DPI20-MIB device MIB details by RFC

DPI20-MIB file content

The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.

Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.

Use ActiveXperts Network Monitor 2024 to import vendor-specific MIB files, inclusing DPI20-MIB.

Vendor:	RFC
Mib:	DPI20-MIB  [download]  [view objects]
Tool:	ActiveXperts Network Monitor 2024 [download]    (ships with advanced SNMP/MIB tools)

-- WinAgents MIB Extraction Wizard
-- Extracted from rfc1592.txt 16.03.2005 20:20:19

DPI20-MIB DEFINITIONS ::= BEGIN

-- Objects in this MIB are implemented in the local SNMP agent.

   IMPORTS
           MODULE-IDENTITY, OBJECT-TYPE, enterprises
                   FROM RFC1155-SMI;

   ibm      OBJECT IDENTIFIER ::= { enterprises 2 }
   ibmDPI   OBJECT IDENTIFIER ::= { ibm 2 }
   dpi20MIB OBJECT IDENTIFIER ::= { ibmDPI 1 }

-- dpi20MIB MODULE-IDENTITY
--   LAST-UPDATED "9401210000Z"
--   ORGANIZATION "IBM Research - T.J. Watson Research Center"
--   CONTACT-INFO "           Bert Wijnen
--                 Postal:    IBM International Operations
--                            Watsonweg 2
--                            1423 ND Uithoorn
--                            The Netherlands

--                 Tel:       +31 2975 53316
--                 Fax:       +31 2975 62468
--                 E-mail:    wijnen@vnet.ibm.com"
--   DESCRIPTION "MIB module describing DPI objects."
--   ::= { snmpModules x }

   dpiPort  OBJECT IDENTIFIER ::= { dpi20MIB 1 }

   dpiPortForTCP   OBJECT-TYPE
           SYNTAX  INTEGER (0..65535)
           ACCESS  read-only
           STATUS  mandatory
           DESCRIPTION "The TCP port number on which the agent
                        listens for DPI connections. A zero value
                        means the agent has no DPI TCP port."
           ::= { dpiPort 1 }

   dpiPortForUDP   OBJECT-TYPE
           SYNTAX  INTEGER (0..65535)
           ACCESS  read-only
           STATUS  mandatory
           DESCRIPTION "The UDP port number on which the agent
                        listens for DPI packets. A zero value
                        means the agent has no DPI UDP port."
           ::= { dpiPort 2 }
END