| wfTcpDelete |
.1.3.6.1.4.1.18.3.5.3.3.1.1 |
|
Create/Delete parameter. Default is created.
Users perform a set operation on this
object in order to create/delete TCP.
|
| wfTcpDisable |
.1.3.6.1.4.1.18.3.5.3.3.1.2 |
|
Enable/Disable parameter. Default is enabled.
Users perform a set operation on this
object in order to enable/disable TCP.
|
| wfTcpState |
.1.3.6.1.4.1.18.3.5.3.3.1.3 |
|
The current state of the entire TCP.
|
| wfTcpRtoAlgorithm |
.1.3.6.1.4.1.18.3.5.3.3.1.4 |
|
The algorithm used to determine the timeout value
used for retransmitting unacknowledged octets.
|
| wfTcpRtoMin |
.1.3.6.1.4.1.18.3.5.3.3.1.5 |
|
The minimum value permitted by a TCP
implementation for the retransmission timeout,
measured in milliseconds. More refined semantics
for objects of this type depend upon the algorithm
used to determine the retransmission timeout. In
particular, when the timeout algorithm is rsre(3),
an object of this type has the semantics of the
LBOUND quantity described in RFC 793.
|
| wfTcpRtoMax |
.1.3.6.1.4.1.18.3.5.3.3.1.6 |
|
The maximum value permitted by a TCP
implementation for the retransmission timeout,
measured in milliseconds. More refined semantics
for objects of this type depend upon the algorithm
used to determine the retransmission timeout. In
particular, when the timeout algorithm is rsre(3),
an object of this type has the semantics of the
UBOUND quantity described in RFC 793.
|
| wfTcpMaxConn |
.1.3.6.1.4.1.18.3.5.3.3.1.7 |
|
The limit on the total number of TCP connections
the entity can support. In entities where the
maximum number of connections is dynamic, this
object should contain the value -1.
|
| wfTcpActiveOpens |
.1.3.6.1.4.1.18.3.5.3.3.1.8 |
|
The number of times TCP connections have made a
direct transition to the SYN-SENT state from the
CLOSED state.
|
| wfTcpPassiveOpens |
.1.3.6.1.4.1.18.3.5.3.3.1.9 |
|
The number of times TCP connections have made a
direct transition to the SYN-RCVD state from the
LISTEN state.
|
| wfTcpAttemptFails |
.1.3.6.1.4.1.18.3.5.3.3.1.10 |
|
The number of times TCP connections have made a
direct transition to the CLOSED state from either
the SYN-SENT state or the SYN-RCVD state, plus the
number of times TCP connections have made a direct
transition to the LISTEN state from the SYN-RCVD
state.
|
| wfTcpEstabResets |
.1.3.6.1.4.1.18.3.5.3.3.1.11 |
|
The number of times TCP connections have made a
direct transition to the CLOSED state from either
the ESTABLISHED state or the CLOSE-WAIT state.
|
| wfTcpCurrEstab |
.1.3.6.1.4.1.18.3.5.3.3.1.12 |
|
The number of TCP connections for which the
current state is either ESTABLISHED or CLOSE-
WAIT.
|
| wfTcpInSegs |
.1.3.6.1.4.1.18.3.5.3.3.1.13 |
|
The total number of segments received, including
those received in error. This count includes
segments received on currently established
connections.
|
| wfTcpOutSegs |
.1.3.6.1.4.1.18.3.5.3.3.1.14 |
|
The total number of segments sent, including
those on current connections but excluding those
containing only retransmitted octets.
|
| wfTcpRetransSegs |
.1.3.6.1.4.1.18.3.5.3.3.1.15 |
|
The total number of segments retransmitted - that
is, the number of TCP segments transmitted
containing one or more previously transmitted
octets.
|
| wfTcpInErrs |
.1.3.6.1.4.1.18.3.5.3.3.1.16 |
|
The total number of segments received in error
(e.g., bad TCP checksums).
|
| wfTcpOutRsts |
.1.3.6.1.4.1.18.3.5.3.3.1.17 |
|
The number of TCP segments sent containing the
RST flag.
|
| wfTcpMaxWindow |
.1.3.6.1.4.1.18.3.5.3.3.1.18 |
|
The maximum transmit and receive window size TCP will allow
for each connection measured in octets.
|
| wfTcpConnEntry |
.1.3.6.1.4.1.18.3.5.3.3.2.1 |
|
A TCP Connection
|
| wfTcpConnLocalAddress |
.1.3.6.1.4.1.18.3.5.3.3.2.1.3 |
|
The local IP address for this TCP connection. In
the case of a connection in the listen state which
is willing to accept connections for any IP
interface associated with the node, the value
0.0.0.0 is used.
|
| wfTcpConnLocalPort |
.1.3.6.1.4.1.18.3.5.3.3.2.1.4 |
|
The local port number for this TCP connection
|
| wfTcpConnRemAddress |
.1.3.6.1.4.1.18.3.5.3.3.2.1.5 |
|
The remote IP address for this TCP connection.
|
| wfTcpConnRemPort |
.1.3.6.1.4.1.18.3.5.3.3.2.1.6 |
|
The remote port number for this TCP connection.
|
| wfTcpConnDelete |
.1.3.6.1.4.1.18.3.5.3.3.2.1.1 |
|
The Delete connection attribute. Users set this attribute
to a value of TCP_CONN_STATE_DELETE to delete a TCP connection.
This is the only value that can be written. The instance should
never get created by a user writing to this attribute.
|
| wfTcpConnState |
.1.3.6.1.4.1.18.3.5.3.3.2.1.2 |
|
The state of this TCP connection.
The only value which may be set by a management
station is deleteTCB(12). Accordingly, it is
appropriate for an agent to return a `badValue'
response if a management station attempts to set
this object to any other value.
If a management station sets this object to the
value deleteTCB(12), then this has the effect of
deleting the TCB (as defined in RFC 793) of the
corresponding connection on the managed node,
resulting in immediate termination of the
connection.
As an implementation-specific option, a RST
segment may be sent from the managed node to the
other TCP endpoint (note however that RST segments
are not sent reliably).
|
| wfTcpConnKeepAliveInterval |
.1.3.6.1.4.1.18.3.5.3.3.2.1.7 |
|
The Interval(seconds) during which no packet has been
received on a session. A PROBE packet is sent to elicit
an ACK. Value passed by application in tcp_open or tcp_accept.
|
| wfTcpConnKeepAliveRto |
.1.3.6.1.4.1.18.3.5.3.3.2.1.8 |
|
Keep Alive Retransmit timer (seconds) after which a PROBE
packet is sent again if no response has been received.
Value passed by application in tcp_open or tcp_accept.
|
| wfTcpConnKeepAliveCount |
.1.3.6.1.4.1.18.3.5.3.3.2.1.9 |
|
The current number of consecutive Keep-Alive PROBES sent.
|
| wfTcpConnMd5Errors |
.1.3.6.1.4.1.18.3.5.3.3.2.1.10 |
|
A count of the number of TCP packets dropped \ndue to MD5 authentication errors
|
