| rtgDpnRowStatusEntry |
.1.3.6.1.4.1.562.2.4.1.40.4.1.1 |
|
A single entry in the table represents a single
rtgDpn component.
|
| rtgDpnProvEntry |
.1.3.6.1.4.1.562.2.4.1.40.4.11.1 |
|
An entry in the rtgDpnProvTable.
|
| rtgDpnConStatsEntry |
.1.3.6.1.4.1.562.2.4.1.40.4.13.1 |
|
An entry in the rtgDpnConStatsTable.
|
| rtgDpnFwdStatsEntry |
.1.3.6.1.4.1.562.2.4.1.40.4.14.1 |
|
An entry in the rtgDpnFwdStatsTable.
|
| rtgDpnCallServerModuleRidsEntry |
.1.3.6.1.4.1.562.2.4.1.40.4.232.1 |
|
An entry in the rtgDpnCallServerModuleRidsTable.
|
| rtgDpnSubnetMidsEntry |
.1.3.6.1.4.1.562.2.4.1.40.4.233.1 |
|
An entry in the rtgDpnSubnetMidsTable.
|
| rtgDpnVarianceEntry |
.1.3.6.1.4.1.562.2.4.1.40.4.343.1 |
|
An entry in the rtgDpnVarianceTable.
|
| rtgDpnRidRowStatusEntry |
.1.3.6.1.4.1.562.2.4.1.40.4.2.1.1 |
|
A single entry in the table represents a single
rtgDpnRid component.
|
| rtgDpnRidOperEntry |
.1.3.6.1.4.1.562.2.4.1.40.4.2.10.1 |
|
An entry in the rtgDpnRidOperTable.
|
| rtgDpnRidDelayNextHopLinkGroupsEntry |
.1.3.6.1.4.1.562.2.4.1.40.4.2.226.1 |
|
An entry in the rtgDpnRidDelayNextHopLinkGroupsTable.
|
| rtgDpnRidTputNextHopLinkGroupsEntry |
.1.3.6.1.4.1.562.2.4.1.40.4.2.227.1 |
|
An entry in the rtgDpnRidTputNextHopLinkGroupsTable.
|
| rtgDpnRidDelayPathTrafficProportionsEntry |
.1.3.6.1.4.1.562.2.4.1.40.4.2.328.1 |
|
An entry in the rtgDpnRidDelayPathTrafficProportionsTable.
|
| rtgDpnRidTputPathTrafficProportionsEntry |
.1.3.6.1.4.1.562.2.4.1.40.4.2.329.1 |
|
An entry in the rtgDpnRidTputPathTrafficProportionsTable.
|
| rtgDpnRidDelayMetricEntry |
.1.3.6.1.4.1.562.2.4.1.40.4.2.339.1 |
|
An entry in the rtgDpnRidDelayMetricTable.
|
| rtgDpnRidTputMetricEntry |
.1.3.6.1.4.1.562.2.4.1.40.4.2.340.1 |
|
An entry in the rtgDpnRidTputMetricTable.
|
| rtgDpnRidMidRowStatusEntry |
.1.3.6.1.4.1.562.2.4.1.40.4.2.2.1.1 |
|
A single entry in the table represents a single
rtgDpnRidMid component.
|
| rtgDpnMidRowStatusEntry |
.1.3.6.1.4.1.562.2.4.1.40.4.3.1.1 |
|
A single entry in the table represents a single
rtgDpnMid component.
|
| rtgDpnMidOperEntry |
.1.3.6.1.4.1.562.2.4.1.40.4.3.10.1 |
|
An entry in the rtgDpnMidOperTable.
|
| rtgDpnMidDelayNextHopLinkGroupsEntry |
.1.3.6.1.4.1.562.2.4.1.40.4.3.228.1 |
|
An entry in the rtgDpnMidDelayNextHopLinkGroupsTable.
|
| rtgDpnMidTputNextHopLinkGroupsEntry |
.1.3.6.1.4.1.562.2.4.1.40.4.3.229.1 |
|
An entry in the rtgDpnMidTputNextHopLinkGroupsTable.
|
| rtgDpnMidDelayMetricEntry |
.1.3.6.1.4.1.562.2.4.1.40.4.3.330.1 |
|
An entry in the rtgDpnMidDelayMetricTable.
|
| rtgDpnMidTputMetricEntry |
.1.3.6.1.4.1.562.2.4.1.40.4.3.331.1 |
|
An entry in the rtgDpnMidTputMetricTable.
|
| rtgDpnMidDelayPathTrafficProportionsEntry |
.1.3.6.1.4.1.562.2.4.1.40.4.3.332.1 |
|
An entry in the rtgDpnMidDelayPathTrafficProportionsTable.
|
| rtgDpnMidTputPathTrafficProportionsEntry |
.1.3.6.1.4.1.562.2.4.1.40.4.3.333.1 |
|
An entry in the rtgDpnMidTputPathTrafficProportionsTable.
|
| rtgDpnCsRowStatusEntry |
.1.3.6.1.4.1.562.2.4.1.40.4.4.1.1 |
|
A single entry in the table represents a single
rtgDpnCs component.
|
| rtgDpnCsDelayNextHopLinkGroupsEntry |
.1.3.6.1.4.1.562.2.4.1.40.4.4.230.1 |
|
An entry in the rtgDpnCsDelayNextHopLinkGroupsTable.
|
| rtgDpnCsTputNextHopLinkGroupsEntry |
.1.3.6.1.4.1.562.2.4.1.40.4.4.231.1 |
|
An entry in the rtgDpnCsTputNextHopLinkGroupsTable.
|
| rtgDpnCsDelayMetricEntry |
.1.3.6.1.4.1.562.2.4.1.40.4.4.334.1 |
|
An entry in the rtgDpnCsDelayMetricTable.
|
| rtgDpnCsTputMetricEntry |
.1.3.6.1.4.1.562.2.4.1.40.4.4.335.1 |
|
An entry in the rtgDpnCsTputMetricTable.
|
| rtgDpnCsDelayPathTrafficProportionsEntry |
.1.3.6.1.4.1.562.2.4.1.40.4.4.336.1 |
|
An entry in the rtgDpnCsDelayPathTrafficProportionsTable.
|
| rtgDpnCsTputPathTrafficProportionsEntry |
.1.3.6.1.4.1.562.2.4.1.40.4.4.337.1 |
|
An entry in the rtgDpnCsTputPathTrafficProportionsTable.
|
| rtgDpnLgRowStatusEntry |
.1.3.6.1.4.1.562.2.4.1.40.4.5.1.1 |
|
A single entry in the table represents a single
rtgDpnLg component.
|
| rtgDpnLgOperEntry |
.1.3.6.1.4.1.562.2.4.1.40.4.5.3.1 |
|
An entry in the rtgDpnLgOperTable.
|
| rtgDpnLpStatsRowStatusEntry |
.1.3.6.1.4.1.562.2.4.1.40.4.6.1.1 |
|
A single entry in the table represents a single
rtgDpnLpStats component.
|
| rtgDpnLpStatsFwdStatsEntry |
.1.3.6.1.4.1.562.2.4.1.40.4.6.10.1 |
|
An entry in the rtgDpnLpStatsFwdStatsTable.
|
| rtgDpnRidFilterRowStatusEntry |
.1.3.6.1.4.1.562.2.4.1.40.4.7.1.1 |
|
A single entry in the table represents a single
rtgDpnRidFilter component.
|
| rtgDpnRidFilterImportRidListEntry |
.1.3.6.1.4.1.562.2.4.1.40.4.7.303.1 |
|
An entry in the rtgDpnRidFilterImportRidListTable.
|
| rtgDpnRidFilterExportRidListEntry |
.1.3.6.1.4.1.562.2.4.1.40.4.7.304.1 |
|
An entry in the rtgDpnRidFilterExportRidListTable.
|
| rtgDpnIndex |
.1.3.6.1.4.1.562.2.4.1.40.4.1.1.10 |
|
This variable represents the index for the rtgDpn tables.
|
| rtgDpnRowStatus |
.1.3.6.1.4.1.562.2.4.1.40.4.1.1.1 |
|
This variable is used as the basis for SNMP naming of
rtgDpn components.
These components cannot be added nor deleted.
|
| rtgDpnComponentName |
.1.3.6.1.4.1.562.2.4.1.40.4.1.1.2 |
|
This variable provides the component's string name for
use with the ASCII Console Interface
|
| rtgDpnStorageType |
.1.3.6.1.4.1.562.2.4.1.40.4.1.1.4 |
|
This variable represents the storage type value for the
rtgDpn tables.
|
| rtgDpnLogicalNetworkNumber |
.1.3.6.1.4.1.562.2.4.1.40.4.11.1.1 |
|
This attribute specifies the Logical Network Number for the
DpnAddressPlan. Since only one instance of this component can
exist, this value is always set to one. It is provided here to be
consistent with other address plans and so that it can be queried.
|
| rtgDpnRoutingId |
.1.3.6.1.4.1.562.2.4.1.40.4.11.1.2 |
|
This attribute specifies the Routing Identifier (RID) associated with
the Passport node.
The RID is used to identify a group of one or more interconnected
Passport nodes (called a subnet) supporting the transport of DPN
traffic. Its value must be the same as that of the other Passport nodes
in this subnet and different from that of all RMs and other Passport
subnets in the network.
The routingId must be set when a DpnAddressPlan component is
configured on an Passport node.
Changing the value of the routingId will cause the node to restart.
|
| rtgDpnModuleId |
.1.3.6.1.4.1.562.2.4.1.40.4.11.1.3 |
|
This attribute specifies the Module Identifier (MID) associated with
the Passport node.
The MID is used to identify an Passport node supporting the
transport of DPN traffic. Its value must be different from that of all
MIDs assigned to Passport nodes in this RID subnet (interconnected
Passport nodes sharing a RID) and AMs in clusters supported by
this subnet. If routing zones are used, it must also be unique from
all other MIDs in this zone.
The moduleId must be set when a DpnAddressPlan component is
configured on an Passport node.
Changing the value of the moduleId will cause the node to restart.
|
| rtgDpnDelayMetricCutOff |
.1.3.6.1.4.1.562.2.4.1.40.4.11.1.4 |
|
This attribute specifies the delay metric value beyond which a
destination RID should be considered unreachable. That is, if a
delay metric to a RID is equal to or greater than this value then the
RID is considered to be unreachable in the delay class of service.
Lowering this value has the effect of speeding up the detection of
the loss of reachability to a RID. It also reduces the amount of
Routing Table Update (RTU) traffic generated in this scenario. Care
must be taken to ensure that the value chosen is big enough for the
longest delay path in the network.
This attribute is optional; a default of 128 is used when it is not set.
It is recommended that all nodes in the network be provisioned with
the same cut off value.
|
| rtgDpnThroughputMetricCutOff |
.1.3.6.1.4.1.562.2.4.1.40.4.11.1.5 |
|
This attribute specifies the throughput metric value beyond which a
destination RID should be considered unreachable. That is, if a
throughput metric to a RID is equal to or greater than this value
then the RID will be considered to be unreachable in the throughput
class of service.
Lowering this value has the effect of speeding up the detection of
the loss of reachability to a RID. It also reduces the amount of
Routing Table Update (RTU) traffic generated in this scenario.Care
must be taken to ensure that the value chosen is big enough for the
longest throughput path in the network.
This attribute is optional; a default of 245 is used when it is not set.
It is recommended that all nodes in the network be provisioned with
the same cut off value.
|
| rtgDpnForwardingPolicy |
.1.3.6.1.4.1.562.2.4.1.40.4.11.1.6 |
|
This attribute specifies the forwarding policy used by packet
forwarding to handle DPN traffic on a Passport module.
When this attribute is set to loadshare, DPN traffic is shared among
preferred links in a link group in proportion to the available
bandwidth on each link; the traffic is not forwarded in an order-
preserved manner and needs resequencing at the destination, but the
available bandwidth in a link group is utilized efficiently.
When this attribute is set to loadspread, DPN traffic is forwarded in
an order-preserved manner along a randomly selected route; the
traffic sticks to a particular link in a link group, and will not spill
over to other links in the link group unless there is congestion on
the selected link.
When this attribute is set to loadspreadFast, DPN traffic is
forwarded in an order-preserved manner along a randomly selected
route; the traffic sticks to a particular link in a link group, and will
not spill over to other links in the link group. Choosing this value
may improve throughput but traffic may be discarded in the
presence of congestion.
It is recommended that all nodes in the network be provisioned with
the same forwarding policy.
|
| rtgDpnDelayMetricRangeBoundary |
.1.3.6.1.4.1.562.2.4.1.40.4.11.1.7 |
|
This attribute specifies the total path delay metric below which the
variance value specified for delay COS and a low metric range is
used, and at or above which the variance value specified for delay
COS and a high metric range is used.
This attribute defaults to 0, so that the variance value specified for
delay COS and a high metric range is used for all delay paths. If this
attribute is set to 2147483647, the variance value specified for
delay COS and a low metric range is used for all delay paths.
|
| rtgDpnTputMetricRangeBoundary |
.1.3.6.1.4.1.562.2.4.1.40.4.11.1.8 |
|
This attribute specifies the total path throughput metric below which
the variance value specified for throughput COS and a low metric
range is used, and at or above which the variance value specified for
throughput COS and a high metric range is used.
This attribute defaults to 0, so that the variance value specified for
throughput COS and a high metric range is used for all delay paths.
If this attribute is set to 2147483647, the variance value specified
for throughput COS and a low metric range is used for all
throughput paths.
|
| rtgDpnControlPktTx |
.1.3.6.1.4.1.562.2.4.1.40.4.13.1.1 |
|
This attribute counts the total number of internal Passport DPN
control packets, originating from this node, sent to other Passport
nodes in the RID subnet. The packets contain DPN routing
information required by the DpnAddressPlan component to support
the transport of DPN traffic. The Packets received from a neighbor
node and forwarded to other neighbors are not counted. The counter
wraps around to zero when the maximum value is reached.
|
| rtgDpnControlPktRx |
.1.3.6.1.4.1.562.2.4.1.40.4.13.1.2 |
|
This attribute counts the total number of internal Passport DPN
control packets received from other Passport nodes in the RID
subnet. The packets contain DPN routing information required by
the DpnAddressPlan component to support the transport of DPN
traffic. The counter wraps around to zero when the maximum value
is reached.
|
| rtgDpnControlBytesTx |
.1.3.6.1.4.1.562.2.4.1.40.4.13.1.3 |
|
This attribute counts the total number of internal Passport DPN
control packet bytes, originating from the node, sent to other
Passport nodes in the RID subnet. The packets contain DPN routing
information required by the DpnAddressPlan component to support
the transport of DPN traffic. Packet bytes received from a neighbor
node and forwarded to other neighbors are not counted. The counter
wraps around to zero when the maximum value is reached.
|
| rtgDpnControlBytesRx |
.1.3.6.1.4.1.562.2.4.1.40.4.13.1.4 |
|
This attribute counts the total number of internal Passport DPN
control packet bytes received from other Passport nodes in the RID
subnet. The packets contain DPN routing information required by
the DpnAddressPlan component to support the transport of DPN
traffic. The counter wraps around to zero when the maximum value
is reached.
|
| rtgDpnOutOfSequencePkt |
.1.3.6.1.4.1.562.2.4.1.40.4.13.1.5 |
|
This attribute counts the total number of internal Passport DPN
control packets received and rejected. These packets contained old
sequence numbers. The packets contain DPN routing information
required by the DpnAddressPlan component to support the
transport of DPN traffic. The counter wraps around to zero when the
maximum value is reached.
|
| rtgDpnTotalPackets |
.1.3.6.1.4.1.562.2.4.1.40.4.14.1.1 |
|
This attribute counts the total number of delay and throughput
packets handled by DPN packet forwarding on this module. Note
that DPRS packets leaving the network at this module are not
counted. The counter wraps to zero when the maximum value is
exceeded.
|
| rtgDpnThroughputPackets |
.1.3.6.1.4.1.562.2.4.1.40.4.14.1.2 |
|
This attribute counts the throughput packets handled by DPN packet
forwarding on this module. Note that DPRS packets leaving the
network at this module are not counted. The counter wraps to zero
when the maximum value is exceeded.
|
| rtgDpnDelayPackets |
.1.3.6.1.4.1.562.2.4.1.40.4.14.1.3 |
|
This attribute counts the delay packets handled by DPN packet
forwarding on this module. Note that DPRS packets leaving the
network at this module are not counted. The counter wraps to zero
when the maximum value is exceeded.
|
| rtgDpnNormalReliabilityPackets |
.1.3.6.1.4.1.562.2.4.1.40.4.14.1.4 |
|
This attribute counts the normal reliability packets handled by DPN
packet forwarding on this module when the forwardingPolicy
attribute of Routing DpnAddressPlan is set to loadshare or
loadspread. Note that DPRS packets leaving the network at this
module are not counted. The counter wraps to zero when the
maximum value is exceeded.
|
| rtgDpnHighReliabilityPackets |
.1.3.6.1.4.1.562.2.4.1.40.4.14.1.5 |
|
This attribute counts the high reliability packets handled by DPN
packet forwarding on this module when the forwardingPolicy
attribute of Routing DpnAddressPlan is set to loadshare or
loadspread. Note that DPRS packets leaving the network at this
module are not counted. The counter wraps to zero when the
maximum value is exceeded.
|
| rtgDpnDiscardNoRoute |
.1.3.6.1.4.1.562.2.4.1.40.4.14.1.6 |
|
This attribute counts the packets discarded when DPN packet
forwarding has failed to find a route to forward the packets on this
module. Note that DPRS packets leaving the network at this module
are not counted. The counter wraps to zero when the maximum
value is exceeded.
|
| rtgDpnInterruptingPackets |
.1.3.6.1.4.1.562.2.4.1.40.4.14.1.7 |
|
This attribute counts the total number of multimedia packets
handled by DPN packet forwarding on this module. Note that DPRS
packets leaving the network at this module are not counted. The
counter wraps to zero when the maximum value is exceeded.
|
| rtgDpnDiscardLpCongested |
.1.3.6.1.4.1.562.2.4.1.40.4.14.1.8 |
|
This attribute counts the packets that have been discarded by
packet forwarding due to LP congestion on this module. A packet
encounters LP congestion when there is insufficient shared
memory. Note that DPRS packets leaving the network at this
module are not counted. The counter wraps to zero when the
maximum value is exceeded.
|
| rtgDpnCallServerModuleRidsValue |
.1.3.6.1.4.1.562.2.4.1.40.4.232.1.1 |
|
This variable represents both the value and the index for the
rtgDpnCallServerModuleRidsTable.
|
| rtgDpnSubnetMidsValue |
.1.3.6.1.4.1.562.2.4.1.40.4.233.1.1 |
|
This variable represents both the value and the index for the
rtgDpnSubnetMidsTable.
|
| rtgDpnVarianceCosIndex |
.1.3.6.1.4.1.562.2.4.1.40.4.343.1.1 |
|
This variable represents the next to last index for the
rtgDpnVarianceTable.
|
| rtgDpnVarianceMetricRangeIndex |
.1.3.6.1.4.1.562.2.4.1.40.4.343.1.2 |
|
This variable represents the final index for the
rtgDpnVarianceTable.
|
| rtgDpnVarianceValue |
.1.3.6.1.4.1.562.2.4.1.40.4.343.1.3 |
|
This variable represents an individual value for the
rtgDpnVarianceTable.
|
| rtgDpnRidIndex |
.1.3.6.1.4.1.562.2.4.1.40.4.2.1.1.10 |
|
This variable represents the index for the rtgDpnRid tables.
|
| rtgDpnRidRowStatus |
.1.3.6.1.4.1.562.2.4.1.40.4.2.1.1.1 |
|
This variable is used as the basis for SNMP naming of
rtgDpnRid components.
These components cannot be added nor deleted.
|
| rtgDpnRidComponentName |
.1.3.6.1.4.1.562.2.4.1.40.4.2.1.1.2 |
|
This variable provides the component's string name for
use with the ASCII Console Interface
|
| rtgDpnRidStorageType |
.1.3.6.1.4.1.562.2.4.1.40.4.2.1.1.4 |
|
This variable represents the storage type value for the
rtgDpnRid tables.
|
| rtgDpnRidDpnDelayMetric |
.1.3.6.1.4.1.562.2.4.1.40.4.2.10.1.1 |
|
This attribute indicates the minimum DPN delay metric to the
destination RID. The delay metric associated with a path is
computed by the routing system by translating the smallest
delayMetric calculated for the destination. A path with a lower
metric value is preferable to one with a higher value as it is
associated with lower delay facilities. The metric displayed is that
of the best path to the destination. This metric is advertised to
neighbor RMs and Passports in a different RID subnet.
A metric value of 255 means the RID is unreachable in the delay
class of service. A value of 0 indicates that no cost is associated
with the path to the destination. This would be the case for the local
node's RID. A metric value of 252 indicates that the destination
RID is that of a Network Module (NM).
|
| rtgDpnRidDpnTputMetric |
.1.3.6.1.4.1.562.2.4.1.40.4.2.10.1.2 |
|
This attribute indicates the minimum DPN throughput metric to the
destination RID. The throughput metric associated with a path is
computed by the routing system by translating the smallest
tputMetric calculated for the destination. A path with a lower metric
value is preferable to one with a higher value as it is associated with
higher bandwidth facilities. The metric displayed is that of the best
path to the destination. This metric is advertised to neighbor RMs
and Passports in a different RID subnet.
A metric value of 255 means the RID is unreachable in the
throughput class of service. A value of 0 indicates that no cost is
associated with the path to the destination. This would be the case
for the local node's RID.
|
| rtgDpnRidDelayNextHopLinkGroupsIndex |
.1.3.6.1.4.1.562.2.4.1.40.4.2.226.1.1 |
|
This variable represents the index for the rtgDpnRidDelayNextHopLinkGroupsTable.
|
| rtgDpnRidDelayNextHopLinkGroupsValue |
.1.3.6.1.4.1.562.2.4.1.40.4.2.226.1.2 |
|
This variable represents an individual value for the
rtgDpnRidDelayNextHopLinkGroupsTable.
|
| rtgDpnRidTputNextHopLinkGroupsIndex |
.1.3.6.1.4.1.562.2.4.1.40.4.2.227.1.1 |
|
This variable represents the index for the rtgDpnRidTputNextHopLinkGroupsTable.
|
| rtgDpnRidTputNextHopLinkGroupsValue |
.1.3.6.1.4.1.562.2.4.1.40.4.2.227.1.2 |
|
This variable represents an individual value for the
rtgDpnRidTputNextHopLinkGroupsTable.
|
| rtgDpnRidDelayPathTrafficProportionsIndex |
.1.3.6.1.4.1.562.2.4.1.40.4.2.328.1.1 |
|
This variable represents the index for the rtgDpnRidDelayPathTrafficProportionsTable.
|
| rtgDpnRidDelayPathTrafficProportionsValue |
.1.3.6.1.4.1.562.2.4.1.40.4.2.328.1.2 |
|
This variable represents an individual value for the
rtgDpnRidDelayPathTrafficProportionsTable.
|
| rtgDpnRidTputPathTrafficProportionsIndex |
.1.3.6.1.4.1.562.2.4.1.40.4.2.329.1.1 |
|
This variable represents the index for the rtgDpnRidTputPathTrafficProportionsTable.
|
| rtgDpnRidTputPathTrafficProportionsValue |
.1.3.6.1.4.1.562.2.4.1.40.4.2.329.1.2 |
|
This variable represents an individual value for the
rtgDpnRidTputPathTrafficProportionsTable.
|
| rtgDpnRidDelayMetricIndex |
.1.3.6.1.4.1.562.2.4.1.40.4.2.339.1.1 |
|
This variable represents the index for the rtgDpnRidDelayMetricTable.
|
| rtgDpnRidDelayMetricValue |
.1.3.6.1.4.1.562.2.4.1.40.4.2.339.1.2 |
|
This variable represents an individual value for the
rtgDpnRidDelayMetricTable.
|
| rtgDpnRidTputMetricIndex |
.1.3.6.1.4.1.562.2.4.1.40.4.2.340.1.1 |
|
This variable represents the index for the rtgDpnRidTputMetricTable.
|
| rtgDpnRidTputMetricValue |
.1.3.6.1.4.1.562.2.4.1.40.4.2.340.1.2 |
|
This variable represents an individual value for the
rtgDpnRidTputMetricTable.
|
| rtgDpnRidMidIndex |
.1.3.6.1.4.1.562.2.4.1.40.4.2.2.1.1.10 |
|
This variable represents the index for the rtgDpnRidMid tables.
|
| rtgDpnRidMidRowStatus |
.1.3.6.1.4.1.562.2.4.1.40.4.2.2.1.1.1 |
|
This variable is used as the basis for SNMP naming of
rtgDpnRidMid components.
These components cannot be added nor deleted.
|
| rtgDpnRidMidComponentName |
.1.3.6.1.4.1.562.2.4.1.40.4.2.2.1.1.2 |
|
This variable provides the component's string name for
use with the ASCII Console Interface
|
| rtgDpnRidMidStorageType |
.1.3.6.1.4.1.562.2.4.1.40.4.2.2.1.1.4 |
|
This variable represents the storage type value for the
rtgDpnRidMid tables.
|
| rtgDpnMidIndex |
.1.3.6.1.4.1.562.2.4.1.40.4.3.1.1.10 |
|
This variable represents the index for the rtgDpnMid tables.
|
| rtgDpnMidRowStatus |
.1.3.6.1.4.1.562.2.4.1.40.4.3.1.1.1 |
|
This variable is used as the basis for SNMP naming of
rtgDpnMid components.
These components cannot be added nor deleted.
|
| rtgDpnMidComponentName |
.1.3.6.1.4.1.562.2.4.1.40.4.3.1.1.2 |
|
This variable provides the component's string name for
use with the ASCII Console Interface
|
| rtgDpnMidStorageType |
.1.3.6.1.4.1.562.2.4.1.40.4.3.1.1.4 |
|
This variable represents the storage type value for the
rtgDpnMid tables.
|
| rtgDpnMidSubstituteRid |
.1.3.6.1.4.1.562.2.4.1.40.4.3.10.1.3 |
|
This attribute indicates the substitute RID in use for the MID. This
RID will be substituted for the RID in DPN packets destined to the
local node's RID and the MID in question when the MID is
unreachable (when, for example, all links to an AM from the
Passport subnet are down). It will also be used in the case where the
path through the substitute RID is better than that available through
the subnet's connection to the cluster containing the AM MID.
Substitute RIDs are learned from AM clusters that are supported by
two RIDs (the Passport subnet's RID and another one). The
operator can check this value to determine if a possible back up
route to an AM exists. When there are no delayNextHopLinkGroups
or tputNextHopLinkGroups shown to reach the MID, the substitute
RID will be used.
A value of 128 indicates that no substitute RID is known.
|
| rtgDpnMidDelayNextHopLinkGroupsIndex |
.1.3.6.1.4.1.562.2.4.1.40.4.3.228.1.1 |
|
This variable represents the index for the rtgDpnMidDelayNextHopLinkGroupsTable.
|
| rtgDpnMidDelayNextHopLinkGroupsValue |
.1.3.6.1.4.1.562.2.4.1.40.4.3.228.1.2 |
|
This variable represents an individual value for the
rtgDpnMidDelayNextHopLinkGroupsTable.
|
| rtgDpnMidTputNextHopLinkGroupsIndex |
.1.3.6.1.4.1.562.2.4.1.40.4.3.229.1.1 |
|
This variable represents the index for the rtgDpnMidTputNextHopLinkGroupsTable.
|
| rtgDpnMidTputNextHopLinkGroupsValue |
.1.3.6.1.4.1.562.2.4.1.40.4.3.229.1.2 |
|
This variable represents an individual value for the
rtgDpnMidTputNextHopLinkGroupsTable.
|
| rtgDpnMidDelayMetricIndex |
.1.3.6.1.4.1.562.2.4.1.40.4.3.330.1.1 |
|
This variable represents the index for the rtgDpnMidDelayMetricTable.
|
| rtgDpnMidDelayMetricValue |
.1.3.6.1.4.1.562.2.4.1.40.4.3.330.1.2 |
|
This variable represents an individual value for the
rtgDpnMidDelayMetricTable.
|
| rtgDpnMidTputMetricIndex |
.1.3.6.1.4.1.562.2.4.1.40.4.3.331.1.1 |
|
This variable represents the index for the rtgDpnMidTputMetricTable.
|
| rtgDpnMidTputMetricValue |
.1.3.6.1.4.1.562.2.4.1.40.4.3.331.1.2 |
|
This variable represents an individual value for the
rtgDpnMidTputMetricTable.
|
| rtgDpnMidDelayPathTrafficProportionsIndex |
.1.3.6.1.4.1.562.2.4.1.40.4.3.332.1.1 |
|
This variable represents the index for the rtgDpnMidDelayPathTrafficProportionsTable.
|
| rtgDpnMidDelayPathTrafficProportionsValue |
.1.3.6.1.4.1.562.2.4.1.40.4.3.332.1.2 |
|
This variable represents an individual value for the
rtgDpnMidDelayPathTrafficProportionsTable.
|
| rtgDpnMidTputPathTrafficProportionsIndex |
.1.3.6.1.4.1.562.2.4.1.40.4.3.333.1.1 |
|
This variable represents the index for the rtgDpnMidTputPathTrafficProportionsTable.
|
| rtgDpnMidTputPathTrafficProportionsValue |
.1.3.6.1.4.1.562.2.4.1.40.4.3.333.1.2 |
|
This variable represents an individual value for the
rtgDpnMidTputPathTrafficProportionsTable.
|
| rtgDpnCsIndex |
.1.3.6.1.4.1.562.2.4.1.40.4.4.1.1.10 |
|
This variable represents the index for the rtgDpnCs tables.
|
| rtgDpnCsRowStatus |
.1.3.6.1.4.1.562.2.4.1.40.4.4.1.1.1 |
|
This variable is used as the basis for SNMP naming of
rtgDpnCs components.
These components cannot be added nor deleted.
|
| rtgDpnCsComponentName |
.1.3.6.1.4.1.562.2.4.1.40.4.4.1.1.2 |
|
This variable provides the component's string name for
use with the ASCII Console Interface
|
| rtgDpnCsStorageType |
.1.3.6.1.4.1.562.2.4.1.40.4.4.1.1.4 |
|
This variable represents the storage type value for the
rtgDpnCs tables.
|
| rtgDpnCsDelayNextHopLinkGroupsIndex |
.1.3.6.1.4.1.562.2.4.1.40.4.4.230.1.1 |
|
This variable represents the index for the rtgDpnCsDelayNextHopLinkGroupsTable.
|
| rtgDpnCsDelayNextHopLinkGroupsValue |
.1.3.6.1.4.1.562.2.4.1.40.4.4.230.1.2 |
|
This variable represents an individual value for the
rtgDpnCsDelayNextHopLinkGroupsTable.
|
| rtgDpnCsTputNextHopLinkGroupsIndex |
.1.3.6.1.4.1.562.2.4.1.40.4.4.231.1.1 |
|
This variable represents the index for the rtgDpnCsTputNextHopLinkGroupsTable.
|
| rtgDpnCsTputNextHopLinkGroupsValue |
.1.3.6.1.4.1.562.2.4.1.40.4.4.231.1.2 |
|
This variable represents an individual value for the
rtgDpnCsTputNextHopLinkGroupsTable.
|
| rtgDpnCsDelayMetricIndex |
.1.3.6.1.4.1.562.2.4.1.40.4.4.334.1.1 |
|
This variable represents the index for the rtgDpnCsDelayMetricTable.
|
| rtgDpnCsDelayMetricValue |
.1.3.6.1.4.1.562.2.4.1.40.4.4.334.1.2 |
|
This variable represents an individual value for the
rtgDpnCsDelayMetricTable.
|
| rtgDpnCsTputMetricIndex |
.1.3.6.1.4.1.562.2.4.1.40.4.4.335.1.1 |
|
This variable represents the index for the rtgDpnCsTputMetricTable.
|
| rtgDpnCsTputMetricValue |
.1.3.6.1.4.1.562.2.4.1.40.4.4.335.1.2 |
|
This variable represents an individual value for the
rtgDpnCsTputMetricTable.
|
| rtgDpnCsDelayPathTrafficProportionsIndex |
.1.3.6.1.4.1.562.2.4.1.40.4.4.336.1.1 |
|
This variable represents the index for the rtgDpnCsDelayPathTrafficProportionsTable.
|
| rtgDpnCsDelayPathTrafficProportionsValue |
.1.3.6.1.4.1.562.2.4.1.40.4.4.336.1.2 |
|
This variable represents an individual value for the
rtgDpnCsDelayPathTrafficProportionsTable.
|
| rtgDpnCsTputPathTrafficProportionsIndex |
.1.3.6.1.4.1.562.2.4.1.40.4.4.337.1.1 |
|
This variable represents the index for the rtgDpnCsTputPathTrafficProportionsTable.
|
| rtgDpnCsTputPathTrafficProportionsValue |
.1.3.6.1.4.1.562.2.4.1.40.4.4.337.1.2 |
|
This variable represents an individual value for the
rtgDpnCsTputPathTrafficProportionsTable.
|
| rtgDpnLgIndex |
.1.3.6.1.4.1.562.2.4.1.40.4.5.1.1.10 |
|
This variable represents the index for the rtgDpnLg tables.
|
| rtgDpnLgRowStatus |
.1.3.6.1.4.1.562.2.4.1.40.4.5.1.1.1 |
|
This variable is used as the basis for SNMP naming of
rtgDpnLg components.
These components cannot be added nor deleted.
|
| rtgDpnLgComponentName |
.1.3.6.1.4.1.562.2.4.1.40.4.5.1.1.2 |
|
This variable provides the component's string name for
use with the ASCII Console Interface
|
| rtgDpnLgStorageType |
.1.3.6.1.4.1.562.2.4.1.40.4.5.1.1.4 |
|
This variable represents the storage type value for the
rtgDpnLg tables.
|
| rtgDpnLgFarEndType |
.1.3.6.1.4.1.562.2.4.1.40.4.5.3.1.1 |
|
This attribute indicates the type of the far end module (EM, AM or
RM).
|
| rtgDpnLgFarEndRid |
.1.3.6.1.4.1.562.2.4.1.40.4.5.3.1.2 |
|
This attribute indicates the far end neighbor RID. If the neighbor is
an AM then the RID is that of the Passport node.
|
| rtgDpnLgFarEndMid |
.1.3.6.1.4.1.562.2.4.1.40.4.5.3.1.3 |
|
This attribute indicates the far end neighbor MID.
|
| rtgDpnLgDelayMetric |
.1.3.6.1.4.1.562.2.4.1.40.4.5.3.1.4 |
|
This attribute indicates the delay metric calculated for the link
group.
If the type of the far end switch is AM, the delay metric is
calculated for MID routing, ranging from 1 to 2147483647.
If the type of the far end switch is EM or RM, the delay metric,
ranging from 1 to 255, is based on the measured round trip delay of
the delay preferred links in the group. A link group with a low
metric value is preferable to one with a higher value as it is
associated with lower delay facilities.
|
| rtgDpnLgTputMetric |
.1.3.6.1.4.1.562.2.4.1.40.4.5.3.1.5 |
|
This attribute indicates the throughput metric calculated for the link
group.
If the type of the far end switch is AM, the throughput metric is
calculated for MID routing, ranging from 1 to 2147483647.
If the type of the far end switch is EM or RM, the throughput
metric, ranging from 1 to 255, is based on the sum of the bandwidth
available for all links in the group. A link group with a low metric
value is preferable to one with a higher value as it is associated with
higher bandwidth facilities.
|
| rtgDpnLpStatsIndex |
.1.3.6.1.4.1.562.2.4.1.40.4.6.1.1.10 |
|
This variable represents the index for the rtgDpnLpStats tables.
|
| rtgDpnLpStatsRowStatus |
.1.3.6.1.4.1.562.2.4.1.40.4.6.1.1.1 |
|
This variable is used as the basis for SNMP naming of
rtgDpnLpStats components.
These components cannot be added nor deleted.
|
| rtgDpnLpStatsComponentName |
.1.3.6.1.4.1.562.2.4.1.40.4.6.1.1.2 |
|
This variable provides the component's string name for
use with the ASCII Console Interface
|
| rtgDpnLpStatsStorageType |
.1.3.6.1.4.1.562.2.4.1.40.4.6.1.1.4 |
|
This variable represents the storage type value for the
rtgDpnLpStats tables.
|
| rtgDpnLpStatsTotalPackets |
.1.3.6.1.4.1.562.2.4.1.40.4.6.10.1.1 |
|
This attribute counts the total number of delay and throughput
packets handled by DPN packet forwarding on this LP. Note that
DPRS packets leaving the network at this module are not counted.
The counter wraps to zero when the maximum value is exceeded.
|
| rtgDpnLpStatsThroughputPackets |
.1.3.6.1.4.1.562.2.4.1.40.4.6.10.1.2 |
|
This attribute counts the throughput packets handled by DPN packet
forwarding on this LP. Note that DPRS packets leaving the network
at this module are not counted. The counter wraps to zero when the
maximum value is exceeded.
|
| rtgDpnLpStatsDelayPackets |
.1.3.6.1.4.1.562.2.4.1.40.4.6.10.1.3 |
|
This attribute counts the delay packets handled by DPN packet
forwarding on this LP. Note that DPRS packets leaving the network
at this module are not counted. The counter wraps to zero when the
maximum value is exceeded.
|
| rtgDpnLpStatsNormalReliabilityPackets |
.1.3.6.1.4.1.562.2.4.1.40.4.6.10.1.4 |
|
This attribute counts the normal reliability packets handled by DPN
packet forwarding on this LP when the forwardingPolicy attribute
of Routing DpnAddressPlan is set to loadshare or loadspread. Note
that DPRS packets leaving the network at this module are not
counted. The counter wraps to zero when the maximum value is
exceeded.
|
| rtgDpnLpStatsHighReliabilityPackets |
.1.3.6.1.4.1.562.2.4.1.40.4.6.10.1.5 |
|
This attribute counts the high reliability packets handled by DPN
packet forwarding on this LP when the forwardingPolicy attribute
of Routing DpnAddressPlan is set to loadshare or loadspread. Note
that DPRS packets leaving the network at this module are not
counted. The counter wraps to zero when the maximum value is
exceeded.
|
| rtgDpnLpStatsDiscardNoRoute |
.1.3.6.1.4.1.562.2.4.1.40.4.6.10.1.6 |
|
This attribute counts the packets discarded when DPN packet
forwarding has failed to find a route to forward the packets on this
LP. Note that DPRS packets leaving the network at this module are
not counted. The counter wraps to zero when the maximum value is
exceeded.
|
| rtgDpnLpStatsInterruptingPackets |
.1.3.6.1.4.1.562.2.4.1.40.4.6.10.1.7 |
|
This attribute counts the total number of multimedia packets
handled by DPN packet forwarding on this LP. Note that DPRS
packets leaving the network at this module are not counted. The
counter wraps to zero when the maximum value is exceeded.
|
| rtgDpnLpStatsDiscardLpCongested |
.1.3.6.1.4.1.562.2.4.1.40.4.6.10.1.8 |
|
This attribute counts the packets that have been discarded by DPN
packet forwarding, on the entire module, due to congestion on this
LP. This value is the sum of the packets discarded by all LPs due to
insufficient shared memory on this one. Note that DPRS packets
leaving the network at this module are not counted. The counter
wraps to zero when the maximum value is exceeded.
|
| rtgDpnRidFilterIndex |
.1.3.6.1.4.1.562.2.4.1.40.4.7.1.1.10 |
|
This variable represents the index for the rtgDpnRidFilter tables.
|
| rtgDpnRidFilterRowStatus |
.1.3.6.1.4.1.562.2.4.1.40.4.7.1.1.1 |
|
This variable is used as the basis for SNMP naming of
rtgDpnRidFilter components.
These components can be added and deleted.
|
| rtgDpnRidFilterComponentName |
.1.3.6.1.4.1.562.2.4.1.40.4.7.1.1.2 |
|
This variable provides the component's string name for
use with the ASCII Console Interface
|
| rtgDpnRidFilterStorageType |
.1.3.6.1.4.1.562.2.4.1.40.4.7.1.1.4 |
|
This variable represents the storage type value for the
rtgDpnRidFilter tables.
|
| rtgDpnRidFilterImportRidListValue |
.1.3.6.1.4.1.562.2.4.1.40.4.7.303.1.1 |
|
This variable represents both the value and the index for the
rtgDpnRidFilterImportRidListTable.
|
| rtgDpnRidFilterImportRidListRowStatus |
.1.3.6.1.4.1.562.2.4.1.40.4.7.303.1.2 |
|
This variable is used to control the addition and deletion
of individual values of the rtgDpnRidFilterImportRidListTable.
|
| rtgDpnRidFilterExportRidListValue |
.1.3.6.1.4.1.562.2.4.1.40.4.7.304.1.1 |
|
This variable represents both the value and the index for the
rtgDpnRidFilterExportRidListTable.
|
| rtgDpnRidFilterExportRidListRowStatus |
.1.3.6.1.4.1.562.2.4.1.40.4.7.304.1.2 |
|
This variable is used to control the addition and deletion
of individual values of the rtgDpnRidFilterExportRidListTable.
|
| rtgDpnRowStatusTable |
.1.3.6.1.4.1.562.2.4.1.40.4.1 |
|
This entry controls the addition and deletion of
rtgDpn components.
|
| rtgDpnProvTable |
.1.3.6.1.4.1.562.2.4.1.40.4.11 |
|
This group contains the provisioning data for the DpnAddressPlan.
Attributes in this group must be set to allow the DpnAddressPlan
component to function properly.
|
| rtgDpnConStatsTable |
.1.3.6.1.4.1.562.2.4.1.40.4.13 |
|
This group of attributes provides statistics about the behavior of the
DpnAddressPlan component. The statistics concern the distribution
of routing information, required to support the routing of DPN
traffic, to all Passport nodes in the RID subnet.
|
| rtgDpnFwdStatsTable |
.1.3.6.1.4.1.562.2.4.1.40.4.14 |
|
This group of attributes provides statistics for the traffic handled by
DPN packet forwarding on this module. The statistics can be used
to monitor the connectionless traffic profile on this module.
|
| rtgDpnCallServerModuleRidsTable |
.1.3.6.1.4.1.562.2.4.1.40.4.232 |
|
This attribute indicates the RIDs of the Call Server Resource
Modules (CSRMs) currently in use to support Call Server functions,
such as SCR and DCR, for the Passport subnet. Up to two CSRMs
can be in use to support such Call Server functions.
Note that packets destined to Call Server functions are routed to the
closest CSRM supporting the required server functionality.
|
| rtgDpnSubnetMidsTable |
.1.3.6.1.4.1.562.2.4.1.40.4.233 |
|
This attribute indicates which of the ReachableMidInfo (Mid)
components refer to MIDs which are members of the Passport
subnet. This list does not include AMs connected to the subnet.
|
| rtgDpnVarianceTable |
.1.3.6.1.4.1.562.2.4.1.40.4.343 |
|
This attribute specifies the variance values for high and low metric
ranges, for each class of service (COS). A variance value is the
maximum allowed difference in metric between the best path and
the second path, as a percentage of the best path metric. High and
low metric ranges are defined for each COS by the
delayMetricRangeBoundary and tputMetricRangeBoundary
attributes, and refer to total path metrics.
When a variance value for a certain COS and metric range is set to
the default value of 0, only equal metric paths can be used under
that COS when the best path metric is in that range. When it is set
to a value greater than 0, an alternate path which is safe (that is,
non-looping) and which has a metric within this percentage of the
best path metric can be used as a multipath.
The special value of 9999 signifies an infinite variance, so that any
safe alternate path may be used in addition to the single best path,
regardless of its metric.
|
| rtgDpnRidRowStatusTable |
.1.3.6.1.4.1.562.2.4.1.40.4.2.1 |
|
*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This entry controls the addition and deletion of
rtgDpnRid components.
|
| rtgDpnRidOperTable |
.1.3.6.1.4.1.562.2.4.1.40.4.2.10 |
|
*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This group of attributes is maintained by the DpnAddressPlan
component to provide information about the RIDs reachable in the
network.
|
| rtgDpnRidDelayNextHopLinkGroupsTable |
.1.3.6.1.4.1.562.2.4.1.40.4.2.226 |
|
*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This attribute indicates the delay link group, or groups, that are
being used to reach a neighbor which is the next hop in the path to
the destination RID. DPN traffic will be spread across the links, in
up to two link groups, when available. The link groups selected are
those associated with the two loop-free paths with the lowest delay
metrics to the destination.
The link group can be that of either a Passport node interconnection
or a gateway to an RM.
If no link groups are listed then the destination is not reachable in
the delay class of service (except in the case of the local node's
RID).
Link group instances are managed by the TransportResource
component. Further information about the links in the group can be
obtained from it.
|
| rtgDpnRidTputNextHopLinkGroupsTable |
.1.3.6.1.4.1.562.2.4.1.40.4.2.227 |
|
*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This attribute indicates the throughput link group, or groups, that
are being used to reach a neighbor which is the next hop in the path
to the destination RID. DPN traffic will be spread across the links,
in up to two link groups, when available. The link groups selected
are those associated with the two loop-free paths with the lowest
throughput metrics to the destination.
The link group can be that of either a Passport node interconnection
or a gateway to an RM.
If no link groups are listed then the destination is not reachable in
the throughput class of service (except in the case of the local
node's RID).
Link group instances are managed by the TransportResource
component. Further information about the links in the group can be
obtained from it.
|
| rtgDpnRidDelayPathTrafficProportionsTable |
.1.3.6.1.4.1.562.2.4.1.40.4.2.328 |
|
*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This attribute indicates the target percentages of the total delay
traffic flows to the destination which are sent over each delay path.
These percentages are achieved when there is a large number of
virtual circuits (VCs).
|
| rtgDpnRidTputPathTrafficProportionsTable |
.1.3.6.1.4.1.562.2.4.1.40.4.2.329 |
|
*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This attribute indicates the target percentages of the total throughput
traffic flows to the destination which are sent over each throughput
path. These percentages are achieved when there is a large number
of virtual circuits (VCs).
|
| rtgDpnRidDelayMetricTable |
.1.3.6.1.4.1.562.2.4.1.40.4.2.339 |
|
*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This attribute indicates the delay metrics of up to two paths to the
destination RID. The delay metric associated with a path is
computed by the routing system based on the sum of the delays
associated with the links in the path to the destination. A path with a
lower metric value is preferable to one with a higher value as it is
associated with lower delay facilities. The metrics displayed are
those of the paths being used to reach the destination.
Metric values of 2147483647 for both paths means the RID is
unreachable in the delay class of service. A metric value of
2147483647 for the second path only means that there is only one
viable delay path to the destination. A value of 0 indicates that no
cost is associated with the path to the destination. This would be the
case for the local node's RID. Metric values of 2147483646 indicate
that the destination RID is that of a Network Module (NM).
|
| rtgDpnRidTputMetricTable |
.1.3.6.1.4.1.562.2.4.1.40.4.2.340 |
|
*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This attribute indicates the throughput metrics of up to two paths to
the destination RID. The throughput metric associated with a path is
computed by the routing system based on the sum of the bandwidth
associated with the links in the path to the destination. A path with a
lower metric value is preferable to one with a higher value as it is
associated with higher bandwidth facilities. The metrics displayed
are those of the paths being used to reach the destination.
Metric values of 2147483647 for both paths means the RID is
unreachable in the throughput class of service. A metric value of
2147483647 for the second path only means that there is only one
viable throughput path to the destination. A value of 0 indicates that
no cost is associated with the path to the destination. This would be
the case for the local node's RID.
|
| rtgDpnRidMidRowStatusTable |
.1.3.6.1.4.1.562.2.4.1.40.4.2.2.1 |
|
*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This entry controls the addition and deletion of
rtgDpnRidMid components.
|
| rtgDpnMidRowStatusTable |
.1.3.6.1.4.1.562.2.4.1.40.4.3.1 |
|
*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This entry controls the addition and deletion of
rtgDpnMid components.
|
| rtgDpnMidOperTable |
.1.3.6.1.4.1.562.2.4.1.40.4.3.10 |
|
*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This group of attributes is maintained by DpnAddressPlan
component to provide information about the MIDs reachable, or
once reachable, through the local RID subnet.
|
| rtgDpnMidDelayNextHopLinkGroupsTable |
.1.3.6.1.4.1.562.2.4.1.40.4.3.228 |
|
*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This attribute indicates the delay link group, or groups, that are
being used to reach a neighbor which is the next hop in the path to
the destination MID. DPN traffic will be spread across the links, in
up to two link groups, when available. The link groups selected are
those associated with the two loop-free paths with the lowest delay
metrics to the destination.
The link group can be that of either a Passport node interconnection
or a gateway to an AM.
If no link groups are listed then the destination is not reachable in
the delay class of service (except in the case of the local node's
MID, or when a substitute RID path is available).
Link group instances are managed by the TransportResource
component. Further information about the links in the group can be
obtained from it.
|
| rtgDpnMidTputNextHopLinkGroupsTable |
.1.3.6.1.4.1.562.2.4.1.40.4.3.229 |
|
*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This attribute indicates the throughput link group, or groups, that
are being used to reach a neighbor which is the next hop in the path
to the destination MID. DPN traffic will be spread across the links,
in up to two link groups, when available. The link groups selected
are those associated with the two loop-free paths with the lowest
throughput metrics to the destination.
The link group can be that of either a Passport node interconnection
or a gateway to an AM.
If no link groups are listed then the destination is not reachable in
the throughput class of service (except in the case of the local
node's MID, or when a substitute RID path is available).
Link group instances are managed by the TransportResource
component. Further information about the links in the group can be
obtained from it.
|
| rtgDpnMidDelayMetricTable |
.1.3.6.1.4.1.562.2.4.1.40.4.3.330 |
|
*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This attribute indicates the delay metrics of up to two paths to the
destination MID. The delay metric associated with a path is
computed by the routing system based on the sum of the delays
associated with the links (or estimated delays for links to AMs) in
the path to the destination. It is computed for every possible path to
the destination and is used by the DpnAddressPlan component for
path comparison purposes. A path with a lower metric value is
preferable to one with a higher value as it is associated with lower
delay facilities. The metrics displayed are those of the paths being
used to reach the destination.
Metric values of 2147483647 for both paths means the MID is
unreachable in the delay class of service (though it might still be
reachable via its substitute RID). A metric value of 2147483647 for
the second path only means that there is only one viable delay path
to the destination.A value of 0 indicates that no cost is associated
with the path to the destination. This would be the case for the local
node's MID.
|
| rtgDpnMidTputMetricTable |
.1.3.6.1.4.1.562.2.4.1.40.4.3.331 |
|
*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This attribute indicates the throughput metrics to the destination
MID. The throughput metric associated with a path is computed by
the routing system based on the sum of the bandwidth associated
with the links (or estimated bandwidth for links to AMs) in the path
to the destination. It is computed for every possible path to the
destination and is used by the DpnAddressPlan component for path
comparison purposes. A path with a lower metric value is preferable
to one with a higher value as it is associated with higher bandwidth
facilities. The metrics displayed are those of the paths being used to
reach the destination.
Metric values of 2147483647 for both paths means the MID is
unreachable in the throughput class of service (though it might still
be reachable via its substitute RID). A metric value of 2147483647
for the second path only means that there is only one viable
throughput path to the destination. A value of 0 indicates that no
cost is associated with the path to the destination. This would be the
case for the local node's RID.
|
| rtgDpnMidDelayPathTrafficProportionsTable |
.1.3.6.1.4.1.562.2.4.1.40.4.3.332 |
|
*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This attribute indicates the target percentages of the total delay
traffic flows to the destination which are sent over each delay path.
These percentages are achieved when there is a large number of
virtual circuits (VCs).
|
| rtgDpnMidTputPathTrafficProportionsTable |
.1.3.6.1.4.1.562.2.4.1.40.4.3.333 |
|
*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This attribute indicates the target percentages of the total throughput
traffic flows to the destination which are sent over each throughput
path. These percentages are achieved when there is a large number
of virtual circuits (VCs).
|
| rtgDpnCsRowStatusTable |
.1.3.6.1.4.1.562.2.4.1.40.4.4.1 |
|
*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This entry controls the addition and deletion of
rtgDpnCs components.
|
| rtgDpnCsDelayNextHopLinkGroupsTable |
.1.3.6.1.4.1.562.2.4.1.40.4.4.230 |
|
*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This attribute indicates the delay link group, or groups, that are
being used to reach a neighbor which is the next hop in the path to
the Call Server Resource Module (CSRM) supporting the server.
DPN server traffic will be load shared across the links, in up to two
link groups, when available. The link groups selected are those
associated with the two loop-free paths with the lowest delay
metrics to the destination.
The link group can be that of either a Passport node interconnection
or a gateway to a CSRM.
If no link groups are listed then the server is not reachable in the
delay class of service.
Link group instances are managed by the TransportResource
component. Further information about the links in the group can be
obtained from it.
|
| rtgDpnCsTputNextHopLinkGroupsTable |
.1.3.6.1.4.1.562.2.4.1.40.4.4.231 |
|
*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This attribute indicates the throughput link group, or groups, that
are being used to reach a neighbor which is either the next hop in
the path to the Call Server Resource Module (CSRM) supporting
the server. DPN server traffic will be load shared across the links, in
up to two link groups, when available. The link groups selected are
those associated with the two loop-free paths with the lowest
throughput metrics to the destination.
The link group can be that of either a Passport node interconnection
or a gateway to the CSRM.
If no link groups are listed then the server is not reachable in the
throughput class of service.
Link group instances are managed by the TransportResource
component. Further information about the links in the group can be
obtained from it.
|
| rtgDpnCsDelayMetricTable |
.1.3.6.1.4.1.562.2.4.1.40.4.4.334 |
|
*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This attribute indicates the delay metrics of up to two paths to the
server supported on a Call Server Resource Module (CSRM). The
delay metric associated with a path is computed by the routing
system based on the sum of the delays associated with the links in
the path to the CSRM supporting the server. It is computed for
every possible path to the server and is used by the DpnAddressPlan
component for path comparison purposes. A path with a lower
metric value is preferable to one with a higher value as it is
associated with lower delay facilities. The metrics displayed are
those of the paths being used to reach the destination.
Metric values of 2147483647 for both paths means the server is
unreachable in the delay class of service. A metric value of
2147483647 for the second path only means that there is only one
viable delay path to the destination. A value of 0 indicates that no
cost is associated with the path to the destination.
|
| rtgDpnCsTputMetricTable |
.1.3.6.1.4.1.562.2.4.1.40.4.4.335 |
|
*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This attribute indicates the throughput metrics of up to two paths to
reach the server supported on a Call Server Resource Module
(CSRM). The throughput metric associated with a path is computed
by the routing system based on the sum of the bandwidth associated
with the links in the path to the CSRM supporting the server. It is
computed for every possible path to the server and is used by the
DpnAddressPlan component for path comparison purposes. A path
with a lower metric value is preferable to one with a higher value as
it is associated with higher bandwidth facilities. The metrics
displayed are those of the paths being used to reach the destination.
Metric values of 2147483647 for both paths means the server is
unreachable in the throughput class of service. A metric value of
2147483647 for the second path only means that there is only one
viable throughput path to the destination. A value of 0 indicates that
no cost is associated with the path to the destination.
|
| rtgDpnCsDelayPathTrafficProportionsTable |
.1.3.6.1.4.1.562.2.4.1.40.4.4.336 |
|
*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This attribute indicates the target percentages of the total delay
traffic flows to the destination which are sent over each delay path.
These percentages are achieved when there is a large number of
virtual circuits (VCs).
|
| rtgDpnCsTputPathTrafficProportionsTable |
.1.3.6.1.4.1.562.2.4.1.40.4.4.337 |
|
*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This attribute indicates the target percentages of the total throughput
traffic flows to the destination which are sent over each throughput
path. These percentages are achieved when there is a large number
of virtual circuits (VCs).
|
| rtgDpnLgRowStatusTable |
.1.3.6.1.4.1.562.2.4.1.40.4.5.1 |
|
*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This entry controls the addition and deletion of
rtgDpnLg components.
|
| rtgDpnLgOperTable |
.1.3.6.1.4.1.562.2.4.1.40.4.5.3 |
|
*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This group of attributes provides information about the gateways in
use to reach Passports, RMs and AMs connected to this Passport
node.
|
| rtgDpnLpStatsRowStatusTable |
.1.3.6.1.4.1.562.2.4.1.40.4.6.1 |
|
*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This entry controls the addition and deletion of
rtgDpnLpStats components.
|
| rtgDpnLpStatsFwdStatsTable |
.1.3.6.1.4.1.562.2.4.1.40.4.6.10 |
|
*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This group of attributes provides DPN packet forwarding statistics
for this LP. The statistics can be used to monitor the connectionless
traffic profile on this LP.
|
| rtgDpnRidFilterRowStatusTable |
.1.3.6.1.4.1.562.2.4.1.40.4.7.1 |
|
This entry controls the addition and deletion of
rtgDpnRidFilter components.
|
| rtgDpnRidFilterImportRidListTable |
.1.3.6.1.4.1.562.2.4.1.40.4.7.303 |
|
This attribute specifies the list of RIDs whose reachability
information will be accepted from the instance RID. Information
about RIDs which do not appear in this list will be ignored and this
node considers those RIDs to be unreachable from the instance
RID. Note that this also applies to the instance RID itself, that is, if
the instance RID does not appear in the import list, this node
considers the instance RID to be unreachable from the instance
RID.
By default this list contains all valid RIDs, meaning that
information about all RIDs will be accepted from the instance RID.
When this list is empty, no RID information is accepted from the
instance RID, therefore, no RID traffic will be routed to it. A
warning is generated when an empty import list is detected.
RID 127 is the Network Services Sharing (NSS) RID, used to
identify DPN-100 nodes running call servers which can be used for
remote call processing. This RID can be filtered like any other using
the import RID list.
|
| rtgDpnRidFilterExportRidListTable |
.1.3.6.1.4.1.562.2.4.1.40.4.7.304 |
|
This attribute specifies the list of RIDs whose true reachability is
advertised to the instance RID. RIDs which do not appear in this list
are advertised to the instance RID as being unreachable from this
node.
By default, this list contains all valid RIDs, meaning that true
reachability information for all RIDs is advertised to the instance
RID.
When this list is empty, all RIDs will be advertised to the instance
RID as unreachable, including this node's own RID, therefore the
instance RID will not route any RID traffic to this RID. A warning
is generated when an empty export list is detected.
RID 127 is the Network Services Sharing (NSS) RID, used to
identify DPN-100 nodes running call servers which can be used for
remote call processing. This RID can be filtered like any other using
the import RID list.
|
