You are here:

MonitorTools.com > Technical documentation > SNMP > MIB > RFC > TN3270E-RT-MIB
ActiveXperts Network Monitor 2019##AdminFavorites

TN3270E-RT-MIB by vendor RFC

TN3270E-RT-MIB file content

The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.

Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.

Use ActiveXperts Network Monitor 2019 to import vendor-specific MIB files, inclusing TN3270E-RT-MIB.


Vendor: RFC
Mib: TN3270E-RT-MIB  [download]  [view objects]
Tool: ActiveXperts Network Monitor 2019 [download]    (ships with advanced SNMP/MIB tools)
-- WinAgents MIB Extraction Wizard
-- Extracted from rfc2562.txt 16.03.2005 20:21:49

TN3270E-RT-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
    Counter32, Unsigned32, Gauge32
                FROM SNMPv2-SMI
    RowStatus, DateAndTime, TimeStamp, TestAndIncr
                FROM SNMPv2-TC
    MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
                FROM SNMPv2-CONF
    tn3270eSrvrConfIndex, tn3270eClientGroupName,
    tn3270eResMapElementType
                FROM TN3270E-MIB
    IANATn3270eAddrType, IANATn3270eAddress
                FROM IANATn3270eTC-MIB
    snanauMIB
                FROM SNA-NAU-MIB;

  tn3270eRtMIB   MODULE-IDENTITY
      LAST-UPDATED "9807270000Z" -- July 27, 1998
      ORGANIZATION "TN3270E Working Group"
      CONTACT-INFO
        "Kenneth White (kennethw@vnet.ibm.com)
         IBM Corp. - Dept. BRQA/Bldg. 501/G114
         P.O. Box 12195

         3039 Cornwallis
         RTP, NC 27709-2195

         Robert Moore (remoore@us.ibm.com)
         IBM Corp. - Dept. BRQA/Bldg. 501/G114
         P.O. Box 12195
         3039 Cornwallis
         RTP, NC 27709-2195
         (919) 254-4436"
     DESCRIPTION
        "This module defines a portion of the management
        information base (MIB) that enables monitoring of
        TN3270 and TN3270E clients' response times by a
        TN3270E server."
     REVISION  "9807270000Z" -- July 27, 1998
     DESCRIPTION
         "RFC nnnn (Proposed Standard)" -- RFC Editor to fill in

::= { snanauMIB 9 }
-- snanauMIB ::= { mib-2 34 }

-- Top level structure of the MIB

tn3270eRtNotifications   OBJECT IDENTIFIER  ::= { tn3270eRtMIB 0 }
tn3270eRtObjects         OBJECT IDENTIFIER  ::= { tn3270eRtMIB 1 }
tn3270eRtConformance     OBJECT IDENTIFIER  ::= { tn3270eRtMIB 3 }

-- MIB Objects

-- Response Time Control Table

tn3270eRtCollCtlTable  OBJECT-TYPE
    SYNTAX       SEQUENCE OF Tn3270eRtCollCtlEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
      "The response time monitoring collection control table,
      which allows a management application to control the
      types of response time data being collected, and the
      clients for which it is being collected.

      This table is indexed by tn3270eSrvrConfIndex and
      tn3270eClientGroupName imported from the
      TN3270E-MIB.  tn3270eSrvrConfIndex indicates within
      a host which TN3270E server an entry applies to.
      tn3270eClientGroupName it identifies the set of IP
      clients for which response time data is being collected.
      The particular IP clients making up the set are identified
      in the tn3270eClientGroupTable in the TN3270E-MIB."

    ::= { tn3270eRtObjects 1}

tn3270eRtCollCtlEntry    OBJECT-TYPE
    SYNTAX        Tn3270eRtCollCtlEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
      "An entry in the TN3270E response time monitoring collection
      control table.  To handle the case of multiple TN3270E
      servers on the same host, the first index of this table is
      the tn3270eSrvrConfIndex from the TN3270E-MIB."
    INDEX {
      tn3270eSrvrConfIndex,    -- Server's index
      tn3270eClientGroupName } -- What to collect on

    ::= { tn3270eRtCollCtlTable 1 }

Tn3270eRtCollCtlEntry ::= SEQUENCE {
    tn3270eRtCollCtlType              BITS,
    tn3270eRtCollCtlSPeriod           Unsigned32,
    tn3270eRtCollCtlSPMult            Unsigned32,
    tn3270eRtCollCtlThreshHigh        Unsigned32,
    tn3270eRtCollCtlThreshLow         Unsigned32,
    tn3270eRtCollCtlIdleCount         Unsigned32,
    tn3270eRtCollCtlBucketBndry1      Unsigned32,
    tn3270eRtCollCtlBucketBndry2      Unsigned32,
    tn3270eRtCollCtlBucketBndry3      Unsigned32,
    tn3270eRtCollCtlBucketBndry4      Unsigned32,
    tn3270eRtCollCtlRowStatus         RowStatus   }

-- The OID { tn3270eRtCollCtlEntry 1 } is not used

tn3270eRtCollCtlType  OBJECT-TYPE
    SYNTAX    BITS {
                     aggregate(0),
                     excludeIpComponent(1),
                     ddr(2),
                     average(3),
                     buckets(4),
                     traps(5)
                   }
    MAX-ACCESS   read-create
    STATUS       current
    DESCRIPTION
      "This object controls what types of response time data to
       collect, whether to summarize the data across the members
       of a client group or keep it individually, whether to
       introduce dynamic definite responses, and whether to
       generate traps.

       aggregate(0)          - Aggregate response time data for the
                               client group as a whole.  If this bit
                               is set to 0, then maintain response
                               time data separately for each member
                               of the client group.
       excludeIpComponent(1) - Do not include the IP-network
                               component in any response times.
       ddr(2)                - Enable dynamic definite response.
       average(3)            - Produce an average response time
                               based on a specified collection
                               interval.
       buckets(4)            - Maintain tn3270eRtDataBucket values in
                               a corresponding tn3270eRtDataEntry,
                               based on the bucket boundaries specified
                               in the tn3270eRtCollCtlBucketBndry
                               objects          .
       traps(5)              - generate the notifications specified
                               in this MIB module.  The
                               tn3270eRtExceeded and tn3270eRtOkay
                               notifications are generated only if
                               average(3) is also specified."
    ::= { tn3270eRtCollCtlEntry 2 }

tn3270eRtCollCtlSPeriod OBJECT-TYPE
    SYNTAX  Unsigned32 (15..86400) -- 15 second min, 24 hour max
    UNITS   "seconds"
    MAX-ACCESS   read-create
    STATUS       current
    DESCRIPTION
      "The number of seconds that defines the sample period.
       The actual interval is defined as tn3270eRtCollCtlSPeriod
       times tn3270eRtCollCtlSPMult.

       The value of this object is used only if the corresponding
       tn3270eRtCollCtlType has the average(3) setting."
    DEFVAL   {20}    -- 20 seconds

    ::= { tn3270eRtCollCtlEntry 3 }

tn3270eRtCollCtlSPMult OBJECT-TYPE
    SYNTAX  Unsigned32 (1..5760) -- 5760 x SPeriod of 15 is 24 hours
    UNITS   "period"
    MAX-ACCESS   read-create
    STATUS       current
    DESCRIPTION
      "The sample period multiplier; this value is multiplied by
      the sample period, tn3270eRtCollCtlSPeriod, to determine
      the collection interval.


      Sliding-window average calculation can, if necessary, be
      disabled, by setting the sample period multiplier,
      tn3270eRtCollCtlSPMult, to 1, and setting the sample
      period, tn3270eRtCollCtlSPeriod, to the required
      collection interval.

      The value of this object is used only if the corresponding
      tn3270eRtCollCtlType has the average(3) setting."
    DEFVAL   { 30 }    -- yields an interval of 10 minutes when
                       -- used with the default SPeriod value

    ::= { tn3270eRtCollCtlEntry 4 }

tn3270eRtCollCtlThreshHigh  OBJECT-TYPE
    SYNTAX            Unsigned32
    UNITS             "seconds"
    MAX-ACCESS        read-create
    STATUS            current
    DESCRIPTION
      "The threshold for generating a tn3270eRtExceeded
      notification, signalling that a monitored total response
      time has exceeded the specified limit.  A value of zero
      for this object suppresses generation of this notification.
      The value of this object is used only if the corresponding
      tn3270eRtCollCtlType has average(3) and traps(5) selected.

      A tn3270eRtExceeded notification is not generated again for a
      tn3270eRtDataEntry until an average response time falling below
      the low threshold tn3270eRtCollCtlThreshLow specified for the
      client group has occurred for the entry."

    DEFVAL   { 0 }   -- suppress notifications

    ::= { tn3270eRtCollCtlEntry 5 }

tn3270eRtCollCtlThreshLow   OBJECT-TYPE
    SYNTAX            Unsigned32
    UNITS             "seconds"
    MAX-ACCESS        read-create
    STATUS            current
    DESCRIPTION
      "The threshold for generating a tn3270eRtOkay notification,
      signalling that a monitored total response time has fallen
      below the specified limit.  A value of zero for this object
      suppresses generation of this notification.  The value of
      this object is used only if the corresponding
      tn3270eRtCollCtlType has average(3) and traps(5) selected.

      A tn3270eRtOkay notification is not generated again for a
      tn3270eRtDataEntry until an average response time

      exceeding the high threshold tn3270eRtCollCtlThreshHigh
      specified for the client group has occurred for the entry."
    DEFVAL   { 0 }   -- suppress notifications

    ::= { tn3270eRtCollCtlEntry 6 }

tn3270eRtCollCtlIdleCount   OBJECT-TYPE
    SYNTAX            Unsigned32
    UNITS             "transactions"
    MAX-ACCESS        read-create
    STATUS            current
    DESCRIPTION
      "The value of this object is used to determine whether a
      sample that yields an average response time exceeding the
      value of tn3270eRtCollCtlThreshHigh was a statistically
      valid one.  If the following statement is true, then the
      sample was statistically valid, and so a tn3270eRtExceeded
      notification should be generated:

        AvgCountTrans * ((AvgRt/ThreshHigh - 1) ** 2) >=  IdleCount

      This comparison is done only if the corresponding
      tn3270eRtCollCtlType has average(3) and traps(5) selected."
    DEFVAL { 1 }
    ::= { tn3270eRtCollCtlEntry 7 }

tn3270eRtCollCtlBucketBndry1   OBJECT-TYPE
    SYNTAX            Unsigned32
    UNITS             "tenths of seconds"
    MAX-ACCESS        read-create
    STATUS            current
    DESCRIPTION
      "The value of this object defines the range of transaction
       response times counted in the Tn3270eRtDataBucket1Rts
       object: those less than or equal to this value."
    DEFVAL { 10 }
    ::= { tn3270eRtCollCtlEntry 8 }

tn3270eRtCollCtlBucketBndry2   OBJECT-TYPE
    SYNTAX            Unsigned32
    UNITS             "tenths of seconds"
    MAX-ACCESS        read-create
    STATUS            current
    DESCRIPTION
      "The value of this object, together with that of the
      tn3270eRtCollCtlBucketBndry1 object, defines the range
      of transaction response times counted in the
      Tn3270eRtDataBucket2Rts object: those greater than the
      value of the tn3270eRtCollCtlBucketBndry1 object, and

      less than or equal to the value of this object."
    DEFVAL { 20 }
    ::= { tn3270eRtCollCtlEntry 9 }

tn3270eRtCollCtlBucketBndry3   OBJECT-TYPE
    SYNTAX            Unsigned32
    UNITS             "tenths of seconds"
    MAX-ACCESS        read-create
    STATUS            current
    DESCRIPTION
      "The value of this object, together with that of the
      tn3270eRtCollCtlBucketBndry2 object, defines the range of
      transaction response times counted in the
      Tn3270eRtDataBucket3Rts object:  those greater than the
      value of the tn3270eRtCollCtlBucketBndry2 object, and less
      than or equal to the value of this object."
    DEFVAL { 50 }
    ::= { tn3270eRtCollCtlEntry 10 }

tn3270eRtCollCtlBucketBndry4   OBJECT-TYPE
    SYNTAX            Unsigned32
    UNITS             "tenths of seconds"
    MAX-ACCESS        read-create
    STATUS            current
    DESCRIPTION
      "The value of this object, together with that of the
      tn3270eRtCollCtlBucketBndry3 object, defines the range
      of transaction response times counted in the
      Tn3270eRtDataBucket4Rts object: those greater than the
      value of the tn3270eRtCollCtlBucketBndry3 object, and
      less than or equal to the value of this object.

      The value of this object also defines the range of
      transaction response times counted in the
      Tn3270eRtDataBucket5Rts object: those greater than the
      value of this object."
    DEFVAL { 100 }
    ::= { tn3270eRtCollCtlEntry 11 }

tn3270eRtCollCtlRowStatus  OBJECT-TYPE
    SYNTAX            RowStatus
    MAX-ACCESS        read-create
    STATUS            current
    DESCRIPTION
      "This object allows entries to be created and deleted
       in the tn3270eRtCollCtlTable.  An entry in this table
       is deleted by setting this object to destroy(6).
       Deleting an entry in this table has the side-effect

       of removing all entries from the tn3270eRtDataTable
       that are associated with the entry being deleted."
    ::= { tn3270eRtCollCtlEntry 12 }


-- TN3270E Response Time Data Table

tn3270eRtDataTable  OBJECT-TYPE
    SYNTAX       SEQUENCE OF Tn3270eRtDataEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
      "The response time data table.  Entries in this table are
       created based on entries in the tn3270eRtCollCtlTable."
    ::= { tn3270eRtObjects 2 }

tn3270eRtDataEntry  OBJECT-TYPE
    SYNTAX        Tn3270eRtDataEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
      "Entries in this table are created based upon the
      tn3270eRtCollCtlTable.  When the corresponding
      tn3270eRtCollCtlType has aggregate(0) specified, a single
      entry is created in this table, with a tn3270eRtDataClientAddrType
      of unknown(0), a zero-length octet string value for
      tn3270eRtDataClientAddress, and a tn3270eRtDataClientPort value of
      0.  When aggregate(0) is not specified, a separate entry is
      created for each client in the group.

      Note that the following objects defined within an entry in this
      table can  wrap:
          tn3270eRtDataTotalRts
          tn3270eRtDataTotalIpRts
          tn3270eRtDataCountTrans
          tn3270eRtDataCountDrs
          tn3270eRtDataElapsRnTrpSq
          tn3270eRtDataElapsIpRtSq
          tn3270eRtDataBucket1Rts
          tn3270eRtDataBucket2Rts
          tn3270eRtDataBucket3Rts
          tn3270eRtDataBucket4Rts
          tn3270eRtDataBucket5Rts"
    INDEX {
       tn3270eSrvrConfIndex,      -- Server's local index
       tn3270eClientGroupName,    -- Collection target
       tn3270eRtDataClientAddrType,
       tn3270eRtDataClientAddress,

       tn3270eRtDataClientPort }
    ::= { tn3270eRtDataTable 1 }

Tn3270eRtDataEntry ::= SEQUENCE {
       tn3270eRtDataClientAddrType        IANATn3270eAddrType,
       tn3270eRtDataClientAddress         IANATn3270eAddress,
       tn3270eRtDataClientPort            Unsigned32,
       tn3270eRtDataAvgRt                 Gauge32,
       tn3270eRtDataAvgIpRt               Gauge32,
       tn3270eRtDataAvgCountTrans         Gauge32,
       tn3270eRtDataIntTimeStamp          DateAndTime,
       tn3270eRtDataTotalRts              Counter32,
       tn3270eRtDataTotalIpRts            Counter32,
       tn3270eRtDataCountTrans            Counter32,
       tn3270eRtDataCountDrs              Counter32,
       tn3270eRtDataElapsRndTrpSq         Unsigned32,
       tn3270eRtDataElapsIpRtSq           Unsigned32,
       tn3270eRtDataBucket1Rts            Counter32,
       tn3270eRtDataBucket2Rts            Counter32,
       tn3270eRtDataBucket3Rts            Counter32,
       tn3270eRtDataBucket4Rts            Counter32,
       tn3270eRtDataBucket5Rts            Counter32,
       tn3270eRtDataRtMethod              INTEGER,
       tn3270eRtDataDiscontinuityTime     TimeStamp
   }

tn3270eRtDataClientAddrType   OBJECT-TYPE
    SYNTAX    IANATn3270eAddrType
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
      "Indicates the type of address represented by the value
      of tn3270eRtDataClientAddress.  The value unknown(0) is
      used if aggregate data is being collected for the client
      group."
    ::= { tn3270eRtDataEntry 1 }

tn3270eRtDataClientAddress   OBJECT-TYPE
    SYNTAX    IANATn3270eAddress
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
      "Contains the IP address of the TN3270 client being
      monitored.  A zero-length octet string is used if
      aggregate data is being collected for the client group."
    ::= { tn3270eRtDataEntry 2 }

tn3270eRtDataClientPort   OBJECT-TYPE

    SYNTAX       Unsigned32(0..65535)
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
      "Contains the client port number of the TN3270 client being
      monitored.  The value 0 is used if aggregate data is being
      collected for the client group, or if the
      tn3270eRtDataClientAddrType identifies an address type that
      does not support ports."
    ::= { tn3270eRtDataEntry 3 }

tn3270eRtDataAvgRt OBJECT-TYPE
    SYNTAX       Gauge32
    UNITS        "tenths of seconds"
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
      "The average total response time measured over the last
      collection interval."
    DEFVAL { 0 }
    ::= { tn3270eRtDataEntry 4 }

tn3270eRtDataAvgIpRt OBJECT-TYPE
    SYNTAX       Gauge32
    UNITS        "tenths of seconds"
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
      "The average IP response time measured over the last
      collection interval."
    DEFVAL { 0 }
    ::= { tn3270eRtDataEntry 5 }

tn3270eRtDataAvgCountTrans   OBJECT-TYPE
    SYNTAX       Gauge32
    UNITS        "transactions"
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
      "The sliding transaction count used for calculating the
      values of the tn3270eRtDataAvgRt and tn3270eRtDataAvgIpRt
      objects.  The actual transaction count is available in
      the tn3270eRtDataCountTrans object.

      The initial value of this object, before any averages have
      been calculated, is 0."
    ::= { tn3270eRtDataEntry 6 }


tn3270eRtDataIntTimeStamp   OBJECT-TYPE
    SYNTAX       DateAndTime
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
      "The date and time of the last interval that
      tn3270eRtDataAvgRt, tn3270eRtDataAvgIpRt, and
      tn3270eRtDataAvgCountTrans were calculated.

      Prior to the calculation of the first interval
      averages, this object returns the value
      0x0000000000000000000000.  When this value is
      returned, the remaining objects in the entry have
      no significance."
    ::= { tn3270eRtDataEntry 7 }

tn3270eRtDataTotalRts   OBJECT-TYPE
    SYNTAX       Counter32
    UNITS        "tenths of seconds"
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
      "The count of the total response times collected.

      A management application can detect discontinuities in this
      counter by monitoring the tn3270eRtDataDiscontinuityTime
      object."
    ::= { tn3270eRtDataEntry 8 }

tn3270eRtDataTotalIpRts   OBJECT-TYPE
    SYNTAX       Counter32
    UNITS        "tenths of seconds"
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
      "The count of the total IP-network response times
      collected.

      A management application can detect discontinuities in this
      counter by monitoring the tn3270eRtDataDiscontinuityTime
      object."
    ::= { tn3270eRtDataEntry 9 }

tn3270eRtDataCountTrans   OBJECT-TYPE
    SYNTAX       Counter32
    UNITS        "transactions"
    MAX-ACCESS   read-only
    STATUS       current

    DESCRIPTION
      "The count of the total number of transactions detected.

      A management application can detect discontinuities in this
      counter by monitoring the tn3270eRtDataDiscontinuityTime
      object."
    ::= { tn3270eRtDataEntry 10 }

tn3270eRtDataCountDrs   OBJECT-TYPE
    SYNTAX       Counter32
    UNITS        "definite responses"
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
      "The count of the total number of definite responses
      detected.

      A management application can detect discontinuities in this
      counter by monitoring the tn3270eRtDataDiscontinuityTime
      object."
    ::= { tn3270eRtDataEntry 11 }

tn3270eRtDataElapsRndTrpSq   OBJECT-TYPE
    SYNTAX       Unsigned32
    UNITS        "tenths of seconds squared"
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
      "The sum of the elapsed round trip time squared.  The sum
      of the squares is kept in order to enable calculation of
      a variance."
    DEFVAL { 0 }
    ::= { tn3270eRtDataEntry 12 }

tn3270eRtDataElapsIpRtSq   OBJECT-TYPE
    SYNTAX       Unsigned32
    UNITS        "tenths of seconds squared"
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
      "The sum of the elapsed IP round trip time squared.
      The sum of the squares is kept in order to enable
      calculation of a variance."
    DEFVAL { 0 }
    ::= { tn3270eRtDataEntry 13 }

tn3270eRtDataBucket1Rts   OBJECT-TYPE
    SYNTAX       Counter32

    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
      "The count of the response times falling into bucket 1.

      A management application can detect discontinuities in this
      counter by monitoring the tn3270eRtDataDiscontinuityTime
      object."
    ::= { tn3270eRtDataEntry 14 }

tn3270eRtDataBucket2Rts   OBJECT-TYPE
    SYNTAX       Counter32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
      "The count of the response times falling into bucket 2.

      A management application can detect discontinuities in this
      counter by monitoring the tn3270eRtDataDiscontinuityTime
      object."
    ::= { tn3270eRtDataEntry 15 }

tn3270eRtDataBucket3Rts   OBJECT-TYPE
    SYNTAX       Counter32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
      "The count of the response times falling into bucket 3.

      A management application can detect discontinuities in this
      counter by monitoring the tn3270eRtDataDiscontinuityTime
      object."
    ::= { tn3270eRtDataEntry 16 }

tn3270eRtDataBucket4Rts  OBJECT-TYPE
    SYNTAX       Counter32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
      "The count of the response times falling into bucket 4.

      A management application can detect discontinuities in this
      counter by monitoring the tn3270eRtDataDiscontinuityTime
      object."
    ::= { tn3270eRtDataEntry 17 }

tn3270eRtDataBucket5Rts  OBJECT-TYPE
    SYNTAX       Counter32

    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
      "The count of the response times falling into bucket 5.

      A management application can detect discontinuities in this
      counter by monitoring the tn3270eRtDataDiscontinuityTime
      object."
    ::= { tn3270eRtDataEntry 18 }

tn3270eRtDataRtMethod OBJECT-TYPE
    SYNTAX       INTEGER {
                           none(0),
                           responses(1),
                           timingMark(2)
                         }
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
      "The value of this object indicates the method that was
      used in calculating the IP network time.

      The value 'none(0) indicates that response times were not
      calculated for the IP network."
    ::= { tn3270eRtDataEntry 19 }

tn3270eRtDataDiscontinuityTime OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sysUpTime on the most recent occasion at
        which one or more of this entry's counter objects
        suffered a discontinuity.  This may happen if a TN3270E
        server is stopped and then restarted, and local methods
        are used to set up collection policy
        (tn3270eRtCollCtlTable entries)."
    ::= { tn3270eRtDataEntry 20 }


tn3270eRtSpinLock OBJECT-TYPE
    SYNTAX      TestAndIncr
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
      "An advisory lock used to allow cooperating TN3270E-RT-MIB
      applications to coordinate their use of the
      tn3270eRtCollCtlTable.

      When creating a new entry or altering an existing entry
      in the tn3270eRtCollCtlTable, an application should make
      use of tn3270eRtSpinLock to serialize application changes
      or additions.

      Since this is an advisory lock, the use of this lock is
      not enforced."
    ::= { tn3270eRtObjects 3 }

-- Notifications

tn3270eRtExceeded   NOTIFICATION-TYPE
    OBJECTS {
       tn3270eRtDataIntTimeStamp,
       tn3270eRtDataAvgRt,
       tn3270eRtDataAvgIpRt,
       tn3270eRtDataAvgCountTrans,
       tn3270eRtDataRtMethod
    }
    STATUS  current
    DESCRIPTION
      "This notification is generated when the average response
      time, tn3270eRtDataAvgRt, exceeds
      tn3270eRtCollCtlThresholdHigh at the end of a collection
      interval specified by tn3270eCollCtlSPeriod
      times tn3270eCollCtlSPMult.  Note that the corresponding
      tn3270eCollCtlType must have traps(5) and average(3) set
      for this notification to be generated.  In addition,
      tn3270eRtDataAvgCountTrans, tn3270eRtCollCtlThreshHigh, and
      tn3270eRtDataAvgRt are algorithmically compared to
      tn3270eRtCollCtlIdleCount for determination if this
      notification will be suppressed."
    ::= { tn3270eRtNotifications 1 }

tn3270eRtOkay   NOTIFICATION-TYPE
    OBJECTS {
       tn3270eRtDataIntTimeStamp,
       tn3270eRtDataAvgRt,
       tn3270eRtDataAvgIpRt,
       tn3270eRtDataAvgCountTrans,
       tn3270eRtDataRtMethod
    }
    STATUS  current
    DESCRIPTION
      "This notification is generated when the average response
      time, tn3270eRtDataAvgRt, falls below
      tn3270eRtCollCtlThresholdLow at the end of a collection
      interval specified by tn3270eCollCtlSPeriod times

      tn3270eCollCtlSPMult, after a tn3270eRtExceeded
      notification was generated.  Note that the corresponding
      tn3270eCollCtlType must have traps(5) and average(3)
      set for this notification to be generated."
    ::= { tn3270eRtNotifications 2 }

tn3270eRtCollStart NOTIFICATION-TYPE
    OBJECTS {
       tn3270eRtDataRtMethod,       -- type of collection
       tn3270eResMapElementType     -- type of resource
    }
    STATUS  current
    DESCRIPTION
      "This notification is generated when response time data
      collection is enabled for a member of a client group.
      In order for this notification to occur the corresponding
      tn3270eRtCollCtlType must have traps(5) selected.

      tn3270eResMapElementType contains a valid value only if
      tn3270eRtDataClientAddress contains a valid address
      (rather than a zero-length octet string)."
    ::= { tn3270eRtNotifications 3 }

tn3270eRtCollEnd   NOTIFICATION-TYPE
    OBJECTS {
       tn3270eRtDataDiscontinuityTime,
       tn3270eRtDataAvgRt,
       tn3270eRtDataAvgIpRt,
       tn3270eRtDataAvgCountTrans,
       tn3270eRtDataIntTimeStamp,
       tn3270eRtDataTotalRts,
       tn3270eRtDataTotalIpRts,
       tn3270eRtDataCountTrans,
       tn3270eRtDataCountDrs,
       tn3270eRtDataElapsRndTrpSq,
       tn3270eRtDataElapsIpRtSq,
       tn3270eRtDataBucket1Rts,
       tn3270eRtDataBucket2Rts,
       tn3270eRtDataBucket3Rts,
       tn3270eRtDataBucket4Rts,
       tn3270eRtDataBucket5Rts,
       tn3270eRtDataRtMethod
    }
    STATUS  current
    DESCRIPTION
      "This notification is generated when an tn3270eRtDataEntry
      is deleted after being active (actual data collected), in
      order to enable a management application monitoring an

      tn3270eRtDataEntry to get the entry's final values.  Note
      that the corresponding tn3270eCollCtlType must have traps(5)
      set for this notification to be generated."
    ::= { tn3270eRtNotifications 4 }

-- Conformance Statement

tn3270eRtGroups       OBJECT IDENTIFIER ::= { tn3270eRtConformance 1 }
tn3270eRtCompliances  OBJECT IDENTIFIER ::= { tn3270eRtConformance 2 }

-- Compliance statements

tn3270eRtCompliance     MODULE-COMPLIANCE
    STATUS current
    DESCRIPTION
      "The compliance statement for agents that support the
      TN327E-RT-MIB."
    MODULE   -- this module
       MANDATORY-GROUPS { tn3270eRtGroup, tn3270eRtNotGroup }

    OBJECT tn3270eRtCollCtlType
       MIN-ACCESS  read-only
       DESCRIPTION
          "The agent is not required to support a SET operation to
          this object in the absence of adequate security."

    OBJECT tn3270eRtCollCtlSPeriod
       MIN-ACCESS  read-only
       DESCRIPTION
          "The agent is not required to allow the user to change
          the default value of this object, and is allowed to
          use a different default."

    OBJECT tn3270eRtCollCtlSPMult
       MIN-ACCESS  read-only
       DESCRIPTION
          "The agent is not required to support a SET operation
          to this object in the absence of adequate security."

    OBJECT tn3270eRtCollCtlThreshHigh
       MIN-ACCESS  read-only
       DESCRIPTION
          "The agent is not required to support a SET operation
          to this object in the absence of adequate security."

    OBJECT tn3270eRtCollCtlThreshLow
       MIN-ACCESS  read-only
       DESCRIPTION

          "The agent is not required to support a SET operation
          to this object in the absence of adequate security."

    OBJECT tn3270eRtCollCtlIdleCount
       MIN-ACCESS  read-only
       DESCRIPTION
          "The agent is not required to support a SET operation
          to this object in the absence of adequate security."

    OBJECT tn3270eRtCollCtlBucketBndry1
       MIN-ACCESS  read-only
       DESCRIPTION
          "The agent is not required to support a SET operation
          to this object in the absence of adequate security."

    OBJECT tn3270eRtCollCtlBucketBndry2
       MIN-ACCESS  read-only
       DESCRIPTION
          "The agent is not required to support a SET operation
          to this object in the absence of adequate security."

    OBJECT tn3270eRtCollCtlBucketBndry3
       MIN-ACCESS  read-only
       DESCRIPTION
          "The agent is not required to support a SET operation
          to this object in the absence of adequate security."

    OBJECT tn3270eRtCollCtlBucketBndry4
       MIN-ACCESS  read-only
       DESCRIPTION
          "The agent is not required to support a SET operation
          to this object in the absence of adequate security."

    OBJECT tn3270eRtCollCtlRowStatus
       SYNTAX   INTEGER {
                         active(1) -- subset of RowStatus
                        }
       MIN-ACCESS read-only
       DESCRIPTION
          "Write access is not required, and only one of the six
          enumerated values for the RowStatus textual convention
          need be supported, specifically: active(1)."

    ::= {tn3270eRtCompliances 1 }

-- Group definitions

tn3270eRtGroup         OBJECT-GROUP

    OBJECTS {
        tn3270eRtCollCtlType,
        tn3270eRtCollCtlSPeriod,
        tn3270eRtCollCtlSPMult,
        tn3270eRtCollCtlThreshHigh,
        tn3270eRtCollCtlThreshLow,
        tn3270eRtCollCtlIdleCount,
        tn3270eRtCollCtlBucketBndry1,
        tn3270eRtCollCtlBucketBndry2,
        tn3270eRtCollCtlBucketBndry3,
        tn3270eRtCollCtlBucketBndry4,
        tn3270eRtCollCtlRowStatus,
        tn3270eRtDataDiscontinuityTime,
        tn3270eRtDataAvgRt,
        tn3270eRtDataAvgIpRt,
        tn3270eRtDataAvgCountTrans,
        tn3270eRtDataIntTimeStamp,
        tn3270eRtDataTotalRts,
        tn3270eRtDataTotalIpRts,
        tn3270eRtDataCountTrans,
        tn3270eRtDataCountDrs,
        tn3270eRtDataElapsRndTrpSq,
        tn3270eRtDataElapsIpRtSq,
        tn3270eRtDataBucket1Rts,
        tn3270eRtDataBucket2Rts,
        tn3270eRtDataBucket3Rts,
        tn3270eRtDataBucket4Rts,
        tn3270eRtDataBucket5Rts,
        tn3270eRtDataRtMethod,
        tn3270eRtSpinLock }
    STATUS  current
    DESCRIPTION
      "This group is mandatory for all implementations that
      support the TN3270E-RT-MIB. "
    ::= { tn3270eRtGroups 1 }

tn3270eRtNotGroup         NOTIFICATION-GROUP
    NOTIFICATIONS {
        tn3270eRtExceeded,
        tn3270eRtOkay,
        tn3270eRtCollStart,
        tn3270eRtCollEnd
     }






    STATUS  current
    DESCRIPTION
      "The notifications that must be supported when the
      TN3270E-RT-MIB is implemented. "
    ::= { tn3270eRtGroups 2 }

END