ActiveXperts Network Monitor 2019##AdminFavorites

IPV6-TC by vendor RFC

IPV6-TC file content

The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.

Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.

Use ActiveXperts Network Monitor 2019 to import vendor-specific MIB files, inclusing IPV6-TC.


Vendor: RFC
Mib: IPV6-TC  [download]
Tool: ActiveXperts Network Monitor 2019 [download]    (ships with advanced SNMP/MIB tools)
-- WinAgents MIB Extraction Wizard
-- Extracted from rfc2465.txt 16.03.2005 20:21:48

IPV6-TC DEFINITIONS ::= BEGIN

IMPORTS
     Integer32                FROM SNMPv2-SMI
     TEXTUAL-CONVENTION       FROM SNMPv2-TC;


-- definition of textual conventions
Ipv6Address ::= TEXTUAL-CONVENTION
     DISPLAY-HINT "2x:"
     STATUS       current
     DESCRIPTION
       "This data type is used to model IPv6 addresses.
        This is a binary string of 16 octets in network
        byte-order."
     SYNTAX       OCTET STRING (SIZE (16))

Ipv6AddressPrefix ::= TEXTUAL-CONVENTION
     DISPLAY-HINT "2x:"
     STATUS       current
     DESCRIPTION
       "This data type is used to model IPv6 address
       prefixes. This is a binary string of up to 16
       octets in network byte-order."
     SYNTAX       OCTET STRING (SIZE (0..16))

Ipv6AddressIfIdentifier ::= TEXTUAL-CONVENTION
     DISPLAY-HINT "2x:"
     STATUS       current
     DESCRIPTION
       "This data type is used to model IPv6 address
       interface identifiers. This is a binary string
        of up to 8 octets in network byte-order."
     SYNTAX      OCTET STRING (SIZE (0..8))

Ipv6IfIndex ::= TEXTUAL-CONVENTION
     DISPLAY-HINT "d"
     STATUS       current
     DESCRIPTION
       "A unique value, greater than zero for each
       internetwork-layer interface in the managed
       system. It is recommended that values are assigned
       contiguously starting from 1. The value for each
       internetwork-layer interface must remain constant
       at least from one re-initialization of the entity's
       network management system to the next

       re-initialization."
     SYNTAX       Integer32 (1..2147483647)

Ipv6IfIndexOrZero ::= TEXTUAL-CONVENTION
     DISPLAY-HINT "d"
     STATUS       current
     DESCRIPTION
         "This textual convention is an extension of the
         Ipv6IfIndex convention.  The latter defines
         a greater than zero value used to identify an IPv6
         interface in the managed system.  This extension
         permits the additional value of zero.  The value
         zero is object-specific and must therefore be
         defined as part of the description of any object
         which uses this syntax.  Examples of the usage of
         zero might include situations where interface was
         unknown, or when none or all interfaces need to be
         referenced."
     SYNTAX       Integer32 (0..2147483647)

END