| ibmappnNodeCpName |
.1.3.6.1.4.1.2.6.2.13.1.1.1 |
|
Administratively-assigned network name
for this node in the format NETID.CPNAME.
|
| ibmappnNodeNetid |
.1.3.6.1.4.1.2.6.2.13.1.1.2 |
|
Administratively-assigned APPN network identification,
which can be from one to eight characters.
This ID is used with the control point name
to create a fully-qualified control point name.
|
| ibmappnNodeBlockNum |
.1.3.6.1.4.1.2.6.2.13.1.1.3 |
|
The block number is the first three digits of the node_id.
These 3 hexadecimal digits identify the product and are not
configurable.
|
| ibmappnNodeIdNum |
.1.3.6.1.4.1.2.6.2.13.1.1.4 |
|
The ID number is the last 5 digits of the node_id.
These 5 hexadecimal digits are administratively defined and
combined with the 3 digit block number form the node_id.
This node_id is used to identify the local node and is
include in APPN alerts as well as being included in XIDs.
A unique value is required for connections to SNA
sub-area.
|
| ibmappnNodeType |
.1.3.6.1.4.1.2.6.2.13.1.1.5 |
|
Type of APPN node, either network, len, or end node.
|
| ibmappnNodeUpTime |
.1.3.6.1.4.1.2.6.2.13.1.1.6 |
|
Time (in hundredths of a second) since this APPN node
was initialized.
|
| ibmappnNodeNegotLs |
.1.3.6.1.4.1.2.6.2.13.1.1.7 |
|
Indicates whether this node supports negotiable
link stations.
|
| ibmappnNodeSegReasm |
.1.3.6.1.4.1.2.6.2.13.1.1.8 |
|
Indicates whether this node supports segment
reassembly. This is only supported when
segment generation is also supported.
|
| ibmappnNodeBindReasm |
.1.3.6.1.4.1.2.6.2.13.1.1.9 |
|
Indicates whether this node supports Bind segment
reassembly. This will only be supported when Bind
segment generation is also supported.
|
| ibmappnNodeParallelTg |
.1.3.6.1.4.1.2.6.2.13.1.1.10 |
|
Indicates whether this node supports parallel TGs.
|
| ibmappnNodeService |
.1.3.6.1.4.1.2.6.2.13.1.1.11 |
|
Indicates whether this node allows call-in from nodes not
defined locally.
|
| ibmappnNodeAdaptiveBindPacing |
.1.3.6.1.4.1.2.6.2.13.1.1.12 |
|
Indicates whether this node supports adaptive bind pacing.
|
| ibmappnNodeNnRcvRegChar |
.1.3.6.1.4.1.2.6.2.13.1.2.1 |
|
Indicates whether this node supports receiving registered
characteristics.
|
| ibmappnNodeNnGateway |
.1.3.6.1.4.1.2.6.2.13.1.2.2 |
|
Indicates whether this is a gateway node.
|
| ibmappnNodeNnCentralDirectory |
.1.3.6.1.4.1.2.6.2.13.1.2.3 |
|
Indicates whether this node supports central directory
cache.
|
| ibmappnNodeNnTreeCache |
.1.3.6.1.4.1.2.6.2.13.1.2.4 |
|
Indicates whether this node supports route tree cache.
|
| ibmappnNodeNnTreeUpdate |
.1.3.6.1.4.1.2.6.2.13.1.2.5 |
|
Indicates whether this node supports
incremental_tree_update, which is only
supported when tree caching is supported.
|
| ibmappnNodeNnRouteAddResist |
.1.3.6.1.4.1.2.6.2.13.1.2.6 |
|
Route addition resistance is a value that
indicates the relative desirability
of using this node for intermediate session traffic.
The value, which can be any integer 0-255,
is used in route computation. The lower the value,
the more desirable the node is for intermediate routing.
|
| ibmappnNodeNnIsr |
.1.3.6.1.4.1.2.6.2.13.1.2.7 |
|
Indicates whether the node supports intermediate
session routing.
|
| ibmappnNodeNnFrsn |
.1.3.6.1.4.1.2.6.2.13.1.2.8 |
|
Flow reduction sequence numbers (FRSNs) are associated
with Topology Database Updates (TDUs) and are unique
only within each APPN network node. A TDU can be
associated with multiple APPN resources. This object
is the last FRSN sent in a topology update to
adjacent network nodes.
|
| ibmappnNodeEnSegGen |
.1.3.6.1.4.1.2.6.2.13.1.3.1 |
|
Indicates whether this end node supports segment generation.
|
| ibmappnNodeEnModeCosMap |
.1.3.6.1.4.1.2.6.2.13.1.3.2 |
|
Indicates whether this end node supports
mode name to COS name mapping.
|
| ibmappnNodeEnLocateCdinit |
.1.3.6.1.4.1.2.6.2.13.1.3.3 |
|
Indicates whether this end node supports Locate Cdinit.
|
| ibmappnNodeEnSendRegNames |
.1.3.6.1.4.1.2.6.2.13.1.3.4 |
|
Indicates whether the node will register its LUs with the
adjacent serving network node:
NO - do not register names
YES - register names
|
| ibmappnNodeEnSendRegChar |
.1.3.6.1.4.1.2.6.2.13.1.3.5 |
|
Indicates whether this node supports
send register characteristics, which is only
supported when send registered names is also
supported.
|
| ibmappnNodePortEntry |
.1.3.6.1.4.1.2.6.2.13.1.4.1.1 |
|
The Port Name is used as the index to this table.
|
| ibmappnNodePortIpEntry |
.1.3.6.1.4.1.2.6.2.13.1.4.2.1 |
|
The IP Name is used as the index to this table.
|
| ibmappnNodePortDlsEntry |
.1.3.6.1.4.1.2.6.2.13.1.4.3.1 |
|
The DLS Name is used as the index to this table.
|
| ibmappnNodePortTrEntry |
.1.3.6.1.4.1.2.6.2.13.1.4.4.1 |
|
The TR Name is used as the index to this table.
|
| ibmappnNodePortDlcTraceEntry |
.1.3.6.1.4.1.2.6.2.13.1.4.5.1 |
|
The Port name and a dynamic integer are the index to
this table.
|
| ibmappnNodeLsEntry |
.1.3.6.1.4.1.2.6.2.13.1.5.1.1 |
|
This table is indexed by the link station name.
|
| ibmappnNodeLsIpEntry |
.1.3.6.1.4.1.2.6.2.13.1.5.2.1 |
|
The IP Name is used as the index to this table.
|
| ibmappnNodeLsDlsEntry |
.1.3.6.1.4.1.2.6.2.13.1.5.3.1 |
|
The DLS Name is used as the index to this table.
|
| ibmappnNodeLsTrEntry |
.1.3.6.1.4.1.2.6.2.13.1.5.4.1 |
|
The TR Name is used as the index to this table.
|
| ibmappnNodeLsStatusEntry |
.1.3.6.1.4.1.2.6.2.13.1.5.5.1 |
|
This table is indexed by the LsStatusIndex, which is an
integer that is continuously updated until it eventually
wraps. This provides the management station the ability
to retrieve only the updates to the table by using the
standard GET NEXT.
|
| ibmappnSnmpInPkts |
.1.3.6.1.4.1.2.6.2.13.1.6.1 |
|
Total number of messages delivered to the APPN SNMP sub-agent.
|
| ibmappnSnmpInGetRequests |
.1.3.6.1.4.1.2.6.2.13.1.6.2 |
|
Total number of GET requests delivered to the APPN SNMP
sub-agent.
|
| ibmappnSnmpInGetNexts |
.1.3.6.1.4.1.2.6.2.13.1.6.3 |
|
Total number of GETNEXT requests delivered to the APPN SNMP
sub-agent.
|
| ibmappnSnmpInSetRequests |
.1.3.6.1.4.1.2.6.2.13.1.6.4 |
|
Total number of SET requests delivered to the APPN SNMP
sub-agent.
|
| ibmappnSnmpInTotalVars |
.1.3.6.1.4.1.2.6.2.13.1.6.5 |
|
Total number of VARIABLES included in both
GET and GETNEXT requests to the APPN SNMP sub-agent.
|
| ibmappnSnmpInGetVars |
.1.3.6.1.4.1.2.6.2.13.1.6.6 |
|
Total number of VARIBLES included in all
GET requests to the APPN SNMP sub-agent.
|
| ibmappnSnmpInGetNextVars |
.1.3.6.1.4.1.2.6.2.13.1.6.7 |
|
Total number of VARIABLES included in all
GETNEXT requests to the APPN SNMP sub-agent.
|
| ibmappnSnmpInSetVars |
.1.3.6.1.4.1.2.6.2.13.1.6.8 |
|
Total number of VARIBLES included in all
SET requests to the APPN SNMP sub-agent.
|
| ibmappnSnmpOutNoSuchNames |
.1.3.6.1.4.1.2.6.2.13.1.6.9 |
|
Total number of VARIABLES that could not
be found by the APPN SNMP sub-agent.
|
| ibmappnSnmpOutGenErrs |
.1.3.6.1.4.1.2.6.2.13.1.6.10 |
|
Total number of undefined errors that
occurred processing SNMP request to the
APPN SNMP sub-agent.
|
| ibmappnMemorySize |
.1.3.6.1.4.1.2.6.2.13.1.7.1 |
|
Size of the shared storage segment, as obtained
by storage management from the underlying operating
system.
|
| ibmappnMemoryUsed |
.1.3.6.1.4.1.2.6.2.13.1.7.2 |
|
Number of bytes in the segment that are currently
allocated to process.
|
| ibmappnMemoryWarnThresh |
.1.3.6.1.4.1.2.6.2.13.1.7.3 |
|
Allocation threshold beyond which storage
management considers the storage resources
to be constrained.
|
| ibmappnMemoryCritThresh |
.1.3.6.1.4.1.2.6.2.13.1.7.4 |
|
Allocation threshold beyond which storage
management considers the storage resources
to be critically constrained.
|
| ibmappnNodeDefLsGoodXids |
.1.3.6.1.4.1.2.6.2.13.1.8.1 |
|
The current number of successfull XIDs that have occurred
on all defined link stations since the last time this
node was initialized.
|
| ibmappnNodeDefLsBadXids |
.1.3.6.1.4.1.2.6.2.13.1.8.2 |
|
The current number of unsuccessfull XIDs that have
occurred on all defined link stations since the last
time this node was initialized.
|
| ibmappnNodeDynLsGoodXids |
.1.3.6.1.4.1.2.6.2.13.1.8.3 |
|
The current number of successfull XIDs that have
occurred on all dynamic link stations since the last
time this node was initialized.
|
| ibmappnNodeDynLsBadXids |
.1.3.6.1.4.1.2.6.2.13.1.8.4 |
|
The current number of unsuccessfull XIDs that have
occurred on all dynamic link stations since the last
time this node was initialized.
|
| ibmappnNnTopoMaxNodes |
.1.3.6.1.4.1.2.6.2.13.2.1.1 |
|
Maximum number of nodes allowed in the APPN topology
database. This administratively assigned value must be
equal to or greater than the maximum total number of end
nodes and network nodes.
If the number of nodes exceeds this value, APPN will issue
an Alert and the node can no longer participate as a network
node.
|
| ibmappnNnTopoCurNumNodes |
.1.3.6.1.4.1.2.6.2.13.2.1.2 |
|
Current number of nodes in this node's topology database.
If this value exceeds the maximum number of nodes allowed
(NnTopoMaxNodes), APPN alert CPDB002 is
issued.
|
| ibmappnNnTopoInTdus |
.1.3.6.1.4.1.2.6.2.13.2.1.3 |
|
Total number of TDUs received from
all adjacent NN since last initialization.
|
| ibmappnNnTopoOutTdus |
.1.3.6.1.4.1.2.6.2.13.2.1.4 |
|
Total number of TDUs built by this node to be sent to
all adjacent NN since last initialization.
|
| ibmappnNnTopoNodeLowRsns |
.1.3.6.1.4.1.2.6.2.13.2.1.5 |
|
Total number of topology node updates received by this
node with a RSN less than the current RSN. Both even and
odd RSN are included in this count.
These TDUs are not errors, but result when TDUs are
broadcast to all adjacent network nodes. No update to
this node's topology database occurs, but this node will
send a TDU with it's higher RSN to the adjacent node that
sent this low RSN.
|
| ibmappnNnTopoNodeEqualRsns |
.1.3.6.1.4.1.2.6.2.13.2.1.6 |
|
Total number of topology node updates received by this
node with a RSN equal to the current RSN. Both even and
odd RSN are included in this count.
These TDUs are not errors, but result when TDUs are
broadcast to all adjacent network nodes. No update to
this node's topology database occurs.
|
| ibmappnNnTopoNodeGoodHighRsns |
.1.3.6.1.4.1.2.6.2.13.2.1.7 |
|
Total number of topology node updates received by this
node with a RSN greater than the current RSN.
This results in updating this nodes topology and
broadcasting a TDU to all adjacent network nodes. It is
not required to send a TDU to the sender of this update
because that node already has the update.
|
| ibmappnNnTopoNodeBadHighRsns |
.1.3.6.1.4.1.2.6.2.13.2.1.8 |
|
Total number of topology node updates received by this
node with an odd RSN greater than the current RSN.
These updates represent a topology inconsistency detected
by one of the APPN network nodes.
This results in updating this nodes topology and broadcasting
a TDU to all adjacent network nodes.
|
| ibmappnNnTopoNodeStateUpdates |
.1.3.6.1.4.1.2.6.2.13.2.1.9 |
|
Total number of topology Node records built as a result
of internally detected node state changes that affect APPN
topology and routing. Updates are sent via TDUs to all
adjacent network nodes.
|
| ibmappnNnTopoNodeErrors |
.1.3.6.1.4.1.2.6.2.13.2.1.10 |
|
Total number of topology node records inconsistencies
detected by this node. This occurs when this node attempts
to update its topology database and detects a data
inconsistency. This node will create a TDU with the
current RSN incremented to the next odd number and
broadcast it to all adjacent NNs.
|
| ibmappnNnTopoNodeTimerUpdates |
.1.3.6.1.4.1.2.6.2.13.2.1.11 |
|
Total number of topology node records built for this
node's resource due to timer updates. Updates are sent via
TDUs to all adjacent network nodes. These updates insure
other network nodes do not delete this node's resources
from their topology database.
|
| ibmappnNnTopoNodePurges |
.1.3.6.1.4.1.2.6.2.13.2.1.12 |
|
Total number of topology node records purged from this
node's topology database. This occurs when a node has not
been updated in a specified amount of time. The owning
node is responsible for broadcasting updates for its
resource that it wants kept in the network topology.
|
| ibmappnNnTopoTgLowRsns |
.1.3.6.1.4.1.2.6.2.13.2.1.13 |
|
Total number of topology TG updates received by this
node with a RSN less than the current RSN. Both even and
odd RSN are included in this count.
These TDUs are not errors, but result when TDUs are
broadcast to all adjacent network nodes. No update to
this node's topology database occurs, but this node will
send a TDU with it's higher RSN to the sender of the low
RSN.
|
| ibmappnNnTopoTgEqualRsns |
.1.3.6.1.4.1.2.6.2.13.2.1.14 |
|
Total number of topology TG updates received by this
node with a RSN equal to the current RSN. Both even and
odd RSN are included in this count.
These TDUs are not errors, but result when TDUs are
broadcast to all adjacent network nodes. No update to
this node's topology database occurs.
|
| ibmappnNnTopoTgGoodHighRsns |
.1.3.6.1.4.1.2.6.2.13.2.1.15 |
|
Total number of topology TG updates received by this
node with a RSN greater than the current RSN.
This results in updating this nodes topology and
broadcasting the update to all adjacent network nodes.
|
| ibmappnNnTopoTgBadHighRsns |
.1.3.6.1.4.1.2.6.2.13.2.1.16 |
|
Total number of topology TG updates received by this
node with an odd RSN greater than the current RSN.
These updates represent a topology inconsistency detected
by one of the APPN network nodes.
This results in updating this nodes topology and
broadcasting a TDU to all adjacent network nodes.
|
| ibmappnNnTopoTgStateUpdates |
.1.3.6.1.4.1.2.6.2.13.2.1.17 |
|
Total number of topology TG records built as a result
of internally detected node state changes that affect APPN
topology and routing. Updates are sent via TDUs to all
adjacent network nodes.
|
| ibmappnNnTopoTgErrors |
.1.3.6.1.4.1.2.6.2.13.2.1.18 |
|
Total number of topology TG records inconsistencies
detected by this node. This occurs when this node
attempts to update its topology database and detects a
data inconsistency. This node will create a TDU with
the current RSN incremented to the next odd number and
broadcast it to all adjacent NNs.
|
| ibmappnNnTopoTgTimerUpdates |
.1.3.6.1.4.1.2.6.2.13.2.1.19 |
|
Total number of topology TG records built for this
node's resource due to timer updates. Updates are sent via
TDUs to all adjacent network nodes. These updates insure
other network nodes do not delete this node's resources
from their topology database.
|
| ibmappnNnTopoTgPurges |
.1.3.6.1.4.1.2.6.2.13.2.1.20 |
|
Total number of topology TG records purged from this
node's topology database. This occurs when a TG has not
been updated in a specified amount of time. The owning
node is responsible for broadcasting updates for its
resource that it wants to keep in the network topology.
|
| ibmappnNnTopoTotalRouteCalcs |
.1.3.6.1.4.1.2.6.2.13.2.1.21 |
|
Number of routes calculated for all class of services
since the last initialization.
|
| ibmappnNnTopoTotalRouteRejs |
.1.3.6.1.4.1.2.6.2.13.2.1.22 |
|
Number of route requests for all class of services that
could not be calculated since last initialization.
|
| ibmappnNnTopoRouteEntry |
.1.3.6.1.4.1.2.6.2.13.2.1.23.1 |
|
The Class of Service name is the index for this table.
|
| ibmappnNnAdjNodeEntry |
.1.3.6.1.4.1.2.6.2.13.2.2.1 |
|
The adjacent node name is the index for this table.
|
| ibmappnNnTopologyEntry |
.1.3.6.1.4.1.2.6.2.13.2.3.1.1 |
|
The fully-qualified node name is used to
index this table.
|
| ibmappnNnTgTopologyEntry |
.1.3.6.1.4.1.2.6.2.13.2.3.2.1 |
|
This table requires three indexes to provide a
unique index. The indexes are the owning or originating
CPname, the destination CPname, and the TG number.
|
| ibmappnNnTopologyFREntry |
.1.3.6.1.4.1.2.6.2.13.2.3.3.1 |
|
This table is indexed by two columns:
FRSN, followed by fully-qualified node name.
|
| ibmappnNnTgTopologyFREntry |
.1.3.6.1.4.1.2.6.2.13.2.3.4.1 |
|
This table is indexed by four columns:
FRSN, TG owner fully-qualified node name,
TG destination fully-qualified node name, and TG number.
|
| ibmappnLocalNodeName |
.1.3.6.1.4.1.2.6.2.13.3.1.1.1 |
|
Administratively-assigned fully-qualified name
for this node. Format is NETID.CPNAME.
|
| ibmappnLocalNodeType |
.1.3.6.1.4.1.2.6.2.13.3.1.1.2 |
|
Type of APPN node.
|
| ibmappnLocalNnRsn |
.1.3.6.1.4.1.2.6.2.13.3.1.2.1 |
|
Resource sequence number is assigned and
controlled by the network node that owns this
resource. This is always an even unsigned
number unless an error has occurred.
|
| ibmappnLocalNnRouteAddResist |
.1.3.6.1.4.1.2.6.2.13.3.1.2.2 |
|
Route addition resistance
indicates the relative desirability
of using this node for intermediate session traffic.
The value, which can be any integer 0-255,
is used in route computation. The lower the value,
the more desirable the node is for intermediate routing.
|
| ibmappnLocalNnCongested |
.1.3.6.1.4.1.2.6.2.13.3.1.2.3 |
|
Indicates whether this node is congested.
Other network nodes stop routing traffic to
this node while this flag is on.
|
| ibmappnLocalNnIsrDepleted |
.1.3.6.1.4.1.2.6.2.13.3.1.2.4 |
|
Indicate whether intermediated session
routing resources are depleted.
Other network nodes stop routing traffic through
this node while this flag is on.
|
| ibmappnLocalNnEndptDepleted |
.1.3.6.1.4.1.2.6.2.13.3.1.2.5 |
|
Indicates whether session endpoint resources
are depleted.
|
| ibmappnLocalNnQuiescing |
.1.3.6.1.4.1.2.6.2.13.3.1.2.6 |
|
Indicates whether the node is quiescing.
|
| ibmappnLocalNnGateway |
.1.3.6.1.4.1.2.6.2.13.3.1.2.7 |
|
Indicates whether the node is a gateway.
|
| ibmappnLocalNnCentralDirectory |
.1.3.6.1.4.1.2.6.2.13.3.1.2.8 |
|
Indicates whether the node is a central directory.
|
| ibmappnLocalNnIsr |
.1.3.6.1.4.1.2.6.2.13.3.1.2.9 |
|
Indicates whether the node supports intermediate
session routing.
|
| ibmappnLocalNnChainSupport |
.1.3.6.1.4.1.2.6.2.13.3.1.2.10 |
|
Indicates whether the node supports chaining.
|
| ibmappnLocalNnFrsn |
.1.3.6.1.4.1.2.6.2.13.3.1.2.11 |
|
Flow reduction sequence numbers (FRSNs) are associated
with Topology Database Updates (TDUs) and are unique
only within each APPN network node. A TDU can be
associated with multiple APPN resources. This object
is the last FRSN sent in a topology update to
adjacent network nodes.
|
| ibmappnLocalTgEntry |
.1.3.6.1.4.1.2.6.2.13.3.1.3.1.1 |
|
This table is indexed by the destination CPname
and the TG number.
|
| ibmappnLocalEnEntry |
.1.3.6.1.4.1.2.6.2.13.3.2.1.1 |
|
This table is indexed by the end node CPname.
|
| ibmappnLocalEnTgEntry |
.1.3.6.1.4.1.2.6.2.13.3.2.2.1 |
|
This table requires multiple indexes to uniquely
identify each TG. They are originating CPname,
destination CPname, and the TG number.
|
| ibmappnDirMaxCaches |
.1.3.6.1.4.1.2.6.2.13.5.1.1 |
|
Maximum number of cache entries allowed. This
is an administratively assigned value.
|
| ibmappnDirCurCaches |
.1.3.6.1.4.1.2.6.2.13.5.1.2 |
|
Current number of cache entries.
|
| ibmappnDirCurHomeEntries |
.1.3.6.1.4.1.2.6.2.13.5.1.3 |
|
Current number of home entries.
|
| ibmappnDirRegEntries |
.1.3.6.1.4.1.2.6.2.13.5.1.4 |
|
Current number of registered entries.
|
| ibmappnDirInLocates |
.1.3.6.1.4.1.2.6.2.13.5.1.5 |
|
Number of directed locates received.
|
| ibmappnDirInBcastLocates |
.1.3.6.1.4.1.2.6.2.13.5.1.6 |
|
Number of broadcast locates received.
|
| ibmappnDirOutLocates |
.1.3.6.1.4.1.2.6.2.13.5.1.7 |
|
Number of directed locates sent.
|
| ibmappnDirOutBcastLocates |
.1.3.6.1.4.1.2.6.2.13.5.1.8 |
|
Number of broadcast locates sent.
|
| ibmappnDirNotFoundLocates |
.1.3.6.1.4.1.2.6.2.13.5.1.9 |
|
Number of directed locates returned with a 'not found'.
|
| ibmappnDirNotFoundBcastLocates |
.1.3.6.1.4.1.2.6.2.13.5.1.10 |
|
Number of broadcast locates returned with
a not found.
|
| ibmappnDirLocateOutstands |
.1.3.6.1.4.1.2.6.2.13.5.1.11 |
|
Current number of outstanding locates,
both directed and broadcast. This value
varies. A value of zero indicates
that no locates are unanswered.
|
| ibmappnDirEntry |
.1.3.6.1.4.1.2.6.2.13.5.2.1 |
|
This table is indexed by the LU name.
|
| ibmappnCosModeEntry |
.1.3.6.1.4.1.2.6.2.13.6.1.1 |
|
This table is indexed by the Mode Name.
|
| ibmappnCosNameEntry |
.1.3.6.1.4.1.2.6.2.13.6.2.1 |
|
The COS name is the index to this table.
|
| ibmappnCosNodeRowEntry |
.1.3.6.1.4.1.2.6.2.13.6.3.1 |
|
The COS name is the first index and a integer
is the second index to insure a unique index.
|
| ibmappnCosTgRowEntry |
.1.3.6.1.4.1.2.6.2.13.6.4.1 |
|
The TgRowName and the TgRowIndex are the index
for this table.
|
| ibmappnNodePortName |
.1.3.6.1.4.1.2.6.2.13.1.4.1.1.1 |
|
Administratively-assigned name for this APPN port.
The name can be from one to eight characters.
|
| ibmappnNodePortState |
.1.3.6.1.4.1.2.6.2.13.1.4.1.1.2 |
|
Indicates the current state of this port.
|
| ibmappnNodePortDlcType |
.1.3.6.1.4.1.2.6.2.13.1.4.1.1.3 |
|
The type of DLC interface, distinguished according
to the protocol immediately 'below' this layer.
|
| ibmappnNodePortPortType |
.1.3.6.1.4.1.2.6.2.13.1.4.1.1.4 |
|
Identifies the type of line used by this port.
|
| ibmappnNodePortSIMRIM |
.1.3.6.1.4.1.2.6.2.13.1.4.1.1.5 |
|
Indicates whether Set Initialization Mode (SIM) and
Receive Initialization Mode (RIM) are supported.
|
| ibmappnNodePortLsRole |
.1.3.6.1.4.1.2.6.2.13.1.4.1.1.6 |
|
Initial role for LSs activated through this port,
where 'abm' indicates asynchronous balance mode.
|
| ibmappnNodePortMaxRcvBtuSize |
.1.3.6.1.4.1.2.6.2.13.1.4.1.1.7 |
|
Maximum Basic Transmission Size (BTU) that a
link station on this port can receive.
|
| ibmappnNodePortMaxIframeWindow |
.1.3.6.1.4.1.2.6.2.13.1.4.1.1.8 |
|
Maximum number of I-frames that can be received
by the XID sender before an acknowledgement is received.
|
| ibmappnNodePortDefLsGoodXids |
.1.3.6.1.4.1.2.6.2.13.1.4.1.1.9 |
|
The total number of successfull XIDs that have occurred
on all defined link stations on this port since the last
time this port was started.
|
| ibmappnNodePortDefLsBadXids |
.1.3.6.1.4.1.2.6.2.13.1.4.1.1.10 |
|
The total number of unsuccessfull XIDs that have occurred
on all defined link stations on this port since the last
time this port was started.
|
| ibmappnNodePortDynLsGoodXids |
.1.3.6.1.4.1.2.6.2.13.1.4.1.1.11 |
|
The total number of successfull XIDs that have occurred
on all dynamic link stations on this port since the last
time this port was started.
|
| ibmappnNodePortDynLsBadXids |
.1.3.6.1.4.1.2.6.2.13.1.4.1.1.12 |
|
The total number of unsuccessfull XIDs that have occurred
on all dynamic link stations on this port since the last
time this port was started.
|
| ibmappnNodePortSpecific |
.1.3.6.1.4.1.2.6.2.13.1.4.1.1.13 |
|
Identifies the port specific OBJECT IDENTIFIER
that can provide additional information.
|
| ibmappnNodePortIpName |
.1.3.6.1.4.1.2.6.2.13.1.4.2.1.1 |
|
Administratively-assigned name for this APPN port.
The name can be from one to eight characters.
|
| ibmappnNodePortIpPortNum |
.1.3.6.1.4.1.2.6.2.13.1.4.2.1.2 |
|
Local TCP/IP port number.
|
| ibmappnNodePortDlsName |
.1.3.6.1.4.1.2.6.2.13.1.4.3.1.1 |
|
Administratively-assigned name for this APPN DLS port.
The name can be from one to eight characters.
|
| ibmappnNodePortDlsMac |
.1.3.6.1.4.1.2.6.2.13.1.4.3.1.2 |
|
Local DLS MAC address.
|
| ibmappnNodePortDlsSap |
.1.3.6.1.4.1.2.6.2.13.1.4.3.1.3 |
|
Local DLS Sap address.
|
| ibmappnNodePortTrName |
.1.3.6.1.4.1.2.6.2.13.1.4.4.1.1 |
|
Administratively-assigned name for this APPN port.
The name can be from one to eight characters.
|
| ibmappnNodePortTrMac |
.1.3.6.1.4.1.2.6.2.13.1.4.4.1.2 |
|
Local Token Ring MAC address.
|
| ibmappnNodePortTrSap |
.1.3.6.1.4.1.2.6.2.13.1.4.4.1.3 |
|
Local Token Ring Sap address.
|
| ibmappnNodePortDlcTracPortName |
.1.3.6.1.4.1.2.6.2.13.1.4.5.1.1 |
|
The Port name associated with this this trace table entry.
|
| ibmappnNodePortDlcTracIndex |
.1.3.6.1.4.1.2.6.2.13.1.4.5.1.2 |
|
This index value is updated every time a new trace entry
is created which provides a means to retrieve only the
updated entries and also provides a simple method of
correlating the entries. The table will wrap when the
table is full, which will result in previous entries
being written over. The mangement station can over
come this by retrieving the table using this index to
retrieve only the new table entries.
|
| ibmappnNodePortDlcTracDlcType |
.1.3.6.1.4.1.2.6.2.13.1.4.5.1.3 |
|
The type of DLC interface, distinguished according
to the protocol immediately 'below' this layer.
|
| ibmappnNodePortDlcTracLocalAddr |
.1.3.6.1.4.1.2.6.2.13.1.4.5.1.4 |
|
Local address in format described below:
other = free form DisplayString
ip = ld. ld. ld. ld / 2d
tr = lx: lx: lx: lx: lx: lx . lx
dlsw = lx: lx: lx: lx: lx: lx . lx
ethernet = lx: lx: lx: lx: lx: lx . lx
|
| ibmappnNodePortDlcTracRemoteAddr |
.1.3.6.1.4.1.2.6.2.13.1.4.5.1.5 |
|
Remote Address in the format described below:
other = free form DisplayString
ip = ld. ld. ld. ld / 2d
tr = lx: lx: lx: lx: lx: lx . lx
dlsw = lx: lx: lx: lx: lx: lx . lx
ethernet = lx: lx: lx: lx: lx: lx . lx
|
| ibmappnNodePortDlcTracMsgType |
.1.3.6.1.4.1.2.6.2.13.1.4.5.1.6 |
|
Indicates the type of trace record entry
|
| ibmappnNodePortDlcTracCmdType |
.1.3.6.1.4.1.2.6.2.13.1.4.5.1.7 |
|
Indicates the command type of the trace entry.
|
| ibmappnNodePortDlcTracUseWan |
.1.3.6.1.4.1.2.6.2.13.1.4.5.1.8 |
|
Indicates the type of connection of the trace entry.
For example, token ring and ethernet ports will have
useLan as connection. For the dls port, it could be
either useWan if connection is across Wan via dls
sessions, or useLan if connection is to a local attached
LAN.
|
| ibmappnNodeLsName |
.1.3.6.1.4.1.2.6.2.13.1.5.1.1.1 |
|
Administratively-assigned name for the link station.
The name can be from one to eight characters.
|
| ibmappnNodeLsPortName |
.1.3.6.1.4.1.2.6.2.13.1.5.1.1.2 |
|
Administratively-assigned name for the port.
The name can be from one to eight characters.
|
| ibmappnNodeLsDlcType |
.1.3.6.1.4.1.2.6.2.13.1.5.1.1.3 |
|
The type of DLC interface, distinguished according
to the protocol immediately 'below' this layer.
|
| ibmappnNodeLsDynamic |
.1.3.6.1.4.1.2.6.2.13.1.5.1.1.4 |
|
Identifies whether this resource is a dynamic link station.
Dynamic link stations are created when adjacent nodes
that have not been locally defined establish a connection
with this node.
|
| ibmappnNodeLsState |
.1.3.6.1.4.1.2.6.2.13.1.5.1.1.5 |
|
State of this link station.
|
| ibmappnNodeLsCpName |
.1.3.6.1.4.1.2.6.2.13.1.5.1.1.6 |
|
Fully-qualified name of the adjacent node for this link
station. The name can be from three to seventeen
characters. Format is netid.cpname.
|
| ibmappnNodeLsTgNum |
.1.3.6.1.4.1.2.6.2.13.1.5.1.1.7 |
|
Number associated with the TG to this link station.
|
| ibmappnNodeLsLimResource |
.1.3.6.1.4.1.2.6.2.13.1.5.1.1.8 |
|
Indicates whether the link station is
a limited resource. If it is, the TG
is deactivated when there are no sessions.
|
| ibmappnNodeLsMigration |
.1.3.6.1.4.1.2.6.2.13.1.5.1.1.9 |
|
Indicates whether this link station will be used
for connections to down-level or migration partners.
|
| ibmappnNodeLsBlockNum |
.1.3.6.1.4.1.2.6.2.13.1.5.1.1.10 |
|
The block number is the first three digits of the node_id.
These 3 hexideimal digits identify the product and are not
configurable.
|
| ibmappnNodeLsIdNum |
.1.3.6.1.4.1.2.6.2.13.1.5.1.1.11 |
|
The ID number is the last 5 digits of the node_id.
These 5 hexadecimal digits are administratively defined and
combined with the 3 digit block number form the node_id.
This node_id is used to identify the local node and is
include in APPN alerts as well as being included in XIDs.
A unique value is required for connections to SNA
sub-area.
|
| ibmappnNodeLsCpCpSession |
.1.3.6.1.4.1.2.6.2.13.1.5.1.1.12 |
|
Indicates whether CP-CP sessions are
supported by this link station.
|
| ibmappnNodeLsTargetPacingCount |
.1.3.6.1.4.1.2.6.2.13.1.5.1.1.13 |
|
Numeric value between 0 and 32767 inclusive indicating
the desired pacing window size for BINDs on this TG.
The number is significant only when fixed bind pacing
is being performed.
|
| ibmappnNodeLsMaxSendBtuSize |
.1.3.6.1.4.1.2.6.2.13.1.5.1.1.14 |
|
Numeric value between 0 and 32767 inclusive indicating
the desired number of bytes in a Basic Transmission Unit
(BTU) that can be sent on this TG.
This is an administratively assigned value.
|
| ibmappnNodeLsEffCap |
.1.3.6.1.4.1.2.6.2.13.1.5.1.1.15 |
|
The effective capacity is an integer value that indicates
the kilo bits per second.
It is derived from the link bandwidth and maximum load
factor with the range of 0 thru 603,979,776.
This is an administratively assigned value associated
with the TG using this link station.
|
| ibmappnNodeLsConnCost |
.1.3.6.1.4.1.2.6.2.13.1.5.1.1.16 |
|
Cost per connect time: a value representing
the relative cost per unit of time to use
the TG. Range is from 0, which means no cost,
to 255, which indicates maximum cost.
This is an administratively assigned value associated
with the TG using this link station.
|
| ibmappnNodeLsByteCost |
.1.3.6.1.4.1.2.6.2.13.1.5.1.1.17 |
|
Relative cost of transmitting a byte over this link.
Range is from 0 (lowest cost) to 255.
This is an administratively assigned value associated
with the TG using this link station.
|
| ibmappnNodeLsSecurity |
.1.3.6.1.4.1.2.6.2.13.1.5.1.1.18 |
|
The security is represented as an integer with a range of
1 thru 255 with the most common values enumerated as
defined above.
This is an administratively assigned value associated
with the TG using this link station.
|
| ibmappnNodeLsDelay |
.1.3.6.1.4.1.2.6.2.13.1.5.1.1.19 |
|
Relative amount of time that it takes for a signal to
travel the length of the logical link. This time is
represented in micro seconds, with some of the more
common values enumerated.
This is an administratively assigned value associated
with the TG using this link station.
|
| ibmappnNodeLsUsr1 |
.1.3.6.1.4.1.2.6.2.13.1.5.1.1.20 |
|
First user-defined TG characteristic for this TG with
a range of 0-255.
This is an administratively assigned value associated
with the TG using this link station.
|
| ibmappnNodeLsUsr2 |
.1.3.6.1.4.1.2.6.2.13.1.5.1.1.21 |
|
Second user-defined TG characteristic for this TG with
a range of 0-255.
This is an administratively assigned value associated
with the TG using this link station.
|
| ibmappnNodeLsUsr3 |
.1.3.6.1.4.1.2.6.2.13.1.5.1.1.22 |
|
Third user-defined TG characteristic for this TG with
a range of 0-255.
This is an administratively assigned value associated
with the TG using this link station.
|
| ibmappnNodeLsInXidBytes |
.1.3.6.1.4.1.2.6.2.13.1.5.1.1.23 |
|
Number of XID bytes received.
|
| ibmappnNodeLsInMsgBytes |
.1.3.6.1.4.1.2.6.2.13.1.5.1.1.24 |
|
Number of message (I-frame) bytes received.
|
| ibmappnNodeLsInXidFrames |
.1.3.6.1.4.1.2.6.2.13.1.5.1.1.25 |
|
Number of XID frames received.
|
| ibmappnNodeLsInMsgFrames |
.1.3.6.1.4.1.2.6.2.13.1.5.1.1.26 |
|
Number of message (I-frame) frames received.
|
| ibmappnNodeLsOutXidBytes |
.1.3.6.1.4.1.2.6.2.13.1.5.1.1.27 |
|
Number of XID bytes sent.
|
| ibmappnNodeLsOutMsgBytes |
.1.3.6.1.4.1.2.6.2.13.1.5.1.1.28 |
|
Number of message (I-frame) bytes sent.
|
| ibmappnNodeLsOutXidFrames |
.1.3.6.1.4.1.2.6.2.13.1.5.1.1.29 |
|
Number of XID frames sent.
|
| ibmappnNodeLsOutMsgFrames |
.1.3.6.1.4.1.2.6.2.13.1.5.1.1.30 |
|
Number of message (I-frame) frames sent.
|
| ibmappnNodeLsEchoRsps |
.1.3.6.1.4.1.2.6.2.13.1.5.1.1.31 |
|
Number of responses returned from adjacent link station.
A response should be returned for each test frame sent by
this node.
Test frames are sent to adjacent nodes periodically to
verify connectivity and to measure that actual round trip
time, that is the time the test frame is sent until the
response is received.
|
| ibmappnNodeLsCurrentDelay |
.1.3.6.1.4.1.2.6.2.13.1.5.1.1.32 |
|
The time that it took for the last test signal to be
sent and returned from this link station to the
adjacent links station.
This time is represented in milliseconds.
|
| ibmappnNodeLsMaxDelay |
.1.3.6.1.4.1.2.6.2.13.1.5.1.1.33 |
|
The longest time it took for a test signal
to be sent and returned from this link station to the
adjacent links station.
This time is represented in milliseconds .
|
| ibmappnNodeLsMinDelay |
.1.3.6.1.4.1.2.6.2.13.1.5.1.1.34 |
|
The shortest time it took for a test signal
to be sent and returned from this link station to the
adjacent links station.
This time is represented in milliseconds.
|
| ibmappnNodeLsMaxDelayTime |
.1.3.6.1.4.1.2.6.2.13.1.5.1.1.35 |
|
The time (since system up in hundredth of seconds)
when the longest delay occurred.
This time can be used to identify when this high
water mark occurred in relation to the last initialization
of the APPN node.
|
| ibmappnNodeLsGoodXids |
.1.3.6.1.4.1.2.6.2.13.1.5.1.1.36 |
|
The total number of successful XIDs that have occurred
on this link station since the time it was started.
|
| ibmappnNodeLsBadXids |
.1.3.6.1.4.1.2.6.2.13.1.5.1.1.37 |
|
The total number of unsuccessful XIDs that have occurred
on this link station since the time it was started.
|
| ibmappnNodeLsSpecific |
.1.3.6.1.4.1.2.6.2.13.1.5.1.1.38 |
|
Identifies the DLC specific OBJECT IDENTIFIER
that can provide additional information.
|
| ibmappnNodeLsSubState |
.1.3.6.1.4.1.2.6.2.13.1.5.1.1.39 |
|
State of this link station.
|
| ibmappnNodeLsStartTime |
.1.3.6.1.4.1.2.6.2.13.1.5.1.1.40 |
|
The time (in hundredth of seconds) this link station
has been active the last time since the time APPN was
initialized.
|
| ibmappnNodeLsActiveTime |
.1.3.6.1.4.1.2.6.2.13.1.5.1.1.41 |
|
The time (in hundredth of seconds) this link station
has been in the active state.
A zero value indicates the link station has never been
active.
|
| ibmappnNodeLsCurrentStateTime |
.1.3.6.1.4.1.2.6.2.13.1.5.1.1.42 |
|
The time (in hundredth of seconds) the link station is
in the current state.
|
| ibmappnNodeLsIpName |
.1.3.6.1.4.1.2.6.2.13.1.5.2.1.1 |
|
Administratively-assigned name for this link station. The
name can be from one to eight characters.
|
| ibmappnNodeLsIpState |
.1.3.6.1.4.1.2.6.2.13.1.5.2.1.2 |
|
State of this link station.
|
| ibmappnNodeLsLocalIpAddr |
.1.3.6.1.4.1.2.6.2.13.1.5.2.1.3 |
|
Local IP address.
|
| ibmappnNodeLsLocalIpPortNum |
.1.3.6.1.4.1.2.6.2.13.1.5.2.1.4 |
|
Local TCP/IP port number.
The default listening port will be administratively
assigned and will dynamically change if this node
initiates a session with adjacent node.
|
| ibmappnNodeLsRemoteIpAddr |
.1.3.6.1.4.1.2.6.2.13.1.5.2.1.5 |
|
Remote IP address.
|
| ibmappnNodeLsRemoteIpPortNum |
.1.3.6.1.4.1.2.6.2.13.1.5.2.1.6 |
|
Remote TCP/IP port number.
|
| ibmappnNodeLsDlsName |
.1.3.6.1.4.1.2.6.2.13.1.5.3.1.1 |
|
Administratively-assigned name for this link station.
The name can be from one to eight characters.
|
| ibmappnNodeLsDlsState |
.1.3.6.1.4.1.2.6.2.13.1.5.3.1.2 |
|
State of this link station.
|
| ibmappnNodeLsLocalDlsMac |
.1.3.6.1.4.1.2.6.2.13.1.5.3.1.3 |
|
Local MAC address.
|
| ibmappnNodeLsLocalDlsSap |
.1.3.6.1.4.1.2.6.2.13.1.5.3.1.4 |
|
Local SAP address.
|
| ibmappnNodeLsRemoteDlsMac |
.1.3.6.1.4.1.2.6.2.13.1.5.3.1.5 |
|
Remote MAC address.
|
| ibmappnNodeLsRemoteDlsSap |
.1.3.6.1.4.1.2.6.2.13.1.5.3.1.6 |
|
Remote SAP address.
|
| ibmappnNodeLsTrName |
.1.3.6.1.4.1.2.6.2.13.1.5.4.1.1 |
|
Administratively-assigned name for this link station.
The name can be from one to eight characters.
|
| ibmappnNodeLsTrState |
.1.3.6.1.4.1.2.6.2.13.1.5.4.1.2 |
|
State of this link station.
|
| ibmappnNodeLsLocalTrMac |
.1.3.6.1.4.1.2.6.2.13.1.5.4.1.3 |
|
Local MAC address.
|
| ibmappnNodeLsLocalTrSap |
.1.3.6.1.4.1.2.6.2.13.1.5.4.1.4 |
|
Local SAP address.
|
| ibmappnNodeLsRemoteTrMac |
.1.3.6.1.4.1.2.6.2.13.1.5.4.1.5 |
|
Remote MAC address.
|
| ibmappnNodeLsRemoteTrSap |
.1.3.6.1.4.1.2.6.2.13.1.5.4.1.6 |
|
Remote SAP address.
|
| ibmappnNodeLsStatusIndex |
.1.3.6.1.4.1.2.6.2.13.1.5.5.1.1 |
|
This index is continuous index this table.
|
| ibmappnNodeLsStatusTime |
.1.3.6.1.4.1.2.6.2.13.1.5.5.1.2 |
|
Time (in hundreds of a second) since this node was last
initialized.
|
| ibmappnNodeLsStatusLsName |
.1.3.6.1.4.1.2.6.2.13.1.5.5.1.3 |
|
Administratively-assigned name for this link station.
|
| ibmappnNodeLsStatusCpName |
.1.3.6.1.4.1.2.6.2.13.1.5.5.1.4 |
|
Administratively-assigned fully-qualified name of the
adjacent node partner. This will be provided when the
adjacent node has been defined at this node or when the
XID sequence has proceeded far enough to to identify the
adjacent node. A blank CP name will indicate the name is
unknown.
|
| ibmappnNodeLsStatusNodeId |
.1.3.6.1.4.1.2.6.2.13.1.5.5.1.5 |
|
Adjacent Node id
|
| ibmappnNodeLsStatusTgNum |
.1.3.6.1.4.1.2.6.2.13.1.5.5.1.6 |
|
Number associated with the TG to this link station
with a range from 0 to 256. A value of 256 indicates
the tg number has not been negotiated and is unknown at
this time.
|
| ibmappnNodeLsStatusGeneralSense |
.1.3.6.1.4.1.2.6.2.13.1.5.5.1.7 |
|
The error sense code associated with the start sequence of
activation of a link up to the beginning of the XID
sequence.
|
| ibmappnNodeLsStatusNofRetry |
.1.3.6.1.4.1.2.6.2.13.1.5.5.1.8 |
|
Indicates whether Node Operator Facility will retry the
start request to activate the link.
|
| ibmappnNodeLsStatusEndSense |
.1.3.6.1.4.1.2.6.2.13.1.5.5.1.9 |
|
The sense code associated with the termination of the link
connection to adjacent node. This includes all sense
information included in the disconnect recieved from the
lower layer DLCs and also sense information indicating the
link termination originated by upper layer APPN components.
|
| ibmappnNodeLsStatusXidLocalSense |
.1.3.6.1.4.1.2.6.2.13.1.5.5.1.10 |
|
The error sense code associated with the rejection of the
XID.
|
| ibmappnNodeLsStatusXidRemoteSense |
.1.3.6.1.4.1.2.6.2.13.1.5.5.1.11 |
|
The error sense code adjacent node returned to this node
indicating the reason the XID was rejected.
|
| ibmappnNodeLsStatusXidByteInError |
.1.3.6.1.4.1.2.6.2.13.1.5.5.1.12 |
|
This identifies the actual byte in the XID that caused the
error. The value of zero (0) indicates that the variable
has no meaning.
|
| ibmappnNodeLsStatusXidBitInError |
.1.3.6.1.4.1.2.6.2.13.1.5.5.1.13 |
|
This identifies the actual bit within the error byte of the
XID. This only has meaning when the byte in error is
greater than zero.
|
| ibmappnNodeLsStatusDlcType |
.1.3.6.1.4.1.2.6.2.13.1.5.5.1.14 |
|
This identifies DLC type that was being used when error
occurred. This also is used to the format of the
local and remote address provided.
other = free form DisplayString
ip = ld. ld. ld. ld / 2d
tr = lx: lx: lx: lx: lx: lx . lx
dlsw = lx: lx: lx: lx: lx: lx . lx
ethernet = lx: lx: lx: lx: lx: lx . lx
|
| ibmappnNodeLsStatusLocalAddr |
.1.3.6.1.4.1.2.6.2.13.1.5.5.1.15 |
|
This contains a displayable string that identifies the
DLC type and appropriate address. See DlcType above for
details of the format.
|
| ibmappnNodeLsStatusRemoteAddr |
.1.3.6.1.4.1.2.6.2.13.1.5.5.1.16 |
|
This contains a displayable string that identifies the
DLC type and appropriate address. See DlcType above for
details of the format.
|
| ibmappnNnTopoRouteCos |
.1.3.6.1.4.1.2.6.2.13.2.1.23.1.1 |
|
The Class of Service for the route.
|
| ibmappnNnTopoRouteTrees |
.1.3.6.1.4.1.2.6.2.13.2.1.23.1.2 |
|
Number of routes tree caches built for this Class of
Service since the last initialization.
|
| ibmappnNnTopoRouteCalcs |
.1.3.6.1.4.1.2.6.2.13.2.1.23.1.3 |
|
Number of routes calculated since last initialization.
|
| ibmappnNnTopoRouteRejs |
.1.3.6.1.4.1.2.6.2.13.2.1.23.1.4 |
|
Number of route requests that could not
be calculated since last initialization.
|
| ibmappnNnAdjNodeAdjName |
.1.3.6.1.4.1.2.6.2.13.2.2.1.1 |
|
An administratively-assigned fully-qualified
name of this node's adjacent network node.
|
| ibmappnNnAdjNodeCpCpSessStatus |
.1.3.6.1.4.1.2.6.2.13.2.2.1.2 |
|
Indicates the state of CP-CP sessions between this node
and adjacent network and end nodes. Incative indicates no
CP-CP sessions exists between this node and the adjacent
node. Active indicates CP-CP sessons are active using both
the ConWinner and ConLoser sessions. The session initiated
by this node is refered to as the ConWinner session and is
used by this node to send to the adjacent node. The
ConLoserr session is initiated by the adjacent node and
is used by this node to receive from the adjacent node.
|
| ibmappnNnAdjNodeOutOfSeqTdus |
.1.3.6.1.4.1.2.6.2.13.2.2.1.3 |
|
Number of out of sequence Topology Database
Updates (TDUs). In a quiesced state, this value is
zero. In normal operation, the value varies
depending on the network environment.
|
| ibmappnNnAdjNodeLastFrsnSent |
.1.3.6.1.4.1.2.6.2.13.2.2.1.4 |
|
Flow reduction sequence numbers (FRSNs) are associated
with Topology Database Updates (TDUs) and are unique
only within each APPN network node. A TDU can be
associated with multiple APPN resources. This FRSN
indicates the last TDU sent to this adjacent node.
|
| ibmappnNnAdjNodeLastFrsnRcvd |
.1.3.6.1.4.1.2.6.2.13.2.2.1.5 |
|
Flow reduction sequence numbers (FRSNs) are associated
with Topology Database Updates (TDUs) and are unique
only within each APPN network node. A TDU can be
associated with multiple APPN resources. This FRSN
indicates the last TDU received from this adjacent node.
|
| ibmappnNnNodeName |
.1.3.6.1.4.1.2.6.2.13.2.3.1.1.1 |
|
Administratively-assigned network name that is locally
defined at each network node in the format NETID.CPNAME.
|
| ibmappnNnNodeFrsn |
.1.3.6.1.4.1.2.6.2.13.2.3.1.1.2 |
|
Flow reduction sequence numbers (FRSNs) are associated
with Topology Database Updates (TDUs) and are unique
only within each APPN network node. A TDU can be
associated with multiple APPN resources. This FRSN
indicates the last time this resource was updated at
this node.
|
| ibmappnNnNodeEntryTimeLeft |
.1.3.6.1.4.1.2.6.2.13.2.3.1.1.3 |
|
Number of days before deletion of this
network node entry. Range is 0-31.
|
| ibmappnNnNodeType |
.1.3.6.1.4.1.2.6.2.13.2.3.1.1.4 |
|
Type of APPN node.
|
| ibmappnNnNodeRsn |
.1.3.6.1.4.1.2.6.2.13.2.3.1.1.5 |
|
Resource sequence number that is assigned and
controlled by the network node that owns this
resource. This is always an even 32-bit number
unless an error has occurred.
|
| ibmappnNnNodeRouteAddResist |
.1.3.6.1.4.1.2.6.2.13.2.3.1.1.6 |
|
Route addition resistance
indicates the relative desirability
of using this node for intermediate session traffic.
The value, which can be any integer 0-255,
is used in route computation. The lower the value,
the more desirable the node is for intermediate routing.
|
| ibmappnNnNodeCongested |
.1.3.6.1.4.1.2.6.2.13.2.3.1.1.7 |
|
Indicates whether this node is congested.
This node is not be included in route selection
by other nodes when this congestion exists.
|
| ibmappnNnNodeIsrDepleted |
.1.3.6.1.4.1.2.6.2.13.2.3.1.1.8 |
|
Indicates whether intermediate session
routing resources are depleted. This node is
not included in intermediate route selection
by other nodes when resources are depleted.
|
| ibmappnNnNodeEndptDepleted |
.1.3.6.1.4.1.2.6.2.13.2.3.1.1.9 |
|
Indicates whether session endpoint resources are depleted.
|
| ibmappnNnNodeQuiescing |
.1.3.6.1.4.1.2.6.2.13.2.3.1.1.10 |
|
Indicates whether the node is quiescing.
This node is not included in route selection
by other nodes when the node is quiescing.
|
| ibmappnNnNodeGateway |
.1.3.6.1.4.1.2.6.2.13.2.3.1.1.11 |
|
Indicates whether the node provide gateway functions.
|
| ibmappnNnNodeCentralDirectory |
.1.3.6.1.4.1.2.6.2.13.2.3.1.1.12 |
|
Indicates whether the node is central directory.
|
| ibmappnNnNodeIsr |
.1.3.6.1.4.1.2.6.2.13.2.3.1.1.13 |
|
Indicates whether the node supports intermediate session
routing (ISR).
|
| ibmappnNnNodeChainSupport |
.1.3.6.1.4.1.2.6.2.13.2.3.1.1.14 |
|
Indicates whether the node supports chaining.
|
| ibmappnNnTgOwner |
.1.3.6.1.4.1.2.6.2.13.2.3.2.1.1 |
|
Administratively-assigned name for the
originating node for this TG. The format
is NETID.CPNAME and is the same name
specified in the node table.
|
| ibmappnNnTgDest |
.1.3.6.1.4.1.2.6.2.13.2.3.2.1.2 |
|
Administratively-assigned fully-qualified
network name for the destination node for this TG.
|
| ibmappnNnTgNum |
.1.3.6.1.4.1.2.6.2.13.2.3.2.1.3 |
|
Number associated with this
transmission group. Range is 0-255.
|
| ibmappnNnTgFrsn |
.1.3.6.1.4.1.2.6.2.13.2.3.2.1.4 |
|
Flow reduction sequence numbers (FRSNs) are associated
with Topology Database Updates (TDUs) and are unique
only within each APPN network node. A TDU can be
associated with multiple APPN resources. This FRSN
indicates the last time this resource was updated at
this node.
|
| ibmappnNnTgEntryTimeLeft |
.1.3.6.1.4.1.2.6.2.13.2.3.2.1.5 |
|
Number of days before deletion of this
network node TG entry. Range is 0-31.
|
| ibmappnNnTgDestVirtual |
.1.3.6.1.4.1.2.6.2.13.2.3.2.1.6 |
|
Indicates whether the destination node is
a virtual node.
|
| ibmappnNnTgDlcData |
.1.3.6.1.4.1.2.6.2.13.2.3.2.1.7 |
|
DLC specific data related to the link connection
network.
Token-Ring - MAC/SAP
X.25 Switched - dial digits
X.21 Switched - dial digits
Circuit Swtch - dial digits
|
| ibmappnNnTgRsn |
.1.3.6.1.4.1.2.6.2.13.2.3.2.1.8 |
|
Current owning node's resource sequence number
for this resource.
|
| ibmappnNnTgOperational |
.1.3.6.1.4.1.2.6.2.13.2.3.2.1.9 |
|
Indicates whether the transmission group
is operational.
|
| ibmappnNnTgQuiescing |
.1.3.6.1.4.1.2.6.2.13.2.3.2.1.10 |
|
Indicates whether the transmission group
is quiescing.
|
| ibmappnNnTgCpCpSession |
.1.3.6.1.4.1.2.6.2.13.2.3.2.1.11 |
|
Indicates whether CP-CP sessions are supported on this TG.
|
| ibmappnNnTgEffCap |
.1.3.6.1.4.1.2.6.2.13.2.3.2.1.12 |
|
The effective capacity is an integer value that indicates
the kilo bits per second.
It is derived from the link bandwidth and maximum load
factor with the range of 0 thru 603,979,776.
This is an administratively assigned value associated
with this TG.
|
| ibmappnNnTgConnCost |
.1.3.6.1.4.1.2.6.2.13.2.3.2.1.13 |
|
Cost per connect time: a value representing
the relative cost per unit of time to use
the TG. Range is from 0, which means no cost,
to 255, which indicates maximum cost.
This is an administratively assigned value associated
with this TG.
|
| ibmappnNnTgByteCost |
.1.3.6.1.4.1.2.6.2.13.2.3.2.1.14 |
|
Relative cost of transmitting a byte over this link.
Range is from 0 (lowest cost) to 255.
This is an administratively assigned value associated
with this TG.
|
| ibmappnNnTgSecurity |
.1.3.6.1.4.1.2.6.2.13.2.3.2.1.15 |
|
The security is represented as an integer with a range of
1 thru 255 with the most common values enumerated as
defined above.
This is an administratively assigned value associated
with this TG.
|
| ibmappnNnTgDelay |
.1.3.6.1.4.1.2.6.2.13.2.3.2.1.16 |
|
Relative amount of time that it takes for a signal to
travel the length of the logical link. This time is
represented in micro seconds, with some of the more
common values enumerated.
This is an administratively assigned value associated
with this TG.
|
| ibmappnNnTgModemClass |
.1.3.6.1.4.1.2.6.2.13.2.3.2.1.17 |
|
This is used to have multiple images for a
connection network. For a connection network
it is the same as in the TG vector; for
a non-connection network it is X'00'.
|
| ibmappnNnTgUsr1 |
.1.3.6.1.4.1.2.6.2.13.2.3.2.1.18 |
|
First user-defined TG characteristic for this TG with
a range of 0-255.
This is an administratively assigned value associated
with this TG.
|
| ibmappnNnTgUsr2 |
.1.3.6.1.4.1.2.6.2.13.2.3.2.1.19 |
|
Second user-defined TG characteristic for this TG with
a range of 0-255.
This is an administratively assigned value associated
with this TG.
|
| ibmappnNnTgUsr3 |
.1.3.6.1.4.1.2.6.2.13.2.3.2.1.20 |
|
Third user-defined TG characteristic for this TG with
a range of 0-255.
This is an administratively assigned value associated
with this TG.
|
| ibmappnNnNodeFRFrsn |
.1.3.6.1.4.1.2.6.2.13.2.3.3.1.2 |
|
Flow reduction sequence numbers (FRSNs) are associated
with Topology Database Updates (TDUs) and are unique
only within each APPN network node. A TDU can be
associated with multiple APPN resources. This FRSN
indicates the last time this resource was updated at
this node.
|
| ibmappnNnNodeFRName |
.1.3.6.1.4.1.2.6.2.13.2.3.3.1.1 |
|
Administratively-assigned network name that is locally
defined at each network node in the format NETID.CPNAME.
|
| ibmappnNnNodeFREntryTimeLeft |
.1.3.6.1.4.1.2.6.2.13.2.3.3.1.3 |
|
Number of days before deletion of this
network node entry. Range is 0-31.
|
| ibmappnNnNodeFRType |
.1.3.6.1.4.1.2.6.2.13.2.3.3.1.4 |
|
Type of APPN node.
|
| ibmappnNnNodeFRRsn |
.1.3.6.1.4.1.2.6.2.13.2.3.3.1.5 |
|
Resource sequence number that is assigned and
controlled by the network node that owns this
resource. This is always an even 32-bit number
unless an error has occurred.
|
| ibmappnNnNodeFRRouteAddResist |
.1.3.6.1.4.1.2.6.2.13.2.3.3.1.6 |
|
Route addition resistance
indicates the relative desirability
of using this node for intermediate session traffic.
The value, which can be any integer 0-255,
is used in route computation. The lower the value,
the more desirable the node is for intermediate routing.
|
| ibmappnNnNodeFRCongested |
.1.3.6.1.4.1.2.6.2.13.2.3.3.1.7 |
|
Indicates whether this node is congested.
This node is not be included in route selection
by other nodes when this congestion exists.
|
| ibmappnNnNodeFRIsrDepleted |
.1.3.6.1.4.1.2.6.2.13.2.3.3.1.8 |
|
Indicates whether intermediate session
routing resources are depleted. This node is
not included in intermediate route selection
by other nodes when resources are depleted.
|
| ibmappnNnNodeFREndptDepleted |
.1.3.6.1.4.1.2.6.2.13.2.3.3.1.9 |
|
Indicates whether session endpoint resources are depleted.
|
| ibmappnNnNodeFRQuiescing |
.1.3.6.1.4.1.2.6.2.13.2.3.3.1.10 |
|
Indicates whether the node is quiescing.
This node is not included in route selection
by other nodes when the node is quiescing.
|
| ibmappnNnNodeFRGateway |
.1.3.6.1.4.1.2.6.2.13.2.3.3.1.11 |
|
Indicates whether the node provide gateway functions.
|
| ibmappnNnNodeFRCentralDirectory |
.1.3.6.1.4.1.2.6.2.13.2.3.3.1.12 |
|
Indicates whether the node is central directory.
|
| ibmappnNnNodeFRIsr |
.1.3.6.1.4.1.2.6.2.13.2.3.3.1.13 |
|
Indicates whether the node supports intermediate session
routing (ISR).
|
| ibmappnNnNodeFRChainSupport |
.1.3.6.1.4.1.2.6.2.13.2.3.3.1.14 |
|
Indicates whether the node supports chaining.
|
| ibmappnNnTgFRFrsn |
.1.3.6.1.4.1.2.6.2.13.2.3.4.1.4 |
|
Flow reduction sequence numbers (FRSNs) are associated
with Topology Database Updates (TDUs) and are unique
only within each APPN network node. A TDU can be
associated with multiple APPN resources. This FRSN
indicates the last time this resource was updated at
this node.
|
| ibmappnNnTgFROwner |
.1.3.6.1.4.1.2.6.2.13.2.3.4.1.1 |
|
Administratively-assigned name for the
originating node for this TG. The format
is NETID.CPNAME and is the same name
specified in the node table.
|
| ibmappnNnTgFRDest |
.1.3.6.1.4.1.2.6.2.13.2.3.4.1.2 |
|
Administratively-assigned fully-qualified
network name for the destination node for this TG.
|
| ibmappnNnTgFRNum |
.1.3.6.1.4.1.2.6.2.13.2.3.4.1.3 |
|
Number associated with this
transmission group. Range is 0-255.
|
| ibmappnNnTgFREntryTimeLeft |
.1.3.6.1.4.1.2.6.2.13.2.3.4.1.5 |
|
Number of days before deletion of this
network node TG entry. Range is 0-31.
|
| ibmappnNnTgFRDestVirtual |
.1.3.6.1.4.1.2.6.2.13.2.3.4.1.6 |
|
Indicates whether the destination node is
a virtual node.
|
| ibmappnNnTgFRDlcData |
.1.3.6.1.4.1.2.6.2.13.2.3.4.1.7 |
|
DLC specific data related to the link connection
network.
Token-Ring - MAC/SAP
X.25 Switched - dial digits
X.21 Switched - dial digits
Circuit Swtch - dial digits
|
| ibmappnNnTgFRRsn |
.1.3.6.1.4.1.2.6.2.13.2.3.4.1.8 |
|
Current owning node's resource sequence number
for this resource.
|
| ibmappnNnTgFROperational |
.1.3.6.1.4.1.2.6.2.13.2.3.4.1.9 |
|
Indicates whether the transmission group
is operational.
|
| ibmappnNnTgFRQuiescing |
.1.3.6.1.4.1.2.6.2.13.2.3.4.1.10 |
|
Indicates whether the transmission group
is quiescing.
|
| ibmappnNnTgFRCpCpSession |
.1.3.6.1.4.1.2.6.2.13.2.3.4.1.11 |
|
Indicates whether CP-CP sessions are supported on this TG.
|
| ibmappnNnTgFREffCap |
.1.3.6.1.4.1.2.6.2.13.2.3.4.1.12 |
|
The effective capacity is an integer value that indicates
the kilo bits per second.
It is derived from the link bandwidth and maximum load
factor with the range of 0 thru 603,979,776.
This is an administratively assigned value associated
with this TG.
|
| ibmappnNnTgFRConnCost |
.1.3.6.1.4.1.2.6.2.13.2.3.4.1.13 |
|
Cost per connect time: a value representing
the relative cost per unit of time to use
the TG. Range is from 0, which means no cost,
to 255, which indicates maximum cost.
This is an administratively assigned value associated
with this TG.
|
| ibmappnNnTgFRByteCost |
.1.3.6.1.4.1.2.6.2.13.2.3.4.1.14 |
|
Relative cost of transmitting a byte over this link.
Range is from 0 (lowest cost) to 255.
This is an administratively assigned value associated
with this TG.
|
| ibmappnNnTgFRSecurity |
.1.3.6.1.4.1.2.6.2.13.2.3.4.1.15 |
|
The security is represented as an integer with a range of
1 thru 255 with the most common values enumerated as
defined above.
This is an administratively assigned value associated
with this TG.
|
| ibmappnNnTgFRDelay |
.1.3.6.1.4.1.2.6.2.13.2.3.4.1.16 |
|
Relative amount of time that it takes for a signal to
travel the length of the logical link. This time is
represented in micro seconds, with some of the more
common values enumerated.
This is an administratively assigned value associated
with this TG.
|
| ibmappnNnTgFRModemClass |
.1.3.6.1.4.1.2.6.2.13.2.3.4.1.17 |
|
This is used to have multiple images for a
connection network. For a connection network
it is the same as in the TG vector; for
a non-connection network it is X'00'.
|
| ibmappnNnTgFRUsr1 |
.1.3.6.1.4.1.2.6.2.13.2.3.4.1.18 |
|
First user-defined TG characteristic for this TG with
a range of 0-255.
This is an administratively assigned value associated
with this TG.
|
| ibmappnNnTgFRUsr2 |
.1.3.6.1.4.1.2.6.2.13.2.3.4.1.19 |
|
Second user-defined TG characteristic for this TG with
a range of 0-255.
This is an administratively assigned value associated
with this TG.
|
| ibmappnNnTgFRUsr3 |
.1.3.6.1.4.1.2.6.2.13.2.3.4.1.20 |
|
Third user-defined TG characteristic for this TG with
a range of 0-255.
This is an administratively assigned value associated
with this TG.
|
| ibmappnLocalTgDest |
.1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.1 |
|
Administratively-assigned name for the
destination node for this TG.
This is the fully-qualified network node
name.
|
| ibmappnLocalTgNum |
.1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.2 |
|
Number associated with this transmission group.
|
| ibmappnLocalTgDestVirtual |
.1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.3 |
|
Indicates whether the destination node is
a Virtual node.
|
| ibmappnLocalTgDlcData |
.1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.4 |
|
DLC specific data related to the link connection
network.
Token-Ring - MAC/SAP
X.25 Switched - dial digits
X.21 Switched - dial digits
Circuit Swtch - dial digits
|
| ibmappnLocalTgRsn |
.1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.5 |
|
The resource sequence number is assigned and
controlled by the network node that owns this
resource. This is always an even unsigned
number unless an error has occurred.
|
| ibmappnLocalTgQuiescing |
.1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.6 |
|
Indicates whether the Transmission Group
is quiescing.
|
| ibmappnLocalTgOperational |
.1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.7 |
|
Indicates whether the Transmission Group
is operational.
|
| ibmappnLocalTgCpCpSession |
.1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.8 |
|
Indicates whether the CP-CP Sessions are
supported on this TG.
|
| ibmappnLocalTgEffCap |
.1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.9 |
|
The effective capacity is an integer value that indicates
the actual kilo bits per second.
It is derived from the link bandwidth and maximum load
factor with the range of 0 thru 603,979,776.
|
| ibmappnLocalTgConnCost |
.1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.10 |
|
Cost per connect time: a value representing
the relative cost per unit of time to use
the TG. Range is from 0, which means no cost,
to 255.
|
| ibmappnLocalTgByteCost |
.1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.11 |
|
Relative cost of transmitting a byte over this link.
Range is from 0 (lowest cost) to 255.
|
| ibmappnLocalTgSecurity |
.1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.12 |
|
Security level for this TG.
|
| ibmappnLocalTgDelay |
.1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.13 |
|
Relative amount of time that it takes for a signal to
travel the length of the logical link. This time is
represented in micro seconds, with some of the more
common values enumerated.
|
| ibmappnLocalTgModemClass |
.1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.14 |
|
This is used to have multiple images for a
connection network. For a connection network
it is the same as in the TG vector and for
a non-connection network it is zero.
|
| ibmappnLocalTgUsr1 |
.1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.15 |
|
Value of the first user-defined TG
characteristic for this TG.
Range is 0-255.
|
| ibmappnLocalTgUsr2 |
.1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.16 |
|
Value of the second user-defined TG
characteristic for this TG.
Range is 0-255.
|
| ibmappnLocalTgUsr3 |
.1.3.6.1.4.1.2.6.2.13.3.1.3.1.1.17 |
|
Value of the third user-defined TG
characteristic for this TG.
Range is 0-255.
|
| ibmappnLocalEnName |
.1.3.6.1.4.1.2.6.2.13.3.2.1.1.1 |
|
Administratively-assigned fully-qualified
name of end node in the format NETID.CPNAME.
|
| ibmappnLocalEnEntryTimeLeft |
.1.3.6.1.4.1.2.6.2.13.3.2.1.1.2 |
|
Number of days before deletion of this
end node entry. Range is 0-31.
|
| ibmappnLocalEnType |
.1.3.6.1.4.1.2.6.2.13.3.2.1.1.3 |
|
Type of APPN node (must always be a len or end node).
|
| ibmappnLocalEnTgOrigin |
.1.3.6.1.4.1.2.6.2.13.3.2.2.1.1 |
|
Administratively-assigned name for the
origination node for this TG.
This is the fully-qualified network name.
|
| ibmappnLocalEnTgDest |
.1.3.6.1.4.1.2.6.2.13.3.2.2.1.2 |
|
Administratively-assigned name for the
destination node for this TG.
This is the fully-qualified network name.
|
| ibmappnLocalEnTgNum |
.1.3.6.1.4.1.2.6.2.13.3.2.2.1.3 |
|
Number associated with this transmission group.
|
| ibmappnLocalEnTgEntryTimeLeft |
.1.3.6.1.4.1.2.6.2.13.3.2.2.1.4 |
|
Number of days before deletion of this
end node TG entry. Range is 0-31.
|
| ibmappnLocalEnTgDestVirtual |
.1.3.6.1.4.1.2.6.2.13.3.2.2.1.5 |
|
Indicates whether the destination node is
a virtual node.
|
| ibmappnLocalEnTgDlcData |
.1.3.6.1.4.1.2.6.2.13.3.2.2.1.6 |
|
DLC specific data related to the link connection
network.
Token-Ring - MAC/SAP
X.25 Switched - dial digits
X.21 Switched - dial digits
Circuit Swtch - dial digits
|
| ibmappnLocalEnTgOperational |
.1.3.6.1.4.1.2.6.2.13.3.2.2.1.7 |
|
Indicates whether the Transmission Group is operational.
|
| ibmappnLocalEnTgCpCpSession |
.1.3.6.1.4.1.2.6.2.13.3.2.2.1.8 |
|
Indicates whether CP-CP sessions are supported on this TG.
|
| ibmappnLocalEnTgEffCap |
.1.3.6.1.4.1.2.6.2.13.3.2.2.1.9 |
|
The effective capacity is an integer value that indicates
the actual kilo bits per second.
It is derived from the link bandwidth and maximum load
factor with the range of 0 thru 603,979,776.
|
| ibmappnLocalEnTgConnCost |
.1.3.6.1.4.1.2.6.2.13.3.2.2.1.10 |
|
Cost per connect time: a value representing
the relative cost per unit of time to use
the TG. Range is from 0, which means no cost,
to 255.
|
| ibmappnLocalEnTgByteCost |
.1.3.6.1.4.1.2.6.2.13.3.2.2.1.11 |
|
Relative cost of transmitting a byte over this link.
Range is from 0, which means no cost, to 255.
|
| ibmappnLocalEnTgSecurity |
.1.3.6.1.4.1.2.6.2.13.3.2.2.1.12 |
|
Security level for this TG.
|
| ibmappnLocalEnTgDelay |
.1.3.6.1.4.1.2.6.2.13.3.2.2.1.13 |
|
Relative amount of time that it takes for a signal to
travel the length of the logical link. This time is
represented in micro seconds, with some of the more
common values enumerated.
|
| ibmappnLocalEnTgModemClass |
.1.3.6.1.4.1.2.6.2.13.3.2.2.1.14 |
|
This is used to have multiple images for a
connection network. For a connection network
it is the same as in the TG vector and for
a non connection network it is zero.
|
| ibmappnLocalEnTgUsr1 |
.1.3.6.1.4.1.2.6.2.13.3.2.2.1.15 |
|
First user-defined TG characteristic
for this TG. Range of values is 0-255.
|
| ibmappnLocalEnTgUsr2 |
.1.3.6.1.4.1.2.6.2.13.3.2.2.1.16 |
|
Second user-defined TG characteristic
for this TG. Range of values is 0-255.
|
| ibmappnLocalEnTgUsr3 |
.1.3.6.1.4.1.2.6.2.13.3.2.2.1.17 |
|
Third user-defined TG characteristic
for this TG. Range of values is 0-255.
|
| ibmappnDirLuName |
.1.3.6.1.4.1.2.6.2.13.5.2.1.1 |
|
Fully-qualified network LU name in the
domain of the serving network node.
|
| ibmappnDirServerName |
.1.3.6.1.4.1.2.6.2.13.5.2.1.2 |
|
Fully-qualified control point (CP) name of the
network node server. For unassociated end node
entries, the end node fully-qualified name
is returned.
|
| ibmappnDirLuOwnerName |
.1.3.6.1.4.1.2.6.2.13.5.2.1.3 |
|
Fully-qualified CP name of the node at which
the LU is located. This name is the same as the
serving NN name when the LU is located at a
network node or an unassociated end node. It is
also the same as the fully-qualified LU name
when this is the control point LU for this node.
|
| ibmappnDirLuLocation |
.1.3.6.1.4.1.2.6.2.13.5.2.1.4 |
|
Specifies the location of the LU.
|
| ibmappnDirType |
.1.3.6.1.4.1.2.6.2.13.5.2.1.5 |
|
Directory types are:
1 - Home
The LU is in the domain of the local network node
and the LU information has been configured at the
local node.
2 - Cache
The LU has previously been located by a broadcast
search and the location information has been saved.
3 - Register
The LU is at an end node that is in the domain
of the local network node. Registered entries
are registered by the served end node.
|
| ibmappnDirWildCard |
.1.3.6.1.4.1.2.6.2.13.5.2.1.6 |
|
1 - Other means unknown type of LU entry.
2 - Expliced-entry means the full LUNAME will be used
for locating this LU.
3 - Partial-wildcard means only the non-blank portions
of the LUNAME will be used for locating this LU.
4 - Full-wildcard means all LUNAMES will be directed
to this LU.
|
| ibmappnCosModeName |
.1.3.6.1.4.1.2.6.2.13.6.1.1.1 |
|
Administratively-assigned name for this
mode entry.
|
| ibmappnCosModeCosName |
.1.3.6.1.4.1.2.6.2.13.6.1.1.2 |
|
An administratively assigned name for this
Class of Service.
|
| ibmappnCosName |
.1.3.6.1.4.1.2.6.2.13.6.2.1.1 |
|
Administratively-assigned name for this
class of service.
|
| ibmappnCosTransPriority |
.1.3.6.1.4.1.2.6.2.13.6.2.1.2 |
|
Transmission priority for this
class of service. Values are:
Low
Medium
High
Network
|
| ibmappnCosNodeRowName |
.1.3.6.1.4.1.2.6.2.13.6.3.1.1 |
|
Administratively-assigned name for this
class of service.
|
| ibmappnCosNodeRowIndex |
.1.3.6.1.4.1.2.6.2.13.6.3.1.2 |
|
Index of COS name. This same value is used
to access the node and TG COS tables.
Range of values is 0-255.
|
| ibmappnCosNodeRowWgt |
.1.3.6.1.4.1.2.6.2.13.6.3.1.3 |
|
Weight to be associated with the nodes
that fit the criteria specified by this node row.
|
| ibmappnCosNodeRowResistMin |
.1.3.6.1.4.1.2.6.2.13.6.3.1.4 |
|
Minimum route addition resistance value
for this node. Range of values is 0-255.
The lower the value, the more desirable
the node is for intermediate routing.
|
| ibmappnCosNodeRowResistMax |
.1.3.6.1.4.1.2.6.2.13.6.3.1.5 |
|
Maximum route addition resistance value
for this node. Range of values is 0-255.
The lower the value, the more desirable
the node is for intermediate routing.
|
| ibmappnCosNodeRowMinCongestAllow |
.1.3.6.1.4.1.2.6.2.13.6.3.1.6 |
|
Indicates whether low congestion will be
tolerated. The minimum and maximum parameters
will allow specifying either low-congested,
high-congested, or either to be used.
|
| ibmappnCosNodeRowMaxCongestAllow |
.1.3.6.1.4.1.2.6.2.13.6.3.1.7 |
|
Indicates whether high congestion will be
tolerated. The minimum and maximum parameters
will allow specifying either low-congested,
high-congested, or either to be used.
|
| ibmappnCosTgRowName |
.1.3.6.1.4.1.2.6.2.13.6.4.1.1 |
|
Administratively-assigned name for this
class of service.
|
| ibmappnCosTgRowIndex |
.1.3.6.1.4.1.2.6.2.13.6.4.1.2 |
|
Index of COS name. This same value is used
to access the node and TG COS tables.
|
| ibmappnCosTgRowWgt |
.1.3.6.1.4.1.2.6.2.13.6.4.1.3 |
|
Weight to be associated with the nodes
that fit the criteria specified by this tg-row.
|
| ibmappnCosTgRowEffCapMin |
.1.3.6.1.4.1.2.6.2.13.6.4.1.4 |
|
Minimum acceptable speed for this Class of Service.
The effective capacity is an integer value that indicates
the actual kilo bits per second.
It is derived from the link bandwidth and maximum load
factor with the range of 0 thru 603,979,776.
|
| ibmappnCosTgRowEffCapMax |
.1.3.6.1.4.1.2.6.2.13.6.4.1.5 |
|
Maximum acceptable speed for this Class of Service.
The effective capacity is an integer value that indicates
the actual kilo bits per second.
It is derived from the link bandwidth and maximum load
factor with the range of 0 thru 603,979,776.
|
| ibmappnCosTgRowConnCostMin |
.1.3.6.1.4.1.2.6.2.13.6.4.1.6 |
|
Minimum acceptable cost per connect time
for this Class of Service.
Cost per connect time: a value representing
the relative cost per unit of time to use
the TG. Range is from 0, which means no cost,
to 255.
|
| ibmappnCosTgRowConnCostMax |
.1.3.6.1.4.1.2.6.2.13.6.4.1.7 |
|
Maximum acceptable cost per connect time
for this Class of Service.
Cost per connect time: a value representing
the relative cost per unit of time to use
the TG. Range is from 0, which means no cost,
to 255.
|
| ibmappnCosTgRowByteCostMin |
.1.3.6.1.4.1.2.6.2.13.6.4.1.8 |
|
Minimum acceptable cost per byte
for this Class of Service.
|
| ibmappnCosTgRowByteCostMax |
.1.3.6.1.4.1.2.6.2.13.6.4.1.9 |
|
Maximum acceptable cost per byte
for this Class of Service.
|
| ibmappnCosTgRowSecurityMin |
.1.3.6.1.4.1.2.6.2.13.6.4.1.10 |
|
Minimum acceptable security
for this Class of Service.
|
| ibmappnCosTgRowSecurityMax |
.1.3.6.1.4.1.2.6.2.13.6.4.1.11 |
|
Maximum acceptable security
for this Class of Service.
|
| ibmappnCosTgRowDelayMin |
.1.3.6.1.4.1.2.6.2.13.6.4.1.12 |
|
Minimum acceptable propagation delay for this class of service.
Relative amount of time that it takes for a signal to travel
the length of the logical link. This time is represented in
micro seconds, with the more values enumerated.
|
| ibmappnCosTgRowDelayMax |
.1.3.6.1.4.1.2.6.2.13.6.4.1.13 |
|
Maximum acceptable propagation delay for this class of service.
Relative amount of time that it takes for a signal to travel
the length of the logical link. This time is represented in
micro seconds, with the more values enumerated.
|
| ibmappnCosTgRowUsr1Min |
.1.3.6.1.4.1.2.6.2.13.6.4.1.14 |
|
Minimum acceptable value for this
user defined characteristic.
Range of values is 0-255.
|
| ibmappnCosTgRowUsr1Max |
.1.3.6.1.4.1.2.6.2.13.6.4.1.15 |
|
Maximum acceptable value for this
user defined characteristic.
Range of values is 0-255.
|
| ibmappnCosTgRowUsr2Min |
.1.3.6.1.4.1.2.6.2.13.6.4.1.16 |
|
Minimum acceptable value for this
user defined characteristic.
Range of values is 0-255.
|
| ibmappnCosTgRowUsr2Max |
.1.3.6.1.4.1.2.6.2.13.6.4.1.17 |
|
A Maximum acceptable value for this
user defined characteristic.
|
| ibmappnCosTgRowUsr3Min |
.1.3.6.1.4.1.2.6.2.13.6.4.1.18 |
|
Minimum acceptable value for this
user defined characteristic.
Range of values is 0-255.
|
| ibmappnCosTgRowUsr3Max |
.1.3.6.1.4.1.2.6.2.13.6.4.1.19 |
|
Maximum acceptable value for this
user defined characteristic.
Range of values is 0-255.
|
