You are here:

MonitorTools.com > Technical documentation > SNMP > MIB > Cisco > CISCO-ITP-GACT-MIB
ActiveXperts Network Monitor 2019##AdminFavorites

CISCO-ITP-GACT-MIB by vendor Cisco

CISCO-ITP-GACT-MIB file content

The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.

Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.

Use ActiveXperts Network Monitor 2019 to import vendor-specific MIB files, inclusing CISCO-ITP-GACT-MIB.


Vendor: Cisco
Mib: CISCO-ITP-GACT-MIB  [download]  [view objects]
Tool: ActiveXperts Network Monitor 2019 [download]    (ships with advanced SNMP/MIB tools)
-- *****************************************************************   
-- CISCO-ITP-GACT-MIB: MIB Accounting information for SS7
--
-- September 2002, John Linton, Shekhar Acharya
--
-- Copyright (c) 2002-2003 by Cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************
--   
-- *****************************************************************
CISCO-ITP-GACT-MIB DEFINITIONS ::= BEGIN

IMPORTS
        MODULE-IDENTITY,
        OBJECT-TYPE,
        Counter32
                FROM SNMPv2-SMI
                
        MODULE-COMPLIANCE,
        OBJECT-GROUP
                FROM SNMPv2-CONF
         
        cgspInstNetwork
                FROM CISCO-ITP-GSP-MIB
                
        CItpTcGlobalTitleSelectorName,
        CItpTcGtaLongAddr,
        CItpTcLinksetId,
        CItpTcPointCode,
        CItpTcServiceIndicator
                FROM CISCO-ITP-TC-MIB
       
        ciscoMgmt
                FROM CISCO-SMI;        
                
ciscoGactMIB MODULE-IDENTITY
        LAST-UPDATED    "200303030000Z"
        ORGANIZATION    "Cisco Systems, Inc."
        CONTACT-INFO
                "       Cisco Systems, Inc
                        Customer Service

                Postal: 170 W. Tasman Drive
                        San Jose, CA  95134
                        USA

                   Tel: +1 800 553-NETS

                E-mail: cs-ss7@cisco.com"
        DESCRIPTION
               "The MIB for providing information specified
                in ITU Q752 Monitoring and Measurements for
                Signalling System No. 7(SS7) Network. 
                This information can be used to manage messages
                transported over SS7 Network via Cisco IP 
                Transfer Point.  
                
                The Cisco IP Transfer Point (ITP) is a hardware 
                and software solution that transports SS7 traffic 
                using IP. Each ITP node provides function similar
                to SS7 signalling point.   
                
                The relevant ITU documents describing this technology
                is the ITU Q series, including ITU Q.700: Introduction
                to CCITT Signalling System No. 7 and ITU Q.701 
                Functional description of the message transfer part
                (MTP) of Signalling System No. 7."
                
        REVISION        "200303030000Z"
        DESCRIPTION
                "Initial version of this MIB module."
        ::= { ciscoMgmt 333 }


-- Top-level structure of the MIB
cgactMIBNotifs      OBJECT IDENTIFIER ::= { ciscoGactMIB    0 }
cgactMIBObjects     OBJECT IDENTIFIER ::= { ciscoGactMIB    1 }
cgactMIBConform     OBJECT IDENTIFIER ::= { ciscoGactMIB    2 }

cgactMtp3           OBJECT IDENTIFIER ::= { cgactMIBObjects 1 }
cgactGtt            OBJECT IDENTIFIER ::= { cgactMIBObjects 2 }

--  *************************************************************
--  *                                                           *
--  * SP - Mtp3 Accounting Table                                *
--  *                                                           *
--  * This table supports Q752/6.6 and Q752/6.7                 *
--  *************************************************************
cgactMtp3Table              OBJECT-TYPE
    SYNTAX                  SEQUENCE OF CgactMtp3TableEntry 
    MAX-ACCESS              not-accessible
    STATUS                  current
    DESCRIPTION
           "This table contains information about the number
            of packets and bytes at the MTP3 transport layer.  
            The information collected from both directions(send
            and receive). The information is broken down 
            by linkset, Destination Point Code (DPC),
            Originating Point Code (OPC) and Signalling 
            Indicator (SI). This provides the lowest granularity 
            required by Q752 and allows network management 
            stations to calculate the required fields in Q752." 
    ::= { cgactMtp3 1 }

cgactMtp3TableEntry               OBJECT-TYPE
    SYNTAX                        CgactMtp3TableEntry 
    MAX-ACCESS                    not-accessible
    STATUS                        current
    DESCRIPTION
            "A list of MTP3 accounting objects.  Objects are
             created in this table as traffic is received
             and processed. "
    INDEX   {
            cgspInstNetwork,
            cgactMtp3TableId,
            cgactMtp3LinksetName,
            cgactMtp3Dpc,
            cgactMtp3Opc,
            cgactMtp3SI
    }
    ::= { cgactMtp3Table  1 }

CgactMtp3TableEntry ::= SEQUENCE {
    cgactMtp3TableId                   INTEGER,
    cgactMtp3LinksetName               CItpTcLinksetId,
    cgactMtp3Dpc                       CItpTcPointCode,
    cgactMtp3Opc                       CItpTcPointCode,
    cgactMtp3SI                        CItpTcServiceIndicator,
    cgactMtp3InPackets                 Counter32,
    cgactMtp3OutPackets                Counter32,
    cgactMtp3InOctets                  Counter32,
    cgactMtp3OutOctets                 Counter32
}

cgactMtp3TableId                OBJECT-TYPE
    SYNTAX                       INTEGER {
                                      passed(1), 
                                      violation(2),
                                      unroutable(3) 
                                  }
    MAX-ACCESS                    not-accessible
    STATUS                        current
    DESCRIPTION
       "The accounting table identifier.
       'passed'    : signifies that this table instance
                     represents statistics for packets that
                     matched an Access Control List (ACL) in
                     the linkset's inbound ACL and in the 
                     outbound ACL.
                     
       'violation' : signifies that this table instance
                     represents statistics for packets that
                     did not match an ACL in the linkset's
                     inbound ACL and in the outbound ACL.
                     
       'unroutable' : packets that pass access list verification
                      but can not be sent to destination point
                      code.  This could be caused by incorrect
                      or missing route statements or inaccessible
                      destination."
    ::= { cgactMtp3TableEntry  1 }

cgactMtp3LinksetName              OBJECT-TYPE
    SYNTAX                        CItpTcLinksetId 
    MAX-ACCESS                    not-accessible 
    STATUS                        current
    DESCRIPTION
            "The name of the linkset."
    ::= { cgactMtp3TableEntry  2 }

cgactMtp3Dpc                      OBJECT-TYPE
    SYNTAX                        CItpTcPointCode 
    MAX-ACCESS                    not-accessible
    STATUS                        current
    DESCRIPTION
            "The destination point code."
    ::= { cgactMtp3TableEntry  3 }

cgactMtp3Opc                      OBJECT-TYPE
    SYNTAX                        CItpTcPointCode 
    MAX-ACCESS                    not-accessible
    STATUS                        current
    DESCRIPTION
            "The origin point code."
    ::= { cgactMtp3TableEntry  4 }
        
cgactMtp3SI                       OBJECT-TYPE
    SYNTAX                        CItpTcServiceIndicator 
    MAX-ACCESS                    not-accessible
    STATUS                        current
    DESCRIPTION
           "The service indicator."
    ::= { cgactMtp3TableEntry  5 }

cgactMtp3InPackets                OBJECT-TYPE
    SYNTAX                        Counter32
    UNITS                         "packets"
    MAX-ACCESS                    read-only
    STATUS                        current
    DESCRIPTION
           "The accumulated number of packets that have been received 
            by this linkset, DPC and OPC combination since system
            startup."
    ::= { cgactMtp3TableEntry  6 }

cgactMtp3OutPackets               OBJECT-TYPE
    SYNTAX                        Counter32
    UNITS                         "packets"
    MAX-ACCESS                    read-only
    STATUS                        current
    DESCRIPTION
           "The accumulated number of packets that have been sent 
            using this linkset, DPC and OPC combination since system
            startup."
    ::= { cgactMtp3TableEntry  7 }

cgactMtp3InOctets                 OBJECT-TYPE
    SYNTAX                        Counter32
    UNITS                         "octets"
    MAX-ACCESS                    read-only
    STATUS                        current
    DESCRIPTION
           "The accumulated number of bytes that have been received 
            using this linkset, DPC and OPC combination since system
            startup."
    ::= { cgactMtp3TableEntry  8 }

cgactMtp3OutOctets                OBJECT-TYPE
    SYNTAX                        Counter32
    UNITS                         "octets"
    MAX-ACCESS                    read-only
    STATUS                        current
    DESCRIPTION
           "The accumulated number of bytes that have been sent 
            using this linkset, DPC and OPC combination since 
            system startup."
    ::= { cgactMtp3TableEntry  9 }
    



--  *************************************************************
--  *                                                           *
--  * Global Title Translation - Accounting Table               *
--  *                                                           *
--  *************************************************************
cgactGttTable               OBJECT-TYPE
    SYNTAX                  SEQUENCE OF CgactGttTableEntry 
    MAX-ACCESS              not-accessible
    STATUS                  current
    DESCRIPTION
           "This table contains information about the number
            of packets and octets required for global title 
            translation."
    ::= { cgactGtt 1 }

cgactGttTableEntry                OBJECT-TYPE
    SYNTAX                        CgactGttTableEntry 
    MAX-ACCESS                    not-accessible
    STATUS                        current
    DESCRIPTION
            "A list of Global Title Translation accounting objects.
             Objects are created in this table when MTP3 packets are 
             received requiring global title translation. "
    INDEX   {
             cgspInstNetwork,
             cgactGttLinksetName,
             cgactGttSelectorName,
             cgactGttGta,
             cgactGttTranslatedPc
    }
    ::= { cgactGttTable  1 }

CgactGttTableEntry ::= SEQUENCE {
        cgactGttLinksetName    CItpTcLinksetId,
        cgactGttSelectorName   CItpTcGlobalTitleSelectorName,
        cgactGttGta            CItpTcGtaLongAddr,
        cgactGttTranslatedPc   CItpTcPointCode,
        cgactGttPackets        Counter32,
        cgactGttOctets          Counter32
}


cgactGttLinksetName               OBJECT-TYPE
    SYNTAX                        CItpTcLinksetId 
    MAX-ACCESS                    not-accessible 
    STATUS                        current
    DESCRIPTION
            "The name of the linkset."
    ::= { cgactGttTableEntry  1 }
            
cgactGttSelectorName              OBJECT-TYPE
    SYNTAX                        CItpTcGlobalTitleSelectorName
    MAX-ACCESS                    not-accessible
    STATUS                        current
    DESCRIPTION
            "The Global Title Selector Name."
    ::= { cgactGttTableEntry  2 }

cgactGttGta                       OBJECT-TYPE
    SYNTAX                        CItpTcGtaLongAddr
    MAX-ACCESS                    not-accessible
    STATUS                        current
    DESCRIPTION
            "The Global Title Address."
    ::= { cgactGttTableEntry  3 }

cgactGttTranslatedPc              OBJECT-TYPE
    SYNTAX                        CItpTcPointCode 
    MAX-ACCESS                    not-accessible
    STATUS                        current
    DESCRIPTION
            "The translated point code."
    ::= { cgactGttTableEntry  4 }
    
cgactGttPackets                   OBJECT-TYPE
    SYNTAX                        Counter32
    UNITS                         "packets"
    MAX-ACCESS                    read-only
    STATUS                        current
    DESCRIPTION
           "The accumulated number of packets received by this 
            signalling point requiring global title translation
            since system startup."
    ::= { cgactGttTableEntry  5 }
    
cgactGttOctets                    OBJECT-TYPE
    SYNTAX                        Counter32
    UNITS                         "octets"
    MAX-ACCESS                    read-only
    STATUS                        current
    DESCRIPTION
           "The accumulated number of bytes received by this 
            signalling point requiring global title translation
            since system startup."
    ::= { cgactGttTableEntry  6 }

-- *************************************************************
-- *                                                           *
-- * Conformance Information                                   *
-- *                                                           *
-- *************************************************************
ciscoGactMIBCompliances OBJECT IDENTIFIER ::= { cgactMIBConform 1 }
ciscoGactMIBGroups      OBJECT IDENTIFIER ::= { cgactMIBConform 2 }

-- Compliance

ciscoGactMIBCompliance MODULE-COMPLIANCE
    STATUS current
    DESCRIPTION
            "The compliance statement for entities which implement
            the Cisco SP MIB"
    MODULE -- this module
            MANDATORY-GROUPS {
                    ciscoGactMtp3Group,
                    ciscoGactGttGroup
            }
    ::= { ciscoGactMIBCompliances 1 }

-- Units of Conformance

ciscoGactMtp3Group OBJECT-GROUP       
    OBJECTS {
              cgactMtp3InPackets,
              cgactMtp3OutPackets,
              cgactMtp3InOctets,
              cgactMtp3OutOctets
    }
    STATUS current
    DESCRIPTION
       "A collection of objects providing MTP3 accounting feature."
    ::= { ciscoGactMIBGroups 1 }
    
ciscoGactGttGroup OBJECT-GROUP       
    OBJECTS {
              cgactGttPackets,
              cgactGttOctets
    }
    STATUS current
    DESCRIPTION
        "A collection of objects providing Global Title Translation 
         accounting feature."
    ::= { ciscoGactMIBGroups 2 }
    
END