CISCO-WAN-TRAP-VARS-MIB.mib object
Introduction
Most network devices and programs ship with so-called MIB files to describe the parameters and meanings (i.e.: friendly names) which are available for monitoring via SNMP.
ActiveXperts Network Monitor 2025 can import vendor-specific MIB files, so it can be used to monitor specific OID's (Object Identifiers).
This way, you can monitor your devices, computers, etc. by selecting your relevant OID's by name.
ActiveXperts Network Monitor 2025 can import MIB file CISCO-WAN-TRAP-VARS-MIB and use it to monitor vendor specific OID's.
CISCO-WAN-TRAP-VARS-MIB file content
Object view of CISCO-WAN-TRAP-VARS-MIB:
  
    
      | Scalar Object | 
  
  
    
      | cwTrapIndex | .1.3.6.1.4.1.351.150.5.1.1.1 | 
    
      | The object containing the value which can be used
        for indexing to any table. | 
    
      | cwTrapSlotNumber | .1.3.6.1.4.1.351.150.5.1.1.2 | 
    
      | This object contains the slot number of the module. | 
    
      | cwTrapPhysicalVendorType | .1.3.6.1.4.1.351.150.5.1.1.3 | 
    
      | This object contains the entPhysicalVendorType value
        for the physical entity. | 
    
      | cwTrapLineModuleNumber | .1.3.6.1.4.1.351.150.5.1.1.4 | 
    
      | This object contains the value for entPhysicalParentRelPos
        object for line modules. | 
    
      | cwTrapOctetString | .1.3.6.1.4.1.351.150.5.1.1.5 | 
    
      | This object contains the octet string value. | 
    
      | cwTrapDisplayString | .1.3.6.1.4.1.351.150.5.1.1.6 | 
    
      | This object contains the display string value. | 
    
      | cwTrapPhysicalContainer | .1.3.6.1.4.1.351.150.5.1.1.7 | 
    
      | This object contains the container(parent unit number) number of
        an entity in entPhysicalTable. This object contains the value
        for the following entities:
        Fan   Tray
        Power Supply Tray/Group.
        If it contains value zero, then this object is not applicable
        for the entity identified by cwTrapPhysicalUnit. | 
    
      | cwTrapPhysicalUnit | .1.3.6.1.4.1.351.150.5.1.1.8 | 
    
      | This object contains the physical unit number(Relative Position)
        of the physical entity. The physical unit number depends upon
        the value specified in cwTrapPhysicalContainer object. | 
    
      | cwTrapCardRole | .1.3.6.1.4.1.351.150.5.1.1.9 | 
    
      | This object indicates the card role change to
        T1 from E1, or T3 from E3, vice versa. In case of a card
        with multiple roles, this object only indicates the changeable
        role swap between T1 and E1, or T3 and E3. | 
    
      | cwTrapSctCardType | .1.3.6.1.4.1.351.150.5.1.1.10 | 
    
      | This object is used only for traps and represents the
        cwSctCardType object in CISCO-WAN-SCT-MGMT-MIB.my. | 
    
      | cwTrapSctType | .1.3.6.1.4.1.351.150.5.1.1.11 | 
    
      | This object is used only for traps and represents the
        cwSctType object in CISCO-WAN-SCT-MGMT-MIB.my. | 
    
      | cwTrapSctId | .1.3.6.1.4.1.351.150.5.1.1.12 | 
    
      | This object is used only for traps and represents the cwSctId
        object in CISCO-WAN-SCT-MGMT-MIB.my. | 
    
      | cwTrapSctMajorVersion | .1.3.6.1.4.1.351.150.5.1.1.13 | 
    
      | This object is used only for traps and represents the
        cwSctMajorVersion object in CISCO-WAN-SCT-MGMT-MIB.my. | 
    
      | cwTrapVarLength | .1.3.6.1.4.1.351.150.5.1.1.14 | 
    
      | This is an object used only for traps and contains
        a value for the length of another object.
        For instance, this can be the length of
        an address. | 
    
      | cwTrapAtmAddressType | .1.3.6.1.4.1.351.150.5.1.1.15 | 
    
      | This object is used only for traps and represents
        the type of an ATM addresses. | 
    
      | cwTrapReference | .1.3.6.1.4.1.351.150.5.1.1.16 | 
    
      | This object is used only for traps and represents an object
        of the same SYNTAX. This object is used in place of:
        a) 'cwapReference' in CISCO-WAN-ATM-PARTY-MIB.my. | 
    
      | cwTrapSecondIndex | .1.3.6.1.4.1.351.150.5.1.1.17 | 
    
      | The object containing the value which can be used
        for indexing to any table. | 
    
      | cwTrapThirdIndex | .1.3.6.1.4.1.351.150.5.1.1.18 | 
    
      | The object containing the value which can be used
        for indexing to any table. | 
  
  
    
      | Object Identifier | 
  
  
    
      | ciscoWanTrapVarsMIB | .1.3.6.1.4.1.351.150.5 | 
    
      | This MIB module is for Supporting Varbinds used only
        in trap defintions. The NMS applications should not
        depend on the implementation of these objects.The
        SNMP Requests(GET,GET-NEXT) may not be valid for
        these objects. | 
    
      | cwTrapVarMIBObjects | .1.3.6.1.4.1.351.150.5.1 | 
    
      | cwTrapVars | .1.3.6.1.4.1.351.150.5.1.1 | 
    
      | cwTrapVarsMIBConformance | .1.3.6.1.4.1.351.150.5.2 | 
    
      | cwTrapVarsMIBCompliances | .1.3.6.1.4.1.351.150.5.2.1 | 
    
      | cwTrapVarsMIBGroups | .1.3.6.1.4.1.351.150.5.2.2 | 
  
  
    
      | Group | 
  
  
    
      | cwTrapVarsTrapGroup | .1.3.6.1.4.1.351.150.5.2.2.1 | 
    
      | The collection of objects which are used only
        in trap varbinds. | 
    
      | cwTrapVarsTrapGroup2 | .1.3.6.1.4.1.351.150.5.2.2.2 | 
    
      | The collection of objects which are used only
        in trap varbinds. | 
    
      | cwTrapVarsTrapGroup3 | .1.3.6.1.4.1.351.150.5.2.2.3 | 
    
      | The collection of objects which are used only
        in trap varbinds. | 
    
      | cwTrapVarsTrapGroup4 | .1.3.6.1.4.1.351.150.5.2.2.4 | 
    
      | The collection of objects which are used only
        in trap varbinds. | 
    
      | cwTrapVarsTrapGroup5 | .1.3.6.1.4.1.351.150.5.2.2.5 | 
    
      | The collection of objects which are used only
        in trap varbinds. |