStpDiagCommonMstBpduRx,
        etsysStpDiagCommonMstBpduTx,
        etsysStpDiagCommonMstCistTcRx,
        etsysStpDiagCommonMstCistTcTx,
        etsysStpDiagCistPortMstBpduRx,
        etsysStpDiagCistPortMstBpduTx,
        etsysStpDiagCistPortMstCistTcRx,
        etsysStpDiagCistPortMstCistTcTx,
        etsysStpDiagMstiId,
        etsysStpDiagMstiTopChanges,
        etsysStpDiagMstiConfigMsgRx,
        etsysStpDiagMstiConfigMsgTx,
        etsysStpDiagMstiTcRx,
        etsysStpDiagMstiTcTx,
        etsysStpDiagMstiPortMstiId,
        etsysStpDiagMstiPortNumber,
        etsysStpDiagMstiPortTopChanges,
        etsysStpDiagMstiPortConfigMsgRx,
        etsysStpDiagMstiPortConfigMsgTx,
        etsysStpDiagMstiPortTcRx,
        etsysStpDiagMstiPortTcTx
    }
    STATUS      current
    DESCRIPTION
        "A collection of objects providing per spanning tree level
         support for Spanning Tree Protocol diagnostics."
    ::= { etsysStpDiagGroups 3 }

etsysStpDiagHistoryGroup OBJECT-GROUP
    OBJECTS {
        etsysStpDiagRootHistoryStpID,
        etsysStpDiagRootHistoryIndex,
        etsysStpDiagRootHistoryBridgeID,
        etsysStpDiagRootHistoryDateAndTime
    }
    STATUS      current
    DESCRIPTION
        "A collection of objects providing historical root
         bridge information."
    ::= { etsysStpDiagGroups 4 }


-- -------------------------------------------------------------
-- Compliance statements
-- -------------------------------------------------------------

etsysStpDiagCompliance MODULE-COMPLIANCE
    STATUS      current
    DESCRIPTION
        "The compliance statement for devices that support the
         Spanning Tree Diagnostic MIB."

    MODULE
        MANDATORY-GROUPS {
            etsysStpDiagDot1dGroup
        }

    GROUP etsysStpDiagDot1wGroup
    DESCRIPTION
        "Event counters for IEEE 802.1w implementations."

    GROUP etsysStpDiagDot1sGroup
    DESCRIPTION
        "Event counters for IEEE 802.1s implementations."

    GROUP etsysStpDiagHistoryGroup
    DESCRIPTION
        "Root bridge history information."

    ::= { etsysStpDiagCompliances 1 }

END