| rtgIndex |
.1.3.6.1.4.1.562.2.4.1.40.1.1.10 |
|
This variable represents the index for the rtg tables.
|
| rtgRowStatus |
.1.3.6.1.4.1.562.2.4.1.40.1.1.1 |
|
This variable is used as the basis for SNMP naming of
rtg components.
These components can be added.
|
| rtgComponentName |
.1.3.6.1.4.1.562.2.4.1.40.1.1.2 |
|
This variable provides the component's string name for
use with the ASCII Console Interface
|
| rtgStorageType |
.1.3.6.1.4.1.562.2.4.1.40.1.1.4 |
|
This variable represents the storage type value for the
rtg tables.
|
| rtgTandemTraffic |
.1.3.6.1.4.1.562.2.4.1.40.12.1.1 |
|
This attribute specifies whether tandem traffic is permitted through
the node.
Tandem traffic is traffic which arrives at the node on a trunk and
leaves the node on a trunk. Traffic to or from a gateway (internal or
external) is not affected by the setting of this attribute.
The default value of this attribute is allowed, which permits tandem
traffic to be routed through the node. When this attribute is set to
denied, DPN, VNS, and PORS traffic are not permitted to tandem
through the node.
Changing this attribute has no effect on PORS calls which were set
up before the change. These calls can be manually forced to reroute
using the new setting by clearing the calls or locking the trunks on
which they are routed.
|
| rtgSplittingRegionIdsValue |
.1.3.6.1.4.1.562.2.4.1.40.407.1.1 |
|
This variable represents both the value and the index for the
rtgSplittingRegionIdsTable.
|
| rtgSplittingRegionIdsRowStatus |
.1.3.6.1.4.1.562.2.4.1.40.407.1.2 |
|
This variable is used to control the addition and deletion
of individual values of the rtgSplittingRegionIdsTable.
|
| rtgTopIndex |
.1.3.6.1.4.1.562.2.4.1.40.5.1.1.10 |
|
This variable represents the index for the rtgTop tables.
|
| rtgTopRowStatus |
.1.3.6.1.4.1.562.2.4.1.40.5.1.1.1 |
|
This variable is used as the basis for SNMP naming of
rtgTop components.
These components cannot be added nor deleted.
|
| rtgTopComponentName |
.1.3.6.1.4.1.562.2.4.1.40.5.1.1.2 |
|
This variable provides the component's string name for
use with the ASCII Console Interface
|
| rtgTopStorageType |
.1.3.6.1.4.1.562.2.4.1.40.5.1.1.4 |
|
This variable represents the storage type value for the
rtgTop tables.
|
| rtgTopControlPktRx |
.1.3.6.1.4.1.562.2.4.1.40.5.11.1.1 |
|
This attribute shows the total number of topology routing control
packets which have been received by this node from other Passport
nodes in the network.
|
| rtgTopControlBytesRx |
.1.3.6.1.4.1.562.2.4.1.40.5.11.1.2 |
|
This attribute shows the total number of topology routing control
packet bytes received by this node from other Passport nodes in the
network.
|
| rtgTopControlPktTx |
.1.3.6.1.4.1.562.2.4.1.40.5.11.1.3 |
|
This attribute shows the total number of topology routing control
packets which have been sent by this node to other Passport nodes
in the network.
|
| rtgTopControlBytesTx |
.1.3.6.1.4.1.562.2.4.1.40.5.11.1.4 |
|
This attribute shows the total number of topology routing control
packet bytes sent by this node to other Passport nodes in the
network.
|
| rtgTopNodeIndex |
.1.3.6.1.4.1.562.2.4.1.40.5.2.1.1.10 |
|
This variable represents the index for the rtgTopNode tables.
|
| rtgTopNodeRowStatus |
.1.3.6.1.4.1.562.2.4.1.40.5.2.1.1.1 |
|
This variable is used as the basis for SNMP naming of
rtgTopNode components.
These components cannot be added nor deleted.
|
| rtgTopNodeComponentName |
.1.3.6.1.4.1.562.2.4.1.40.5.2.1.1.2 |
|
This variable provides the component's string name for
use with the ASCII Console Interface
|
| rtgTopNodeStorageType |
.1.3.6.1.4.1.562.2.4.1.40.5.2.1.1.4 |
|
This variable represents the storage type value for the
rtgTopNode tables.
|
| rtgTopNodeNodeId |
.1.3.6.1.4.1.562.2.4.1.40.5.2.10.1.1 |
|
The nodeId is a number that uniquely identifies the Node
component instance in the Passport network. It is the identifier used
in the routing control packets sent by this node to other Passport
nodes in the network.
The nodeId, for each node in the network, is learned from the
Passport routing protocol packets.
|
| rtgTopNodeLgIndex |
.1.3.6.1.4.1.562.2.4.1.40.5.2.2.1.1.10 |
|
This variable represents the index for the rtgTopNodeLg tables.
|
| rtgTopNodeLgRowStatus |
.1.3.6.1.4.1.562.2.4.1.40.5.2.2.1.1.1 |
|
This variable is used as the basis for SNMP naming of
rtgTopNodeLg components.
These components cannot be added nor deleted.
|
| rtgTopNodeLgComponentName |
.1.3.6.1.4.1.562.2.4.1.40.5.2.2.1.1.2 |
|
This variable provides the component's string name for
use with the ASCII Console Interface
|
| rtgTopNodeLgStorageType |
.1.3.6.1.4.1.562.2.4.1.40.5.2.2.1.1.4 |
|
This variable represents the storage type value for the
rtgTopNodeLg tables.
|
| rtgTopNodeLgDelayMetric |
.1.3.6.1.4.1.562.2.4.1.40.5.2.2.10.1.1 |
|
This attribute specifies the outbound cost to forward packets across
the trunk group for a delay class of service. It represents the trunk in
the trunk group with the lowest round trip delay. A low outbound
cost is preferable to a higher value as it is associated with higher
speed facilities.
A metric value of 2147483647 means that the trunk group is
unusable for the delay class of service.
|
| rtgTopNodeLgTputMetric |
.1.3.6.1.4.1.562.2.4.1.40.5.2.2.10.1.2 |
|
This attribute specifies the outbound cost to forward packets across
the trunk group for a throughput class of service. It is computed
from the combined speed of each link in the trunk group. A low
outbound cost is preferable to a higher value as it is associated with
higher speed facilities.
A metric value of 2147483647 means that the trunk group is
unusable for the throughput class of service.
|
| rtgTopNodeLgLnnValue |
.1.3.6.1.4.1.562.2.4.1.40.5.2.2.235.1.1 |
|
This variable represents both the value and the index for the
rtgTopNodeLgLnnTable.
|
| rtgTopNodeLgTrkObjIndex |
.1.3.6.1.4.1.562.2.4.1.40.5.2.2.2.1.1.10 |
|
This variable represents the index for the rtgTopNodeLgTrkObj tables.
|
| rtgTopNodeLgTrkObjRowStatus |
.1.3.6.1.4.1.562.2.4.1.40.5.2.2.2.1.1.1 |
|
This variable is used as the basis for SNMP naming of
rtgTopNodeLgTrkObj components.
These components cannot be added nor deleted.
|
| rtgTopNodeLgTrkObjComponentName |
.1.3.6.1.4.1.562.2.4.1.40.5.2.2.2.1.1.2 |
|
This variable provides the component's string name for
use with the ASCII Console Interface
|
| rtgTopNodeLgTrkObjStorageType |
.1.3.6.1.4.1.562.2.4.1.40.5.2.2.2.1.1.4 |
|
This variable represents the storage type value for the
rtgTopNodeLgTrkObj tables.
|
| rtgTopNodeLgTrkObjMaxReservableBwOut |
.1.3.6.1.4.1.562.2.4.1.40.5.2.2.2.10.1.1 |
|
This attribute displays trunk bandwidth which can be used for
reservations on behalf of connections requiring path oriented
routing. This bandwidth is displayed in bit/s and has been calculated
by concerned trunk path administrator from the trunk bandwidth
and from the percentage of trunk bandwidth provisioned for
reservations by PORS.
|
| rtgTopNodeLgTrkObjTrunkCost |
.1.3.6.1.4.1.562.2.4.1.40.5.2.2.2.10.1.2 |
|
This attribute displays trunk cost metric provisioned as trunkCost
attribute of a concerned trunk path administrator.
|
| rtgTopNodeLgTrkObjTrunkDelay |
.1.3.6.1.4.1.562.2.4.1.40.5.2.2.2.10.1.3 |
|
This attribute displays one-directional trunk delay measured by
trunk during staging. This is half (rounded down to an integer) of
delay displayable by attribute of ID aTrmLinkDelay_c.
|
| rtgTopNodeLgTrkObjTrunkSecurity |
.1.3.6.1.4.1.562.2.4.1.40.5.2.2.2.10.1.4 |
|
This attribute displays trunk security metric provisioned as
trunkSecurity attribute of a concerned trunk path administrator.
|
| rtgTopNodeLgTrkObjSupportedTrafficTypes |
.1.3.6.1.4.1.562.2.4.1.40.5.2.2.2.10.1.5 |
|
This attribute indicates the type of traffic that can be transmitted on
the trunk. There are eight(8) possible traffic types, and the trunk can
transmit all of them if desired. The voice, data and video traffic
types are defined, and five(5) other traffic types can be defined in
concerned trunk path administrator. This attribute is used in the
route selection process to limit the route to trunks that support the
traffic to be carried by the path.
Description of bits:
voice(0)
data(1)
video(2)
trafficType1(3)
trafficType2(4)
trafficType3(5)
trafficType4(6)
trafficType5(7)
|
| rtgTopNodeLgTrkObjTrunkType |
.1.3.6.1.4.1.562.2.4.1.40.5.2.2.2.10.1.6 |
|
This attribute lists the type of the trunk. There can be up to eight(8)
types of trunks. The terrestrial and satellite trunk types have been
defined, leaving six(6) remaining types that can be defined by the
network administration. The set of allowed trunk types for a path is
indicated in the permittedTrunkType attribute of the PLC. When
selecting a route, PORS only chooses trunks whose PA trunkType
are in the permittedTrunkTypes set of the path.
|
| rtgTopNodeLgTrkObjCustomerParameter |
.1.3.6.1.4.1.562.2.4.1.40.5.2.2.2.10.1.7 |
|
This attribute indicates the customer defined parameter for the
trunk. Its value, a number from zero(0) to seven(7), is chosen by a
network administration to have a meaning specific to their network,
thus allowing them to customize the use of their trunks. A
complementary PLC attribute, requiredCustomerParameter, also has
a value from zero(0) to seven(7). The Route Selector does not
consider trunks whose PA customerParameter is greater than the
requiredCustomParameter of the path.
|
| rtgTopNodeLgTrkObjFarEndTrmLkInstance |
.1.3.6.1.4.1.562.2.4.1.40.5.2.2.2.10.1.8 |
|
This attribute indicates identification of the corresponding trunk
providing the reverse direction of transmission.
|
| rtgTopNodeLgTrkObjUnresSetupPriorityIndex |
.1.3.6.1.4.1.562.2.4.1.40.5.2.2.2.234.1.1 |
|
This variable represents the next to last index for the
rtgTopNodeLgTrkObjUnresTable.
|
| rtgTopNodeLgTrkObjUnresUnreservedBwPartsIndex |
.1.3.6.1.4.1.562.2.4.1.40.5.2.2.2.234.1.2 |
|
This variable represents the final index for the
rtgTopNodeLgTrkObjUnresTable.
|
| rtgTopNodeLgTrkObjUnresValue |
.1.3.6.1.4.1.562.2.4.1.40.5.2.2.2.234.1.3 |
|
This variable represents an individual value for the
rtgTopNodeLgTrkObjUnresTable.
|
| trmIndex |
.1.3.6.1.4.1.562.2.4.1.41.1.1.10 |
|
This variable represents the index for the trm tables.
|
| trmRowStatus |
.1.3.6.1.4.1.562.2.4.1.41.1.1.1 |
|
This variable is used as the basis for SNMP naming of
trm components.
These components cannot be added nor deleted.
|
| trmComponentName |
.1.3.6.1.4.1.562.2.4.1.41.1.1.2 |
|
This variable provides the component's string name for
use with the ASCII Console Interface
|
| trmStorageType |
.1.3.6.1.4.1.562.2.4.1.41.1.1.4 |
|
This variable represents the storage type value for the
trm tables.
|
| trmLkIndex |
.1.3.6.1.4.1.562.2.4.1.41.2.1.1.10 |
|
This variable represents the index for the trmLk tables.
|
| trmLkRowStatus |
.1.3.6.1.4.1.562.2.4.1.41.2.1.1.1 |
|
This variable is used as the basis for SNMP naming of
trmLk components.
These components cannot be added nor deleted.
|
| trmLkComponentName |
.1.3.6.1.4.1.562.2.4.1.41.2.1.1.2 |
|
This variable provides the component's string name for
use with the ASCII Console Interface
|
| trmLkStorageType |
.1.3.6.1.4.1.562.2.4.1.41.2.1.1.4 |
|
This variable represents the storage type value for the
trmLk tables.
|
| trmLkStatus |
.1.3.6.1.4.1.562.2.4.1.41.2.10.1.1 |
|
This attribute indicates if the inactive link is disabled, joining,
waiting to join, or in standby mode.
inactive - The link is known to TRM but is not active. This can
mean that it is disabled, or has not yet started to join.
joining - The link has requested to join the routing systems.
online- The link is active and has joined one or more routing
systems.
|
| trmLkThroughput |
.1.3.6.1.4.1.562.2.4.1.41.2.10.1.2 |
|
This attribute indicates the throughput of the link in kbit/s. This
value represents a nominal bandwidth available for connectionless
traffic, after the maximum reserved for path-oriented traffic has
been subtracted from trunk bandwidth. If a trunk speed override is
specified, it is used instead. The 'throughput' value can be
exceeded by connectionless traffic whenever path-oriented traffic is
not using it's reserved bandwidth.
|
| trmLkDelay |
.1.3.6.1.4.1.562.2.4.1.41.2.10.1.3 |
|
This is the round trip delay of the link in milliseconds. This value
represents a nominal delay for connectionless traffic.
Connectionless traffic is biased away from trunks carrying path-
oriented traffic by increasing this value. The value of this attribute is
a function of the percentage of reserved path-oriented bandwidth
and takes a maximum value of 1500 msec for 100% path-oriented
trunks. If an override delay is specified, it will be used instead.
|
| trmLkMaxTxUnit |
.1.3.6.1.4.1.562.2.4.1.41.2.10.1.4 |
|
This attribute indicates the maximum data unit in bytes of this link.
It represents the maximum frame length (including user data and
routing headers) that can be sent on the link.
|
| trmLkLinkComponentName |
.1.3.6.1.4.1.562.2.4.1.41.2.10.1.5 |
|
This attribute indicates the link's component name. A link is either
a trunk or a gateway to another module. The component name may
be used to obtain additional information from the link system.
|
| trmLkDelayUsec |
.1.3.6.1.4.1.562.2.4.1.41.2.10.1.6 |
|
This attribute indicates the round trip delay of the link in
milliseconds. This value represents a nominal delay for
connectionless traffic. Connectionless traffic is biased away from
trunks carrying path-oriented traffic by increasing this value. The
value of this attribute is a function of the percentage of reserved
path-oriented bandwidth and takes a maximum value of 1500 msec
for 100% path-oriented trunks. If a delay override is specified, it
will be used instead.
|
| trmLkFciSet |
.1.3.6.1.4.1.562.2.4.1.41.2.11.1.1 |
|
This attribute counts the packets whose FCI bits are set by packet
forwarding due to congestion on this link, and when the
forwardingPolicy attribute of Routing DpnAddressPlan is set to
loadshare or loadspread. This counter wraps around to zero when
the maximum value is reached.
|
| trmLkOverflowAttempts |
.1.3.6.1.4.1.562.2.4.1.41.2.11.1.2 |
|
This attribute counts the number of times DPRS packet forwarding
attempts to overflow packets to another link in a link group due to
congestion on this link. It is used only when the attribute
forwardingPolicy in component rtg dpn is set to the value
loadspreading. This counter wraps around to zero when the
maximum value is reached.
|
| trmLkPathOverflowAttempts |
.1.3.6.1.4.1.562.2.4.1.41.2.11.1.3 |
|
This attribute counts the number of times DPRS packet forwarding
attempts to overflow packets to another link group due to
congestion on the link group of this link. This counter wraps around
to zero when the maximum value is reached.
|
| trmLkDiscardCongestedIndex |
.1.3.6.1.4.1.562.2.4.1.41.2.280.1.1 |
|
This variable represents the trmLkDiscardCongestedTable
specific index for the trmLkDiscardCongestedTable.
|
| trmLkDiscardCongestedValue |
.1.3.6.1.4.1.562.2.4.1.41.2.280.1.2 |
|
This variable represents an individual value for the
trmLkDiscardCongestedTable.
|
| trmLgIndex |
.1.3.6.1.4.1.562.2.4.1.41.3.1.1.10 |
|
This variable represents the index for the trmLg tables.
|
| trmLgRowStatus |
.1.3.6.1.4.1.562.2.4.1.41.3.1.1.1 |
|
This variable is used as the basis for SNMP naming of
trmLg components.
These components cannot be added nor deleted.
|
| trmLgComponentName |
.1.3.6.1.4.1.562.2.4.1.41.3.1.1.2 |
|
This variable provides the component's string name for
use with the ASCII Console Interface
|
| trmLgStorageType |
.1.3.6.1.4.1.562.2.4.1.41.3.1.1.4 |
|
This variable represents the storage type value for the
trmLg tables.
|
| trmLgLkIndex |
.1.3.6.1.4.1.562.2.4.1.41.3.2.1.1.10 |
|
This variable represents the index for the trmLgLk tables.
|
| trmLgLkRowStatus |
.1.3.6.1.4.1.562.2.4.1.41.3.2.1.1.1 |
|
This variable is used as the basis for SNMP naming of
trmLgLk components.
These components cannot be added nor deleted.
|
| trmLgLkComponentName |
.1.3.6.1.4.1.562.2.4.1.41.3.2.1.1.2 |
|
This variable provides the component's string name for
use with the ASCII Console Interface
|
| trmLgLkStorageType |
.1.3.6.1.4.1.562.2.4.1.41.3.2.1.1.4 |
|
This variable represents the storage type value for the
trmLgLk tables.
|
| trmLgLkStatus |
.1.3.6.1.4.1.562.2.4.1.41.3.2.10.1.1 |
|
This attribute indicates if the inactive link is disabled, joining,
waiting to join, or in standby mode.
inactive - The link is known to TRM but is not active. This can
mean that it is disabled, or has not yet started to join.
joining - The link has requested to join the routing systems.
online- The link is active and has joined one or more routing
systems.
|
| trmLgLkThroughput |
.1.3.6.1.4.1.562.2.4.1.41.3.2.10.1.2 |
|
This attribute indicates the throughput of the link in kbit/s. This
value represents a nominal bandwidth available for connectionless
traffic, after the maximum reserved for path-oriented traffic has
been subtracted from trunk bandwidth. If a trunk speed override is
specified, it is used instead. The 'throughput' value can be
exceeded by connectionless traffic whenever path-oriented traffic is
not using it's reserved bandwidth.
|
| trmLgLkDelay |
.1.3.6.1.4.1.562.2.4.1.41.3.2.10.1.3 |
|
This is the round trip delay of the link in milliseconds. This value
represents a nominal delay for connectionless traffic.
Connectionless traffic is biased away from trunks carrying path-
oriented traffic by increasing this value. The value of this attribute is
a function of the percentage of reserved path-oriented bandwidth
and takes a maximum value of 1500 msec for 100% path-oriented
trunks. If an override delay is specified, it will be used instead.
|
| trmLgLkMaxTxUnit |
.1.3.6.1.4.1.562.2.4.1.41.3.2.10.1.4 |
|
This attribute indicates the maximum data unit in bytes of this link.
It represents the maximum frame length (including user data and
routing headers) that can be sent on the link.
|
| trmLgLkLinkComponentName |
.1.3.6.1.4.1.562.2.4.1.41.3.2.10.1.5 |
|
This attribute indicates the link's component name. A link is either
a trunk or a gateway to another module. The component name may
be used to obtain additional information from the link system.
|
| trmLgLkDelayUsec |
.1.3.6.1.4.1.562.2.4.1.41.3.2.10.1.6 |
|
This attribute indicates the round trip delay of the link in
milliseconds. This value represents a nominal delay for
connectionless traffic. Connectionless traffic is biased away from
trunks carrying path-oriented traffic by increasing this value. The
value of this attribute is a function of the percentage of reserved
path-oriented bandwidth and takes a maximum value of 1500 msec
for 100% path-oriented trunks. If a delay override is specified, it
will be used instead.
|
| trmLgLkFciSet |
.1.3.6.1.4.1.562.2.4.1.41.3.2.11.1.1 |
|
This attribute counts the packets whose FCI bits are set by packet
forwarding due to congestion on this link, and when the
forwardingPolicy attribute of Routing DpnAddressPlan is set to
loadshare or loadspread. This counter wraps around to zero when
the maximum value is reached.
|
| trmLgLkOverflowAttempts |
.1.3.6.1.4.1.562.2.4.1.41.3.2.11.1.2 |
|
This attribute counts the number of times DPRS packet forwarding
attempts to overflow packets to another link in a link group due to
congestion on this link. It is used only when the attribute
forwardingPolicy in component rtg dpn is set to the value
loadspreading. This counter wraps around to zero when the
maximum value is reached.
|
| trmLgLkPathOverflowAttempts |
.1.3.6.1.4.1.562.2.4.1.41.3.2.11.1.3 |
|
This attribute counts the number of times DPRS packet forwarding
attempts to overflow packets to another link group due to
congestion on the link group of this link. This counter wraps around
to zero when the maximum value is reached.
|
| trmLgLkDiscardCongestedIndex |
.1.3.6.1.4.1.562.2.4.1.41.3.2.280.1.1 |
|
This variable represents the trmLgLkDiscardCongestedTable
specific index for the trmLgLkDiscardCongestedTable.
|
| trmLgLkDiscardCongestedValue |
.1.3.6.1.4.1.562.2.4.1.41.3.2.280.1.2 |
|
This variable represents an individual value for the
trmLgLkDiscardCongestedTable.
|
| trmLgLNNIndex |
.1.3.6.1.4.1.562.2.4.1.41.3.3.1.1.10 |
|
This variable represents the index for the trmLgLNN tables.
|
| trmLgLNNRowStatus |
.1.3.6.1.4.1.562.2.4.1.41.3.3.1.1.1 |
|
This variable is used as the basis for SNMP naming of
trmLgLNN components.
These components cannot be added nor deleted.
|
| trmLgLNNComponentName |
.1.3.6.1.4.1.562.2.4.1.41.3.3.1.1.2 |
|
This variable provides the component's string name for
use with the ASCII Console Interface
|
| trmLgLNNStorageType |
.1.3.6.1.4.1.562.2.4.1.41.3.3.1.1.4 |
|
This variable represents the storage type value for the
trmLgLNN tables.
|
| trmLgLNNLinkType |
.1.3.6.1.4.1.562.2.4.1.41.3.3.10.1.1 |
|
This attribute indicates how the LNN is transported over the link
group. It can be one of three types:
trunk - the LNN is supported by Topology over a Passport to
Passport link
internal gateway - the LNN is supported by an address plan (but not
Topology) over a Passport to Passport link
external gateway - the LNN is supported by an address plan (but not
Topology) over a Passport to non-Passport link
|
| trmLgLNNAddressPlanComponentName |
.1.3.6.1.4.1.562.2.4.1.41.3.3.10.1.2 |
|
This attribute indicates the component name of the address plan
which owns the logical network number of this component.
|
| npiIndex |
.1.3.6.1.4.1.562.2.4.1.43.1.1.10 |
|
This variable represents the index for the npi tables.
|
| npiRowStatus |
.1.3.6.1.4.1.562.2.4.1.43.1.1.1 |
|
This variable is used as the basis for SNMP naming of
npi components.
These components cannot be added nor deleted.
|
| npiComponentName |
.1.3.6.1.4.1.562.2.4.1.43.1.1.2 |
|
This variable provides the component's string name for
use with the ASCII Console Interface
|
| npiStorageType |
.1.3.6.1.4.1.562.2.4.1.43.1.1.4 |
|
This variable represents the storage type value for the
npi tables.
|
| npiTotalDnas |
.1.3.6.1.4.1.562.2.4.1.43.10.1.1 |
|
This attribute holds the total number of Dnas that are in the
numbering plan. If this attribute is displayed in provisioning mode,
the number includes the Dnas that have been added/deleted in that
provisioning session, otherwise the number only includes the Dnas
that have been activated.
|
| npiDnaIndex |
.1.3.6.1.4.1.562.2.4.1.43.2.1.1.10 |
|
This variable represents the index for the npiDna tables.
|
| npiDnaRowStatus |
.1.3.6.1.4.1.562.2.4.1.43.2.1.1.1 |
|
This variable is used as the basis for SNMP naming of
npiDna components.
These components cannot be added nor deleted.
|
| npiDnaComponentName |
.1.3.6.1.4.1.562.2.4.1.43.2.1.1.2 |
|
This variable provides the component's string name for
use with the ASCII Console Interface
|
| npiDnaStorageType |
.1.3.6.1.4.1.562.2.4.1.43.2.1.1.4 |
|
This variable represents the storage type value for the
npiDna tables.
|
| npiDnaDestinationName |
.1.3.6.1.4.1.562.2.4.1.43.2.10.1.1 |
|
This attribute holds the Component Name of the application to
which the DNA belongs.
|
| rtgRowStatusTable |
.1.3.6.1.4.1.562.2.4.1.40.1 |
|
This entry controls the addition and deletion of
rtg components.
|
| rtgProvTable |
.1.3.6.1.4.1.562.2.4.1.40.12 |
|
This group contains the provisioning data for the routing system.
|
| rtgSplittingRegionIdsTable |
.1.3.6.1.4.1.562.2.4.1.40.407 |
|
This attribute is used only when splitting or merging existing
topology regions. It specifies which topology regions are in a
migration status. A node will only exchange topological
information with a connected node under the following conditions:
(i) the nodes belong to the same topology region, (ii) one of the
nodes is provisioned with the default regionId of 0, (iii) the
connected node's splittingRegionIds attribute is provisioned to
contain the local node's regionId value and the local node's
splittingRegionIds is also provisioned to contain the connected
node's regionId value when both two nodes' regionIds are different
and non-zero.
When this attribute is used during migration of regions, values for
the attribute are normally the old and new regionIds for the node.
Use of this attribute makes it possible to migrate existing topology
regions in the following cases: (i) splitting a topology region into
two without isolating a node, (ii) merging two different topology
regions into one without introducing an extra topological barrier.
The attribute should be cleaned when all migration activities are
complete. At this point, the region boundary will take effect.
|
| rtgTopRowStatusTable |
.1.3.6.1.4.1.562.2.4.1.40.5.1 |
|
This entry controls the addition and deletion of
rtgTop components.
|
| rtgTopStatsTable |
.1.3.6.1.4.1.562.2.4.1.40.5.11 |
|
Rtg Top Statistics
This group contains operational data stored and maintained by this
component for recording statistics of Passport routing control
packets which have been sent or received by Topology.
|
| rtgTopNodeRowStatusTable |
.1.3.6.1.4.1.562.2.4.1.40.5.2.1 |
|
*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This entry controls the addition and deletion of
rtgTopNode components.
|
| rtgTopNodeOperTable |
.1.3.6.1.4.1.562.2.4.1.40.5.2.10 |
|
*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
Rtg Top Node/<neighborNodeName> Operational
This group contains operational data about each node in the
Passport network and its connectivity to its neighbours.
|
| rtgTopNodeLgRowStatusTable |
.1.3.6.1.4.1.562.2.4.1.40.5.2.2.1 |
|
*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This entry controls the addition and deletion of
rtgTopNodeLg components.
|
| rtgTopNodeLgOperTable |
.1.3.6.1.4.1.562.2.4.1.40.5.2.2.10 |
|
*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
Rtg Top Node/<neighborNodeName> LinkGroup/
<neighborNodeName> Operational
This group contains the operational data stored and maintained by
TrunkGroup component for each trunk group attached to a node in
the Passport network.
|
| rtgTopNodeLgLnnTable |
.1.3.6.1.4.1.562.2.4.1.40.5.2.2.235 |
|
*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This attribute is a list of integers which specify the logical network
numbers supported by the trunk group.
Each of these numbers corresponds with a particular instance of
network protocol supported on this switch. LNN 0 is present on all
trunks by default to allow Passport control traffic on the trunk.
|
| rtgTopNodeLgTrkObjRowStatusTable |
.1.3.6.1.4.1.562.2.4.1.40.5.2.2.2.1 |
|
*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This entry controls the addition and deletion of
rtgTopNodeLgTrkObj components.
|
| rtgTopNodeLgTrkObjOperTable |
.1.3.6.1.4.1.562.2.4.1.40.5.2.2.2.10 |
|
*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
Rtg Top Node/<neighborNodeName> LinkGroup/
<neighborNodeName> Trunk/<Trm Lk Id> Operational
This group contains the operational data stored and maintained by
TplPorTrunk component.
|
| rtgTopNodeLgTrkObjUnresTable |
.1.3.6.1.4.1.562.2.4.1.40.5.2.2.2.234 |
|
*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This attribute displays a table. In the first row there are setup
priorities. In the second row there are numerators of parts of
unreserved bandwidth corresponding to setup priority 0 (first
column) through 4 (fifth column). The denominator is 255.
|
| trmRowStatusTable |
.1.3.6.1.4.1.562.2.4.1.41.1 |
|
This entry controls the addition and deletion of
trm components.
|
| trmLkRowStatusTable |
.1.3.6.1.4.1.562.2.4.1.41.2.1 |
|
*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This entry controls the addition and deletion of
trmLk components.
|
| trmLkOperTable |
.1.3.6.1.4.1.562.2.4.1.41.2.10 |
|
*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
Trm Lk/<n> Operational
This group of attributes is used to list links. These links are all
registered with Transport Resource Manager. They have a status
which reflects the current view of the link.
|
| trmLkFwdStatsTable |
.1.3.6.1.4.1.562.2.4.1.41.2.11 |
|
*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This group of attributes is used to display egress statistics collected
by packet forwarding on this link. The statistics can be used to
monitor congestion conditions and packet discards on a link.
|
| trmLkDiscardCongestedTable |
.1.3.6.1.4.1.562.2.4.1.41.2.280 |
|
*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This attribute counts the packets that have been discarded by packet
forwarding due to congestion on this link and when the
forwardingPolicy attribute of Routing DpnAddressPlan is set to
loadshare or loadspread.
This attribute is a vector with three entries. Each entry corresponds
to a discard priority of the packet. The first entry represents the
discard count of packets with discard priority 1, the second entry
discard priority 2, and the third entry discard priority 3. Each entry
(counter) wraps around to zero when the maximum value is
reached.
|
| trmLgRowStatusTable |
.1.3.6.1.4.1.562.2.4.1.41.3.1 |
|
*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This entry controls the addition and deletion of
trmLg components.
|
| trmLgLkRowStatusTable |
.1.3.6.1.4.1.562.2.4.1.41.3.2.1 |
|
*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This entry controls the addition and deletion of
trmLgLk components.
|
| trmLgLkOperTable |
.1.3.6.1.4.1.562.2.4.1.41.3.2.10 |
|
*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
Trm Lk/<n> Operational
This group of attributes is used to list links. These links are all
registered with Transport Resource Manager. They have a status
which reflects the current view of the link.
|
| trmLgLkFwdStatsTable |
.1.3.6.1.4.1.562.2.4.1.41.3.2.11 |
|
*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This group of attributes is used to display egress statistics collected
by packet forwarding on this link. The statistics can be used to
monitor congestion conditions and packet discards on a link.
|
| trmLgLkDiscardCongestedTable |
.1.3.6.1.4.1.562.2.4.1.41.3.2.280 |
|
*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This attribute counts the packets that have been discarded by packet
forwarding due to congestion on this link and when the
forwardingPolicy attribute of Routing DpnAddressPlan is set to
loadshare or loadspread.
This attribute is a vector with three entries. Each entry corresponds
to a discard priority of the packet. The first entry represents the
discard count of packets with discard priority 1, the second entry
discard priority 2, and the third entry discard priority 3. Each entry
(counter) wraps around to zero when the maximum value is
reached.
|
| trmLgLNNRowStatusTable |
.1.3.6.1.4.1.562.2.4.1.41.3.3.1 |
|
*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This entry controls the addition and deletion of
trmLgLNN components.
|
| trmLgLNNOperTable |
.1.3.6.1.4.1.562.2.4.1.41.3.3.10 |
|
*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
Trm Lg/<neighborNodeName> LNN/<logical network number>
Operational
This group of attributes is the information associated with an
address plan.
|
| npiRowStatusTable |
.1.3.6.1.4.1.562.2.4.1.43.1 |
|
This entry controls the addition and deletion of
npi components.
|
| npiStatsTable |
.1.3.6.1.4.1.562.2.4.1.43.10 |
|
Npi/<x121,e164> Statistics
This group of attributes contains the statistics kept for a particular
numbering plan indicator. The only statistic present is the total
number of DNAs provisioned for the numbering plan.
|
| npiDnaRowStatusTable |
.1.3.6.1.4.1.562.2.4.1.43.2.1 |
|
*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This entry controls the addition and deletion of
npiDna components.
|
| npiDnaInfoTable |
.1.3.6.1.4.1.562.2.4.1.43.2.10 |
|
*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
Npi/<x121,e164> Dna/<BCD(1..15)> Information
This group of attributes contains the attributes for a DNA in the
numbering plan.
|
