cisco-mgx82xx-envmon-mib.mib object
Introduction
Most network devices and programs ship with so-called MIB files to describe the parameters and meanings (i.e.: friendly names) which are available for monitoring via SNMP.
ActiveXperts Network Monitor 2025 can import vendor-specific MIB files, so it can be used to monitor specific OID's (Object Identifiers).
This way, you can monitor your devices, computers, etc. by selecting your relevant OID's by name.
ActiveXperts Network Monitor 2025 can import MIB file cisco-mgx82xx-envmon-mib and use it to monitor vendor specific OID's.
cisco-mgx82xx-envmon-mib file content
Object view of cisco-mgx82xx-envmon-mib:
| Scalar Object |
| asmAlarmEntry |
.1.3.6.1.4.1.351.110.1.2.1.1 |
|
An entry in the Basis ASM Alarm Table.
|
| asmNumOfValidEntries |
.1.3.6.1.4.1.351.110.1.2.2 |
|
The number of valid asmAlarmTable entries (regardless
of how many are actually configured) in the table.
|
| asmShelfAlarmState |
.1.3.6.1.4.1.351.110.1.2.3 |
|
This object indicates whether any Shelf/Node Alarm has been
declared in the system.
|
| Tabular Object |
| asmAlarmNum |
.1.3.6.1.4.1.351.110.1.2.1.1.1 |
|
This object is the identifier of a ASM alarm
entry. The Alarm is further identified by the
objects ASMAlarmType & ASMAlarmUnitNum.
|
| asmAlarmType |
.1.3.6.1.4.1.351.110.1.2.1.1.2 |
|
The value for this object indicates the type
of device for which alarm is applicable.
The possible values are :
alarmOther (1) : Other than specified below
alarmTemperature(2) : Temperature sensor
alarmPSU (3) : Power Supply Unit
alarmDCLevel (4) : DC Level Sensor
alarmFanUnit (5) : FAN speed sensor.
|
| asmAlarmUnitNum |
.1.3.6.1.4.1.351.110.1.2.1.1.3 |
|
This object identifies one unit among a number of
identical units represented in this table having the
same asmAlarmType.
|
| asmAlarmThreshold |
.1.3.6.1.4.1.351.110.1.2.1.1.4 |
|
This object specifies the threshold beyond which
the alarmable unit is said to be in an abnormal state.
|
| asmAlarmSeverity |
.1.3.6.1.4.1.351.110.1.2.1.1.5 |
|
This variable specifies the severity of the alarm
to be declared when the asmAlarmThreshold specified is
exceeded.
|
| asmUnitMeasurable |
.1.3.6.1.4.1.351.110.1.2.1.1.6 |
|
This object indicates if the alarm unit is measurable
by the switch/system.
|
| asmUnitMeasuredValue |
.1.3.6.1.4.1.351.110.1.2.1.1.7 |
|
This object gives the measured value of the entity
addressed by asmAlarmNum. The value in this object
is valid only if asmUnitMeasurable is set to 'yes'.
This object contains value zero for asmUnitMeasurable
value of 'no'.
|
| asmPhysicalAlarmState |
.1.3.6.1.4.1.351.110.1.2.1.1.8 |
|
This object indicates the status of the ASM alarm
represented in this entry. It is a bitmap where a
set bit indicates an abnormal condition. A reset bit
signifies normal operation.
|
| asmClrButton |
.1.3.6.1.4.1.351.110.1.2.1.1.9 |
|
This object when set to asmAlarmClear(2),causes the
alarm to be cleared.
|
| Table |
| asmAlarmTable |
.1.3.6.1.4.1.351.110.1.2.1 |
|
The ASM Alarm table. The table size is
given by the value of ASMNumOfValidEntries.
|
| Object Identifier |
| ciscoMgx82xxEnvmonMIB |
.1.3.6.1.4.1.351.150.70 |
|
The MIB module to describe the status of the
Environmental Monitoring devices in
MGX82xx products.
|
| cmEnvmonMIBConformance |
.1.3.6.1.4.1.351.150.70.2 |
| cmEnvmonMIBGroups |
.1.3.6.1.4.1.351.150.70.2.1 |
| cmEnvmonMIBCompliances |
.1.3.6.1.4.1.351.150.70.2.2 |
| Group |
| cmEnvmonInfoGroup |
.1.3.6.1.4.1.351.150.70.2.1.1 |
|
The collection of objects which are used for
providing information on environmental monitoring
devices.
|
| cmEnvmonGeneralGroup |
.1.3.6.1.4.1.351.150.70.2.1.2 |
|
The collection of objects which are used for
providing information on shelf level objects
related to environmental monitoring devices.
|
