ATM-ACCOUNTING-INFORMATION-MIB device MIB details by RFC
ATM-ACCOUNTING-INFORMATION-MIB file content
The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.
Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.
Use ActiveXperts Network Monitor 2024 to import vendor-specific MIB files, inclusing ATM-ACCOUNTING-INFORMATION-MIB.
Vendor: | RFC |
---|---|
Mib: | ATM-ACCOUNTING-INFORMATION-MIB [download] [view objects] |
Tool: | ActiveXperts Network Monitor 2024 [download] (ships with advanced SNMP/MIB tools) |
-- WinAgents MIB Extraction Wizard -- Extracted from rfc2512.txt 16.03.2005 20:21:48 ATM-ACCOUNTING-INFORMATION-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, OBJECT-IDENTITY, mib-2, Integer32, Counter64 FROM SNMPv2-SMI DisplayString, DateAndTime FROM SNMPv2-TC AtmAddr FROM ATM-TC-MIB; atmAccountingInformationMIB MODULE-IDENTITY LAST-UPDATED "9611052000Z" ORGANIZATION "IETF AToM MIB Working Group" CONTACT-INFO " Keith McCloghrie Cisco Systems, Inc. 170 West Tasman Drive, San Jose CA 95134-1706. Phone: +1 408 526 5260 Email: kzm@cisco.com" DESCRIPTION "The MIB module for identifying items of accounting information which are applicable to ATM connections." ::= { mib-2 59 } atmAcctngMIBObjects OBJECT IDENTIFIER ::= { atmAccountingInformationMIB 1 } -- Definitions of objects for use in specifying ATM accounting -- data to be collected atmAcctngDataObjects OBJECT-IDENTITY STATUS current DESCRIPTION "This identifier defines a subtree under which various objects are defined such that a set of objects to be collected as ATM accounting data can be specified as a (subtree, list) tuple using this identifier as the subtree." ::= { atmAcctngMIBObjects 1 } -- Objects defined under the atmAcctngDataObjects subtree -- -- In each case the semantics of the object are interpreted with -- respect to the creation/storage of an accounting record for a -- particular connection on a particular interface. atmAcctngConnectionType OBJECT-TYPE SYNTAX INTEGER { pvc(1), pvp(2), svcIncoming(3), svcOutgoing(4), svpIncoming(5), svpOutgoing(6), spvcInitiator(7), spvcTarget(8), spvpInitiator(9), spvpTarget(10) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "The type of connection." ::= { atmAcctngDataObjects 1 } atmAcctngCastType OBJECT-TYPE SYNTAX INTEGER { p2p(1), p2mp(2) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "An indication of whether the connection is point-to-point or point-to-multipoint." ::= { atmAcctngDataObjects 2 } atmAcctngIfName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS not-accessible STATUS current DESCRIPTION "A textual name for the interface on which the data for the connection was collected. If the local SNMP agent supports the object ifName, the value of this object must be identical to that of ifName in the conceptual row of the ifTable corresponding to this interface." ::= { atmAcctngDataObjects 3 } atmAcctngIfAlias OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS not-accessible STATUS current DESCRIPTION "The 'alias' name for the interface as specified by a network manager, e.g., via a management set operation to modify the relevant instance of the ifAlias object. Note that in contrast to ifIndex, ifAlias provides a non-volatile 'handle' for the interface, the value of which is retained across agent reboots." ::= { atmAcctngDataObjects 4 } atmAcctngVpi OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The VPI used for the connection." ::= { atmAcctngDataObjects 5 } atmAcctngVci OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The VCI used for the connection." ::= { atmAcctngDataObjects 6 } atmAcctngCallingParty OBJECT-TYPE SYNTAX AtmAddr MAX-ACCESS not-accessible STATUS current DESCRIPTION "The connection's calling party. If unknown (e.g., for a PVC), then the value of this object is the zero-length string." ::= { atmAcctngDataObjects 7 } atmAcctngCalledParty OBJECT-TYPE SYNTAX AtmAddr MAX-ACCESS not-accessible STATUS current DESCRIPTION "The connection's called party. If unknown (e.g., for a PVC), then the value of this object is the zero-length string." ::= { atmAcctngDataObjects 8 } atmAcctngCallReference OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..3)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The connection's call reference value (e.g., from Q.2931). If unknown (e.g., for a PVC), then the value of this object is the zero-length string." ::= { atmAcctngDataObjects 9 } atmAcctngStartTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS not-accessible STATUS current DESCRIPTION "The time when the connection was established." ::= { atmAcctngDataObjects 10 } atmAcctngCollectionTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS not-accessible STATUS current DESCRIPTION "The time at which the data in this record was collected." ::= { atmAcctngDataObjects 11 } atmAcctngCollectMode OBJECT-TYPE SYNTAX INTEGER { onRelease(1), periodically(2), onCommand(3) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "The reason why this connection data was collected." ::= { atmAcctngDataObjects 12 } atmAcctngReleaseCause OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "If the connection data was collected because of the release of an SVC, then this is the cause code in the Release message for the connection; otherwise, this object has the value zero." ::= { atmAcctngDataObjects 13 } atmAcctngServiceCategory OBJECT-TYPE SYNTAX INTEGER { other(1), cbr(2), vbrRt(3), vbrNrt(4), abr(5), ubr(6), unknown(7) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "The connection's service category." ::= { atmAcctngDataObjects 14 } atmAcctngTransmittedCells OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The number of cells, including OAM cells, transmitted by this switch on this connection." ::= { atmAcctngDataObjects 15 } atmAcctngTransmittedClp0Cells OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The number of cells with CLP=0, including OAM cells, transmitted by this switch on this connection." ::= { atmAcctngDataObjects 16 } atmAcctngReceivedCells OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The number of cells, including OAM cells, received by this switch on this connection." ::= { atmAcctngDataObjects 17 } atmAcctngReceivedClp0Cells OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The number of cells with CLP=0, including OAM cells, received by this switch on this connection." ::= { atmAcctngDataObjects 18 } atmAcctngTransmitTrafficDescriptorType OBJECT-TYPE SYNTAX OBJECT IDENTIFIER MAX-ACCESS not-accessible STATUS current DESCRIPTION "The traffic descriptor type (as defined in RFC 1695 and its successors) in the direction in which the switch transmits cells on the connection." REFERENCE "See atmTrafficDescriptorTypes in ATM-MIB.my in RFC 1695 and its successors." ::= { atmAcctngDataObjects 19 } atmAcctngTransmitTrafficDescriptorParam1 OBJECT-TYPE SYNTAX INTEGER (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The first traffic descriptor parameter in the direction in which this switch transmits cells on this connection. Interpretation of this parameter is dependent on the value of atmAcctngTransmitTrafficDescriptorType." ::= { atmAcctngDataObjects 20 } atmAcctngTransmitTrafficDescriptorParam2 OBJECT-TYPE SYNTAX INTEGER (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The second traffic descriptor parameter in the direction in which this switch transmits cells on this connection. Interpretation of this parameter is dependent on the value of atmAcctngTransmitTrafficDescriptorType." ::= { atmAcctngDataObjects 21 } atmAcctngTransmitTrafficDescriptorParam3 OBJECT-TYPE SYNTAX INTEGER (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The third traffic descriptor parameter in the direction in which this switch transmits cells on this connection. Interpretation of this parameter is dependent on the value of atmAcctngTransmitTrafficDescriptorType." ::= { atmAcctngDataObjects 22 } atmAcctngTransmitTrafficDescriptorParam4 OBJECT-TYPE SYNTAX INTEGER (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The fourth traffic descriptor parameter in the direction in which this switch transmits cells on this connection. Interpretation of this parameter is dependent on the value of atmAcctngTransmitTrafficDescriptorType." ::= { atmAcctngDataObjects 23 } atmAcctngTransmitTrafficDescriptorParam5 OBJECT-TYPE SYNTAX INTEGER (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The fifth traffic descriptor parameter in the direction in which this switch transmits cells on this connection. Interpretation of this parameter is dependent on the value of atmAcctngTransmitTrafficDescriptorType." ::= { atmAcctngDataObjects 24 } atmAcctngReceiveTrafficDescriptorType OBJECT-TYPE SYNTAX OBJECT IDENTIFIER MAX-ACCESS not-accessible STATUS current DESCRIPTION "The traffic descriptor type (as defined in RFC 1695 and its successors) in the direction in which this switch receives cells on this connection." REFERENCE "See atmTrafficDescriptorTypes in ATM-MIB.my in RFC 1695 and its successors." ::= { atmAcctngDataObjects 25 } atmAcctngReceiveTrafficDescriptorParam1 OBJECT-TYPE SYNTAX INTEGER (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The first traffic descriptor parameter in the direction in which this switch receives cells on this connection. Interpretation of this parameter is dependent on the value of atmAcctngReceiveTrafficDescriptorType." ::= { atmAcctngDataObjects 26 } atmAcctngReceiveTrafficDescriptorParam2 OBJECT-TYPE SYNTAX INTEGER (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The second traffic descriptor parameter in the direction in which this switch receives cells on this connection. Interpretation of this parameter is dependent on the value of atmAcctngReceiveTrafficDescriptorType." ::= { atmAcctngDataObjects 27 } atmAcctngReceiveTrafficDescriptorParam3 OBJECT-TYPE SYNTAX INTEGER (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The third traffic descriptor parameter in the direction in which this switch receives cells on this connection. Interpretation of this parameter is dependent on the value of atmAcctngReceiveTrafficDescriptorType." ::= { atmAcctngDataObjects 28 } atmAcctngReceiveTrafficDescriptorParam4 OBJECT-TYPE SYNTAX INTEGER (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The fourth traffic descriptor parameter in the direction in which this switch receives cells on this connection. Interpretation of this parameter is dependent on the value of atmAcctngReceiveTrafficDescriptorType." ::= { atmAcctngDataObjects 29 } atmAcctngReceiveTrafficDescriptorParam5 OBJECT-TYPE SYNTAX INTEGER (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The fifth traffic descriptor parameter in the direction in which this switch receives cells on this connection. Interpretation of this parameter is dependent on the value of atmAcctngReceiveTrafficDescriptorType." ::= { atmAcctngDataObjects 30 } atmAcctngCallingPartySubAddress OBJECT-TYPE SYNTAX AtmAddr MAX-ACCESS not-accessible STATUS current DESCRIPTION "The connection's calling party sub-address. If the connection has no calling party sub-address, or it's value is unknown, then the value of this object is the zero-length string." ::= { atmAcctngDataObjects 31 } atmAcctngCalledPartySubAddress OBJECT-TYPE SYNTAX AtmAddr MAX-ACCESS not-accessible STATUS current DESCRIPTION "The connection's called party sub-address. If the connection has no called party sub-address, or it's value is unknown, then the value of this object is the zero-length string." ::= { atmAcctngDataObjects 32 } atmAcctngRecordCrc16 OBJECT-TYPE SYNTAX OCTET STRING (SIZE(2)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of the CRC-16 checksum (as defined by ISO 3309 (HDLC) and/or ITU X.25) calculated over the accounting record containing this object. While the mechanism for calculating/encoding the checksum value is specific to the method of encoding the accounting record, an accounting record containing this object is typically generated by initializing the value of this object to the all-zeros string ('0000'H), with the location of these zeros being saved. After generating the record, the checksum is calculated over the whole connection record and then the all-zeros value is overwritten (at the saved location) by the calculated value of the checksum." ::= { atmAcctngDataObjects 33 } END