| fcFeModuleIndex |
.1.3.6.1.2.1.75.1.1.4.1.1 |
|
This object identifies the module within the Fabric Element
for which this entry contains information. This value is
never greater than fcFeModuleCapacity.
|
| fcFeModuleDescr |
.1.3.6.1.2.1.75.1.1.4.1.2 |
|
A textual description of the module. This value should
include the full name and version identification of the
module.
|
| fcFeModuleObjectID |
.1.3.6.1.2.1.75.1.1.4.1.3 |
|
The vendor's authoritative identification of the module.
This value may be allocated within the SMI enterprises
subtree (1.3.6.1.4.1) and provides a straight-forward and
unambiguous means for determining what kind of module is
being managed.
For example, this object could take the value
1.3.6.1.4.1.99649.3.9 if vendor 'Neufe Inc.' was assigned
the subtree 1.3.6.1.4.1.99649, and had assigned the
identifier 1.3.6.1.4.1.99649.3.9 to its 'FeFiFo-16
PlugInCard.'
|
| fcFeModuleOperStatus |
.1.3.6.1.2.1.75.1.1.4.1.4 |
|
This object indicates the operational status of the module:
online(1) the module is functioning properly;
offline(2) the module is not available;
testing(3) the module is under testing; and
faulty(4) the module is defective in some way.
|
| fcFeModuleLastChange |
.1.3.6.1.2.1.75.1.1.4.1.5 |
|
This object contains the value of sysUpTime when the module
entered its current operational status. A value of zero
indicates that the operational status of the module has not
changed since the agent last restarted.
|
| fcFeModuleFxPortCapacity |
.1.3.6.1.2.1.75.1.1.4.1.6 |
|
The number of FxPort that can be contained within the
module. Within each module, the ports are uniquely numbered
in the range from 1 to fcFeModuleFxPortCapacity inclusive.
However, the numbers are not required to be contiguous.
|
| fcFeModuleName |
.1.3.6.1.2.1.75.1.1.4.1.7 |
|
The Name_Identifier of the module.
|
| fcFxPortIndex |
.1.3.6.1.2.1.75.1.1.5.1.1 |
|
This object identifies the FxPort within the module. This
number ranges from 1 to the value of fcFeModulePortCapacity
for the associated module. The value remains constant for
the identified FxPort until the module is re-initialized.
|
| fcFxPortName |
.1.3.6.1.2.1.75.1.1.5.1.2 |
|
The World_wide Name of this FxPort. Each FxPort has a
unique Port World_wide Name within the Fabric.
|
| fcFxPortFcphVersionHigh |
.1.3.6.1.2.1.75.1.1.5.1.3 |
|
The highest or most recent version of FC-PH that the FxPort
is configured to support.
|
| fcFxPortFcphVersionLow |
.1.3.6.1.2.1.75.1.1.5.1.4 |
|
The lowest or earliest version of FC-PH that the FxPort is
configured to support.
|
| fcFxPortBbCredit |
.1.3.6.1.2.1.75.1.1.5.1.5 |
|
The total number of receive buffers available for holding
Class 1 connect-request, Class 2 or 3 frames from the
attached NxPort. It is for buffer-to-buffer flow control
in the direction from the attached NxPort (if applicable)
to FxPort.
|
| fcFxPortRxBufSize |
.1.3.6.1.2.1.75.1.1.5.1.6 |
|
The largest Data_Field Size (in octets) for an FT_1 frame
that can be received by the FxPort.
|
| fcFxPortRatov |
.1.3.6.1.2.1.75.1.1.5.1.7 |
|
The Resource_Allocation_Timeout Value configured for the
FxPort. This is used as the timeout value for determining
when to reuse an NxPort resource such as a
Recovery_Qualifier. It represents E_D_TOV (see next
object) plus twice the maximum time that a frame may be
delayed within the Fabric and still be delivered.
|
| fcFxPortEdtov |
.1.3.6.1.2.1.75.1.1.5.1.8 |
|
The E_D_TOV value configured for the FxPort. The
Error_Detect_Timeout Value is used as the timeout value for
detecting an error condition.
|
| fcFxPortCosSupported |
.1.3.6.1.2.1.75.1.1.5.1.9 |
|
A value indicating the set of Classes of Service supported
by the FxPort.
|
| fcFxPortIntermixSupported |
.1.3.6.1.2.1.75.1.1.5.1.10 |
|
A flag indicating whether or not the FxPort supports an
Intermixed Dedicated Connection.
|
| fcFxPortStackedConnMode |
.1.3.6.1.2.1.75.1.1.5.1.11 |
|
A value indicating the mode of Stacked Connect supported by
the FxPort.
|
| fcFxPortClass2SeqDeliv |
.1.3.6.1.2.1.75.1.1.5.1.12 |
|
A flag indicating whether or not Class 2 Sequential
Delivery is supported by the FxPort.
|
| fcFxPortClass3SeqDeliv |
.1.3.6.1.2.1.75.1.1.5.1.13 |
|
A flag indicating whether or not Class 3 Sequential
Delivery is supported by the FxPort.
|
| fcFxPortHoldTime |
.1.3.6.1.2.1.75.1.1.5.1.14 |
|
The maximum time (in microseconds) that the FxPort shall
hold a frame before discarding the frame if it is unable to
deliver the frame. The value 0 means that the FxPort does
not support this parameter.
|
| fcFxPortID |
.1.3.6.1.2.1.75.1.2.1.1.1 |
|
The address identifier by which this FxPort is identified
within the Fabric. The FxPort may assign its address
identifier to its attached NxPort(s) during Fabric Login.
|
| fcFxPortBbCreditAvailable |
.1.3.6.1.2.1.75.1.2.1.1.2 |
|
The number of buffers currently available for receiving
frames from the attached port in the buffer-to-buffer flow
control. The value should be less than or equal to
fcFxPortBbCredit.
|
| fcFxPortOperMode |
.1.3.6.1.2.1.75.1.2.1.1.3 |
|
The current operational mode of the FxPort.
|
| fcFxPortAdminMode |
.1.3.6.1.2.1.75.1.2.1.1.4 |
|
The desired operational mode of the FxPort.
|
| fcFxPortPhysAdminStatus |
.1.3.6.1.2.1.75.1.2.2.1.1 |
|
The desired state of the FxPort. A management station may
place the FxPort in a desired state by setting this object
accordingly. The testing(3) state indicates that no
operational frames can be passed. When a Fabric Element
initializes, all FxPorts start with fcFxPortPhysAdminStatus
in the offline(2) state. As the result of either explicit
management action or per configuration information
accessible by the Fabric Element, fcFxPortPhysAdminStatus
is then changed to either the online(1) or testing(3)
states, or remains in the offline state.
|
| fcFxPortPhysOperStatus |
.1.3.6.1.2.1.75.1.2.2.1.2 |
|
The current operational status of the FxPort. The
testing(3) indicates that no operational frames can be
passed. If fcFxPortPhysAdminStatus is offline(2) then
fcFxPortPhysOperStatus should be offline(2). If
fcFxPortPhysAdminStatus is changed to online(1) then
fcFxPortPhysOperStatus should change to online(1) if the
FxPort is ready to accept Fabric Login request from the
attached NxPort; it should proceed and remain in the link-
failure(4) state if and only if there is a fault that
prevents it from going to the online(1) state.
|
| fcFxPortPhysLastChange |
.1.3.6.1.2.1.75.1.2.2.1.3 |
|
The value of sysUpTime at the time the FxPort entered its
current operational status. A value of zero indicates that
the FxPort's operational status has not changed since the
agent last restarted.
|
| fcFxPortPhysRttov |
.1.3.6.1.2.1.75.1.2.2.1.4 |
|
The Receiver_Transmitter_Timeout value of the FxPort. This
is used by the receiver logic to detect Loss of
Synchronization.
|
| fcFxPortNxLoginIndex |
.1.3.6.1.2.1.75.1.2.3.1.1 |
|
The object identifies the associated NxPort in the
attachment for which the entry contains information.
|
| fcFxPortFcphVersionAgreed |
.1.3.6.1.2.1.75.1.2.3.1.2 |
|
The version of FC-PH that the FxPort has agreed to support
from the Fabric Login
|
| fcFxPortNxPortBbCredit |
.1.3.6.1.2.1.75.1.2.3.1.3 |
|
The total number of buffers available for holding Class 1
connect-request, Class 2 or Class 3 frames to be
transmitted to the attached NxPort. It is for buffer-to-
buffer flow control in the direction from FxPort to NxPort.
The buffer-to-buffer flow control mechanism is indicated in
the respective fcFxPortBbCreditModel.
|
| fcFxPortNxPortRxDataFieldSize |
.1.3.6.1.2.1.75.1.2.3.1.4 |
|
The Receive Data Field Size of the attached NxPort. This
object specifies the largest Data Field Size for an FT_1
frame that can be received by the NxPort.
|
| fcFxPortCosSuppAgreed |
.1.3.6.1.2.1.75.1.2.3.1.5 |
|
A variable indicating that the attached NxPort has
requested the FxPort for the support of classes of services
and the FxPort has granted the request.
|
| fcFxPortIntermixSuppAgreed |
.1.3.6.1.2.1.75.1.2.3.1.6 |
|
A variable indicating that the attached NxPort has
requested the FxPort for the support of Intermix and the
FxPort has granted the request. This flag is only valid if
Class 1 service is supported.
|
| fcFxPortStackedConnModeAgreed |
.1.3.6.1.2.1.75.1.2.3.1.7 |
|
A variable indicating whether the FxPort has agreed to
support stacked connect from the Fabric Login. This is only
meaningful if Class 1 service has been agreed.
|
| fcFxPortClass2SeqDelivAgreed |
.1.3.6.1.2.1.75.1.2.3.1.8 |
|
A variable indicating whether the FxPort has agreed to
support Class 2 sequential delivery from the Fabric Login.
This is only meaningful if Class 2 service has been
agreed.
|
| fcFxPortClass3SeqDelivAgreed |
.1.3.6.1.2.1.75.1.2.3.1.9 |
|
A flag indicating whether the FxPort has agreed to support
Class 3 sequential delivery from the Fabric Login. This is
only meaningful if Class 3 service has been agreed.
|
| fcFxPortNxPortName |
.1.3.6.1.2.1.75.1.2.3.1.10 |
|
The port name of the attached NxPort.
|
| fcFxPortConnectedNxPort |
.1.3.6.1.2.1.75.1.2.3.1.11 |
|
The address identifier of the destination NxPort with which
this FxPort is currently engaged in a either a Class 1 or
loop connection. If this FxPort is not engaged in a
connection, then the value of this object is '000000'H.
|
| fcFxPortBbCreditModel |
.1.3.6.1.2.1.75.1.2.3.1.12 |
|
This object identifies the BB_Credit model used by the
FxPort.
|
| fcFxPortLinkFailures |
.1.3.6.1.2.1.75.1.3.1.1.1 |
|
The number of link failures detected by this FxPort.
|
| fcFxPortSyncLosses |
.1.3.6.1.2.1.75.1.3.1.1.2 |
|
The number of loss of synchronization detected by the
FxPort.
|
| fcFxPortSigLosses |
.1.3.6.1.2.1.75.1.3.1.1.3 |
|
The number of loss of signal detected by the FxPort.
|
| fcFxPortPrimSeqProtoErrors |
.1.3.6.1.2.1.75.1.3.1.1.4 |
|
The number of primitive sequence protocol errors detected
by the FxPort.
|
| fcFxPortInvalidTxWords |
.1.3.6.1.2.1.75.1.3.1.1.5 |
|
The number of invalid transmission word detected by the
FxPort.
|
| fcFxPortInvalidCrcs |
.1.3.6.1.2.1.75.1.3.1.1.6 |
|
The number of invalid CRC detected by this FxPort.
|
| fcFxPortDelimiterErrors |
.1.3.6.1.2.1.75.1.3.1.1.7 |
|
The number of Delimiter Errors detected by this FxPort.
|
| fcFxPortAddressIdErrors |
.1.3.6.1.2.1.75.1.3.1.1.8 |
|
The number of address identifier errors detected by this
FxPort.
|
| fcFxPortLinkResetIns |
.1.3.6.1.2.1.75.1.3.1.1.9 |
|
The number of Link Reset Protocol received by this FxPort
from the attached NxPort.
|
| fcFxPortLinkResetOuts |
.1.3.6.1.2.1.75.1.3.1.1.10 |
|
The number of Link Reset Protocol issued by this FxPort to
the attached NxPort.
|
| fcFxPortOlsIns |
.1.3.6.1.2.1.75.1.3.1.1.11 |
|
The number of Offline Sequence received by this FxPort.
|
| fcFxPortOlsOuts |
.1.3.6.1.2.1.75.1.3.1.1.12 |
|
The number of Offline Sequence issued by this FxPort.
|
| fcFxPortC1InFrames |
.1.3.6.1.2.1.75.1.4.1.1.1 |
|
The number of Class 1 frames (other than Class 1 connect-
request) received by this FxPort from its attached NxPort.
|
| fcFxPortC1OutFrames |
.1.3.6.1.2.1.75.1.4.1.1.2 |
|
The number of Class 1 frames (other than Class 1 connect-
request) delivered through this FxPort to its attached
NxPort.
|
| fcFxPortC1InOctets |
.1.3.6.1.2.1.75.1.4.1.1.3 |
|
The number of Class 1 frame octets, including the frame
delimiters, received by this FxPort from its attached
NxPort.
|
| fcFxPortC1OutOctets |
.1.3.6.1.2.1.75.1.4.1.1.4 |
|
The number of Class 1 frame octets, including the frame
delimiters, delivered through this FxPort its attached
NxPort.
|
| fcFxPortC1Discards |
.1.3.6.1.2.1.75.1.4.1.1.5 |
|
The number of Class 1 frames discarded by this FxPort.
|
| fcFxPortC1FbsyFrames |
.1.3.6.1.2.1.75.1.4.1.1.6 |
|
The number of F_BSY frames generated by this FxPort against
Class 1 connect-request.
|
| fcFxPortC1FrjtFrames |
.1.3.6.1.2.1.75.1.4.1.1.7 |
|
The number of F_RJT frames generated by this FxPort against
Class 1 connect-request.
|
| fcFxPortC1InConnections |
.1.3.6.1.2.1.75.1.4.1.1.8 |
|
The number of Class 1 connections successfully established
in which the attached NxPort is the source of the connect-
request.
|
| fcFxPortC1OutConnections |
.1.3.6.1.2.1.75.1.4.1.1.9 |
|
The number of Class 1 connections successfully established
in which the attached NxPort is the destination of the
connect-request.
|
| fcFxPortC1ConnTime |
.1.3.6.1.2.1.75.1.4.1.1.10 |
|
The cumulative time that this FxPort has been engaged in
Class 1 connection. The amount of time is counted from
after a connect-request has been accepted until the
connection is disengaged, either by an EOFdt or Link
Reset.
|
| fcFxPortC2InFrames |
.1.3.6.1.2.1.75.1.4.2.1.1 |
|
The number of Class 2 frames received by this FxPort from
its attached NxPort.
|
| fcFxPortC2OutFrames |
.1.3.6.1.2.1.75.1.4.2.1.2 |
|
The number of Class 2 frames delivered through this FxPort
to its attached NxPort.
|
| fcFxPortC2InOctets |
.1.3.6.1.2.1.75.1.4.2.1.3 |
|
The number of Class 2 frame octets, including the frame
delimiters, received by this FxPort from its attached
NxPort.
|
| fcFxPortC2OutOctets |
.1.3.6.1.2.1.75.1.4.2.1.4 |
|
The number of Class 2 frame octets, including the frame
delimiters, delivered through this FxPort to its attached
NxPort.
|
| fcFxPortC2Discards |
.1.3.6.1.2.1.75.1.4.2.1.5 |
|
The number of Class 2 frames discarded by this FxPort.
|
| fcFxPortC2FbsyFrames |
.1.3.6.1.2.1.75.1.4.2.1.6 |
|
The number of F_BSY frames generated by this FxPort against
Class 2 frames.
|
| fcFxPortC2FrjtFrames |
.1.3.6.1.2.1.75.1.4.2.1.7 |
|
The number of F_RJT frames generated by this FxPort against
Class 2 frames.
|
| fcFxPortC3InFrames |
.1.3.6.1.2.1.75.1.4.3.1.1 |
|
The number of Class 3 frames received by this FxPort from
its attached NxPort.
|
| fcFxPortC3OutFrames |
.1.3.6.1.2.1.75.1.4.3.1.2 |
|
The number of Class 3 frames delivered through this FxPort
to its attached NxPort.
|
| fcFxPortC3InOctets |
.1.3.6.1.2.1.75.1.4.3.1.3 |
|
The number of Class 3 frame octets, including the frame
delimiters, received by this FxPort from its attached
NxPort.
|
| fcFxPortC3OutOctets |
.1.3.6.1.2.1.75.1.4.3.1.4 |
|
The number of Class 3 frame octets, including the frame
delimiters, delivered through this FxPort to its attached
NxPort.
|
| fcFxPortC3Discards |
.1.3.6.1.2.1.75.1.4.3.1.5 |
|
The number of Class 3 frames discarded by this FxPort.
|
| fcFxPortCapFcphVersionHigh |
.1.3.6.1.2.1.75.1.5.1.1.1 |
|
The highest or most recent version of FC-PH that the FxPort
is capable of supporting.
|
| fcFxPortCapFcphVersionLow |
.1.3.6.1.2.1.75.1.5.1.1.2 |
|
The lowest or earliest version of FC-PH that the FxPort is
capable of supporting.
|
| fcFxPortCapBbCreditMax |
.1.3.6.1.2.1.75.1.5.1.1.3 |
|
The maximum number of receive buffers available for holding
Class 1 connect-request, Class 2 or Class 3 frames from the
attached NxPort.
|
| fcFxPortCapBbCreditMin |
.1.3.6.1.2.1.75.1.5.1.1.4 |
|
The minimum number of receive buffers available for holding
Class 1 connect-request, Class 2 or Class 3 frames from the
attached NxPort.
|
| fcFxPortCapRxDataFieldSizeMax |
.1.3.6.1.2.1.75.1.5.1.1.5 |
|
The maximum size in bytes of the Data Field in a frame that
the FxPort is capable of receiving from its attached
NxPort.
|
| fcFxPortCapRxDataFieldSizeMin |
.1.3.6.1.2.1.75.1.5.1.1.6 |
|
The minimum size in bytes of the Data Field in a frame that
the FxPort is capable of receiving from its attached
NxPort.
|
| fcFxPortCapCos |
.1.3.6.1.2.1.75.1.5.1.1.7 |
|
A value indicating the set of Classes of Service that the
FxPort is capable of supporting.
|
| fcFxPortCapIntermix |
.1.3.6.1.2.1.75.1.5.1.1.8 |
|
A flag indicating whether or not the FxPort is capable of
supporting the intermixing of Class 2 and Class 3 frames
during a Class 1 connection. This flag is only valid if the
port is capable of supporting Class 1 service.
|
| fcFxPortCapStackedConnMode |
.1.3.6.1.2.1.75.1.5.1.1.9 |
|
A value indicating the mode of Stacked Connect request that
the FxPort is capable of supporting.
|
| fcFxPortCapClass2SeqDeliv |
.1.3.6.1.2.1.75.1.5.1.1.10 |
|
A flag indicating whether or not the FxPort is capable of
supporting Class 2 Sequential Delivery.
|
| fcFxPortCapClass3SeqDeliv |
.1.3.6.1.2.1.75.1.5.1.1.11 |
|
A flag indicating whether or not the FxPort is capable of
supporting Class 3 Sequential Delivery.
|
| fcFxPortCapHoldTimeMax |
.1.3.6.1.2.1.75.1.5.1.1.12 |
|
The maximum holding time (in microseconds) that the FxPort
is capable of supporting.
|
| fcFxPortCapHoldTimeMin |
.1.3.6.1.2.1.75.1.5.1.1.13 |
|
The minimum holding time (in microseconds) that the FxPort
is capable of supporting.
|
