Wellfleet-SYS-SVC-MIB.mib object view, vendor Wellfleet
Introduction
Most network devices and programs ship with so-called MIB files to describe the parameters and meanings (i.e.: friendly names) which are available for monitoring via SNMP.
ActiveXperts Network Monitor 2024 can import vendor-specific MIB files, so it can be used to monitor specific OID's (Object Identifiers).
This way, you can monitor your devices, computers, etc. by selecting your relevant OID's by name.
ActiveXperts Network Monitor 2024 can import MIB file Wellfleet-SYS-SVC-MIB and use it to monitor vendor specific OID's.
Wellfleet-SYS-SVC-MIB file content
Object view of Wellfleet-SYS-SVC-MIB:
| Scalar Object |
| wfNetbootImage |
.1.3.6.1.4.1.18.3.3.2.10.1.1 |
|
Enables booting of an executable image over the network. If
disabled, then the image will be read from a local file system.
|
| wfNetbootConfig |
.1.3.6.1.4.1.18.3.3.2.10.1.2 |
|
Enables booting of a configuration file over the network. If
disabled, then the config will be read from a local file system.
|
| wfNetbootServerAddress |
.1.3.6.1.4.1.18.3.3.2.10.1.3 |
|
IP address of remote server.
|
| wfNetbootImageName |
.1.3.6.1.4.1.18.3.3.2.10.1.4 |
|
Pathname of image file on remote server.
|
| wfNetbootConfigName |
.1.3.6.1.4.1.18.3.3.2.10.1.5 |
|
Pathname of configuration file on remote server.
|
| wfNetbootCfgDelete |
.1.3.6.1.4.1.18.3.3.2.10.1.6 |
|
create/delete parameter, dflt = created
|
| wfNetbootImageCurr |
.1.3.6.1.4.1.18.3.3.2.10.2.1 |
|
Current value of Netboot image flag in Non-Volatile RAM.
|
| wfNetbootConfigCurr |
.1.3.6.1.4.1.18.3.3.2.10.2.2 |
|
Current value of Netboot config flag in Non-Volatile RAM.
|
| wfNetbootServerAddressCurr |
.1.3.6.1.4.1.18.3.3.2.10.2.3 |
|
IP address of remote server.
|
| wfNetbootImageNameCurr |
.1.3.6.1.4.1.18.3.3.2.10.2.4 |
|
Pathname of image file on remote server.
|
| wfNetbootConfigNameCurr |
.1.3.6.1.4.1.18.3.3.2.10.2.5 |
|
Pathname of configuration file on remote server.
|
| wfNetbootCfgEntry |
.1.3.6.1.4.1.18.3.3.2.10.3.1 |
|
Values of a particular interface's configuration parameters.
|
| wfNetbootCurrEntry |
.1.3.6.1.4.1.18.3.3.2.10.4.1 |
|
Values of a particular interface's current configuration parameters.
|
| Tabular Object |
| wfNetbootSlot |
.1.3.6.1.4.1.18.3.3.2.10.3.1.2 |
|
instance ID Slot, filled in by driver
|
| wfNetbootConnector |
.1.3.6.1.4.1.18.3.3.2.10.3.1.3 |
|
Unique number which identifies the interface for which the
following parameters are configured.
|
| wfNetbootDelete |
.1.3.6.1.4.1.18.3.3.2.10.3.1.1 |
|
create/delete parameter, dflt = created
Deleteing this instance will set the corresponding NOVRAM
values to the default settings.
|
| wfNetbootIpAddr |
.1.3.6.1.4.1.18.3.3.2.10.3.1.4 |
|
IP address to use on this interface
|
| wfNetbootIpMask |
.1.3.6.1.4.1.18.3.3.2.10.3.1.5 |
|
IP address mask to use on this interface
|
| wfNetbootNextHop |
.1.3.6.1.4.1.18.3.3.2.10.3.1.6 |
|
IP address of the next hop router connected to this interface.
This value is used to auto-configure a static route for
Network Boot.
|
| wfNetbootProtoMask |
.1.3.6.1.4.1.18.3.3.2.10.3.1.7 |
|
Bit Mask indicating a non-default protocol is being used on
this interface.
|
| wfNetbootDisable |
.1.3.6.1.4.1.18.3.3.2.10.3.1.8 |
|
Enable or disable the interface for Netbooting.
|
| wfNetbootConnName |
.1.3.6.1.4.1.18.3.3.2.10.3.1.9 |
|
Connector name.
|
| wfNetbootTokenRingSpeed |
.1.3.6.1.4.1.18.3.3.2.10.3.1.10 |
|
Speed of the Token Ring interface for Netbooting.
|
| wfNetbootBchanRate |
.1.3.6.1.4.1.18.3.3.2.10.3.1.11 |
|
Speed B Channel for Netbooting. AN 200 Only
|
| wfNetbootDsuCsuOpMode |
.1.3.6.1.4.1.18.3.3.2.10.3.1.12 |
|
Dsu/Csu interface speed for Netbooting
|
| wfNetbootCurrSlot |
.1.3.6.1.4.1.18.3.3.2.10.4.1.1 |
|
instance ID Slot, filled in by driver
|
| wfNetbootCurrConnector |
.1.3.6.1.4.1.18.3.3.2.10.4.1.2 |
|
Unique number which identifies the interface for which the
following parameters are configured.
|
| wfNetbootCurrIpAddr |
.1.3.6.1.4.1.18.3.3.2.10.4.1.3 |
|
IP address to use on this interface
|
| wfNetbootCurrIpMask |
.1.3.6.1.4.1.18.3.3.2.10.4.1.4 |
|
IP address mask to use on this interface
|
| wfNetbootCurrNextHop |
.1.3.6.1.4.1.18.3.3.2.10.4.1.5 |
|
IP address of the next hop router connected to this interface.
This value is used to auto-configure a static route for
Network Boot.
|
| wfNetbootCurrProtoMask |
.1.3.6.1.4.1.18.3.3.2.10.4.1.6 |
|
Bit Mask indicating a non-default protocol is being used on
this interface.
|
| wfNetbootCurrDisable |
.1.3.6.1.4.1.18.3.3.2.10.4.1.7 |
|
Enable or disable the interface for Netbooting.
|
| wfNetbootCurrConnName |
.1.3.6.1.4.1.18.3.3.2.10.4.1.8 |
|
Connector name.
|
| wfNetbootCurrTokenRingSpeed |
.1.3.6.1.4.1.18.3.3.2.10.4.1.9 |
|
Speed of the Token Ring interface for Netbooting.
|
| wfNetbootCurrBchanRate |
.1.3.6.1.4.1.18.3.3.2.10.4.1.10 |
|
Speed B Channel for Netbooting. AN 200 Only
|
| wfNetbootCurrDsuCsuOpMode |
.1.3.6.1.4.1.18.3.3.2.10.4.1.11 |
|
Dsu/Csu interface speed for Netbooting
|
| Table |
| wfNetbootCfgTable |
.1.3.6.1.4.1.18.3.3.2.10.3 |
|
A Table of Interface-specific Netboot Configuration Parameters
|
| wfNetbootCurrTable |
.1.3.6.1.4.1.18.3.3.2.10.4 |
|
A Table of current values for Interface-specific Netboot Parameters
|
| Object Identifier |
| wfNetbootCfgGroup |
.1.3.6.1.4.1.18.3.3.2.10.1 |
| wfNetbootCurrGroup |
.1.3.6.1.4.1.18.3.3.2.10.2 |
