ActiveXperts Network Monitor 2019##AdminFavorites

Wellfleet-IPACCT-MIB.mib object view, vendor Wellfleet

Introduction

Most network devices and programs ship with so-called MIB files to describe the parameters and meanings (i.e.: friendly names) which are available for monitoring via SNMP.
ActiveXperts Network Monitor 2019 can import vendor-specific MIB files, so it can be used to monitor specific OID's (Object Identifiers). This way, you can monitor your devices, computers, etc. by selecting your relevant OID's by name.

ActiveXperts Network Monitor 2019 can import MIB file Wellfleet-IPACCT-MIB and use it to monitor vendor specific OID's.

Wellfleet-IPACCT-MIB file content

Object view of Wellfleet-IPACCT-MIB:

Scalar Object
wfIpAcctBaseCreate .1.3.6.1.4.1.18.3.5.20.1.1.1
Create/Delete parameter. Default is created. Users perform a set operation on this object in order to create/delete IP_ACCT.
wfIpAcctBaseEnable .1.3.6.1.4.1.18.3.5.20.1.1.2
Enable/Disable parameter. Default is enabled. Users perform a set operation on this object in order to enable/disable IP_ACCT.
wfIpAcctBaseThreshold .1.3.6.1.4.1.18.3.5.20.1.1.3
The max number of entries in the IP accounting table
wfIpAcctBaseTransitCount .1.3.6.1.4.1.18.3.5.20.1.1.4
Number of transit entries to be accounted for that do not match the access-list src-dest pairs
wfIpAcctBaseTrapPercent .1.3.6.1.4.1.18.3.5.20.1.1.5
When this % of table entries are counted a trap is sent to the TI console
wfIpAcctAge .1.3.6.1.4.1.18.3.5.20.1.1.6
Number of ticks (seconds) since the 1st entry in the accounting table
wfIpCkAcctFlag .1.3.6.1.4.1.18.3.5.20.1.1.7
This is set when user wants to make a snapshot of the active table into the checkpoint table
wfIpCkAcctAge .1.3.6.1.4.1.18.3.5.20.1.1.8
Number of clock ticks since the first entry in the checkpoint accounting table
wfIpAcctTableEntry .1.3.6.1.4.1.18.3.5.20.1.2.1
A src-dest based entry in the table
wfIpAcctCctTableEntry .1.3.6.1.4.1.18.3.5.20.1.3.1
An IP accounting circuit definition
wfIpCkAcctTableEntry .1.3.6.1.4.1.18.3.5.20.1.4.1
A src-dest based entry in the checkpoint table
Tabular Object
wfIpAcctTableSrcAddr .1.3.6.1.4.1.18.3.5.20.1.2.1.1
Source IP address of Packet
wfIpAcctTableDestAddr .1.3.6.1.4.1.18.3.5.20.1.2.1.2
Dest IP address of Packet
wfIpAcctTablePkts .1.3.6.1.4.1.18.3.5.20.1.2.1.3
Number of pkts with this src-dest address pair
wfIpAcctTableBytes .1.3.6.1.4.1.18.3.5.20.1.2.1.4
Number of bytes with this src-dest address pair
wfIpAcctCctNum .1.3.6.1.4.1.18.3.5.20.1.3.1.3
The Circuit Number that this interface runs over
wfIpAcctCctDelete .1.3.6.1.4.1.18.3.5.20.1.3.1.1
Create/Delete parameter. Default is created. Users perform a set operation on this object in order to create/delete an IP accounting interface.
wfIpAcctCctDisable .1.3.6.1.4.1.18.3.5.20.1.3.1.2
Enable/Disable parameter. Default is enabled. Users perform a set operation on this object in order to enable/disable an IP accounting on an interface.
wfIpCkAcctTableSrcAddr .1.3.6.1.4.1.18.3.5.20.1.4.1.1
Source IP address of Packet in checkpoint table
wfIpCkAcctTableDestAddr .1.3.6.1.4.1.18.3.5.20.1.4.1.2
Dest IP address of Packet in checkpoint table
wfIpCkAcctTablePkts .1.3.6.1.4.1.18.3.5.20.1.4.1.3
Number of pkts with this src-dest address pair in checkpoint table
wfIpCkAcctTableBytes .1.3.6.1.4.1.18.3.5.20.1.4.1.4
Number of bytes with this src-dest address pair in checkpoint table
Table
wfIpAcctTable .1.3.6.1.4.1.18.3.5.20.1.2
A list of elements in the IP accounting table
wfIpAcctCctTable .1.3.6.1.4.1.18.3.5.20.1.3
List of interfaces - circuits configured with IP accounting
wfIpCkAcctTable .1.3.6.1.4.1.18.3.5.20.1.4
A list of elements in the IP checkpoint accounting table
Object Identifier
wfIpAcctGroup .1.3.6.1.4.1.18.3.5.20.1
wfIpAcctBase .1.3.6.1.4.1.18.3.5.20.1.1