You are here:

MonitorTools.com > Technical documentation > SNMP > MIB > Enterasys Networks > ENTERASYS-MAC-LOCKING-MIB
ActiveXperts Network Monitor 2019##AdminFavorites

ENTERASYS-MAC-LOCKING-MIB by vendor Enterasys Networks

ENTERASYS-MAC-LOCKING-MIB file content

The SNMP protocol is used to for conveying information and commands between agents and managing entities. SNMP uses the User Datagram Protocol (UDP) as the transport protocol for passing data between managers and agents. The reasons for using UDP for SNMP are, firstly it has low overheads in comparison to TCP, which uses a 3-way hand shake for connection. Secondly, in congested networks, SNMP over TCP is a bad idea because TCP in order to maintain reliability will flood the network with retransmissions.

Management information (MIB) is represented as a collection of managed objects. These objects together form a virtual information base called MIB. An agent may implement many MIBs, but all agents must implement a particular MIB called MIB-II [16]. This standard defines variables for things such as interface statistics (interface speeds, MTU, octets sent, octets received, etc.) as well as various other things pertaining to the system itself (system location, system contact, etc.). The main goal of MIB-II is to provide general TCP/IP management information.

Use ActiveXperts Network Monitor 2019 to import vendor-specific MIB files, inclusing ENTERASYS-MAC-LOCKING-MIB.


Vendor: Enterasys Networks
Mib: ENTERASYS-MAC-LOCKING-MIB  [download]  [view objects]
Tool: ActiveXperts Network Monitor 2019 [download]    (ships with advanced SNMP/MIB tools)
ENTERASYS-MAC-LOCKING-MIB DEFINITIONS ::= BEGIN

--  enterasys-mac-locking-mib.txt
--
--  Part Number: <TBD>
--
--

--  This module provides authoritative definitions for Enterasys
--  Networks' MAC Locking MIB.

--
--  This module will be extended, as needed.

--  Enterasys Networks reserves the right to make changes in this
--  specification and other information contained in this document
--  without prior notice.  The reader should consult Enterasys Networks
--  to determine whether any such changes have been made.
--
--  In no event shall Enterasys Networks be liable for any incidental,
--  indirect, special, or consequential damages whatsoever (including
--  but not limited to lost profits) arising out of or related to this
--  document or the information contained in it, even if Enterasys
--  Networks has been advised of, known, or should have known, the
--  possibility of such damages.
--
--  Enterasys Networks grants vendors, end-users, and other interested
--  parties a non-exclusive license to use this Specification in
--  connection with the management of Enterasys Networks products.

--  Copyright February, (2002-2003) Enterasys Networks, Inc.

IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Unsigned32
        FROM SNMPv2-SMI
    MacAddress, RowStatus, TruthValue
        FROM SNMPv2-TC
    MODULE-COMPLIANCE, OBJECT-GROUP
        FROM SNMPv2-CONF
    InterfaceIndex
        FROM IF-MIB
    EnabledStatus
        FROM P-BRIDGE-MIB
    etsysModules
        FROM ENTERASYS-MIB-NAMES;

etsysMACLockingMIB MODULE-IDENTITY
    LAST-UPDATED "200307301545Z"  -- Wed Jul 30 15:45 GMT 2003
    ORGANIZATION "Enterasys Networks, Inc"
    CONTACT-INFO
        "Postal:  Enterasys Networks
                  50 Minuteman Rd.
                  Andover, MA 01810-1008
                  USA
         Phone:   +1 978 684 1000
         E-mail:  support@enterasys.com
         WWW:     http://www.enterasys.com"

    DESCRIPTION
        "This MIB module defines the portion of the SNMP enterprise
         MIBs under Enterasys Networks' enterprise OID pertaining to
         MAC Locking.

         This MIB is designed to provide configuration and status
         objects pertaining to per port MAC Locking."

    REVISION "200307301545Z"  -- Wed Jul 30 15:45 GMT 2003
    DESCRIPTION
        "Updated the description clause for the 
         etsysMACLockingMoveFirstArrivalToStatic object."

    REVISION "200301172114Z"  -- Fri Jan 17 21:14 GMT 2003
    DESCRIPTION
        "Added objects to support the transition of dynamically
         locked MAC addresses to statically locked addresses."

    REVISION "200208052030Z"  -- Mon Aug  5 20:30 GMT 2002
    DESCRIPTION
        "Added more descriptive text and corrected two range
         issues in the description of the allocated objects."

    REVISION "200208011445Z"  -- Thu Aug  1 14:45 GMT 2002
    DESCRIPTION
        "The initial version of this MIB module."

    ::= { etsysModules 21 }


etsysMACLockingObjects
        OBJECT IDENTIFIER ::= { etsysMACLockingMIB 1 }

-- -------------------------------------------------------------
-- Textual Conventions
-- -------------------------------------------------------------

-- -------------------------------------------------------------
-- Branches of the Enterasys MAC Locking MIB
-- -------------------------------------------------------------

etsysMACLockingSystemBranch
        OBJECT IDENTIFIER ::= { etsysMACLockingObjects 1 }

etsysMACLockingPortConfigBranch
        OBJECT IDENTIFIER ::= { etsysMACLockingObjects 2 }

etsysMACLockingStaticStationBranch
        OBJECT IDENTIFIER ::= { etsysMACLockingObjects 3 }

etsysMACLockingStationBranch
        OBJECT IDENTIFIER ::= { etsysMACLockingObjects 4 }

etsysMACLockingTrapBranch
        OBJECT IDENTIFIER ::= { etsysMACLockingObjects 0 }

-- -------------------------------------------------------------
-- MAC Locking System Branch
-- -------------------------------------------------------------

etsysMACLockingSystemEnable  OBJECT-TYPE
    SYNTAX        EnabledStatus
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION
        "This object is a configuration convenience.
         While disabled(2), all per port configuration is
         ignored, but changeable. When set to enabled(1),
         the per port configuration becomes active."
    DEFVAL { disabled }
    ::= { etsysMACLockingSystemBranch 1 }


-- -------------------------------------------------------------
-- The Port Based Configuration MAC Locking Table
-- -------------------------------------------------------------

etsysMACLockingPortTable OBJECT-TYPE
    SYNTAX        SEQUENCE OF EtsysMACLockingPortEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "A table that provides for the configuration
         of MAC Locking for each port. Regardless of
         the value of etsysMACLockingSystemEnable,
         this table is automatically populated with
         one row per supported port.  
         MAC Locking is not supported on media types 
         whose addresses cannot be adequately 
         represented by the MacAddress convention"
    ::= { etsysMACLockingPortConfigBranch 1 }

etsysMACLockingPortEntry OBJECT-TYPE
    SYNTAX        EtsysMACLockingPortEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "Each conceptual row allows control over whether MAC
         locking is enabled for the port corresponding to the
         row. Similarly, each row provides control over whether
         violation traps are sent. Information in this table
         is persistent."
    INDEX { etsysMACLockingPort }
    ::= { etsysMACLockingPortTable 1 }

EtsysMACLockingPortEntry::=
    SEQUENCE {
     etsysMACLockingPort                            InterfaceIndex,
     etsysMACLockingEnable                          EnabledStatus,
     etsysMACLockingViolationEnable                 EnabledStatus,
     etsysMACLockingLastViolationAddress            MacAddress,
     etsysMACLockingFirstArrivalStationsAllowed     Unsigned32,
     etsysMACLockingFirstArrivalStationsAllocated   Unsigned32,
     etsysMACLockingStaticStationsAllowed           Unsigned32,
     etsysMACLockingStaticStationsAllocated         Unsigned32,
     etsysMACLockingMoveFirstArrivalToStatic        TruthValue, 
     etsysMACLockingStaticStationsCount             Unsigned32,
     etsysMACLockingClearStaticStations             TruthValue
    }

etsysMACLockingPort OBJECT-TYPE
    SYNTAX        InterfaceIndex
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "The interface number for this row."
    ::= { etsysMACLockingPortEntry 1 }

etsysMACLockingEnable  OBJECT-TYPE
    SYNTAX        EnabledStatus
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION
        "When set to enabled(1) any static entries currently created
         on this port become active and the first n MACs which are
         received on this port are locked, where n is equal to
         etsysMACLockingFirstArrivalStationsAllocated.

         When set to disabled(2), all entries in the 
         etsysMACLockingStationTable are cleared, and 
         the port forwards without regard to MAC locking."
    DEFVAL { disabled }
    ::= { etsysMACLockingPortEntry 2 }

etsysMACLockingViolationEnable OBJECT-TYPE
    SYNTAX        EnabledStatus
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION
        "When set to enabled(1), the agent issues violation traps
         for violations detected by the agent.

         Arrival of violation traps at the management station is not
         guaranteed and the trap generation rate is not required to
         match the violation detection rate. A best effort delivery is
         acceptable.

         When disabled(2), no traps are sent."
    DEFVAL { disabled }
    ::= { etsysMACLockingPortEntry 3 }

etsysMACLockingLastViolationAddress OBJECT-TYPE
    SYNTAX        MacAddress
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The last source MAC received on this port which was a
         violation. A violation is defined to be when the maximum
         number of firstArrival entries exists for this port in the
         etsysMACLockingStationTable and the source MAC address of
         the received packet differs from all entries found for this
         port in the etsysMACLockingStationTable."
    ::= { etsysMACLockingPortEntry 4 }

etsysMACLockingFirstArrivalStationsAllowed OBJECT-TYPE
    SYNTAX        Unsigned32
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The agent sets this number for the benefit of management
         to use when determining the permissible range of values
         for the etsysMACLockingFirstArrivalStationsAllocated object.
         The default value of this object is device dependent."
    ::= { etsysMACLockingPortEntry 5 }

etsysMACLockingFirstArrivalStationsAllocated OBJECT-TYPE
    SYNTAX        Unsigned32
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION
        "Management sets this number in the range of 0 to
         etsysMACLockingFirstArrivalStationsAllowed. This number
         limits the number of locked MACs on this port using the
         first arrival method. The default value of this object
         SHOULD be the same as the default value of
         etsysMACLockingFirstArrivalStationsAllowed."
    ::= { etsysMACLockingPortEntry 6 }

etsysMACLockingStaticStationsAllowed OBJECT-TYPE
    SYNTAX        Unsigned32
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The agent sets this number for the benefit of management
         to use when determining the permissible range of values
         for the etsysMACLockingStaticStationsAllocated object.
         The default value of this object is device dependent."
    ::= { etsysMACLockingPortEntry 7 }

etsysMACLockingStaticStationsAllocated OBJECT-TYPE
    SYNTAX        Unsigned32
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION
        "Management sets this number in the range of 0 to
         etsysMACLockingStaticStationsAllowed. This limits
         the number of statically provisioned, locked MACs on
         this port. The default value of this object SHOULD
         be the same as the default value of
         etsysMACLockingStaticStationsAllowed."
    ::= { etsysMACLockingPortEntry 8 }

etsysMACLockingMoveFirstArrivalToStatic OBJECT-TYPE
    SYNTAX        TruthValue
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION
        "When set to true(1), moves First Arrival MACs locked on
         the port, in lexigraphical order, into Statically Locked 
         MACs on the port. The move continues until all First 
         Arrival MACs are moved or until the number of allowable 
         static entries (etsysMACLockingStaticStationsAllocated) 
         has been exhausted.  If there is an insufficient number 
         Static entries available to accommodate all the First 
         Arrival MACs, then only the First Arrival MACs already 
         moved to statically locked MACs will be static entries, 
         the remaining First Arrival MACs will remain as First
         Arrival entries and a MIB_ERROR is returned. When read this 
         object will always return false(2)."
    ::= { etsysMACLockingPortEntry 9 }

etsysMACLockingStaticStationsCount OBJECT-TYPE
    SYNTAX        Unsigned32
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "Returns the number of Statically Locked MACs currently 
         locked on the port."
    ::= { etsysMACLockingPortEntry 10 }

etsysMACLockingClearStaticStations OBJECT-TYPE
    SYNTAX        TruthValue
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION
        "When set to true(1), clears out all the Statically 
         Locked MACs on this port.  When read this object will
         always return false(2)."
    ::= { etsysMACLockingPortEntry 11 }

-- -------------------------------------------------------------
-- The Station Based Static MAC Locking Table
-- -------------------------------------------------------------

etsysMACLockingStaticStationTable OBJECT-TYPE
    SYNTAX        SEQUENCE OF EtsysMACLockingStaticStationEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "This table lists all statically locked MAC addresses for
         each port. When MAC locking is enabled on a
         port, all active rows in this table will appear in
         the etsysMACLockingStationTable with the object
         etsysMACLockingLockedEntryCause set to static(2).
         Rows in this table are persistent between resets."
    ::= { etsysMACLockingStaticStationBranch 1 }

etsysMACLockingStaticStationEntry OBJECT-TYPE
    SYNTAX        EtsysMACLockingStaticStationEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "Each conceptual row contains a user specified
         locked MAC address."
    INDEX { etsysMACLockingPort, etsysMACLockingLockedAddress }
    ::= { etsysMACLockingStaticStationTable 1 }

EtsysMACLockingStaticStationEntry::=
    SEQUENCE {
     etsysMACLockingLockedAddress           MacAddress,
     etsysMACLockingStaticEntryRowStatus    RowStatus
    }

etsysMACLockingLockedAddress OBJECT-TYPE
    SYNTAX        MacAddress
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "The MAC that has been locked to this port."
    ::= { etsysMACLockingStaticStationEntry 1 }

etsysMACLockingStaticEntryRowStatus OBJECT-TYPE
    SYNTAX        RowStatus
    MAX-ACCESS    read-create
    STATUS        current
    DESCRIPTION
       "The status column has six defined values:

       - 'active', which indicates that a row shall
       also exist or be created in etsysMACLockingStationTable
       with the same index and the object
       etsysMACLockingLockedEntryCause in that row
       shall be static(1);

       - 'notInService', which indicates the existence or causes
       the creation of a row in this table. However, no
       corresponding row shall exist or be created in
       etsysMACLockingStationTable;

       - 'notReady', will never be read in any row of
       this table since existence is the only
       requirement for this tables rows;

       - 'createAndGo', which causes a new row to be
       created in both this table and in the
       etsysMACLockingStationTable with the same index
       and the object etsysMACLockingLockedEntryCause
       shall have the value static(1);

       - 'createAndWait', which causes a new row to be
       created in this table. However, no corresponding row
       shall be created in etsysMACLockingStationTable;
       and,

       - 'destroy', which causes the agent to remove
       this tables row along with the corresponding
       row in etsysMACLockingStationTable."
    ::= { etsysMACLockingStaticStationEntry 2 }


-- -------------------------------------------------------------
-- The Station Based MAC Locking Table
-- -------------------------------------------------------------

etsysMACLockingStationTable OBJECT-TYPE
    SYNTAX        SEQUENCE OF EtsysMACLockingStationEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "This table lists any locked MAC address for each
         port along with their entry types. On each port in
         the system, MACs can be locked. For each MAC locked
         to a port, a row appears in this table.

         When MAC locking is enabled on a port, the first
         n packets received by the port has it's source MAC
         locked to the port and the locked cause displays
         firstArrival(2) The value n is equal to the
         etsysMACLockingFirstArrivalStationsAllocated object.

         Additionally, management may explicitly lock a MAC to
         a port by using the etsysMACLockingStationStaticTable.
         For each entry in the static table, a corresponding
         entry appears in this table with it's
         etsysMACLockingLockedEntryCause object set to static(1)."
    ::= { etsysMACLockingStationBranch 1 }

etsysMACLockingStationEntry OBJECT-TYPE
    SYNTAX        EtsysMACLockingStationEntry
    MAX-ACCESS    not-accessible
    STATUS        current
    DESCRIPTION
        "Each conceptual row contains a locked cause which
         describes how the MAC was locked on the port.
         If etsysMACLockingSystemEnable is Disabled(2), then
         this table will be empty. This table contains entries
         for those ports which have MAC locking enabled and
         have locked MACs."
    INDEX { etsysMACLockingPort, etsysMACLockingLockedAddress }
    ::= { etsysMACLockingStationTable 1 }

EtsysMACLockingStationEntry::=
    SEQUENCE {
     etsysMACLockingLockedEntryCause INTEGER
    }

etsysMACLockingLockedEntryCause OBJECT-TYPE
    SYNTAX       INTEGER {
                   static(1),
                   firstArrival(2)
                   }
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "When management statically provisions a MAC onto this
         port, then this object is set to static(1), otherwise if
         this MAC was dynamically locked, then this object is set
         to firstArrival(2)."
    ::= { etsysMACLockingStationEntry 1 }


-- -------------------------------------------------------------
-- MAC Locking Trap Branch
-- -------------------------------------------------------------

etsysMACLockingMACViolation NOTIFICATION-TYPE
    OBJECTS { etsysMACLockingLastViolationAddress }
    STATUS  current
    DESCRIPTION
        "If MAC Locking is globally enabled and specifically
         enabled for this port, then this trap is sent when
         a packet is received with a source MAC that differs
         from all the currently locked MACs for the port
         specified in this instance of the notification."
    ::= { etsysMACLockingTrapBranch 1 }


-- -------------------------------------------------------------
-- Conformance Information
-- -------------------------------------------------------------

etsysMACLockingConformance
        OBJECT IDENTIFIER ::= { etsysMACLockingMIB 2 }

etsysMACLockingGroups
        OBJECT IDENTIFIER ::= { etsysMACLockingConformance 1 }

etsysMACLockingCompliances
        OBJECT IDENTIFIER ::= { etsysMACLockingConformance 2 }

-- -------------------------------------------------------------
-- Units of Conformance
-- -------------------------------------------------------------

etsysMACLockingSystemGroup OBJECT-GROUP
    OBJECTS { etsysMACLockingSystemEnable }
    STATUS  current
    DESCRIPTION
        "A collection of objects providing global configuration
         for the MAC Locking feature."
    ::= { etsysMACLockingGroups 1 }

etsysMACLockingPortGroup OBJECT-GROUP
    OBJECTS {
        etsysMACLockingEnable,
        etsysMACLockingViolationEnable,
        etsysMACLockingLastViolationAddress,
        etsysMACLockingFirstArrivalStationsAllowed,
        etsysMACLockingFirstArrivalStationsAllocated,
        etsysMACLockingStaticStationsAllowed,
        etsysMACLockingStaticStationsAllocated,
        etsysMACLockingMoveFirstArrivalToStatic,
        etsysMACLockingStaticStationsCount,
        etsysMACLockingClearStaticStations
            }
    STATUS  current
    DESCRIPTION
        "A collection of objects providing port based
         configuration and status of MAC Locking."
    ::= { etsysMACLockingGroups 2 }

etsysMACLockingStationGroup OBJECT-GROUP
    OBJECTS { etsysMACLockingLockedEntryCause }
    STATUS  current
    DESCRIPTION
        "A list of currently locked MACs."
    ::= { etsysMACLockingGroups 3 }

etsysMACLockingStaticStationGroup OBJECT-GROUP
    OBJECTS { etsysMACLockingStaticEntryRowStatus }
    STATUS  current
    DESCRIPTION
        "A list of statically provisioned locked MACs.
         This group is mandatory if static MAC locking
         is supported, otherwise it is optional."
    ::= { etsysMACLockingGroups 4 }


-- -------------------------------------------------------------
-- Compliance Statements
-- -------------------------------------------------------------

etsysMACLockingCompliance MODULE-COMPLIANCE
    STATUS  current
    DESCRIPTION
        "The compliance statement for devices that support MAC
         Locking."
    MODULE
        MANDATORY-GROUPS
            {
                etsysMACLockingSystemGroup,
                etsysMACLockingPortGroup,
                etsysMACLockingStationGroup
            }
        ::= { etsysMACLockingCompliances 1 }

END