| swRowStatusEntry |
.1.3.6.1.4.1.562.2.4.1.14.1.1 |
|
A single entry in the table represents a single
sw component.
|
| swOperEntry |
.1.3.6.1.4.1.562.2.4.1.14.11.1 |
|
An entry in the swOperTable.
|
| swAvlEntry |
.1.3.6.1.4.1.562.2.4.1.14.256.1 |
|
An entry in the swAvlTable.
|
| swAvListToTidyEntry |
.1.3.6.1.4.1.562.2.4.1.14.422.1 |
|
An entry in the swAvListToTidyTable.
|
| swAvListTidiedEntry |
.1.3.6.1.4.1.562.2.4.1.14.423.1 |
|
An entry in the swAvListTidiedTable.
|
| swPatlEntry |
.1.3.6.1.4.1.562.2.4.1.14.436.1 |
|
An entry in the swPatlTable.
|
| swDldRowStatusEntry |
.1.3.6.1.4.1.562.2.4.1.14.2.1.1 |
|
A single entry in the table represents a single
swDld component.
|
| swDldOperEntry |
.1.3.6.1.4.1.562.2.4.1.14.2.10.1 |
|
An entry in the swDldOperTable.
|
| swDldDldListEntry |
.1.3.6.1.4.1.562.2.4.1.14.2.260.1 |
|
An entry in the swDldDldListTable.
|
| swDldDownloadedAvListEntry |
.1.3.6.1.4.1.562.2.4.1.14.2.261.1 |
|
An entry in the swDldDownloadedAvListTable.
|
| swAvRowStatusEntry |
.1.3.6.1.4.1.562.2.4.1.14.3.1.1 |
|
A single entry in the table represents a single
swAv component.
|
| swAvOperEntry |
.1.3.6.1.4.1.562.2.4.1.14.3.10.1 |
|
An entry in the swAvOperTable.
|
| swAvCompatibleAvListEntry |
.1.3.6.1.4.1.562.2.4.1.14.3.259.1 |
|
An entry in the swAvCompatibleAvListTable.
|
| swAvFeatRowStatusEntry |
.1.3.6.1.4.1.562.2.4.1.14.3.2.1.1 |
|
A single entry in the table represents a single
swAvFeat component.
|
| swAvPatchRowStatusEntry |
.1.3.6.1.4.1.562.2.4.1.14.3.3.1.1 |
|
A single entry in the table represents a single
swAvPatch component.
|
| swAvPatchOperEntry |
.1.3.6.1.4.1.562.2.4.1.14.3.3.10.1 |
|
An entry in the swAvPatchOperTable.
|
| swLptRowStatusEntry |
.1.3.6.1.4.1.562.2.4.1.14.4.1.1 |
|
A single entry in the table represents a single
swLpt component.
|
| swLptProvEntry |
.1.3.6.1.4.1.562.2.4.1.14.4.10.1 |
|
An entry in the swLptProvTable.
|
| swLptFlEntry |
.1.3.6.1.4.1.562.2.4.1.14.4.257.1 |
|
An entry in the swLptFlTable.
|
| swLptLogicalProcessorsEntry |
.1.3.6.1.4.1.562.2.4.1.14.4.258.1 |
|
An entry in the swLptLogicalProcessorsTable.
|
| swIndex |
.1.3.6.1.4.1.562.2.4.1.14.1.1.10 |
|
This variable represents the index for the sw tables.
|
| swRowStatus |
.1.3.6.1.4.1.562.2.4.1.14.1.1.1 |
|
This variable is used as the basis for SNMP naming of
sw components.
These components cannot be added nor deleted.
|
| swComponentName |
.1.3.6.1.4.1.562.2.4.1.14.1.1.2 |
|
This variable provides the component's string name for
use with the ASCII Console Interface
|
| swStorageType |
.1.3.6.1.4.1.562.2.4.1.14.1.1.4 |
|
This variable represents the storage type value for the
sw tables.
|
| swTidyStatus |
.1.3.6.1.4.1.562.2.4.1.14.11.1.1 |
|
This attribute indicates the tidy or remove status. If the value is
inactive, no tidy or remove is in progress. If the value is inProgress
or querying, the tidy or remove process has begun and therefore no
further Tidy Sw or Remove sw/<avName> command is allowed
until status returns to inactive.
|
| swAvBeingTidied |
.1.3.6.1.4.1.562.2.4.1.14.11.1.421 |
|
This attribute indicates the name of the AV currently being tidied or
removed. An empty string indicates there is no AV being tidied.
|
| swAvlValue |
.1.3.6.1.4.1.562.2.4.1.14.256.1.1 |
|
This variable represents both the value and the index for the
swAvlTable.
|
| swAvlRowStatus |
.1.3.6.1.4.1.562.2.4.1.14.256.1.2 |
|
This variable is used to control the addition and deletion
of individual values of the swAvlTable.
|
| swAvListToTidyValue |
.1.3.6.1.4.1.562.2.4.1.14.422.1.1 |
|
This variable represents both the value and the index for the
swAvListToTidyTable.
|
| swAvListTidiedValue |
.1.3.6.1.4.1.562.2.4.1.14.423.1.1 |
|
This variable represents both the value and the index for the
swAvListTidiedTable.
|
| swPatlValue |
.1.3.6.1.4.1.562.2.4.1.14.436.1.1 |
|
This variable represents both the value and the index for the
swPatlTable.
|
| swPatlRowStatus |
.1.3.6.1.4.1.562.2.4.1.14.436.1.2 |
|
This variable is used to control the addition and deletion
of individual values of the swPatlTable.
|
| swDldIndex |
.1.3.6.1.4.1.562.2.4.1.14.2.1.1.10 |
|
This variable represents the index for the swDld tables.
|
| swDldRowStatus |
.1.3.6.1.4.1.562.2.4.1.14.2.1.1.1 |
|
This variable is used as the basis for SNMP naming of
swDld components.
These components cannot be added nor deleted.
|
| swDldComponentName |
.1.3.6.1.4.1.562.2.4.1.14.2.1.1.2 |
|
This variable provides the component's string name for
use with the ASCII Console Interface
|
| swDldStorageType |
.1.3.6.1.4.1.562.2.4.1.14.2.1.1.4 |
|
This variable represents the storage type value for the
swDld tables.
|
| swDldAvBeingDownloaded |
.1.3.6.1.4.1.562.2.4.1.14.2.10.1.1 |
|
This attribute indicates the name of the AV currently being
downloaded. If the download is inProgress, the value of this
attribute is the first AV in the list of AVs to be downloaded. If there
is no AV being downloaded, this attribute contains an empty string.
|
| swDldStatus |
.1.3.6.1.4.1.562.2.4.1.14.2.10.1.2 |
|
This attribute indicates the download status.
If it is inactive, no download is in progress. This is the value
required in order to issue a Start command.
If it is inProgress, the download procedure has begun. This process
starts from the time a Software Distribution Site (SDS) login is
attempted and continues through the time during which files are
actually being transferred.
If it is stopping, a user has requested a stoppage but the connections
have not yet been completely torn down.
|
| swDldFilesToTransfer |
.1.3.6.1.4.1.562.2.4.1.14.2.10.1.3 |
|
This attribute indicates the number of files which are still left to
transfer for the AV currently being downloaded. It is cleared each
time a new AV is processed from the avListToDownload. Note that
for each AV, the value of this attribute is 0 until the actual number of
files to transfer has been computed.
|
| swDldProcessorTargets |
.1.3.6.1.4.1.562.2.4.1.14.2.10.1.4 |
|
This attribute indicated the processor based object file to download
on switch.
Description of bits:
i960(0)
ppc(1)
|
| swDldDldListValue |
.1.3.6.1.4.1.562.2.4.1.14.2.260.1.1 |
|
This variable represents both the value and the index for the
swDldDldListTable.
|
| swDldDldListRowStatus |
.1.3.6.1.4.1.562.2.4.1.14.2.260.1.2 |
|
This variable is used to control the addition and deletion
of individual values of the swDldDldListTable.
|
| swDldDownloadedAvListValue |
.1.3.6.1.4.1.562.2.4.1.14.2.261.1.1 |
|
This variable represents both the value and the index for the
swDldDownloadedAvListTable.
|
| swAvIndex |
.1.3.6.1.4.1.562.2.4.1.14.3.1.1.10 |
|
This variable represents the index for the swAv tables.
|
| swAvRowStatus |
.1.3.6.1.4.1.562.2.4.1.14.3.1.1.1 |
|
This variable is used as the basis for SNMP naming of
swAv components.
These components cannot be added nor deleted.
|
| swAvComponentName |
.1.3.6.1.4.1.562.2.4.1.14.3.1.1.2 |
|
This variable provides the component's string name for
use with the ASCII Console Interface
|
| swAvStorageType |
.1.3.6.1.4.1.562.2.4.1.14.3.1.1.4 |
|
This variable represents the storage type value for the
swAv tables.
|
| swAvProcessorTargets |
.1.3.6.1.4.1.562.2.4.1.14.3.10.1.1 |
|
This is a list of the processor based object file types which exist on
disk for a given AV. Semantic check will validate that the object
files needed for a provisioned card type are present as part of an
application.
Description of bits:
i960(0)
ppc(1)
|
| swAvCompatibleAvListValue |
.1.3.6.1.4.1.562.2.4.1.14.3.259.1.1 |
|
This variable represents both the value and the index for the
swAvCompatibleAvListTable.
|
| swAvFeatIndex |
.1.3.6.1.4.1.562.2.4.1.14.3.2.1.1.10 |
|
This variable represents the index for the swAvFeat tables.
|
| swAvFeatRowStatus |
.1.3.6.1.4.1.562.2.4.1.14.3.2.1.1.1 |
|
This variable is used as the basis for SNMP naming of
swAvFeat components.
These components cannot be added nor deleted.
|
| swAvFeatComponentName |
.1.3.6.1.4.1.562.2.4.1.14.3.2.1.1.2 |
|
This variable provides the component's string name for
use with the ASCII Console Interface
|
| swAvFeatStorageType |
.1.3.6.1.4.1.562.2.4.1.14.3.2.1.1.4 |
|
This variable represents the storage type value for the
swAvFeat tables.
|
| swAvPatchIndex |
.1.3.6.1.4.1.562.2.4.1.14.3.3.1.1.10 |
|
This variable represents the index for the swAvPatch tables.
|
| swAvPatchRowStatus |
.1.3.6.1.4.1.562.2.4.1.14.3.3.1.1.1 |
|
This variable is used as the basis for SNMP naming of
swAvPatch components.
These components cannot be added nor deleted.
|
| swAvPatchComponentName |
.1.3.6.1.4.1.562.2.4.1.14.3.3.1.1.2 |
|
This variable provides the component's string name for
use with the ASCII Console Interface
|
| swAvPatchStorageType |
.1.3.6.1.4.1.562.2.4.1.14.3.3.1.1.4 |
|
This variable represents the storage type value for the
swAvPatch tables.
|
| swAvPatchDescription |
.1.3.6.1.4.1.562.2.4.1.14.3.3.10.1.1 |
|
This attribute indicates the new behavior that the patch provides.
The availability of this description is dependent on the disk being
available.
|
| swLptIndex |
.1.3.6.1.4.1.562.2.4.1.14.4.1.1.10 |
|
This variable represents the index for the swLpt tables.
|
| swLptRowStatus |
.1.3.6.1.4.1.562.2.4.1.14.4.1.1.1 |
|
This variable is used as the basis for SNMP naming of
swLpt components.
These components can be added and deleted.
|
| swLptComponentName |
.1.3.6.1.4.1.562.2.4.1.14.4.1.1.2 |
|
This variable provides the component's string name for
use with the ASCII Console Interface
|
| swLptStorageType |
.1.3.6.1.4.1.562.2.4.1.14.4.1.1.4 |
|
This variable represents the storage type value for the
swLpt tables.
|
| swLptCommentText |
.1.3.6.1.4.1.562.2.4.1.14.4.10.1.1 |
|
An arbitrary string used to enter a comment about an LPT.
|
| swLptSystemConfig |
.1.3.6.1.4.1.562.2.4.1.14.4.10.1.2 |
|
This attribute specifies which set of preconfigured system
parameters to use for the set of Features selected in featureList.
|
| swLptFlValue |
.1.3.6.1.4.1.562.2.4.1.14.4.257.1.1 |
|
This variable represents both the value and the index for the
swLptFlTable.
|
| swLptFlRowStatus |
.1.3.6.1.4.1.562.2.4.1.14.4.257.1.2 |
|
This variable is used to control the addition and deletion
of individual values of the swLptFlTable.
|
| swLptLogicalProcessorsValue |
.1.3.6.1.4.1.562.2.4.1.14.4.258.1.1 |
|
This variable represents both the value and the index for the
swLptLogicalProcessorsTable.
|
| swRowStatusTable |
.1.3.6.1.4.1.562.2.4.1.14.1 |
|
This entry controls the addition and deletion of
sw components.
|
| swOperTable |
.1.3.6.1.4.1.562.2.4.1.14.11 |
|
This group contain the operational attributes for the SW component.
|
| swAvlTable |
.1.3.6.1.4.1.562.2.4.1.14.256 |
|
This attribute specifies, for each application, which version of its
Features and the associated software will be loaded when any of its
Features are selected in an LPT.
A version of the 'base' application must be specified.
All names specified by the user must actually be AV names.
All AVs specified must be compatible with each other.
No more than one version of a single application can be specified.
|
| swAvListToTidyTable |
.1.3.6.1.4.1.562.2.4.1.14.422 |
|
This attribute holds the list of names of AVs to be tidied or
removed. As AVs are successfully cleaned, they are removed from
this list and added to avListTidied.
|
| swAvListTidiedTable |
.1.3.6.1.4.1.562.2.4.1.14.423 |
|
This attribute holds the list of names of AVs which have been
successfully tidied or removed as a result of the last Tidy Sw or
Remove Sw av/<avName> command. It is cleared each time a new
Tidy Sw or Remove Sw av/<avName> command is issued.
|
| swPatlTable |
.1.3.6.1.4.1.562.2.4.1.14.436 |
|
This attribute specifies which patches are to be loaded and enabled.
Only patches for Av's that appear in the AvList may be specified.
Only patches appearing as instances of Sw Av Patch may be
specified.
Patch names are case insensitive. Except for case, patch names must
be typed as they appear as instances of Sw Av Patch.
All patches specified must be compatible with one another.
Any prerequisite patches for specified patches, must themselves be
specified.
A patch must be specified only once in the list.
|
| swDldRowStatusTable |
.1.3.6.1.4.1.562.2.4.1.14.2.1 |
|
This entry controls the addition and deletion of
swDld components.
|
| swDldOperTable |
.1.3.6.1.4.1.562.2.4.1.14.2.10 |
|
This group contains the operational attributes for the Download
component.
|
| swDldDldListTable |
.1.3.6.1.4.1.562.2.4.1.14.2.260 |
|
This attribute holds the list of names of AVs to be downloaded. If a
download is in progress, the first one in the list is the one currently
being downloaded. As AVs are successfully downloaded, they are
removed from this list and added to the downloadedAvList.
The user cannot specify an AV which already exists on disk. It must
first be removed before re-downloading it (see the Tidy and Remove
commands).
|
| swDldDownloadedAvListTable |
.1.3.6.1.4.1.562.2.4.1.14.2.261 |
|
This attribute holds the list of names of AVs which have been
successfully downloaded as a result of the last Start command. It is
cleared each time the Start command is issued.
|
| swAvRowStatusTable |
.1.3.6.1.4.1.562.2.4.1.14.3.1 |
|
*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This entry controls the addition and deletion of
swAv components.
|
| swAvOperTable |
.1.3.6.1.4.1.562.2.4.1.14.3.10 |
|
*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This group contains the operational attributes for an AV component.
|
| swAvCompatibleAvListTable |
.1.3.6.1.4.1.562.2.4.1.14.3.259 |
|
*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This is a list of the AV names which specify the minimum version
of all other applications that can be used in conjunction with this AV
in an AVL. Semantic checks will validate that AVs within the AVL
are indeed compatible.
|
| swAvFeatRowStatusTable |
.1.3.6.1.4.1.562.2.4.1.14.3.2.1 |
|
*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This entry controls the addition and deletion of
swAvFeat components.
|
| swAvPatchRowStatusTable |
.1.3.6.1.4.1.562.2.4.1.14.3.3.1 |
|
*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This entry controls the addition and deletion of
swAvPatch components.
|
| swAvPatchOperTable |
.1.3.6.1.4.1.562.2.4.1.14.3.3.10 |
|
*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This group contains the operational attributes for the Patch
component.
|
| swLptRowStatusTable |
.1.3.6.1.4.1.562.2.4.1.14.4.1 |
|
This entry controls the addition and deletion of
swLpt components.
|
| swLptProvTable |
.1.3.6.1.4.1.562.2.4.1.14.4.10 |
|
This group contains the provisionable attributes for the LPT
component.
|
| swLptFlTable |
.1.3.6.1.4.1.562.2.4.1.14.4.257 |
|
This attribute specifies a list of names of Features that define a
particular configuration of application functionality that the user
wants to load on a single processor.
The combination of Features selected must be compatible (for
example, none can be mutually exclusive with another in the list).
All Features must belong to an AV specified in the AVL.
All Features must be able to be loaded on any of the Cards which
are linked to LPs which are linked to this LPT.
All prerequisite Features of the ones in this list will also be loaded.
|
| swLptLogicalProcessorsTable |
.1.3.6.1.4.1.562.2.4.1.14.4.258 |
|
This attribute shows which LPs are configured to load the Feature
files associated with this LPT. It is the opposite side of the LP
component's logicalProcessorType link attribute.
|
