AD | Application | AWS | Azure | Cloud | Database | Enterprise | Environmental | Event Log | File System | Infra | IoT | IT Service | Linux | Network/System | Performance | Protocol | SaaS | Security | Service Level | SNMP | Storage | VMware | VoIP | Web | Wireless

Crumbtrail

MonitorTools.com » Technical documentation » SNMP » MIB » Wellfleet » Wellfleet-RF-MIB » Objects

Wellfleet-RF-MIB.mib object view, vendor Wellfleet

Introduction

Most network devices and programs ship with so-called MIB files to describe the parameters and meanings (i.e.: friendly names) which are available for monitoring via SNMP.
ActiveXperts Network Monitor 2024 can import vendor-specific MIB files, so it can be used to monitor specific OID's (Object Identifiers). This way, you can monitor your devices, computers, etc. by selecting your relevant OID's by name.

ActiveXperts Network Monitor 2024 can import MIB file Wellfleet-RF-MIB and use it to monitor vendor specific OID's.

Wellfleet-RF-MIB file content

Object view of Wellfleet-RF-MIB:

Scalar Object
wfIpRfRipImportEntry .1.3.6.1.4.1.18.3.5.3.2.1.8.1
An entry in the Rip Import Rule Table
wfIpRfRipExportEntry .1.3.6.1.4.1.18.3.5.3.2.1.9.1
An entry in the Rip Export Rule Table
wfIpRfOspfImportEntry .1.3.6.1.4.1.18.3.5.3.2.1.10.1
An entry in the OSPF Import Route Filter Table
wfIpRfOspfExportEntry .1.3.6.1.4.1.18.3.5.3.2.1.11.1
An entry in the OSPF Export Route Filter Table
wfIpRfEgpImportEntry .1.3.6.1.4.1.18.3.5.3.2.1.12.1
An entry in the Egp Import Rule Table
wfIpRfEgpExportEntry .1.3.6.1.4.1.18.3.5.3.2.1.13.1
An entry in the Egp Export Rule Table
wfIpRfBgp3ImportEntry .1.3.6.1.4.1.18.3.5.3.2.1.14.1
An entry in the BGP-3 Import Rule Table
wfIpRfBgp3ExportEntry .1.3.6.1.4.1.18.3.5.3.2.1.15.1
An entry in the BGP-3 Export Rule Table
Tabular Object
wfIpRfRipImportAddress .1.3.6.1.4.1.18.3.5.3.2.1.8.1.3
The IP address to which this filter applies
wfIpRfRipImportMask .1.3.6.1.4.1.18.3.5.3.2.1.8.1.4
The Mask to which this filter applies. When combined with the Address, a range is specified for application of this rule
wfIpRfRipImportRipGateway .1.3.6.1.4.1.18.3.5.3.2.1.8.1.7
The RIP Gateway to be concerned with
wfIpRfRipImportRipInterface .1.3.6.1.4.1.18.3.5.3.2.1.8.1.8
The IP Network Interface to be concerned with
wfIpRfRipImportCreate .1.3.6.1.4.1.18.3.5.3.2.1.8.1.1
Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete this Rule.
wfIpRfRipImportEnable .1.3.6.1.4.1.18.3.5.3.2.1.8.1.2
Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable this Rule.
wfIpRfRipImportAction .1.3.6.1.4.1.18.3.5.3.2.1.8.1.5
The Action of this Filter
wfIpRfRipImportPreference .1.3.6.1.4.1.18.3.5.3.2.1.8.1.6
The Preference associated with this filter - only valid if accept
wfIpRfRipImportApplyMask .1.3.6.1.4.1.18.3.5.3.2.1.8.1.9
The Mask to apply to this route learned instead of the default. NULL means to apply the normal filter
wfIpRfRipExportAddress .1.3.6.1.4.1.18.3.5.3.2.1.9.1.3
The IP address to which this filter applies
wfIpRfRipExportMask .1.3.6.1.4.1.18.3.5.3.2.1.9.1.4
The Mask for the Address Above. When combined with the Address, a range is specified for application of this filter rule
wfIpRfRipExportFromProtocol .1.3.6.1.4.1.18.3.5.3.2.1.9.1.5
The protocol from which this Information is derived
wfIpRfRipExportInterface .1.3.6.1.4.1.18.3.5.3.2.1.9.1.7
The optional outbound interface on which to apply this filter
wfIpRfRipExportCreate .1.3.6.1.4.1.18.3.5.3.2.1.9.1.1
Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete this Rule.
wfIpRfRipExportEnable .1.3.6.1.4.1.18.3.5.3.2.1.9.1.2
Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable this Rule.
wfIpRfRipExportAction .1.3.6.1.4.1.18.3.5.3.2.1.9.1.6
The action of this export filter; if IP_RF_RIP_EXP_ACTION_AGGREGATE action, the default route, 0.0.0.0, is advertised instead networks that match this filter
wfIpRfRipExportRipMetric .1.3.6.1.4.1.18.3.5.3.2.1.9.1.8
The optional export RIP metric to apply to this filter. Zero means: use the route's actual cost. Only valid for propagate
wfIpRfOspfImportAddress .1.3.6.1.4.1.18.3.5.3.2.1.10.1.3
The IP Address to which this filter applies
wfIpRfOspfImportMask .1.3.6.1.4.1.18.3.5.3.2.1.10.1.4
The Mask to which this filter applies. When combined with the Address, a range is specified for application of this rule
wfIpRfOspfImportType .1.3.6.1.4.1.18.3.5.3.2.1.10.1.7
The OSPF route Type to be concerned with. The valid values are null (any route type), 1 (OSPF external type 1), and 2 (OSPF external type 2).
wfIpRfOspfImportTag .1.3.6.1.4.1.18.3.5.3.2.1.10.1.8
The OSPF Tag to be concerned with
wfIpRfOspfImportCreate .1.3.6.1.4.1.18.3.5.3.2.1.10.1.1
Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete this Rule.
wfIpRfOspfImportEnable .1.3.6.1.4.1.18.3.5.3.2.1.10.1.2
Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable this Rule.
wfIpRfOspfImportAction .1.3.6.1.4.1.18.3.5.3.2.1.10.1.5
The Action of this Filter
wfIpRfOspfImportPreference .1.3.6.1.4.1.18.3.5.3.2.1.10.1.6
The Preference associated with this filter - only valid if accept
wfIpRfOspfExportAddress .1.3.6.1.4.1.18.3.5.3.2.1.11.1.3
The IP address to which this filter applies
wfIpRfOspfExportMask .1.3.6.1.4.1.18.3.5.3.2.1.11.1.4
The Mask for the Address Above. When combined with the Address, a range is specified for application of this filter rule
wfIpRfOspfExportFromProtocol .1.3.6.1.4.1.18.3.5.3.2.1.11.1.5
The protocol from which this Information is derived
wfIpRfOspfExportCreate .1.3.6.1.4.1.18.3.5.3.2.1.11.1.1
Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete this Rule.
wfIpRfOspfExportEnable .1.3.6.1.4.1.18.3.5.3.2.1.11.1.2
Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable this Rule.
wfIpRfOspfExportAction .1.3.6.1.4.1.18.3.5.3.2.1.11.1.6
The action of this export filter
wfIpRfOspfExportType .1.3.6.1.4.1.18.3.5.3.2.1.11.1.7
The ospf type to use when this filter matches
wfIpRfOspfExportTag .1.3.6.1.4.1.18.3.5.3.2.1.11.1.8
The ospf tag to use when this filter matches
wfIpRfOspfExportAutoTag .1.3.6.1.4.1.18.3.5.3.2.1.11.1.9
BGP/OSPF automatic tag generation: if enabled, a tag will be generated according to the criteria in RFC 1364. Only valid if wfIpRfOspfExportType is set. If enabled, wfIpRfOspfExportTag is ignored.
wfIpRfEgpImportAddress .1.3.6.1.4.1.18.3.5.3.2.1.12.1.3
The advertised network to which this filter applies
wfIpRfEgpImportPeer .1.3.6.1.4.1.18.3.5.3.2.1.12.1.7
The Egp Peer to be to be concerned with
wfIpRfEgpImportAs .1.3.6.1.4.1.18.3.5.3.2.1.12.1.8
The Autonomous System number to be concerned with
wfIpRfEgpImportGateway .1.3.6.1.4.1.18.3.5.3.2.1.12.1.9
The EGP gateway to be concerned with
wfIpRfEgpImportCreate .1.3.6.1.4.1.18.3.5.3.2.1.12.1.1
Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete this Rule.
wfIpRfEgpImportEnable .1.3.6.1.4.1.18.3.5.3.2.1.12.1.2
Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable this Rule.
wfIpRfEgpImportMask .1.3.6.1.4.1.18.3.5.3.2.1.12.1.4
The Mask of the Address to which this filter applies.
wfIpRfEgpImportAction .1.3.6.1.4.1.18.3.5.3.2.1.12.1.5
The Action of this Filter
wfIpRfEgpImportPreference .1.3.6.1.4.1.18.3.5.3.2.1.12.1.6
The Preference associated with this filter - only valid if accept
wfIpRfEgpExportAddress .1.3.6.1.4.1.18.3.5.3.2.1.13.1.3
The advertised network to which this filter applies
wfIpRfEgpExportMask .1.3.6.1.4.1.18.3.5.3.2.1.13.1.4
The Mask of the Address to which this filter applies.
wfIpRfEgpExportFromProtocol .1.3.6.1.4.1.18.3.5.3.2.1.13.1.5
The protocol from which this Information is derived
wfIpRfEgpExportPeer .1.3.6.1.4.1.18.3.5.3.2.1.13.1.7
The Egp Peer to be to be concerned with
wfIpRfEgpExportOspfType .1.3.6.1.4.1.18.3.5.3.2.1.13.1.8
The type of route being filtered. This field is only valid if the wfIpRfEgpExportFromProtocol is OSPF. Otherwise, the field is 0.
wfIpRfEgpExportOspfTag .1.3.6.1.4.1.18.3.5.3.2.1.13.1.9
The tag of the route being filtered. This field is only valid if the wfIpRfEgpExportFromProtocol is OSPF. Otherwise, this field is 0.
wfIpRfEgpExportCreate .1.3.6.1.4.1.18.3.5.3.2.1.13.1.1
Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete this Rule.
wfIpRfEgpExportEnable .1.3.6.1.4.1.18.3.5.3.2.1.13.1.2
Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable this Rule.
wfIpRfEgpExportAction .1.3.6.1.4.1.18.3.5.3.2.1.13.1.6
The action of this export filter
wfIpRfEgpExportInterface .1.3.6.1.4.1.18.3.5.3.2.1.13.1.10
The optional outbound interface on which to apply this filter
wfIpRfEgpExportMetric .1.3.6.1.4.1.18.3.5.3.2.1.13.1.11
The optional export Egp metric to apply to this filter. Zero means: use the route's actual cost. Only valid for propagate
wfIpRfBgp3ImportAddress .1.3.6.1.4.1.18.3.5.3.2.1.14.1.3
The advertised network to which this filter applies. Zero implies `all networks' or the default route, based on wfIpRfBgp3ImportMask.
wfIpRfBgp3ImportMask .1.3.6.1.4.1.18.3.5.3.2.1.14.1.4
The mask applied to wfIpRfBgp3ImportAddress. If zero, this filter applies to all networks. If the address is zero and this parameter is 255.255.255.255, this filter applies to the default route.
wfIpRfBgp3ImportPeerAs .1.3.6.1.4.1.18.3.5.3.2.1.14.1.7
The BGP-3 Peer's AS number (or zero if `any AS')
wfIpRfBgp3ImportPeerAddress .1.3.6.1.4.1.18.3.5.3.2.1.14.1.8
The IP address (not the peer ID) of the peer that this advertisement was received from (zero if `any peer')
wfIpRfBgp3ImportOrigAs .1.3.6.1.4.1.18.3.5.3.2.1.14.1.9
The AS number of the BGP-3 gateway that originated the route (or zero for `any AS')
wfIpRfBgp3ImportRouteOrigin .1.3.6.1.4.1.18.3.5.3.2.1.14.1.10
A value for the ORIGIN path attribute (or zero if not applicable)
wfIpRfBgp3ImportCreate .1.3.6.1.4.1.18.3.5.3.2.1.14.1.1
Create/Delete parameter. if set to delete, the rule is removed.
wfIpRfBgp3ImportEnable .1.3.6.1.4.1.18.3.5.3.2.1.14.1.2
Enable/Disable parameter. controls whether the rule is enabled or disabled.
wfIpRfBgp3ImportAction .1.3.6.1.4.1.18.3.5.3.2.1.14.1.5
The Action of this Filter
wfIpRfBgp3ImportPreference .1.3.6.1.4.1.18.3.5.3.2.1.14.1.6
The Preference associated with this filter - only valid if accept
wfIpRfBgp3ImportBgp3Preference .1.3.6.1.4.1.18.3.5.3.2.1.14.1.11
The Preference associated with this filter for comparison to other BGP routes only - only valid if accept
wfIpRfBgp3ExportAddress .1.3.6.1.4.1.18.3.5.3.2.1.15.1.3
The advertised network to which this filter applies. Zero implies `all networks' or the default route, based on wfIpRfBgp3ExportMask.
wfIpRfBgp3ExportMask .1.3.6.1.4.1.18.3.5.3.2.1.15.1.4
The mask applied to wfIpRfBgp3ExportAddress. If zero, this filter applies to all networks. If the address is zero and this parameter is 255.255.255.255, this filter applies to the default route.
wfIpRfBgp3ExportFromProtocol .1.3.6.1.4.1.18.3.5.3.2.1.15.1.5
The protocol from which this Information is derived
wfIpRfBgp3ExportPeerAs .1.3.6.1.4.1.18.3.5.3.2.1.15.1.7
The AS number to which the network advertisement is going (zero if `any AS')
wfIpRfBgp3ExportPeerAddress .1.3.6.1.4.1.18.3.5.3.2.1.15.1.8
The IP address (not the peer ID) of the peer that this advertisement is going to (zero if `any peer')
wfIpRfBgp3ExportOspfType .1.3.6.1.4.1.18.3.5.3.2.1.15.1.9
The type of route being filtered. This field is only valid if the wfIpRfEgpExportFromProtocol is OSPF. Otherwise, the field is 0.
wfIpRfBgp3ExportOspfTag .1.3.6.1.4.1.18.3.5.3.2.1.15.1.10
The OSPF tag of the route being filtered. This field is only valid if the wfIpRfBgp3ExportFromProtocol is OSPF and wfIpRfBgp3ExportOspfType is external type 1 or 2. Otherwise, this field is 0.
wfIpRfBgp3ExportCreate .1.3.6.1.4.1.18.3.5.3.2.1.15.1.1
Create/Delete: if set to delete, the rule is removed
wfIpRfBgp3ExportEnable .1.3.6.1.4.1.18.3.5.3.2.1.15.1.2
Enable/Disable: controls whether the rule is enabled or disabled
wfIpRfBgp3ExportAction .1.3.6.1.4.1.18.3.5.3.2.1.15.1.6
The action of this export filter; if IP_RF_BGP3_EXP_ACTION_AGGREGATE action, the default route, 0.0.0.0, is advertised instead networks that match this filter
wfIpRfBgp3ExportUseMetric .1.3.6.1.4.1.18.3.5.3.2.1.15.1.11
Determines whether or not an INTER_AS_METRIC will be advertised for the associated network(s). none (1) indicates that no metric will be advertised. specified (2) indicates that the value in wfIpRfBgp3ExportInterAsMetric will be used. originating (3) indicates that the metric from the originating protocol will be used. Only valid for propagate.
wfIpRfBgp3ExportInterAsMetric .1.3.6.1.4.1.18.3.5.3.2.1.15.1.12
If wfIpRfBgp3ExportUseMetric is set to specified (2), this is the value that will be used for the INTER_AS_METRIC. Only valid for propagate.
wfIpRfBgp3ExportOrigin .1.3.6.1.4.1.18.3.5.3.2.1.15.1.13
The value to use for the ORIGIN path attribute when advertising this route (zero means `do according to default'). Only valid for propagate action. Only valid if route origin is RIP or STATIC (ignored otherwise).
wfIpRfBgp3ExportNeighAs .1.3.6.1.4.1.18.3.5.3.2.1.15.1.14
If action is propagate, route origin is RIP or STATIC, and ExportOrigin is EGP, this AS number is used as the EGP neighbor AS number when constructing the AS-PATH (ignored otherwise).
Table
wfIpRfRipImportTable .1.3.6.1.4.1.18.3.5.3.2.1.8
The list of Rip Import Route Filter Rules in IP
wfIpRfRipExportTable .1.3.6.1.4.1.18.3.5.3.2.1.9
The list of Rip Export Route Filter Rules in IP
wfIpRfOspfImportTable .1.3.6.1.4.1.18.3.5.3.2.1.10
The list of OSPF Import Route Filter Rules in IP
wfIpRfOspfExportTable .1.3.6.1.4.1.18.3.5.3.2.1.11
The list of OSPF Export Route Filter Rules in IP
wfIpRfEgpImportTable .1.3.6.1.4.1.18.3.5.3.2.1.12
The list of Egp Import Route Filter Rules in IP
wfIpRfEgpExportTable .1.3.6.1.4.1.18.3.5.3.2.1.13
The list of Egp Export Route Filter Rules in IP
wfIpRfBgp3ImportTable .1.3.6.1.4.1.18.3.5.3.2.1.14
The table of BGP-3 Import Route Filter Rules
wfIpRfBgp3ExportTable .1.3.6.1.4.1.18.3.5.3.2.1.15
The table of BGP-3 Export Route Filter Rules