cisco-wan-fr-rsrc-part-mib.mib object
Introduction
Most network devices and programs ship with so-called MIB files to describe the parameters and meanings (i.e.: friendly names) which are available for monitoring via SNMP.
ActiveXperts Network Monitor 2025 can import vendor-specific MIB files, so it can be used to monitor specific OID's (Object Identifiers).
This way, you can monitor your devices, computers, etc. by selecting your relevant OID's by name.
ActiveXperts Network Monitor 2025 can import MIB file cisco-wan-fr-rsrc-part-mib and use it to monitor vendor specific OID's.
cisco-wan-fr-rsrc-part-mib file content
Object view of cisco-wan-fr-rsrc-part-mib:
| Scalar Object |
| frPortCnfResPartGrpEntry |
.1.3.6.1.4.1.351.110.5.1.1.1.5.1.1 |
|
An entry for a resource partition. A resource
partition has to be created before connections
can be added on a frame relay port.
|
| Tabular Object |
| frResPartPortNum |
.1.3.6.1.4.1.351.110.5.1.1.1.5.1.1.1 |
|
The value of this object identifies the frame
relay port. The value of this object must be
same as the value of 'portNum' from frPortCnfPortGrpTable.
If frame relay port is available in ifTable,
then the value of this object must be same as the
ifIndex value of frame relay ports with
ifType frameRelayService(44) and frForward(158).
|
| frResPartCtrlrNum |
.1.3.6.1.4.1.351.110.5.1.1.1.5.1.1.2 |
|
This object identifies the controller
which can be used for accessing the resources.
The possible values are :
par(1) : Portable Auto Route controller.
: This value is applicable in Release 1.x.
pnni(2): PNNI Controller.
: This value is applicable in Release 2.x.
tag(3) : MPLS(Formerly known as Tag Switch)Controller
|
| frResPartRowStatus |
.1.3.6.1.4.1.351.110.5.1.1.1.5.1.1.3 |
|
This object is used for adding/deleting/modifying
resource partition on a frame relay port.
In MGX Release 1.x:
To add an entry, this object should be set to add, value for
other objects should not be specified. FRSM will choose
default values for all other objects.
In MGX Release 2.x:
To add an entry, this object should be set to add, value
for frResPartCtrlrID may be specified. FRSM will choose
default values for all other objects.
To delete an entry, this object has to be set to del.
Currently the value mod is not supported.
The resource partition can be deleted only after
deleting all the connections (LCNs).
|
| frResPartNumOfLcnAvail |
.1.3.6.1.4.1.351.110.5.1.1.1.5.1.1.4 |
|
This represents number of LCNs available for this
controller and this port.
FRSM VHS 2CT3 can support LCNs upto 4000.
FRSM12 can support LCNs upto 16000.
|
| frResPartDlciLow |
.1.3.6.1.4.1.351.110.5.1.1.1.5.1.1.5 |
|
This represents low end of reserved DLCI.
|
| frResPartDlciHigh |
.1.3.6.1.4.1.351.110.5.1.1.1.5.1.1.6 |
|
This represents high end of reserved DLCI.
|
| frResPartIngrPctBW |
.1.3.6.1.4.1.351.110.5.1.1.1.5.1.1.7 |
|
The percentage of total ingress bandwidth reserved.
|
| frResPartEgrPctBW |
.1.3.6.1.4.1.351.110.5.1.1.1.5.1.1.8 |
|
The percentage of total egress bandwidth reserved.
|
| frResPartCtrlrID |
.1.3.6.1.4.1.351.110.5.1.1.1.5.1.1.9 |
|
This is the controller identifier for the
resource patition.
The default value is set for PNNI controller.
Refer object frResPartCtrlrNum.
|
| Table |
| frPortCnfResPartGrpTable |
.1.3.6.1.4.1.351.110.5.1.1.1.5.1 |
|
This table is for configuring resource partition
parameters. A resource partition is configured
on frame relay port. The frame relay port
if available in ifTable is identified by ifType
values frameRelayService(44) and frForward(158).
|
| Object Identifier |
| ciscoWanFrRsrcPartMIB |
.1.3.6.1.4.1.351.150.45 |
|
The MIB module to configure the resource partition
on Frame Relay Ports.
Terminlogies used:
LCN : Logical Connection Number.
DLCI : Data Link Connection Identifier.
A unique number assigned to a PVC endpoint in
a frame relay network. This identifies a particular
PVC endpoint within a user's access channel in a
frame relay network and has local significance only
to that channel.
|
| cwfRsrcPartMIBConformance |
.1.3.6.1.4.1.351.150.45.2 |
| cwfRsrcPartMIBCompliances |
.1.3.6.1.4.1.351.150.45.2.1 |
| cwfRsrcPartMIBGroups |
.1.3.6.1.4.1.351.150.45.2.2 |
| Group |
| ciscoWanFrRsrcPartGroup |
.1.3.6.1.4.1.351.150.45.2.2.1 |
|
A collection of objects providing the
Frame Relay Port resource partition configuration
information.
|
