You are here:

MonitorTools.com > Technical documentation > SNMP > MIB > Wellfleet > Wellfleet-TI-RUI-MIB
ActiveXperts Network Monitor 2019##AdminFavorites

Wellfleet-TI-RUI-MIB by vendor Wellfleet

Wellfleet-TI-RUI-MIB file content

The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.

Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.

Use ActiveXperts Network Monitor 2019 to import vendor-specific MIB files, inclusing Wellfleet-TI-RUI-MIB.


Vendor: Wellfleet
Mib: Wellfleet-TI-RUI-MIB  [download]  [view objects]
Tool: ActiveXperts Network Monitor 2019 [download]    (ships with advanced SNMP/MIB tools)
Wellfleet-TI-RUI-MIB DEFINITIONS ::= BEGIN

-- Created by mdl2asn version 3.1
-- Creation date: Wed Aug 30 16:49:32 EDT 1995


    IMPORTS

      Counter
        FROM RFC1155-SMI
      OBJECT-TYPE
        FROM RFC-1212
      DisplayString
        FROM RFC1213-MIB
      wfServices
        FROM Wellfleet-COMMON-MIB;


    wfTiRui		OBJECT IDENTIFIER ::= { wfServices 2 }

    wfTiRuiState OBJECT-TYPE
        SYNTAX	INTEGER {
    		    idle(1),
    		    busy(2)
    		}
        ACCESS	read-only
        STATUS	mandatory
        DESCRIPTION
                "The state of the ti rui command processor. Idle is normal state. Busy
                indicates a command is being processed. "
        DEFVAL	{ idle }
        ::= { wfTiRui 1 }

    wfTiRuiAction OBJECT-TYPE
        SYNTAX	DisplayString
        ACCESS	read-write
        STATUS	mandatory
        DESCRIPTION
                "Ti command request string"
        ::= { wfTiRui 2 }

    wfTiRuiResult OBJECT-TYPE
        SYNTAX	DisplayString
        ACCESS	read-only
        STATUS	mandatory
        DESCRIPTION
                "The result of the Ti command requst"
        ::= { wfTiRui 3 }

    wfTiRuiInReqs OBJECT-TYPE
        SYNTAX	Counter
        ACCESS	read-only
        STATUS	mandatory
        DESCRIPTION
                "Total number of command requests"
        ::= { wfTiRui 4 }

    wfTiRuiOutResults OBJECT-TYPE
        SYNTAX	Counter
        ACCESS	read-only
        STATUS	mandatory
        DESCRIPTION
                "Total number of command requests that processed without error"
        ::= { wfTiRui 5 }

    wfTiRuiOutResultsErr OBJECT-TYPE
        SYNTAX	Counter
        ACCESS	read-only
        STATUS	mandatory
        DESCRIPTION
                "Total number of command requests that could not be processed because of
                errors "
        ::= { wfTiRui 6 }

    END  -- Wellfleet-TI-RUI-MIB