Nortel-Magellan-Passport-CallServerMIB.mib object view, vendor Northern-Telecom-Ltd
Introduction
Most network devices and programs ship with so-called MIB files to describe the parameters and meanings (i.e.: friendly names) which are available for monitoring via SNMP.
ActiveXperts Network Monitor 2024 can import vendor-specific MIB files, so it can be used to monitor specific OID's (Object Identifiers).
This way, you can monitor your devices, computers, etc. by selecting your relevant OID's by name.
ActiveXperts Network Monitor 2024 can import MIB file Nortel-Magellan-Passport-CallServerMIB and use it to monitor vendor specific OID's.
Nortel-Magellan-Passport-CallServerMIB file content
Object view of Nortel-Magellan-Passport-CallServerMIB:
| Scalar Object |
| cRRowStatusEntry |
.1.3.6.1.4.1.562.2.4.1.42.1.1 |
|
A single entry in the table represents a single
cR component.
|
| cRNpiRowStatusEntry |
.1.3.6.1.4.1.562.2.4.1.42.2.1.1 |
|
A single entry in the table represents a single
cRNpi component.
|
| cRNpiStatsEntry |
.1.3.6.1.4.1.562.2.4.1.42.2.10.1 |
|
An entry in the cRNpiStatsTable.
|
| cRNpiDnaRowStatusEntry |
.1.3.6.1.4.1.562.2.4.1.42.2.2.1.1 |
|
A single entry in the table represents a single
cRNpiDna component.
|
| cRNpiDnaProvEntry |
.1.3.6.1.4.1.562.2.4.1.42.2.2.10.1 |
|
An entry in the cRNpiDnaProvTable.
|
| Tabular Object |
| cRIndex |
.1.3.6.1.4.1.562.2.4.1.42.1.1.10 |
|
This variable represents the index for the cR tables.
|
| cRRowStatus |
.1.3.6.1.4.1.562.2.4.1.42.1.1.1 |
|
This variable is used as the basis for SNMP naming of
cR components.
These components can be added and deleted.
|
| cRComponentName |
.1.3.6.1.4.1.562.2.4.1.42.1.1.2 |
|
This variable provides the component's string name for
use with the ASCII Console Interface
|
| cRStorageType |
.1.3.6.1.4.1.562.2.4.1.42.1.1.4 |
|
This variable represents the storage type value for the
cR tables.
|
| cRNpiIndex |
.1.3.6.1.4.1.562.2.4.1.42.2.1.1.10 |
|
This variable represents the index for the cRNpi tables.
|
| cRNpiRowStatus |
.1.3.6.1.4.1.562.2.4.1.42.2.1.1.1 |
|
This variable is used as the basis for SNMP naming of
cRNpi components.
These components can be added and deleted.
|
| cRNpiComponentName |
.1.3.6.1.4.1.562.2.4.1.42.2.1.1.2 |
|
This variable provides the component's string name for
use with the ASCII Console Interface
|
| cRNpiStorageType |
.1.3.6.1.4.1.562.2.4.1.42.2.1.1.4 |
|
This variable represents the storage type value for the
cRNpi tables.
|
| cRNpiTotalDnas |
.1.3.6.1.4.1.562.2.4.1.42.2.10.1.1 |
|
This attribute contains the total number of prefix-DNAs
provisioned.
|
| cRNpiCallsRouted |
.1.3.6.1.4.1.562.2.4.1.42.2.10.1.2 |
|
This attribute contains the total number of call setup packets routed.
When the counter reaches the maximum, it wraps back to zero.
|
| cRNpiCallsFailed |
.1.3.6.1.4.1.562.2.4.1.42.2.10.1.3 |
|
This attribute contains the total number of call setup packets that
failed to route. This could be caused by the MID or RID being
unreachable or by the DNA failing to translate to a MID or RID.
Check the prefix-DNA provisioning data and the DNAs associated
to the endpoints of the connection. When the counter reaches the
maximum, it wraps back to zero.
|
| cRNpiDnaIndex |
.1.3.6.1.4.1.562.2.4.1.42.2.2.1.1.10 |
|
This variable represents the index for the cRNpiDna tables.
|
| cRNpiDnaRowStatus |
.1.3.6.1.4.1.562.2.4.1.42.2.2.1.1.1 |
|
This variable is used as the basis for SNMP naming of
cRNpiDna components.
These components can be added and deleted.
|
| cRNpiDnaComponentName |
.1.3.6.1.4.1.562.2.4.1.42.2.2.1.1.2 |
|
This variable provides the component's string name for
use with the ASCII Console Interface
|
| cRNpiDnaStorageType |
.1.3.6.1.4.1.562.2.4.1.42.2.2.1.1.4 |
|
This variable represents the storage type value for the
cRNpiDna tables.
|
| cRNpiDnaRoutingId |
.1.3.6.1.4.1.562.2.4.1.42.2.2.10.1.1 |
|
This attribute identifies the routingId that the prefix-DNA maps to.
If the value is set to zero, then the routingId is not used. Note that at
least one and only one of the attributes in this group must be set to a
non-zero value.
|
| cRNpiDnaModuleId |
.1.3.6.1.4.1.562.2.4.1.42.2.2.10.1.2 |
|
This attribute contains the module identifier value that the DNA
maps to. If the value is set to zero, then the moduleId is not used.
Note that at least one and only one of the attributes in this group
must be set to a non-zero value.
|
| Table |
| cRRowStatusTable |
.1.3.6.1.4.1.562.2.4.1.42.1 |
|
This entry controls the addition and deletion of
cR components.
|
| cRNpiRowStatusTable |
.1.3.6.1.4.1.562.2.4.1.42.2.1 |
|
This entry controls the addition and deletion of
cRNpi components.
|
| cRNpiStatsTable |
.1.3.6.1.4.1.562.2.4.1.42.2.10 |
|
This group of attributes contains the statistics kept for a particular
numbering plan indicator.
|
| cRNpiDnaRowStatusTable |
.1.3.6.1.4.1.562.2.4.1.42.2.2.1 |
|
This entry controls the addition and deletion of
cRNpiDna components.
|
| cRNpiDnaProvTable |
.1.3.6.1.4.1.562.2.4.1.42.2.2.10 |
|
This group of attributes represents what the prefix-DNA maps to.
|
| Object Identifier |
| callServerMIB |
.1.3.6.1.4.1.562.2.4.2.41 |
| cR |
.1.3.6.1.4.1.562.2.4.1.42 |
| cRNpi |
.1.3.6.1.4.1.562.2.4.1.42.2 |
| cRNpiDna |
.1.3.6.1.4.1.562.2.4.1.42.2.2 |
| callServerGroup |
.1.3.6.1.4.1.562.2.4.2.41.1 |
| callServerGroupBC |
.1.3.6.1.4.1.562.2.4.2.41.1.3 |
| callServerGroupBC02 |
.1.3.6.1.4.1.562.2.4.2.41.1.3.3 |
| callServerGroupBC02A |
.1.3.6.1.4.1.562.2.4.2.41.1.3.3.2 |
| callServerCapabilities |
.1.3.6.1.4.1.562.2.4.2.41.3 |
| callServerCapabilitiesBC |
.1.3.6.1.4.1.562.2.4.2.41.3.3 |
| callServerCapabilitiesBC02 |
.1.3.6.1.4.1.562.2.4.2.41.3.3.3 |
| callServerCapabilitiesBC02A |
.1.3.6.1.4.1.562.2.4.2.41.3.3.3.2 |
