ActiveXperts Network Monitor 2019##AdminFavorites

Wellfleet-X25PAD-MIB.mib object view, vendor Wellfleet

Introduction

Most network devices and programs ship with so-called MIB files to describe the parameters and meanings (i.e.: friendly names) which are available for monitoring via SNMP.
ActiveXperts Network Monitor 2019 can import vendor-specific MIB files, so it can be used to monitor specific OID's (Object Identifiers). This way, you can monitor your devices, computers, etc. by selecting your relevant OID's by name.

ActiveXperts Network Monitor 2019 can import MIB file Wellfleet-X25PAD-MIB and use it to monitor vendor specific OID's.

Wellfleet-X25PAD-MIB file content

Object view of Wellfleet-X25PAD-MIB:

Scalar Object
wfX25PadDefaultCfgEntry .1.3.6.1.4.1.18.3.5.9.12.1.1
An entry in the X25 Pad Config Table
wfX25PadCurrentCfgEntry .1.3.6.1.4.1.18.3.5.9.12.2.1
An entry in the X25 Pad Config Table
wfX25PadStatEntry .1.3.6.1.4.1.18.3.5.9.12.3.1
An entry in the X25 Pad Config Table
wfX25PadPortDefaultCfgEntry .1.3.6.1.4.1.18.3.5.9.12.4.1
An entry in the X25 Pad Port Config Table
wfX25PadPortCurrentCfgEntry .1.3.6.1.4.1.18.3.5.9.12.5.1
An entry in the X25 Pad Port Config Table
wfX25PadPortStatEntry .1.3.6.1.4.1.18.3.5.9.12.6.1
An entry in the X25 Pad Port Stat Table
Tabular Object
wfX25PadDefaultCfgSlot .1.3.6.1.4.1.18.3.5.9.12.1.1.4
Instance ID Slot, filled in by ISDB mib gate
wfX25PadDefaultCfgConnector .1.3.6.1.4.1.18.3.5.9.12.1.1.5
Instance ID Connector, filled in by ISDB mib gate. For the ASN this attribute is an encoded value and is equal to 'module'*10 + 'connector'. Where 'module' is defined in attribute 86 and 'connector' is defined in attribute 78 of this table. For non-ASN platforms this attribute is the physical connector number on the slot.
wfX25PadDefaultCfgDelete .1.3.6.1.4.1.18.3.5.9.12.1.1.1
Create/Delete parameter
wfX25PadDefaultCfgDisable .1.3.6.1.4.1.18.3.5.9.12.1.1.2
Enable/Disable parameter
wfX25PadDefaultCfgState .1.3.6.1.4.1.18.3.5.9.12.1.1.3
Current state of X.25 PAD sofware on the I-SDB
wfX25PadDefaultCfgCircuit .1.3.6.1.4.1.18.3.5.9.12.1.1.6
Circuit number, filled in by ISDB mib gate
wfX25PadDefaultCfgX121Addr .1.3.6.1.4.1.18.3.5.9.12.1.1.7
X.121 address of the X.25 Pad
wfX25PadDefaultCfgDNIC .1.3.6.1.4.1.18.3.5.9.12.1.1.8
Data Network Identification Code
wfX25PadDefaultCfgLenSubAddress .1.3.6.1.4.1.18.3.5.9.12.1.1.9
Length of X.121 subaddress
wfX25PadDefaultCfgLCNLow .1.3.6.1.4.1.18.3.5.9.12.1.1.10
Lower range for logical channel numbers
wfX25PadDefaultCfgLCNHigh .1.3.6.1.4.1.18.3.5.9.12.1.1.11
Upper range for logical channel numbers
wfX25PadCurrentCfgSlot .1.3.6.1.4.1.18.3.5.9.12.2.1.2
Instance ID Slot, filled in by ISDB mib gate
wfX25PadCurrentCfgConnector .1.3.6.1.4.1.18.3.5.9.12.2.1.3
Instance ID Connector, filled in by ISDB mib gate. For the ASN this attribute is an encoded value and is equal to 'module'*10 + 'connector'. Where 'module' is defined in attribute 86 and 'connector' is defined in attribute 78 of this table. For non-ASN platforms this attribute is the physical connector number on the slot.
wfX25PadCurrentCfgState .1.3.6.1.4.1.18.3.5.9.12.2.1.1
Current state of X.25 PAD sofware on the I-SDB
wfX25PadCurrentCfgCircuit .1.3.6.1.4.1.18.3.5.9.12.2.1.4
Circuit number, filled in by ISDB mib gate
wfX25PadCurrentCfgX121Addr .1.3.6.1.4.1.18.3.5.9.12.2.1.5
X.121 address of the X.25 Pad
wfX25PadCurrentCfgDNIC .1.3.6.1.4.1.18.3.5.9.12.2.1.6
Data Network Identification Code
wfX25PadCurrentCfgLenSubAddress .1.3.6.1.4.1.18.3.5.9.12.2.1.7
Length of X.121 subaddress
wfX25PadCurrentCfgLCNLow .1.3.6.1.4.1.18.3.5.9.12.2.1.8
Lower range for logical channel numbers
wfX25PadCurrentCfgLCNHigh .1.3.6.1.4.1.18.3.5.9.12.2.1.9
Upper range for logical channel numbers
wfX25PadStatSlot .1.3.6.1.4.1.18.3.5.9.12.3.1.2
Instance ID Slot, filled in by ISDB mib gate
wfX25PadStatConnector .1.3.6.1.4.1.18.3.5.9.12.3.1.3
Instance ID Connector, filled in by ISDB mib gate. For the ASN this attribute is an encoded value and is equal to 'module'*10 + 'connector'. Where 'module' is defined in attribute 86 and 'connector' is defined in attribute 78 of this table. For non-ASN platforms this attribute is the physical connector number on the slot.
wfX25PadStatState .1.3.6.1.4.1.18.3.5.9.12.3.1.1
Current state of X.25 PAD sofware on the I-SDB
wfX25PadStatTotalConnCount .1.3.6.1.4.1.18.3.5.9.12.3.1.4
Total number of connections made to the X.25 Pad
wfX25PadStatRxRR .1.3.6.1.4.1.18.3.5.9.12.3.1.5
Number of receiver ready packets received
wfX25PadStatTxRR .1.3.6.1.4.1.18.3.5.9.12.3.1.6
Number of receiver ready packets transmitted
wfX25PadStatRxRNR .1.3.6.1.4.1.18.3.5.9.12.3.1.7
Number of receiver not ready packets received
wfX25PadStatTxRNR .1.3.6.1.4.1.18.3.5.9.12.3.1.8
Number of receiver not ready packets transmitted
wfX25PadStatRxRestart .1.3.6.1.4.1.18.3.5.9.12.3.1.9
Number of restart packets received
wfX25PadStatTxRestart .1.3.6.1.4.1.18.3.5.9.12.3.1.10
Number of restart packets transmitted
wfX25PadPortDefaultCfgSlot .1.3.6.1.4.1.18.3.5.9.12.4.1.4
Instance ID Slot, filled in by ISDB mib gate
wfX25PadPortDefaultCfgConnector .1.3.6.1.4.1.18.3.5.9.12.4.1.5
Instance ID Connector, filled in by ISDB mib gate. For the ASN this attribute is an encoded value and is equal to 'module'*10 + 'connector'. Where 'module' is defined in attribute 86 and 'connector' is defined in attribute 78 of this table. For non-ASN platforms this attribute is the physical connector number on the slot.
wfX25PadPortDefaultCfgNumber .1.3.6.1.4.1.18.3.5.9.12.4.1.6
Instance ID Async Port, filled in by ISDB mib gate
wfX25PadPortDefaultCfgDelete .1.3.6.1.4.1.18.3.5.9.12.4.1.1
Create/Delete parameter
wfX25PadPortDefaultCfgDisable .1.3.6.1.4.1.18.3.5.9.12.4.1.2
Enable/Disable parameter
wfX25PadPortDefaultCfgState .1.3.6.1.4.1.18.3.5.9.12.4.1.3
Current state of X.25 PAD sofware on the I-SDB
wfX25PadPortDefaultCfgSubAddress .1.3.6.1.4.1.18.3.5.9.12.4.1.7
Subaddress portion of an X.121 address that is used by an application and is transparent to the network
wfX25PadPortDefaultCfgLenSubAddress .1.3.6.1.4.1.18.3.5.9.12.4.1.8
Size of the Subaddress portion of an X.121 address
wfX25PadPortDefaultCfgX3escape .1.3.6.1.4.1.18.3.5.9.12.4.1.9
PAD recall using a character
wfX25PadPortDefaultCfgX3echo .1.3.6.1.4.1.18.3.5.9.12.4.1.10
PAD echo
wfX25PadPortDefaultCfgX3forward .1.3.6.1.4.1.18.3.5.9.12.4.1.11
Selection of the data forwarding characters
wfX25PadPortDefaultCfgX3idle .1.3.6.1.4.1.18.3.5.9.12.4.1.12
Selection of the idle timer delay
wfX25PadPortDefaultCfgX3device .1.3.6.1.4.1.18.3.5.9.12.4.1.13
Ancillary device control
wfX25PadPortDefaultCfgX3signals .1.3.6.1.4.1.18.3.5.9.12.4.1.14
Control of PAD service signals
wfX25PadPortDefaultCfgX3break .1.3.6.1.4.1.18.3.5.9.12.4.1.15
Selection of operation of the PAD on receipt of the break signal
wfX25PadPortDefaultCfgX3discard .1.3.6.1.4.1.18.3.5.9.12.4.1.16
Discard output
wfX25PadPortDefaultCfgX3CRpad .1.3.6.1.4.1.18.3.5.9.12.4.1.17
Padding after carriage return
wfX25PadPortDefaultCfgX3folding .1.3.6.1.4.1.18.3.5.9.12.4.1.18
Line folding
wfX25PadPortDefaultCfgX3speed .1.3.6.1.4.1.18.3.5.9.12.4.1.19
Binary speed
wfX25PadPortDefaultCfgX3flow .1.3.6.1.4.1.18.3.5.9.12.4.1.20
Flow Control of the PAD by the start-stop mode DTE
wfX25PadPortDefaultCfgX3LFinsert .1.3.6.1.4.1.18.3.5.9.12.4.1.21
Linefeed insertion after carriage return
wfX25PadPortDefaultCfgX3LFpad .1.3.6.1.4.1.18.3.5.9.12.4.1.22
Linefeed padding
wfX25PadPortDefaultCfgX3Edit .1.3.6.1.4.1.18.3.5.9.12.4.1.23
Editing
wfX25PadPortDefaultCfgX3Cdelete .1.3.6.1.4.1.18.3.5.9.12.4.1.24
Character delete
wfX25PadPortDefaultCfgX3Ldelete .1.3.6.1.4.1.18.3.5.9.12.4.1.25
Line delete
wfX25PadPortDefaultCfgX3Ldisplay .1.3.6.1.4.1.18.3.5.9.12.4.1.26
Line display
wfX25PadPortDefaultCfgX3Esignals .1.3.6.1.4.1.18.3.5.9.12.4.1.27
Editing PAD service signals
wfX25PadPortDefaultCfgX3Mask .1.3.6.1.4.1.18.3.5.9.12.4.1.28
Echo mask
wfX25PadPortDefaultCfgX3parity .1.3.6.1.4.1.18.3.5.9.12.4.1.29
Parity treatment
wfX25PadPortDefaultCfgX3page .1.3.6.1.4.1.18.3.5.9.12.4.1.30
Page wait
wfX25PadPortDefaultCfgLenUserData .1.3.6.1.4.1.18.3.5.9.12.4.1.31
Length of the user defined data
wfX25PadPortDefaultCfgUserData .1.3.6.1.4.1.18.3.5.9.12.4.1.32
User defined data field represented in hexadecimal
wfX25PadPortDefaultCfgLenRawFacilities .1.3.6.1.4.1.18.3.5.9.12.4.1.33
Length of the user defined facilities
wfX25PadPortDefaultCfgRawFacilitiesData .1.3.6.1.4.1.18.3.5.9.12.4.1.34
User defined facilities filed represented in hexadecimal
wfX25PadPortDefaultCfgReverseCharge .1.3.6.1.4.1.18.3.5.9.12.4.1.35
If subscribed to, authorizes the DCE to transmit to the DTE incoming calls which request the reverse charging facility. In absence of this facility the DCE will not transmit to the DTE incoming calls which request the reverse charging facility.
wfX25PadPortDefaultCfgThruClassNegotiation .1.3.6.1.4.1.18.3.5.9.12.4.1.36
This facility, if subscribed to, allows negotiation on a per call basis of the throughput classes. The throughput classes are considered independently for each direction of data transmission.
wfX25PadPortDefaultCfgPacketSizeNegotiation .1.3.6.1.4.1.18.3.5.9.12.4.1.37
This facility, if subscribed to, will cause the DTE to request packet sizes for both directions of data transmission
wfX25PadPortDefaultCfgWindowSizeNegotiation .1.3.6.1.4.1.18.3.5.9.12.4.1.38
This facility, if subscribed to, will cause the DTE to request window sizes for both directions of data transmission
wfX25PadPortDefaultCfgIntervalTimer .1.3.6.1.4.1.18.3.5.9.12.4.1.39
Time (where 1 equals 10 milliseconds) that the X.25 PAD will wait before forwarding packets with characters in them
wfX25PadPortDefaultCfgFullAddressing .1.3.6.1.4.1.18.3.5.9.12.4.1.40
Determines whether calling addresses should be included or not
wfX25PadPortCurrentCfgSlot .1.3.6.1.4.1.18.3.5.9.12.5.1.2
Instance ID Slot, filled in by ISDB mib gate
wfX25PadPortCurrentCfgConnector .1.3.6.1.4.1.18.3.5.9.12.5.1.3
Instance ID Connector, filled in by ISDB mib gate. For the ASN this attribute is an encoded value and is equal to 'module'*10 + 'connector'. Where 'module' is defined in attribute 86 and 'connector' is defined in attribute 78 of this table. For non-ASN platforms this attribute is the physical connector number on the slot.
wfX25PadPortCurrentCfgNumber .1.3.6.1.4.1.18.3.5.9.12.5.1.4
Instance ID Async Port, filled in by ISDB mib gate
wfX25PadPortCurrentCfgState .1.3.6.1.4.1.18.3.5.9.12.5.1.1
Current state of X.25 PAD sofware on the I-SDB
wfX25PadPortCurrentCfgSubAddress .1.3.6.1.4.1.18.3.5.9.12.5.1.5
Subaddress portion of an X.121 address that is used by an application and is transparent to the network
wfX25PadPortCurrentCfgLenSubAddress .1.3.6.1.4.1.18.3.5.9.12.5.1.6
Size of the Subaddress portion of an X.121 address
wfX25PadPortCurrentCfgX3escape .1.3.6.1.4.1.18.3.5.9.12.5.1.7
PAD recall using a character
wfX25PadPortCurrentCfgX3echo .1.3.6.1.4.1.18.3.5.9.12.5.1.8
PAD echo
wfX25PadPortCurrentCfgX3forward .1.3.6.1.4.1.18.3.5.9.12.5.1.9
Selection of the data forwarding characters
wfX25PadPortCurrentCfgX3idle .1.3.6.1.4.1.18.3.5.9.12.5.1.10
Selection of the idle timer delay
wfX25PadPortCurrentCfgX3device .1.3.6.1.4.1.18.3.5.9.12.5.1.11
Ancillary device control
wfX25PadPortCurrentCfgX3signals .1.3.6.1.4.1.18.3.5.9.12.5.1.12
Control of PAD service signals
wfX25PadPortCurrentCfgX3break .1.3.6.1.4.1.18.3.5.9.12.5.1.13
Selection of operation of the PAD on receipt of the break signal
wfX25PadPortCurrentCfgX3discard .1.3.6.1.4.1.18.3.5.9.12.5.1.14
Discard output
wfX25PadPortCurrentCfgX3CRpad .1.3.6.1.4.1.18.3.5.9.12.5.1.15
Padding after carriage return
wfX25PadPortCurrentCfgX3folding .1.3.6.1.4.1.18.3.5.9.12.5.1.16
Line folding
wfX25PadPortCurrentCfgX3speed .1.3.6.1.4.1.18.3.5.9.12.5.1.17
Binary speed
wfX25PadPortCurrentCfgX3flow .1.3.6.1.4.1.18.3.5.9.12.5.1.18
Flow Control of the PAD by the start-stop mode DTE
wfX25PadPortCurrentCfgX3LFinsert .1.3.6.1.4.1.18.3.5.9.12.5.1.19
Linefeed insertion after carriage return
wfX25PadPortCurrentCfgX3LFpad .1.3.6.1.4.1.18.3.5.9.12.5.1.20
Linefeed padding
wfX25PadPortCurrentCfgX3Edit .1.3.6.1.4.1.18.3.5.9.12.5.1.21
Editing
wfX25PadPortCurrentCfgX3Cdelete .1.3.6.1.4.1.18.3.5.9.12.5.1.22
Character delete
wfX25PadPortCurrentCfgX3Ldelete .1.3.6.1.4.1.18.3.5.9.12.5.1.23
Line delete
wfX25PadPortCurrentCfgX3Ldisplay .1.3.6.1.4.1.18.3.5.9.12.5.1.24
Line display
wfX25PadPortCurrentCfgX3Esignals .1.3.6.1.4.1.18.3.5.9.12.5.1.25
Editing PAD service signals
wfX25PadPortCurrentCfgX3Mask .1.3.6.1.4.1.18.3.5.9.12.5.1.26
Echo mask
wfX25PadPortCurrentCfgX3parity .1.3.6.1.4.1.18.3.5.9.12.5.1.27
Parity treatment
wfX25PadPortCurrentCfgX3page .1.3.6.1.4.1.18.3.5.9.12.5.1.28
Page wait
wfX25PadPortCurrentCfgLenUserData .1.3.6.1.4.1.18.3.5.9.12.5.1.29
Length of the user defined data
wfX25PadPortCurrentCfgUserData .1.3.6.1.4.1.18.3.5.9.12.5.1.30
User defined data field represented in hexadecimal
wfX25PadPortCurrentCfgLenRawFacilities .1.3.6.1.4.1.18.3.5.9.12.5.1.31
Length of the user defined facilities
wfX25PadPortCurrentCfgRawFacilitiesData .1.3.6.1.4.1.18.3.5.9.12.5.1.32
User defined facilities filed represented in hexadecimal
wfX25PadPortCurrentCfgReverseCharge .1.3.6.1.4.1.18.3.5.9.12.5.1.33
If subscribed to, authorizes the DCE to transmit to the DTE incoming calls which request the reverse charging facility. In absence of this facility the DCE will not transmit to the DTE incoming calls which request the reverse charging facility.
wfX25PadPortCurrentCfgThruClassNegotiation .1.3.6.1.4.1.18.3.5.9.12.5.1.34
This facility, if subscribed to, allows negotiation on a per call basis of the throughput classes. The throughput classes are considered independently for each direction of data transmission.
wfX25PadPortCurrentCfgPacketSizeNegotiation .1.3.6.1.4.1.18.3.5.9.12.5.1.35
This facility, if subscribed to, will cause the DTE to request packet sizes for both directions of data transmission.
wfX25PadPortCurrentCfgWindowSizeNegotiation .1.3.6.1.4.1.18.3.5.9.12.5.1.36
This facility, if subscribed to, will cause the DTE to request window sizes for both directions of data transmission.
wfX25PadPortCurrentCfgIntervalTimer .1.3.6.1.4.1.18.3.5.9.12.5.1.37
Time (where 1 equals 10 milliseconds) that the X.25 PAD will wait before forwarding packets with characters in them
wfX25PadPortCurrentCfgFullAddressing .1.3.6.1.4.1.18.3.5.9.12.5.1.38
Determines whether calling addresses should be included or not
wfX25PadPortStatSlot .1.3.6.1.4.1.18.3.5.9.12.6.1.2
Instance ID Slot, filled in by ISDB mib gate
wfX25PadPortStatConnector .1.3.6.1.4.1.18.3.5.9.12.6.1.3
Instance ID Connector, filled in by ISDB mib gate. For the ASN this attribute is an encoded value and is equal to 'module'*10 + 'connector'. Where 'module' is defined in attribute 86 and 'connector' is defined in attribute 78 of this table. For non-ASN platforms this attribute is the physical connector number on the slot.
wfX25PadPortStatNumber .1.3.6.1.4.1.18.3.5.9.12.6.1.4
Instance ID Async Port, filled in by ISDB mib gate
wfX25PadPortStatState .1.3.6.1.4.1.18.3.5.9.12.6.1.1
Current state of X.25 PAD sofware on the I-SDB
wfX25PadPortStatRxOctets .1.3.6.1.4.1.18.3.5.9.12.6.1.5
Number of octets received on this async port
wfX25PadPortStatTxOctets .1.3.6.1.4.1.18.3.5.9.12.6.1.6
Number of octets transmitted on this async port
wfX25PadPortStatRxPackets .1.3.6.1.4.1.18.3.5.9.12.6.1.7
Number of packets received on this async port
wfX25PadPortStatTxPackets .1.3.6.1.4.1.18.3.5.9.12.6.1.8
Number of packets transmitted on this async port
wfX25PadPortStatRemoteX121Addr .1.3.6.1.4.1.18.3.5.9.12.6.1.9
Remote X.121 address
wfX25PadPortStatLCN .1.3.6.1.4.1.18.3.5.9.12.6.1.10
Current connection's logical channel number
wfX25PadPortStatDuration .1.3.6.1.4.1.18.3.5.9.12.6.1.11
Time in seconds of the call
wfX25PadPortStatRxRR .1.3.6.1.4.1.18.3.5.9.12.6.1.12
Number of receiver ready packets received
wfX25PadPortStatTxRR .1.3.6.1.4.1.18.3.5.9.12.6.1.13
Number of receiver ready packets transmitted
wfX25PadPortStatRxRNR .1.3.6.1.4.1.18.3.5.9.12.6.1.14
Number of receiver not ready packets received
wfX25PadPortStatTxRNR .1.3.6.1.4.1.18.3.5.9.12.6.1.15
Number of receiver not ready packets transmitted
wfX25PadPortStatRxClr .1.3.6.1.4.1.18.3.5.9.12.6.1.16
Number of call clear packets received
wfX25PadPortStatTxClr .1.3.6.1.4.1.18.3.5.9.12.6.1.17
Number of call clear packets transmitted
wfX25PadPortStatRxReset .1.3.6.1.4.1.18.3.5.9.12.6.1.18
Number of reset packets received
wfX25PadPortStatTxReset .1.3.6.1.4.1.18.3.5.9.12.6.1.19
Number of reset packets transmitted
wfX25PadPortStatRxCall .1.3.6.1.4.1.18.3.5.9.12.6.1.20
Number of call request packets received
wfX25PadPortStatTxCall .1.3.6.1.4.1.18.3.5.9.12.6.1.21
Number of call request packets transmitted
wfX25PadPortStatConnections .1.3.6.1.4.1.18.3.5.9.12.6.1.22
Number of connections made
wfX25PadPortStatDisconnects .1.3.6.1.4.1.18.3.5.9.12.6.1.23
Number of disconnects made
wfX25PadPortStatLastCause .1.3.6.1.4.1.18.3.5.9.12.6.1.24
Last cause code
wfX25PadPortStatLastDiag .1.3.6.1.4.1.18.3.5.9.12.6.1.25
Last diag code
Table
wfX25PadDefaultCfgTable .1.3.6.1.4.1.18.3.5.9.12.1
Table of X25 PAD Config Objects
wfX25PadCurrentCfgTable .1.3.6.1.4.1.18.3.5.9.12.2
Table of X25 PAD Config Objects
wfX25PadStatTable .1.3.6.1.4.1.18.3.5.9.12.3
Table of X25 PAD Stat Objects
wfX25PadPortDefaultCfgTable .1.3.6.1.4.1.18.3.5.9.12.4
Table of X25 PAD Port Config Objects
wfX25PadPortCurrentCfgTable .1.3.6.1.4.1.18.3.5.9.12.5
Table of X25 PAD Port Config Objects
wfX25PadPortStatTable .1.3.6.1.4.1.18.3.5.9.12.6
Table of X25 PAD Port Stat Objects